Carbon nanotube characteristics and enhancement effects on the mechanical features of polymer-based materials and structures – A review
Open accessThe DOI matches its Crossref record; 72 of the 72 references it cites were found in a registry or an index.
Abstract
Carbon Nano Tubes (CNTs) are cylindrical structured rolled up sheets of graphene. The use of CNTs is observed as increasing immensely nowadays due to its tremendous characteristical properties. The low thermal expansion coefficient (CTE) of carbon nanotubes (CNTs), their high mechanical strength, high specific surface area (SSA), and high thermal conductivity strongly idealize them as a nanostructure for enhancing the physical properties of the fibre-reinforced polymer (FRP) materials for advanced applications such as microelectronic, chemical sensors, electromagnetic interference shielding (EMI), microwave absorption, hydrogen storage and aerospace. This review is comprised of the recent advancement in the fabrication of FRP by incorporated CNTs. Moreover, different functionalization techniques are analyzed to ensure uniform dispersion of CNTs and various fabrication routes were opted to enhance the overall performance of the CNTs incorporated FRPs composites. Common characterization techniques such as scanning electron spectroscopy (SEM), Differential scanning calorimetry (DSC), Thermal gravimetric analysis (TGA) and mechanical testing are discussed to study the influence of CNTs on physical and mechanical properties of CNTs incorporated FRP composite. Furthermore, comprehensive and descriptive overview of complex characterization techniques including Brillouin scattering, Raman spectroscopy, transmission electron microscopy (TEM), Dynamic light scattering (DLS), X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR), is also covered in the scope of this paper which are used for studying influence of CNTs on the properties of FRP composites. This review will facilitate upcoming researchers to choose the most appropriate functionalization method of CNTs, optimized fabrication route for composite synthesis, essential characterization techniques for evaluating the performance as per required applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Helical microtubules of graphitic carbon
Iijima, S. (1991) · Nature · doi:10.1038/354056a0 · Cited by 43,098
Carbon Nanotubes: Present and Future Commercial Applications
De Volder, M. F. L., Tawfick, S. H., Baughman, R. H., & Hart, A. J. (2013) · Science · doi:10.1126/science.1222453 · Cited by 5,587
Crystalline Ropes of Metallic Carbon Nanotubes
Thess, A., Lee, R., Nikolaev, P., Dai, H., Petit, P., Robert, J., Xu, C., Lee, Y. H., Kim, S. G., Rinzler, A. G., et al. (1996) · Science · doi:10.1126/science.273.5274.483 · Cited by 5,580
Strength and Breaking Mechanism of Multiwalled Carbon Nanotubes Under Tensile Load
Yu, M.-F., Lourie, O., Dyer, M. J., Moloni, K., Kelly, T. F., & Ruoff, R. S. (2000) · Science · doi:10.1126/science.287.5453.637 · Cited by 5,310
Physical Properties of Carbon Nanotubes
Saito, R., Dresselhaus, G., & Dresselhaus, M. S. (1998) · IMPERIAL COLLEGE PRESS eBooks · doi:10.1142/9781860943799 · Cited by 4,808
Raman spectroscopy of carbon nanotubes
Dresselhaus, M. S., Dresselhaus, G., Saito, R., & Jorio, A. (2005) · Physics Reports · doi:10.1016/j.physrep.2004.10.006 · Cited by 4,499
Small but strong: A review of the mechanical properties of carbon nanotube–polymer composites
Coleman, J. N., Khan, U., Blau, W. J., & Gun’ko, Y. K. (2006) · Carbon · doi:10.1016/j.carbon.2006.02.038 · Cited by 4,071
Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: A review
Ma, P.-C., Siddiqui, N. A., Marom, G., & Kim, J.-K. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.07.003 · Cited by 3,414
DNA-assisted dispersion and separation of carbon nanotubes
Zheng, M., Jagota, A., Semke, E. D., Diner, B. A., Mclean, R. S., Lustig, S. R., Richardson, R. E., & Tassi, N. G. (2003) · Nature Materials · doi:10.1038/nmat877 · Cited by 2,699
