The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Inhibiting Polysulfide Shuttling with a Graphene Composite Separator for Highly Robust Lithium-Sulfur Batteries
Open accessAbstract
Summary Lithium-sulfur (Li-S) batteries are of considerable interest for high-density energy storage. However, the adoption of Li-S batteries to date has been severely plagued by the polysulfide shuttling effect, whereby polysulfide molecules dissolve into the electrolyte and shuttle across the separator to react with the anode materials, leading to a rapidly fading capacity. Herein, by directly coating a thin layer of reduced graphene oxide (rGO)/sodium lignosulfonate (SL) composite on the standard polypropylene (PP) separator, we produce a rGO@SL/PP separator with abundant negatively charged sulfonic groups in the porous lignin network, which effectively suppress the translocation of the negatively charged polysulfide (PS) ions without compromising the transport of positively charged Li+ ions. Using the rGO@SL/PP separator, we demonstrate a highly robust Li-S battery with a capacity retention of 74% over 1,000 cycles. This study defines an effective strategy to inhibit the PS shuttling effect for highly robust Li-S batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Marenich, A. V., Cramer, C. J., & Truhlar, D. G. (2009) · The Journal of Physical Chemistry B · doi:10.1021/jp810292n · Cited by 17,843
Metal–organic framework-based separator for lithium–sulfur batteries
Bai, S., Liu, X., Zhu, K., Wu, S., & Zhou, H. (2016) · Nature Energy · doi:10.1038/nenergy.2016.94 · Cited by 1,333
Pang, Q., Kundu, D., Cuisinier, M., & Nazar, L. F. (2014) · Nature Communications · doi:10.1038/ncomms5759 · Cited by 1,318
Lal, M., & Barnes, H. A. (1990) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/0377-0257(90)85036-x · Cited by 1,202
Sun, Z., Zhang, J., Yin, L., Hu, G., Fang, R., Cheng, H.-M., & Li, F. (2017) · Nature Communications · doi:10.1038/ncomms14627 · Cited by 1,135
Wang, Z., Dong, Y., Li, H., Zhao, Z., Bin Wu, H., Hao, C., Liu, S., Qiu, J., & Lou, X. W. (2014) · Nature Communications · doi:10.1038/ncomms6002 · Cited by 1,059
Two-dimensional heterostructures for energy storage
Pomerantseva, E., & Gogotsi, Y. (2017) · Nature Energy · doi:10.1038/nenergy.2017.89 · Cited by 1,042
NANOSTRUCTURES AND NANOMATERIALS - Synthesis, Properties and Applications
Cao, G. (2004) · IMPERIAL COLLEGE PRESS eBooks · doi:10.1142/9781860945960 · Cited by 1,008
Ionic shield for polysulfides towards highly-stable lithium–sulfur batteries
Huang, J.-Q., Zhang, Q., Peng, H.-J., Liu, X.-Y., Qian, W.-Z., & Wei, F. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42223b · Cited by 679
Self-citationDeng, Z., Zhang, Z., Lai, Y., Liu, J., Li, J., & Liu, Y. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.026304jes · Cited by 674
Huang, J.-Q., Zhang, Q., & Wei, F. (2015) · Energy Storage Materials · doi:10.1016/j.ensm.2015.09.008 · Cited by 665
Self-citationRedox-Active Polymers for Energy Storage Nanoarchitectonics
Kim, J., Kim, J. H., & Ariga, K. (2017) · Joule · doi:10.1016/j.joule.2017.08.018 · Cited by 549
Multi‐Functional Layered WS2 Nanosheets for Enhancing the Performance of Lithium–Sulfur Batteries
Lei, T., Chen, W., Huang, J., Yan, C., Sun, H., Wang, C., Zhang, W., Li, Y., & Xiong, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601843 · Cited by 548
Self-citationYe, H., Xin, S., Yin, Y.-X., Li, J.-Y., Guo, Y.-G., & Wan, L.-J. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b01763 · Cited by 451
