The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
Bimolecular Additives Improve Wide-Band-Gap Perovskites for Efficient Tandem Solar Cells with CIGS
Open accessAbstract
Summary Tandem solar cells coupling narrow- and wide-band-gap thin-film polycrystalline absorbers are attractive for achieving ultrahigh efficiency with low manufacturing cost. For established narrow-band-gap CIGS thin-film bottom cells, a challenge is to develop highly efficient polycrystalline wide-band-gap top cells. Here, we demonstrate a 1.68-eV (FA0.65MA0.20Cs0.15)Pb(I0.8Br0.2)3 wide-band-gap perovskite solar cell with an efficiency of ∼20% enabled by using PEAI and Pb(SCN)2 complementary additives in the perovskite precursor. The coupling of PEA+ and SCN− provides a synergistic effect that overcomes growth challenges with either additive individually and improves perovskite film quality with enhanced crystallinity, reduced formation of excess PbI2 (in comparison to using Pb(SCN)2 additive alone), lower defect density and energetic disorder, and an improved carrier mobility (∼47 cm2 V−1s−1) and lifetime (∼2.9 μs). When coupling a semi-transparent 1.68-eV perovskite top cell fabricated by this approach with a 1.12-eV CIGS bottom cell, we achieve 25.9%-efficient polycrystalline perovskite/CIGS 4-terminal thin-film tandem solar cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Detailed Balance Limit of Efficiency of p-n Junction Solar Cells
Shockley, W., & Queisser, H. J. (1961) · Journal of Applied Physics · doi:10.1063/1.1736034 · Cited by 13,258
Noh, J. H., Im, S. H., Heo, J. H., Mandal, T. N., & Seok, S. I. (2013) · Nano Letters · doi:10.1021/nl400349b · Cited by 4,829
High-efficiency two-dimensional Ruddlesden–Popper perovskite solar cells
Tsai, H., Nie, W., Blancon, J.-C., Stoumpos, C. C., Asadpour, R., Harutyunyan, B., Neukirch, A. J., Verduzco, R., Crochet, J. J., Tretiak, S., et al. (2016) · Nature · doi:10.1038/nature18306 · Cited by 3,384
A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells
McMeekin, D. P., Sadoughi, G., Rehman, W., Eperon, G. E., Saliba, M., Hörantner, M. T., Haghighirad, A., Sakai, N., Korte, L., Rech, B., et al. (2016) · Science · doi:10.1126/science.aad5845 · Cited by 3,067
Unusual defect physics in CH3NH3PbI3 perovskite solar cell absorber
Yin, W.-J., Shi, T., & Yan, Y. (2014) · Applied Physics Letters · doi:10.1063/1.4864778 · Cited by 2,707
Self-citationReversible photo-induced trap formation in mixed-halide hybrid perovskites for photovoltaics
Hoke, E. T., Slotcavage, D. J., Dohner, E. R., Bowring, A. R., Karunadasa, H. I., & McGehee, M. D. (2015) · Chemical Science · doi:10.1039/c4sc03141e · Cited by 2,295
2D Homologous Perovskites as Light-Absorbing Materials for Solar Cell Applications
Cao, D. H., Stoumpos, C. C., Farha, O. K., Hupp, J. T., & Kanatzidis, M. G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b03796 · Cited by 2,158
Ruddlesden–Popper Hybrid Lead Iodide Perovskite 2D Homologous Semiconductors
Stoumpos, C. C., Cao, D. H., Clark, D. J., Young, J., Rondinelli, J. M., Jang, J. I., Hupp, J. T., & Kanatzidis, M. G. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00847 · Cited by 2,130
One-Year stable perovskite solar cells by 2D/3D interface engineering
Grancini, G., Roldán-Carmona, C., Zimmermann, I., Mosconi, E., Lee, X., Martineau, D., Narbey, S., Oswald, F., De Angelis, F., Graetzel, M., et al. (2017) · Nature Communications · doi:10.1038/ncomms15684 · Cited by 2,068
Maximizing and stabilizing luminescence from halide perovskites with potassium passivation
Abdi-Jalebi, M., Andaji-Garmaroudi, Z., Cacovich, S., Stavrakas, C., Philippe, B., Richter, J. M., Alsari, M., Booker, E. P., Hutter, E. M., Pearson, A. J., et al. (2018) · Nature · doi:10.1038/nature25989 · Cited by 1,734
