Bimolecular Additives Improve Wide-Band-Gap Perovskites for Efficient Tandem Solar Cells with CIGS
Open accessThe DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
Abstract
Summary Tandem solar cells coupling narrow- and wide-band-gap thin-film polycrystalline absorbers are attractive for achieving ultrahigh efficiency with low manufacturing cost. For established narrow-band-gap CIGS thin-film bottom cells, a challenge is to develop highly efficient polycrystalline wide-band-gap top cells. Here, we demonstrate a 1.68-eV (FA0.65MA0.20Cs0.15)Pb(I0.8Br0.2)3 wide-band-gap perovskite solar cell with an efficiency of ∼20% enabled by using PEAI and Pb(SCN)2 complementary additives in the perovskite precursor. The coupling of PEA+ and SCN− provides a synergistic effect that overcomes growth challenges with either additive individually and improves perovskite film quality with enhanced crystallinity, reduced formation of excess PbI2 (in comparison to using Pb(SCN)2 additive alone), lower defect density and energetic disorder, and an improved carrier mobility (∼47 cm2 V−1s−1) and lifetime (∼2.9 μs). When coupling a semi-transparent 1.68-eV perovskite top cell fabricated by this approach with a 1.12-eV CIGS bottom cell, we achieve 25.9%-efficient polycrystalline perovskite/CIGS 4-terminal thin-film tandem solar cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Detailed Balance Limit of Efficiency of p-n Junction Solar Cells
Shockley, W., & Queisser, H. J. (1961) · Journal of Applied Physics · doi:10.1063/1.1736034 · Cited by 13,258
Noh, J. H., Im, S. H., Heo, J. H., Mandal, T. N., & Seok, S. I. (2013) · Nano Letters · doi:10.1021/nl400349b · Cited by 4,829
High-efficiency two-dimensional Ruddlesden–Popper perovskite solar cells
Tsai, H., Nie, W., Blancon, J.-C., Stoumpos, C. C., Asadpour, R., Harutyunyan, B., Neukirch, A. J., Verduzco, R., Crochet, J. J., Tretiak, S., et al. (2016) · Nature · doi:10.1038/nature18306 · Cited by 3,384
A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells
McMeekin, D. P., Sadoughi, G., Rehman, W., Eperon, G. E., Saliba, M., Hörantner, M. T., Haghighirad, A., Sakai, N., Korte, L., Rech, B., et al. (2016) · Science · doi:10.1126/science.aad5845 · Cited by 3,067
Unusual defect physics in CH3NH3PbI3 perovskite solar cell absorber
Yin, W.-J., Shi, T., & Yan, Y. (2014) · Applied Physics Letters · doi:10.1063/1.4864778 · Cited by 2,707
Self-citationReversible photo-induced trap formation in mixed-halide hybrid perovskites for photovoltaics
Hoke, E. T., Slotcavage, D. J., Dohner, E. R., Bowring, A. R., Karunadasa, H. I., & McGehee, M. D. (2015) · Chemical Science · doi:10.1039/c4sc03141e · Cited by 2,295
2D Homologous Perovskites as Light-Absorbing Materials for Solar Cell Applications
Cao, D. H., Stoumpos, C. C., Farha, O. K., Hupp, J. T., & Kanatzidis, M. G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b03796 · Cited by 2,158
Ruddlesden–Popper Hybrid Lead Iodide Perovskite 2D Homologous Semiconductors
Stoumpos, C. C., Cao, D. H., Clark, D. J., Young, J., Rondinelli, J. M., Jang, J. I., Hupp, J. T., & Kanatzidis, M. G. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00847 · Cited by 2,130
One-Year stable perovskite solar cells by 2D/3D interface engineering
Grancini, G., Roldán-Carmona, C., Zimmermann, I., Mosconi, E., Lee, X., Martineau, D., Narbey, S., Oswald, F., De Angelis, F., Graetzel, M., et al. (2017) · Nature Communications · doi:10.1038/ncomms15684 · Cited by 2,068