Applied Mechanics and Materials
(2026) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm · Cited by 2,575
(2026) · Key engineering materials · doi:10.4028/www.scientific.net/kem · Cited by 1,727
Load transfer in carbon nanotube epoxy composites
Schadler, L. S., Giannaris, S. C., & Ajayan, P. M. (1998) · Applied Physics Letters · doi:10.1063/1.122911 · Cited by 1,657
High resolution XPS characterization of chemical functionalised MWCNTs and SWCNTs
Okpalugo, T. I. T., Papakonstantinou, P., Murphy, H., McLaughlin, J., & Brown, N. M. D. (2005) · Carbon · doi:10.1016/j.carbon.2004.08.033 · Cited by 1,522
The role of surfactants in dispersion of carbon nanotubes
Vaisman, L., Wagner, H. D., & Marom, G. (2006) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2006.11.007 · Cited by 1,492
A review on carbon nanotubes and graphene as fillers in reinforced polymer nanocomposites
Mittal, G., Dhand, V., Rhee, K. Y., Park, S.-J., & Lee, W. R. (2015) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2014.03.022 · Cited by 1,371
Current Progress on the Chemical Modification of Carbon Nanotubes
Karousis, N., Tagmatarchis, N., & Tasis, D. (2010) · Chemical Reviews · doi:10.1021/cr100018g · Cited by 1,317
Carbon nanotubes: properties, synthesis, purification, and medical applications
Eatemadi, A., Daraee, H., Karimkhanloo, H., Kouhi, M., Zarghami, N., Akbarzadeh, A., Abasi, M., Hanifehpour, Y., & Joo, S. W. (2014) · Nanoscale Research Letters · doi:10.1186/1556-276x-9-393 · Cited by 1,239
Gouadec, G., & Colomban, P. (2007) · Progress in Crystal Growth and Characterization of Materials · doi:10.1016/j.pcrysgrow.2007.01.001 · Cited by 1,050
Carbon nanotube polymer composites
Andrews, R., & Weisenberger, M. C. (2004) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2003.10.006 · Cited by 921
Dispersion of Carbon Nanotubes: Mixing, Sonication, Stabilization, and Composite Properties
Huang, Y. Y., & Terentjev, E. M. (2012) · Polymers · doi:10.3390/polym4010275 · Cited by 701
Carbon nanotubes, science and technology part (I) structure, synthesis and characterisation
Aqel, A., El-Nour, K. M. M. A., Ammar, R. A. A., & Al-Warthan, A. (2012) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2010.08.022 · Cited by 615
Kwon, H., Estili, M., Takagi, K., Miyazaki, T., & Kawasaki, A. (2009) · Carbon · doi:10.1016/j.carbon.2008.10.041 · Cited by 589
The Implication of Using NVivo Software in Qualitative Data Analysis: Evidence-Based Reflections
Zamawe, F. (2015) · Malawi Medical Journal · doi:10.4314/mmj.v27i1.4 · Cited by 560
Carbon nanotube–polymer interactions in nanocomposites: A review
Rahmat, M., & Hubert, P. (2011) · Composites Science and Technology · doi:10.1016/j.compscitech.2011.10.002 · Cited by 474
Chen, J. H., Li, W. Z., Wang, D. Z., Yang, S. X., Wen, J. G., & Ren, Z. F. (2002) · Carbon · doi:10.1016/s0008-6223(01)00266-4 · Cited by 414
Soni, S. K., Thomas, B., & Kar, V. R. (2020) · Materials Today Communications · doi:10.1016/j.mtcomm.2020.101546 · Cited by 327
Kostopoulos, V., Baltopoulos, A., Karapappas, P., Vavouliotis, A., & Paipetis, A. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.11.023 · Cited by 281
Esawi, A. M. K., Morsi, K., Sayed, A., Taher, M., & Lanka, S. (2011) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.11.008 · Cited by 263
Arai, M., Noro, Y., Sugimoto, K.-I., & Endo, M. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2007.06.007 · Cited by 248
Carbon Nanotubes Properties and Applications
(2018) · Advances in Bioengineering and Biomedical Science Research · doi:10.33140/abbsr/01/01/00006 · Cited by 246
Mechanical properties of carbon nanotubes based polymer composites
Tarfaoui, M., Lafdi, K., & Moumen, A. E. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.08.016 · Cited by 230
Interfacial characteristics of carbon nanotube-polymer composites: A review
