The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Understanding High-Energy-Density Sn4P3 Anodes for Potassium-Ion Batteries
Open accessAbstract
Summary Phosphorus-based anodes for alkali metal-ion batteries are attractive due to their high theoretical-specific capacity. However, their poor electrochemical performance caused by relatively large volume variations during cycling, low electrical conductivity, and severe electrolyte decomposition due to highly reactive phosphide surface hinder their potential applications. Herein, we confine Sn 4 P 3 in N-doped carbon fibers as anode for potassium-ion batteries with enhanced cycling stability and high rate capability (160.7 mA hr g −1 after 1,000 cycles at 500 mA g −1 ). The Sn 4 P 3 anodes undergo a sequential conversion (P to K 3 P 11 , K 3 P) and alloying (Sn to KSn) reactions with synergistic K-storage mechanisms. Also, the electrolyte with potassium bis(fluorosulfonyl)imide salt can effectively suppress the dendrite growth in K stripping/plating, stabilize the solid-electrolyte interphase (SEI) layer, and avoid excessive side reactions, thus enhancing the electrode stability. This work provides a feasible approach to overcome the durability bottlenecks of K-ion batteries through regulating dendrite growth and SEI formation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrical energy storage for the grid: A battery of choices
Dunn, B., Kamath, H., & Tarascon, J.-M. (2011) · Science · doi:10.1126/science.1212741 · Cited by 15,072
Nitrogen-Doped Carbon Nanotube Arrays with High Electrocatalytic Activity for Oxygen Reduction
Gong, K., Du, F., Xia, Z., Durstock, M., & Dai, L. (2009) · Science · doi:10.1126/science.1168049 · Cited by 7,188
Research Development on Sodium-Ion Batteries
Yabuuchi, N., Kubota, K., Dahbi, M., & Komaba, S. (2014) · Chemical Reviews · doi:10.1021/cr500192f · Cited by 6,478
Where do batteries end and supercapacitors begin?
Simon, P., Gogotsi, Y., & Dunn, B. (2014) · Science · doi:10.1126/science.1249625 · Cited by 5,634
Slater, M. D., Kim, D., Lee, E., & Johnson, C. S. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200691 · Cited by 4,518
Carbon Electrodes for K-Ion Batteries
Jian, Z., Luo, W., & Ji, X. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b06809 · Cited by 1,866
Yang, C.-P., Yin, Y.-X., Zhang, S.-F., Li, N.-W., & Guo, Y.-G. (2015) · Nature Communications · doi:10.1038/ncomms9058 · Cited by 1,589
A phosphorene–graphene hybrid material as a high-capacity anode for sodium-ion batteries
Sun, J., Lee, H.-W., Pasta, M., Yuan, H., Zheng, G., Sun, Y., Li, Y., & Cui, Y. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2015.194 · Cited by 1,480
Recent advances in rechargeable battery materials: a chemist’s perspective
Palacín, M. R. (2009) · Chemical Society Reviews · doi:10.1039/b820555h · Cited by 1,423
Hard Carbon Microspheres: Potassium‐Ion Anode Versus Sodium‐Ion Anode
Jian, Z., Xing, Z., Bommier, C., Li, Z., & Ji, X. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501874 · Cited by 985
An Amorphous Red Phosphorus/Carbon Composite as a Promising Anode Material for Sodium Ion Batteries
Kim, Y., Park, Y., Choi, A., Choi, N., Kim, J., Lee, J., Ryu, J. H., Oh, S. M., & Lee, K. T. (2013) · Advanced Materials · doi:10.1002/adma.201204877 · Cited by 854
Phosphorus-Based Alloy Materials for Advanced Potassium-Ion Battery Anode
Zhang, W., Mao, J., Li, S., Chen, Z., & Guo, Z. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b12185 · Cited by 831
Self-citationDong, Y., Wu, Z.-S., Zheng, S., Wang, X., Qin, J., Wang, S., Shi, X., & Bao, X. (2017) · ACS Nano · doi:10.1021/acsnano.7b01165 · Cited by 656
