The DOI matches its Crossref record; 72 of the 72 references it cites were found in a registry or an index.
Intelligent welding system technologies: State-of-the-art review and perspectives
Abstract
Abstract Welding systems are being transformed by the advent of modern information technologies such as the internet of things, big data, artificial intelligence, cloud computing, and intelligent manufacturing. Intelligent welding systems (IWS), making use of these technologies, are drawing attention from academic and industrial communities. Intelligent welding is the use of computers to mimic, strengthen, and/or replace human operators in sensing, learning, decision-making, monitoring and control, etc. This is accomplished by integrating the advantages of humans and physical systems into intelligent cyber systems. While intelligent welding has found pilot applications in industry, a systematic analysis of its components, applications, and future directions will help provide a unified definition of intelligent welding systems. This paper examines fundamental components and techniques necessary to make welding systems intelligent, including sensing and signal processing, feature extraction and selection, modeling, decision-making, and learning. Emerging technologies and their application potential to IWS will also be surveyed, including Industry 4.0, cyber-physical system (CPS), digital twins, etc. Typical applications in IWS will be surveyed, including weld design, task sequencing, robot path planning, robot programming, process monitoring and diagnosis, prediction, process control, quality inspection and assessment, human-robot collaboration, and virtual welding. Finally, conclusions and suggestions for future development will be proposed. This review is intended to provide a reference of the state-of-the-art for those seeking to introduce intelligent welding capabilities as they modernize their traditional welding stations, systems, and factories.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Journal of Physics: Conference Series
(2013) · Journal of Physics Conference Series · doi:10.1088/issn.1742-6596 · Cited by 15,679
IOP Conference Series: Materials Science and Engineering
(2022) · IOP Conference Series: Materials Science and Engineering · doi:10.1088/1757-899x/1231/1/011001 · Cited by 10,357
Machine learning: Trends, perspectives, and prospects
Jordan, M. I., & Mitchell, T. M. (2015) · Science · doi:10.1126/science.aaa8415 · Cited by 9,955
Åström, K. J., & Wittenmark, B. (1989) · Cited by 5,020
Industry 4.0: A survey on technologies, applications and open research issues
Lu, Y. (2017) · Journal of Industrial Information Integration · doi:10.1016/j.jii.2017.04.005 · Cited by 3,012
The scientist and engineer's guide to digital signal processing
Smith, S. W. (1997) · Cited by 2,799
Data-driven smart manufacturing
Tao, F., Qi, Q., Liu, A., & Kusiak, A. (2018) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2018.01.006 · Cited by 1,806
DIGITAL TWIN: MANUFACTURING EXCELLENCE THROUGH VIRTUAL FACTORY REPLICATION
Prof. RajratnaKharat*1, V. B. (2018) · Zenodo (CERN European Organization for Nuclear Research) · doi:10.5281/zenodo.1493929 · Cited by 1,753
Deep learning for smart manufacturing: Methods and applications
Wang, J., Ma, Y., Zhang, L., Gao, R. X., & Wu, D. (2018) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2018.01.003 · Cited by 1,740
Enabling technologies and tools for digital twin
Qi, Q., Tao, F., Hu, T., Anwer, N., Liu, A., Wei, Y., Wang, L., & Nee, A. Y. C. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2019.10.001 · Cited by 1,579
Kusiak, A. (2018) · International Journal of Production Research · doi:10.1080/00207543.2017.1351644 · Cited by 1,330
Machine learning in manufacturing: Advantages, challenges, and applications
Wuest, T., Weimer, D., Irgens, C., & Thoben, K.-D. (2016) · Production & Manufacturing Research · doi:10.1080/21693277.2016.1192517 · Cited by 1,319
Shaping the digital twin for design and production engineering
Schleich, B., Anwer, N., Mathieu, L., & Wartzack, S. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.04.040 · Cited by 1,305
