The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.
Physics guided neural network for machining tool wear prediction
Abstract
Abstract Tool wear prediction is of significance to improve the safety and reliability of machining tools, given their widespread applications in nearly every branch of manufacturing. Mathematical modelling, including data driven modelling and physics-based modelling, is an important tool to predict the degree of tool wear. Howerver, the performance of conventional data driven models is restricted by the absent representation of physical inconsistency. The physics-based models usually fail to consider the complex tool cutting conditions and dynamic changes of physical parameters in practice. To address these issues, a novel physics guided neural network model is presented for tool wear prediction. Firstly, a cross physics-data fusion (CPDF) scheme is proposed as the modelling strategy to fuse the hidden information explored by a physics-based model and a data driven model. Secondly, the information hidden in the unlabelled sample is explored by the physics-based model of tool cutting, inspired by semi-supervised learning. Thirdly, a novel loss function which takes the physical discipline into account is proposed to evaluate the physical inconsistency quantitatively. The advantage of the developed method is that it explores sufficient information from both physics and data domains to eliminate the physical inconsistency existing in conventional data driven models.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Contact and Rubbing of Flat Surfaces
Archard, J. F. (1953) · Journal of Applied Physics · doi:10.1063/1.1721448 · Cited by 7,892
Theory-Guided Data Science: A New Paradigm for Scientific Discovery from Data
Karpatne, A., Atluri, G., Faghmous, J. H., Steinbach, M., Banerjee, A., Ganguly, A., Shekhar, S., Samatova, N., & Kumar, V. (2017) · IEEE Transactions on Knowledge and Data Engineering · doi:10.1109/tkde.2017.2720168 · Cited by 1,752
Physics-informed neural networks for inverse problems in nano-optics and metamaterials
Chen, Y., Lu, L., Karniadakis, G. E., & Dal Negro, L. (2020) · Optics Express · doi:10.1364/oe.384875 · Cited by 701
Digital twin-driven manufacturing cyber-physical system for parallel controlling of smart workshop
Leng, J., Zhang, H., Yan, D., Liu, Q., Chen, X., & Zhang, D. (2019) · Journal of Ambient Intelligence and Humanized Computing · doi:10.1007/s12652-018-0881-5 · Cited by 475
Methodologies for Cross-Domain Data Fusion: An Overview
Zheng, Y. (2015) · IEEE Transactions on Big Data · doi:10.1109/tbdata.2015.2465959 · Cited by 454
Identification of dynamic cutting force coefficients and chatter stability with process damping
Altıntaş, Y., Eynian, M., & Onozuka, H. (2008) · CIRP Annals · doi:10.1016/j.cirp.2008.03.048 · Cited by 358
Leng, J., Liu, Q., Ye, S., Jing, J., Wang, Y., Zhang, C., Zhang, D., & Chen, X. (2020) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2019.101895 · Cited by 342
Predictive large-eddy-simulation wall modeling via physics-informed neural networks
Yang, X. I. A., Zafar, S., Wang, J.-X., & Xiao, H. (2019) · Physical Review Fluids · doi:10.1103/physrevfluids.4.034602 · Cited by 286
Self-citationFuzzy Neural Network Modelling for Tool Wear Estimation in Dry Milling Operation
Li, X., Lim, B. S., Zhou, J., Huang, S., Phua, S. J., Shaw, K. C., & Er, M. J. (2009) · Annual Conference of the PHM Society · Cited by 158
Corne, R., Nath, C., Mansori, M. E., & Kurfess, T. R. (2017) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2017.01.004 · Cited by 147
Cited by
Li, H., Zhang, Z., Li, T., & Si, X. (2024) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2024.111120 · Cited by 374
Wu, Y., Sicard, B., & Gadsden, S. A. (2024) · Expert Systems with Applications · doi:10.1016/j.eswa.2024.124678 · Cited by 357
Wang, J., Li, Y., Gao, R. X., & Zhang, F. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2022.04.004 · Cited by 317
Self-citationMachine learning for metal additive manufacturing: Towards a physics-informed data-driven paradigm
Guo, S., Agarwal, M., Cooper, C., Tian, Q., Gao, R. X., Guo, W., & Guo, Y. B. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.11.003 · Cited by 309
Self-citationWang, H., Li, B., Gong, J., & Xuan, F.-Z. (2023) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2023.109242 · Cited by 281
Metadata
- Authors
- Wang, J., Li, Y., Zhao, R., & Gao, R. X.
- Venue
- Journal of Manufacturing Systems
- Publisher
- Elsevier BV
- Published
- 2020-10
- Volume
- 57
- Pages
- 298-310
- ISSN
- 0278-6125 (ISSN-L)
- OpenAlex
- W3093010392
- Cited by
- 299
- References
- 18
- FWCI
- 15.06
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Physics guided neural network for machining tool wear prediction. https://app.cochat.ai/papers/10.1016/j.jmsy.2020.09.005
- The paper
- Wang, J., Li, Y., Zhao, R., & Gao, R. X. (2020). Physics guided neural network for machining tool wear prediction. Journal of Manufacturing Systems. https://doi.org/10.1016/j.jmsy.2020.09.005
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.