Chen, R., Zhao, T., Lu, J., Wu, F., Li, L., Chen, J., Tan, G., Ye, Y., & Amine, K. (2013) · Nano Letters · doi:10.1021/nl4016683 · Cited by 401
Chen, W., Qian, T., Xiong, J., Xu, N., Liu, X., Liu, J., Zhou, J., Shen, X., Yang, T., Chen, Y., et al. (2017) · Advanced Materials · doi:10.1002/adma.201605160 · Cited by 382
Self-citationChen, J.-J., Yuan, R.-M., Feng, J.-M., Zhang, Q., Huang, J.-X., Fu, G., Zheng, M.-S., Ren, B., & Dong, Q.-F. (2015) · Chemistry of Materials · doi:10.1021/cm5044667 · Cited by 372
Self-citationIn Situ Raman Spectroscopy of Sulfur Speciation in Lithium–Sulfur Batteries
Wu, H.-L., Huff, L. A., & Gewirth, A. A. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am5072942 · Cited by 338
Revisiting the chemistry of graphite oxides and its effect on ammonia adsorption
Petit, C., Seredych, M., & Bandosz, T. J. (2009) · Journal of Materials Chemistry · doi:10.1039/b916672f · Cited by 269
Properties of sodium lignosulfonate as dispersant of coal water slurry
Yang, D., Qiu, X., Zhou, M., & Lou, H. (2007) · Energy Conversion and Management · doi:10.1016/j.enconman.2007.04.007 · Cited by 228
Analysis of Polysulfide Dissolved in Electrolyte in Discharge-Charge Process of Li-S Battery
Diao, Y., Xie, K., Xiong, S., & Hong, X. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.060204jes · Cited by 178
Interface Chemistry Guided Long-Cycle-Life Li–S Battery
Wang, L., Dong, W., Zhang, F., & Jin, J. (2013) · Nano Letters · doi:10.1021/nl4018868 · Cited by 126
Scalable Surface Area Characterization by Electrokinetic Analysis of Complex Anion Adsorption
Hanaor, D. A. H., Ghadiri, M., Chrzanowski, W., & Gan, Y. (2014) · Langmuir · doi:10.1021/la503581e · Cited by 125
Covalent Bond Glued Sulfur Nanosheet-Based Cathode Integration for Long-Cycle-Life Li–S Batteries
Wang, L., Dong, Z., Dong, W., Zhang, F., & Jin, J. (2013) · Nano Letters · doi:10.1021/nl403715h · Cited by 110
Multifunctional Separator Coatings for High‐Performance Lithium–Sulfur Batteries
Kim, M. S., Ma, L., Choudhury, S., & Archer, L. A. (2016) · Advanced Materials Interfaces · doi:10.1002/admi.201600450 · Cited by 69
Cited by
A Perspective toward Practical Lithium–Sulfur Batteries
Zhao, M., Li, B.-Q., Zhang, X.-Q., Huang, J.-Q., & Zhang, Q. (2020) · ACS Central Science · doi:10.1021/acscentsci.0c00449 · Cited by 858
Self-citationHigh-safety separators for lithium-ion batteries and sodium-ion batteries: advances and perspective
Zhang, L., Li, X., Yang, M., & Chen, W. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2021.06.033 · Cited by 587
Self-citationEstablishing reaction networks in the 16-electron sulfur reduction reaction
Liu, R., Wei, Z., Peng, L., Zhang, L., Zohar, A., Schoeppner, R., Wang, P., Wan, C., Zhu, D., Liu, H., et al. (2024) · Nature · doi:10.1038/s41586-023-06918-4 · Cited by 573
Self-citationHuang, Y., Lin, L., Zhang, C., Liu, L., Li, Y., Qiao, Z., Lin, J., Wei, Q., Wang, L., Xie, Q., et al. (2022) · Advanced Science · doi:10.1002/advs.202106004 · Cited by 463
Self-citationEmerging Catalysts to Promote Kinetics of Lithium–Sulfur Batteries
Wang, P., Xi, B., Huang, M., Chen, W., Feng, J., & Xiong, S. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202002893 · Cited by 451
Self-citation
Metadata
- Authors
- Lei, T., Chen, W., Lv, W., Huang, J., Zhu, J., Chu, J., Yan, C., Wu, C., Yan, Y., He, W., Xiong, J., Li, Y., Yan, C., Goodenough, J. B., & Duan, X.
- Venue
- Joule
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 2
- Issue
- 10
- Pages
- 2091-2104
- ISSN
- 2542-4351 (ISSN-L)
- OpenAlex
- W2886386473
- Cited by
- 493
- References
- 25
- FWCI
- 18.91
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.