Chen, J., Yan, L., Song, W., & Xu, D. (2018) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2018.08.021 · Cited by 192
Silvestro, L., & Gleize, P. J. P. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.120237 · Cited by 188
Oxidative biodegradation of single- and multi-walled carbon nanotubes
Russier, J., Ménard-Moyon, C., Venturelli, E., Gravel, E., Marcolongo, G., Meneghetti, M., Doris, E., & Bianco, A. (2011) · Nanoscale · doi:10.1039/c0nr00779j · Cited by 178
Isolation of Aramid Nanofibers for High Strength and Toughness Polymer Nanocomposites
Lin, J., Bang, S. H., Malakooti, M. H., & Sodano, H. A. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b01488 · Cited by 167
Advanced electron microscopy characterization of nanomaterials for catalysis
Su, D. (2017) · Green Energy & Environment · doi:10.1016/j.gee.2017.02.001 · Cited by 166
Multiscale Hybrid Micro‐Nanocomposites Based on Carbon Nanotubes and Carbon Fibers
Inam, F., Wong, D. W. Y., Kuwata, M., & Peijs, T. (2010) · Journal of Nanomaterials · doi:10.1155/2010/453420 · Cited by 164
Approaching diamond’s theoretical elasticity and strength limits
Nie, A., Bu, Y., Li, P., Zhang, Y., Jin, T., Liu, J., Su, Z., Wang, Y., He, J., Liu, Z., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-13378-w · Cited by 160
Low Velocity and High Velocity Impact Test on Composite Materials - A review
Safri, S. N. A., Sultan, M. T. H., Yidris, N., & Mustapha, F. B. (2014) · Universiti Putra Malaysia Institutional Repository (Universiti Putra Malaysia) · Cited by 157
XPS characterization of nitrogen‐doped carbon nanotubes
Morant, C., Andrey, J., Prieto, P., Mendiola, D., Sanz, J. M., & Elizalde, E. (2006) · physica status solidi (a) · doi:10.1002/pssa.200566110 · Cited by 143
Applications of TGA in quality control of SWCNTs
Mansfield, E., Kar, A., & Hooker, S. A. (2009) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-009-3319-2 · Cited by 139
Kingston, C. T., Jakubek, Z. J., Dénommée, S., & Simard, B. (2004) · Carbon · doi:10.1016/j.carbon.2004.02.020 · Cited by 133
Diatoms Green Nanotechnology for Biosilica-Based Drug Delivery Systems
Terracciano, M., Stefano, L. D., & Rea, I. (2018) · Pharmaceutics · doi:10.3390/pharmaceutics10040242 · Cited by 119
Fracture toughness improvement of CFRP laminates by dispersion of cup-stacked carbon nanotubes
Yokozeki, T., Iwahori, Y., Ishibashi, M., Yanagisawa, T., Imai, K., Masahiro, A. R. A. I., Takahashi, T., & Enomoto, K. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.12.017 · Cited by 115
Mechanical properties of carbon nanotube reinforced polymer nanocomposites: A coarse-grained model
Arash, B., Park, H. S., & Rabczuk, T. (2015) · Composites Part B Engineering · doi:10.1016/j.compositesb.2015.05.038 · Cited by 115
Alian, A. R., Kundalwal, S. I., & Meguid, S. A. (2015) · Composite Structures · doi:10.1016/j.compstruct.2015.06.014 · Cited by 105
Blaysat, B., Hoefnagels, J. P. M., Gilles Lubineau, A., Alfano, M., & Geers, M. G. D. (2014) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2014.06.012 · Cited by 100
Predictions of the electro-mechanical response of conductive CNT-polymer composites
Matos, M. A. S., Tagarielli, V. L., Baiz, P. M., & Pinho, S. T. (2018) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2018.02.014 · Cited by 90
Frømyr, T. R., Hansen, F. K., & Olsen, T. (2012) · Journal of Nanotechnology · doi:10.1155/2012/545930 · Cited by 86
Yazdani, H., Smith, B. E., & Hatami, K. (2015) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.12.005 · Cited by 85
Yan, X., Gu, J., Zheng, G., Guo, J., Galaska, A. M., Yu, J., Khan, M. A., Sun, L., Young, D. P., Zhang, Q., et al. (2016) · Polymer · doi:10.1016/j.polymer.2016.09.056 · Cited by 81
High thermal conductive epoxy based composites fabricated by multi-material direct ink writing
Liu, J., Guo, Y., Weng, C., Zhang, H., & Zhang, Z. (2019) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.105684 · Cited by 72