Current status and advancement of cyber-physical systems in manufacturing
Wang, L., Törngren, M., & Onori, M. (2015) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2015.04.008 · Cited by 948
Efficient Machine Learning for Big Data: A Review
Al-Jarrah, O. Y., Yoo, P. D., Muhaidat, S., Karagiannidis, G. K., & Taha, K. (2015) · Big Data Research · doi:10.1016/j.bdr.2015.04.001 · Cited by 647
Toward New-Generation Intelligent Manufacturing
Zhou, J., Li, P., Zhou, Y., Wang, B., Zang, J., & Meng, L. (2018) · Engineering · doi:10.1016/j.eng.2018.01.002 · Cited by 636
Self-citationSmart manufacturing must embrace big data
Kusiak, A. (2017) · Nature · doi:10.1038/544023a · Cited by 618
An application framework of digital twin and its case study
Zheng, Y., Yang, S., & Cheng, H. (2019) · Journal of Ambient Intelligence and Humanized Computing · doi:10.1007/s12652-018-0911-3 · Cited by 593
IoT-Based Intelligent Perception and Access of Manufacturing Resource Toward Cloud Manufacturing
Tao, F., Zuo, Y., Xu, L. D., & Zhang, L. (2014) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2014.2306397 · Cited by 587
Symbiotic human-robot collaborative assembly
Wang, L., Gao, R., Váncza, J., Krüger, J., Wang, X. V., Makris, S., & Chryssolouris, G. (2019) · CIRP Annals · doi:10.1016/j.cirp.2019.05.002 · Cited by 565
Friction stir welding: Process, automation, and control
Gibson, B. T., Lammlein, D. H., Prater, T. J., Longhurst, W. R., Cox, C. D., Ballun, M. C., Dharmaraj, K. J., Cook, G. E., & Strauss, A. M. (2014) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2013.04.002 · Cited by 509
An Introduction to Feature Extraction
Guyon, I., & Elisseeff, A. (2008) · Studies in Fuzziness and Soft Computing · doi:10.1007/978-3-540-35488-8_1 · Cited by 504
Human–Cyber–Physical Systems (HCPSs) in the Context of New-Generation Intelligent Manufacturing
Zhou, J., Zhou, Y., Wang, B., & Zang, J. (2019) · Engineering · doi:10.1016/j.eng.2019.07.015 · Cited by 492
Self-citationHeading toward Artificial Intelligence 2.0
Pan, Y. (2016) · Engineering · doi:10.1016/j.eng.2016.04.018 · Cited by 433
Toward a blockchain cloud manufacturing system as a peer to peer distributed network platform
Li, Z., Barenji, A. V., & Huang, G. Q. (2018) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2018.05.011 · Cited by 334
Pacaux-Lemoine, M.-P., Trentesaux, D., Zambrano Rey, G., & Millot, P. (2017) · Computers & Industrial Engineering · doi:10.1016/j.cie.2017.05.014 · Cited by 315
An Effective Method of Weld Defect Detection and Classification Based on Machine Vision
Sun, J., Li, C., Wu, X.-J., Palade, V., & Fang, W. (2019) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2896357 · Cited by 253
Quality assessment in laser welding: a critical review
Stavridis, J., Papacharalampopoulos, A., & Stavropoulos, P. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-0461-4 · Cited by 238
Deep learning-based human motion recognition for predictive context-aware human-robot collaboration
Wang, P., Liu, H., Wang, L., & Gao, R. X. (2018) · CIRP Annals · doi:10.1016/j.cirp.2018.04.066 · Cited by 238
Review of laser welding monitoring
You, D. Y., Gao, X. D., & Katayama, S. (2014) · Science and Technology of Welding and Joining · doi:10.1179/1362171813y.0000000180 · Cited by 232
A State-of-the-Art Review on Solid-State Metal Joining
Cai, W., Daehn, G., Vivek, A., Li, J., Khan, H., Mishra, R. S., & Komarasamy, M. (2019) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4041182 · Cited by 192
Automated detection of welding defects in pipelines from radiographic images DWDI
Boaretto, N., & Centeno, T. M. (2017) · NDT & E International · doi:10.1016/j.ndteint.2016.11.003 · Cited by 181
Mishra, D., Roy, R. B., Dutta, S., Pal, S. K., & Chakravarty, D. (2018) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.10.016 · Cited by 177
Günther, J., Pilarski, P. M., Helfrich, G., Shen, H., & Diepold, K. (2016) · Mechatronics · doi:10.1016/j.mechatronics.2015.09.004 · Cited by 176
From Intelligence Science to Intelligent Manufacturing
Wang, L. (2019) · Engineering · doi:10.1016/j.eng.2019.04.011 · Cited by 168