Maximizing and stabilizing luminescence from halide perovskites with potassium passivation
Abdi-Jalebi, M., Andaji-Garmaroudi, Z., Cacovich, S., Stavrakas, C., Philippe, B., Richter, J. M., Alsari, M., Booker, E. P., Hutter, E. M., Pearson, A. J., et al. (2018) · Nature · doi:10.1038/nature25989 · Cited by 1,734
Cited by
Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells
Jeong, J., Kim, M., Seo, J., Lu, H., Ahlawat, P., Mishra, A., Yang, Y., Hope, M. A., Eickemeyer, F. T., Kim, M., et al. (2021) · Nature · doi:10.1038/s41586-021-03406-5 · Cited by 3,072
Self-citationHigh-Efficiency Perovskite Solar Cells
Kim, J. Y., Lee, J.-W., Jung, H. S., Shin, H., & Park, N.-G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00107 · Cited by 2,800
Triple-halide wide–band gap perovskites with suppressed phase segregation for efficient tandems
Xu, J., Boyd, C. C., Yu, Z. J., Palmstrom, A. F., Witter, D. J., Larson, B. W., France, R. M., Werner, J., Harvey, S. P., Wolf, E. J., et al. (2020) · Science · doi:10.1126/science.aaz5074 · Cited by 1,080
Self-citationScalable fabrication and coating methods for perovskite solar cells and solar modules
Park, N.-G., & Zhu, K. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0176-2 · Cited by 908
Self-citationAdditive Engineering for Efficient and Stable Perovskite Solar Cells
Zhang, F., & Zhu, K. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902579 · Cited by 805
Self-citationBimolecularly passivated interface enables efficient and stable inverted perovskite solar cells
Liu, C., Yang, Y., Chen, H., Xu, J., Liu, A., Bati, A. S. R., Zhu, H., Grater, L., Hadke, S. S., Huang, C., et al. (2023) · Science · doi:10.1126/science.adk1633 · Cited by 757
Understanding of perovskite crystal growth and film formation in scalable deposition processes
Liu, C., Cheng, Y.-B., & Ge, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00711c · Cited by 675
Advances in two-dimensional organic–inorganic hybrid perovskites
Zhang, F., Lu, H., Tong, J., Berry, J. J., Beard, M. C., & Zhu, K. (2020) · Energy & Environmental Science · doi:10.1039/c9ee03757h · Cited by 627
Self-citationEfficient, stable silicon tandem cells enabled by anion-engineered wide-bandgap perovskites
Kim, D., Jung, H. J., Park, I. J., Larson, B. W., Dunfield, S. P., Xiao, C., Kim, J., Tong, J., Boonmongkolras, P., Ji, S. G., et al. (2020) · Science · doi:10.1126/science.aba3433 · Cited by 611
Self-citationPerovskite Tandem Solar Cells: From Fundamentals to Commercial Deployment
Li, H., & Zhang, W. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00780 · Cited by 524
Next-generation applications for integrated perovskite solar cells
Bati, A. S. R., Zhong, Y. L., Burn, P. L., Nazeeruddin, M. K., Shaw, P. E., & Batmunkh, M. (2023) · Communications Materials · doi:10.1038/s43246-022-00325-4 · Cited by 492
Chen, B., Yu, Z. J., Manzoor, S., Wang, S., Weigand, W., Yu, Z., Yang, G., Ni, Z., Dai, X., Holman, Z. C., et al. (2020) · Joule · doi:10.1016/j.joule.2020.01.008 · Cited by 449
The 2020 photovoltaic technologies roadmap
Wilson, G. M., Al-Jassim, M., Metzger, W. K., Glunz, S. W., Verlinden, P., Xiong, G., Mansfield, L. M., Stanbery, B. J., Zhu, K., Yan, Y., et al. (2020) · Journal of Physics D: Applied Physics · doi:10.1088/1361-6463/ab9c6a · Cited by 437
Self-citationCompositional texture engineering for highly stable wide-bandgap perovskite solar cells
Jiang, Q., Tong, J., Scheidt, R. A., Wang, X., Louks, A. E., Xian, Y., Tirawat, R., Palmstrom, A. F., Hautzinger, M. P., Harvey, S. P., et al. (2022) · Science · doi:10.1126/science.adf0194 · Cited by 425