Malekimoghadam, R., & Icardi, U. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107405 · Cited by 71
Hassanzadeh‐Aghdam, M. K., & Jamali, J. (2019) · Bulletin of Materials Science · doi:10.1007/s12034-019-1784-6 · Cited by 68
Double cantilever beam testing of multidirectional laminates
de Morais, A. B. (2003) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2003.08.008 · Cited by 66
Lee, J. Y., Kim, J. S., An, K.-H., et al. (2005) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2005.160 · Cited by 64
Hajilounezhad, T., Bao, R., Palaniappan, K., Bunyak, F., Calyam, P. P., & Maschmann, M. R. (2021) · npj Computational Materials · doi:10.1038/s41524-021-00603-8 · Cited by 62
Banerjee, D., Nguyen, T., & Chuang, T. (2016) · Computational Materials Science · doi:10.1016/j.commatsci.2015.12.026 · Cited by 60
Quantifying the Hierarchical Order in Self-Aligned Carbon Nanotubes from Atomic to Micrometer Scale
Meshot, E. R., Zwissler, D. W., Bui, N., Kuykendall, T., Wang, C., Hexemer, A., Wu, K. J., & Fornasiero, F. (2017) · ACS Nano · doi:10.1021/acsnano.6b08042 · Cited by 49
Fast Triggering of Shape Memory Polymers using an Embedded Carbon Nanotube Sponge Network
Zhou, G., Zhang, H., Xu, S., Gui, X., Wei, H., Leng, J., Koratkar, N. A., & Zhong, J. (2016) · Scientific Reports · doi:10.1038/srep24148 · Cited by 47
DNA-Assisted Dispersion of Carbon Nanotubes and Comparison with Other Dispersing Agents
Pramanik, D., & Maiti, P. K. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b06751 · Cited by 46
Hybrid and Synthetic FRP Composites under Different Strain Rates: A Review
Nejad, A. F., Salim, M. Y., Koloor, S. S. R., Petřík, S., Yahya, M. Y., Hassan, S. A., & Shah, M. K. M. (2021) · Polymers · doi:10.3390/polym13193400 · Cited by 37
Itatani, K., Tsugawa, T., Umeda, T., Musha, Y., Davies, I. J., & Koda, S. (2010) · Journal of the Ceramic Society of Japan · doi:10.2109/jcersj2.118.462 · Cited by 33
Singh, K. K., & Gaurav, A. K. (2018) · Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications · doi:10.1177/1464420718780890 · Cited by 32
Khatibi, E. S., Haghighi, M., & Mahboob, S. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2018.09.225 · Cited by 30
AFM imaging of functionalized double-walled carbon nanotubes
Lamprecht, C., Danzberger, J., Lukanov, P., Tîlmaciu, C., Galibert, A. M., Soula, B., Emmanuel Flahaut, B., Gruber, H. J., Hinterdorfer, P., Ebner, A., et al. (2009) · Ultramicroscopy · doi:10.1016/j.ultramic.2009.03.034 · Cited by 28
Wu, H., Xu, D.-M., Wang, Q., Wang, Q., Su, G.-Q., & Wei, X. (2007) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2007.09.073 · Cited by 26
Interaction forces between carbon nanotubes and an AFM tip
Decossas, S., Cappello, G., Poignant, G., Patrone, L., Bonnot, A. M., Comin, F., & Chevrier, J. (2001) · Europhysics Letters (EPL) · doi:10.1209/epl/i2001-00214-6 · Cited by 25
Giovannelli, A., Maio, D. D., & Scarpa, F. L. (2017) · Materials · doi:10.3390/ma10101222 · Cited by 23
Predicting stress–strain behavior of carbon nanotubes using neural networks
Košmerl, V., Štajduhar, I., & Čanađija, M. (2022) · Neural Computing and Applications · doi:10.1007/s00521-022-07430-y · Cited by 17
Multi-walled carbon nanotube thermal stability characteristics evaluation by DSC tests
Lin, C., Lin, J. Z., Shu, C., et al. (2011) · Journal of Loss Prevention in the Process Industries · doi:10.1016/j.jlp.2011.11.007 · Cited by 15
Cited by
Mane, P. V., Rego, R. M., Yap, P. L., Losic, D., & Kurkuri, M. D. (2024) · Progress in Materials Science · doi:10.1016/j.pmatsci.2024.101314 · Cited by 271
Metadata
- Authors
- Ali, A., Rahimian Koloor, S. S., Alshehri, A. H., & Arockiarajan, A.
- Venue
- Journal of Materials Research and Technology
- Publisher
- Elsevier BV
- Published
- 2023-05
- Volume
- 24
- Pages
- 6495-6521
- ISSN
- 2214-0697 (ISSN-L)
- 2238-7854
- OpenAlex
- W4366606516
- Cited by
- 231
- References
- 72
- FWCI
- 16.25
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.