A Smart Monitoring System for Automatic Welding Defect Detection
Sassi, P., Tripicchio, P., & Avizzano, C. A. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2896165 · Cited by 163
Research evolution on intelligentized technologies for arc welding process
Chen, S., & Lv, N. (2013) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2013.07.002 · Cited by 159
Doshi, A., Smith, R. T., Thomas, B. H., & Bouras, C. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-9164-5 · Cited by 159
Monitoring and Control of Manufacturing Processes: A Review
Stavropoulos, P. G., Chantzis, D., Doukas, C., Papacharalampopoulos, A., & Chryssolouris, G. (2013) · Procedia CIRP · doi:10.1016/j.procir.2013.06.127 · Cited by 143
Feature selection for manufacturing process monitoring using cross-validation
Shao, C., Paynabar, K., Kim, T. H., Jin, J. J., Hu, S. J., Spicer, J. P., Wang, H., & Abell, J. A. (2013) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2013.05.006 · Cited by 143
Self-citationAutomatic Detection of Welding Defects using Deep Neural Network
Hou, W., Wei, Y., Guo, J., Jin, Y., & Zhu, C. (2018) · Journal of Physics Conference Series · doi:10.1088/1742-6596/933/1/012006 · Cited by 130
Use of Machine Learning Algorithms for Weld Quality Monitoring using Acoustic Signature
Sumesh, A., Rameshkumar, K., N, M. K., & Babu, R. S. (2015) · Procedia Computer Science · doi:10.1016/j.procs.2015.04.042 · Cited by 129
A Survey of Blockchain Enabled Cyber-Physical Systems
Rathore, H., Mohamed, A. M. S., & Guizani, M. (2020) · Sensors · doi:10.3390/s20010282 · Cited by 121
Intelligent Computing Methods for Manufacturing Systems
Teti, R., & Kumara, S. R. T. (1997) · CIRP Annals · doi:10.1016/s0007-8506(07)60883-x · Cited by 117
Boldsaikhan, E., Corwin, E. M., Logar, A. M., & Arbegast, W. J. (2011) · Applied Soft Computing · doi:10.1016/j.asoc.2011.06.017 · Cited by 117
Multisensor Fusion System for Monitoring High-Power Disk Laser Welding Using Support Vector Machine
You, D., Gao, X., & Katayama, S. (2014) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2014.2309482 · Cited by 116
Virtual reality human-robot collaborative welding: A case study of weaving gas tungsten arc welding
Wang, Q., Cheng, Y., Jiao, W., Johnson, M. T., & Zhang, Y. (2019) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2019.10.016 · Cited by 112
Zhang, Z., & Chen, S. (2014) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-014-0971-y · Cited by 110
Investigating the use of spatial reasoning strategies in geometric problem solving
Buckley, J., Seery, N., & Canty, D. (2018) · International Journal of Technology and Design Education · doi:10.1007/s10798-018-9446-3 · Cited by 103
Zhang, Z., Chen, H., Xu, Y., Zhong, J., Lv, N., & Chen, S. (2015) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2014.12.021 · Cited by 96
Toward Welding Robot With Human Knowledge: A Remotely-Controlled Approach
Liu, Y., & Zhang, Y. (2014) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2014.2359006 · Cited by 91
Haptic and visual augmented reality interface for programming welding robots
Ni, D., Yew, A. W. W., Ong, S. K., & Nee, A. Y. C. (2017) · Advances in Manufacturing · doi:10.1007/s40436-017-0184-7 · Cited by 90
Kagermann, H., Wahlster, W., Helbig, J., & Hellinger, A. (2013) · Cited by 87
Müller, R. H., Vette, M., & Geenen, A. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.07.113 · Cited by 80
Welding penetration prediction with passive vision system
Chen, Z., Chen, J., & Feng, Z. (2018) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.10.009 · Cited by 78
Real-time monitoring of high-power disk laser welding statuses based on deep learning framework
Zhang, Y., You, D., Gao, X., Wang, C., Li, Y., & Gao, P. P. (2019) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-019-01477-w · Cited by 78
Intelligent Manufacturing Systems: A Review
Liang, S. Y., Rajora, M., Liu, X., Yue, C., Zou, P., & Wang, L. (2016) · International Journal of Mechanical Engineering and Robotics Research · doi:10.18178/ijmerr.7.3.324-330 · Cited by 57
Big Data-Driven Manufacturing—Process-Monitoring-for-Quality Philosophy