Self-citationRapid advances enabling high-performance inverted perovskite solar cells
Jiang, Q., & Zhu, K. (2024) · Nature Reviews Materials · doi:10.1038/s41578-024-00678-x · Cited by 410
Self-citationProspects for metal halide perovskite-based tandem solar cells
Wang, R., Huang, T., Xue, J., Tong, J., Zhu, K., & Yang, Y. (2021) · Nature Photonics · doi:10.1038/s41566-021-00809-8 · Cited by 409
Self-citationYe, J., Byranvand, M. M., Martínez, C. O., Hoye, R. L. Z., Saliba, M., & Polavarapu, L. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202102360 · Cited by 389
Wu, S., Zhang, J., Li, Z., Liu, D., Qin, M., Cheung, S. H., Lu, X., Lei, D., So, S. K., Zhu, Z., et al. (2020) · Joule · doi:10.1016/j.joule.2020.04.001 · Cited by 388
Self-citationPerovskite/CIGS Tandem Solar Cells: From Certified 24.2% toward 30% and Beyond
Jošt, M., Köhnen, E., Al-Ashouri, A., Bertram, T., Tomšič, Š., Magomedov, A., Kasparavicius, E., Kodalle, T., Lipovšek, B., Getautis, V., et al. (2022) · ACS Energy Letters · doi:10.1021/acsenergylett.2c00274 · Cited by 376
Fang, Z., Chen, W., Shi, Y., Zhao, J., Chu, S., Zhang, J., & Xiao, Z. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909754 · Cited by 299
High-Efficiency Silicon Heterojunction Solar Cells: Materials, Devices and Applications
Liu, Y., Li, Y., Wu, Y., Yang, G., Mazzarella, L., Procel-Moya, P., Tamboli, A. C., Weber, K., Boccard, M., Isabella, O., et al. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100579 · Cited by 293
Gharibzadeh, S., Fassl, P., Hossain, I. M., Rohrbeck, P., Frericks, M., Schmidt, M., Duong, T., Khan, M. R., Abzieher, T., Nejand, B. A., et al. (2021) · Energy & Environmental Science · doi:10.1039/d1ee01508g · Cited by 289
Defect activity in metal halide perovskites with wide and narrow bandgap
Zhou, Y., Poli, I., Meggiolaro, D., De Angelis, F., & Petrozza, A. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00331-x · Cited by 275
Synergy of 3D and 2D Perovskites for Durable, Efficient Solar Cells and Beyond
Metcalf, I., Sidhik, S., Zhang, H., Agrawal, A., Persaud, J., Hou, J., Even, J., & Mohite, A. D. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00214 · Cited by 249
Wu, X., Li, B., Zhu, Z., Chueh, C.-C., & Jen, A. K.-Y. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00841b · Cited by 229
Wide-Bandgap Metal Halide Perovskites for Tandem Solar Cells
Tong, J., Jiang, Q., Zhang, F., Kang, S. B., Kim, D. H., & Zhu, K. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.0c02105 · Cited by 224
Self-citationWang, G., Zheng, J., Duan, W., Yang, J., Mahmud, M. A., Lian, Q., Tang, S., Liao, C., Bing, J., Yi, J., et al. (2023) · Joule · doi:10.1016/j.joule.2023.09.007 · Cited by 176
Self-citationFinding junction partners for CsPbI3 in a two-terminal tandem solar cell: A theoretical prospect
Meng, L., Wei, Z., Zuo, T., & Gao, P. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.104866 · Cited by 63
Metadata
- Authors
- Kim, D. H., Muzzillo, C. P., Tong, J., Palmstrom, A. F., Larson, B. W., Choi, C., Harvey, S. P., Glynn, S., Whitaker, J. B., Zhang, F., Li, Z., Lu, H., van Hest, M. F. A. M., Berry, J. J., Mansfield, L. M., Huang, Y., Yan, Y., & Zhu, K.
- Venue
- Joule
- Publisher
- Elsevier BV
- Published
- 2019-07
- Volume
- 3
- Issue
- 7
- Pages
- 1734-1745
- ISSN
- 2542-4351 (ISSN-L)
- OpenAlex
- W2947157577
- Cited by
- 342
- References
- 46
- FWCI
- 13.83
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.