Emerging Non-Aqueous Potassium-Ion Batteries: Challenges and Opportunities
Wu, X., Leonard, D. P., & Ji, X. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b01764 · Cited by 649
4.0 V Aqueous Li-Ion Batteries
Yang, C., Chen, J., Qing, T., Fan, X., Sun, W., von Cresce, A., Ding, M. S., Borodin, O., Vatamanu, J., Schroeder, M. A., et al. (2017) · Joule · doi:10.1016/j.joule.2017.08.009 · Cited by 560
Nitrogen-rich hard carbon as a highly durable anode for high-power potassium-ion batteries
Chen, C., Wang, Z., Zhang, B., Miao, L., Cai, J., Peng, L., Huang, Y., Jiang, J., Huang, Y., Zhang, L., et al. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2017.05.010 · Cited by 468
CoS Quantum Dot Nanoclusters for High‐Energy Potassium‐Ion Batteries
Gao, H., Zhou, T., Zheng, Y., Zhang, Q., Liu, Y., Chen, J., Liu, H., & Guo, Z. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201702634 · Cited by 457
Self-citationLiu, J., Kopold, P., Wu, C., van Aken, P. A., Maier, J., & Yu, Y. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02074c · Cited by 439
Tin Phosphide as a Promising Anode Material for Na‐Ion Batteries
Kim, Y., Kim, Y., Choi, A., Woo, S., Mok, D., Choi, N., Jung, Y. S., Ryu, J. H., Oh, S. M., & Lee, K. T. (2014) · Advanced Materials · doi:10.1002/adma.201305638 · Cited by 393
Free-Standing Hollow Carbon Fibers as High-Capacity Containers for Stable Lithium Metal Anodes
Liu, L., Yin, Y.-X., Li, J.-Y., Li, N.-W., Zeng, X.-X., Ye, H., Guo, Y.-G., & Wan, L.-J. (2017) · Joule · doi:10.1016/j.joule.2017.06.004 · Cited by 391
Zhou, J., Wang, L., Yang, M., Wu, J., Chen, F., Huang, W., Han, N., Ye, H., Zhao, F., Li, Y., et al. (2017) · Advanced Materials · doi:10.1002/adma.201702061 · Cited by 381
A Compact Nanoconfined Sulfur Cathode for High-Performance Lithium-Sulfur Batteries
Li, Z., Guan, B. Y., Zhang, J., & Lou, X. W. (. (2017) · Joule · doi:10.1016/j.joule.2017.06.003 · Cited by 295
Wang, H., Lin, D., Liu, Y., Li, Y., & Cui, Y. (2017) · Science Advances · doi:10.1126/sciadv.1701301 · Cited by 244
Pang, W. K., Kalluri, S., Peterson, V. K., Sharma, N., Kimpton, J. A., Johannessen, B., Liu, H., Dou, S. X., & Guo, Z. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b00943 · Cited by 160
Self-citation
Cited by
Approaching high-performance potassium-ion batteries via advanced design strategies and engineering
Zhang, W., Liu, Y., & Guo, Z. (2019) · Science Advances · doi:10.1126/sciadv.aav7412 · Cited by 1,158
Self-citationAdvancements and Challenges in Potassium Ion Batteries: A Comprehensive Review
Rajagopalan, R., Tang, Y., Ji, X., Jia, C., & Wang, H. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909486 · Cited by 883
Liu, W., Liu, P., & Mitlin, D. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002297 · Cited by 687
Advanced Carbon‐Based Anodes for Potassium‐Ion Batteries
Wu, X., Chen, Y., Xing, Z., Lam, C. W. K., Pang, S., Zhang, W., & Ju, Z. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900343 · Cited by 600
Self-citationCarbon-Based Fibers for Advanced Electrochemical Energy Storage Devices
Chen, S., Qiu, L., & Cheng, H.-M. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00466 · Cited by 555
Metadata
- Authors
- Zhang, W., Pang, W. K., Sencadas, V., & Guo, Z.
- Venue
- Joule
- Publisher
- Elsevier BV
- Published
- 2018-08
- Volume
- 2
- Issue
- 8
- Pages
- 1534-1547
- ISSN
- 2542-4351 (ISSN-L)
- OpenAlex
- W2803798942
- Cited by
- 555
- References
- 24
- FWCI
- 31.52
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.