Abell, J. A., Chakraborty, D., Escobar, C. A., Im, K. H., Wegner, D. M., & Wincek, M. A. (2017) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4036833 · Cited by 52
Improving process robustness in ultrasonic metal welding of lithium-ion batteries
Nong, L., Shao, C., Kim, T. H., & Hu, S. J. (2018) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2018.04.014 · Cited by 51
Self-citationA State-of-the-Art Review on Solid-State Metal Joining
Cai, W., Daehn, G. S., Vivek, A., Li, J., Khan, H. A., Mishra, R. S., & Komarasamy, M. (2018) · ASME International Manufacturing Science and Engineering Conference (MSEC) · doi:10.1115/msec2018-6683 · Cited by 51
Knaak, C., Thombansen, U., Abels, P., & Kröger, M. (2018) · Procedia CIRP · doi:10.1016/j.procir.2018.08.073 · Cited by 49
Intelligentized Methodology for Arc Welding Dynamical Processes
Chen, S., & Wu, J. (2008) · Lecture notes in electrical engineering · doi:10.1007/978-3-540-85642-9 · Cited by 46
Ma, M., Lin, W., Pan, D., Lin, Y., Wang, P., Zhou, Y., & Liang, X. (2017) · Journal of Signal Processing Systems · doi:10.1007/s11265-017-1304-0 · Cited by 44
Prediction of friction stir weld quality without and with signal features
Huggett, D. J., Liao, T. W., Wahab, M. A., & Okeil, A. M. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-1403-x · Cited by 35
Tabar, R. S., Wärmefjord, K., & Söderberg, R. C. (2019) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1177/0954406219854466 · Cited by 34
Reinforcement learning approach to goal-regulation in a self-evolutionary manufacturing system
Shin, M., Ryu, K., & Jung, M. (2012) · Expert Systems with Applications · doi:10.1016/j.eswa.2012.01.207 · Cited by 33
Wuest, T. (2015) · Springer theses · doi:10.1007/978-3-319-17611-6 · Cited by 33
A Study on Development of Optimal Noise Filter Algorithm for Laser Vision System in GMA Welding
Wu, Q., Lee, J.-P., Park, M.-H., et al. (2014) · Procedia Engineering · doi:10.1016/j.proeng.2014.12.356 · Cited by 23
Data-Driven Welding Expert System Structure Based on Internet of Things
Chen, C., Lv, N., & Chen, S. (2018) · Transactions on intelligent welding manufacturing · doi:10.1007/978-981-10-8330-3_3 · Cited by 20
Tabar, R. S., Wärmefjord, K., & Söderberg, R. C. (2018) · Procedia CIRP · doi:10.1016/j.procir.2018.04.061 · Cited by 19
A Reinforcement Learning Based Approach for Welding Sequence Optimization
Romero-Hdz, J., Saha, B. N., Toledo-Ramirez, G., & López-Juárez, I. (2017) · Transactions on intelligent welding manufacturing · doi:10.1007/978-981-10-7043-3_2 · Cited by 12
Cited by
Digital twins-based smart manufacturing system design in Industry 4.0: A review
Leng, J., Wang, D., Shen, W., Li, X., Liu, Q., & Chen, X. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.05.011 · Cited by 766
A review on wire arc additive manufacturing: Monitoring, control and a framework of automated system
Xia, C., Pan, Z., Polden, J., Li, H., Xu, Y., Chen, S., & Zhang, Y. (2020) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.08.008 · Cited by 460
Proactive human–robot collaboration: Mutual-cognitive, predictable, and self-organising perspectives
Li, S., Zheng, P., Liu, S., Wang, Z., Wang, X. V., Zheng, L., & Wang, L. (2023) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2022.102510 · Cited by 265
Industrial Internet of Things Intelligence Empowering Smart Manufacturing: A Literature Review
Hu, Y., Jia, Q., Yao, Y., Lee, Y., Lee, M., Wang, C., Zhou, X., Xie, R., & Yu, F. R. (2024) · IEEE Internet of Things Journal · doi:10.1109/jiot.2024.3367692 · Cited by 256
Robotics in the Construction Sector: Trends, Advances, and Challenges
Liu, Y., A.H., A., Haron, N. A., N.A., B., & Wang, H. (2024) · Journal of Intelligent & Robotic Systems · doi:10.1007/s10846-024-02104-4 · Cited by 60
Metadata
- Authors
- Wang, B., Hu, S. J., Sun, L., & Freiheit, T.
- Venue
- Journal of Manufacturing Systems
- Publisher
- Elsevier BV
- Published
- 2020-07
- Volume
- 56
- Pages
- 373-391
- ISSN
- 0278-6125 (ISSN-L)
- OpenAlex
- W3041528150
- Cited by
- 425
- References
- 72
- FWCI
- 29.57
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.