Noel, N. K., Abate, A., Stranks, S. D., Parrott, E. S., Burlakov, V. M., Goriely, A., & Snaith, H. J. (2014) · ACS Nano · doi:10.1021/nn5036476 · Cited by 1,709
23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability
Bush, K. A., Palmstrom, A. F., Yu, Z. J., Boccard, M., Cheacharoen, R., Mailoa, J. P., McMeekin, D. P., Hoye, R. L. Z., Bailie, C. D., Leijtens, T., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.9 · Cited by 1,545
Self-citationChen, Q., Zhou, H., Song, T.-B., Luo, S., Hong, Z., Duan, H.-S., Dou, L., Liu, Y., & Yang, Y. (2014) · Nano Letters · doi:10.1021/nl501838y · Cited by 1,543
Perovskite-perovskite tandem photovoltaics with optimized band gaps
Eperon, G. E., Leijtens, T., Bush, K. A., Prasanna, R., Green, T., Wang, J. T.-W., McMeekin, D. P., Volonakis, G., Milot, R. L., May, R., et al. (2016) · Science · doi:10.1126/science.aaf9717 · Cited by 1,499
Self-citationLigand-Stabilized Reduced-Dimensionality Perovskites
Quan, L. N., Yuan, M., Comin, R., Voznyy, O., Beauregard, E. M., Hoogland, S., Buin, A., Kirmani, A. R., Zhao, K., Amassian, A., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b11740 · Cited by 1,436
Self-citationWang, Z., Lin, Q., Chmiel, F. P., Sakai, N., Herz, L. M., & Snaith, H. J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.135 · Cited by 1,409
Sahli, F., Werner, J., Kamino, B. A., Bräuninger, M., Monnard, R., Paviet-Salomon, B., Barraud, L., Ding, L., Diaz Leon, J. J., Sacchetto, D., et al. (2018) · Nature Materials · doi:10.1038/s41563-018-0115-4 · Cited by 1,380
Opportunities and challenges for tandem solar cells using metal halide perovskite semiconductors
Leijtens, T., Bush, K. A., Prasanna, R., & McGehee, M. D. (2018) · Nature Energy · doi:10.1038/s41560-018-0190-4 · Cited by 1,121
Lewis Acid–Base Adduct Approach for High Efficiency Perovskite Solar Cells
Lee, J.-W., Kim, H.-S., & Park, N.-G. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00440 · Cited by 1,067
Universal Approach toward Hysteresis-Free Perovskite Solar Cell via Defect Engineering
Son, D.-Y., Kim, S.-G., Seo, J.-Y., Lee, S.-H., Shin, H., Lee, D., & Park, N.-G. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.7b10430 · Cited by 891
Essentially Trap-Free CsPbBr3 Colloidal Nanocrystals by Postsynthetic Thiocyanate Surface Treatment
Koscher, B. A., Swabeck, J. K., Bronstein, N. D., & Alivisatos, A. P. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b02817 · Cited by 844
Zhao, D., Yu, Y., Wang, C., Liao, W., Shrestha, N., Grice, C. R., Cimaroli, A. J., Guan, L., Ellingson, R. J., Zhu, K., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.18 · Cited by 776
Self-citation2D perovskite stabilized phase-pure formamidinium perovskite solar cells
Lee, J.-W., Dai, Z., Han, T.-H., Choi, C., Chang, S.-Y., Lee, S.-J., De Marco, N., Zhao, H., Sun, P., Huang, Y., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-05454-4 · Cited by 746
Self-citationSemi-transparent perovskite solar cells for tandems with silicon and CIGS
Bailie, C. D., Christoforo, M. G., Mailoa, J. P., Bowring, A. R., Unger, E. L., Nguyen, W. H., Burschka, J., Pellet, N., Lee, J. Z., Grätzel, M., et al. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03322a · Cited by 741
Solar cell efficiency tables (version 52)
Green, M. A., Hishikawa, Y., Dunlop, E. D., Levi, D. H., Hohl‐Ebinger, J., & Ho‐Baillie, A. W. Y. (2018) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.3040 · Cited by 710
Ke, W., Xiao, C., Wang, C., Saparov, B., Duan, H., Zhao, D., Xiao, Z., Schulz, P., Harvey, S. P., Liao, W., et al. (2016) · Advanced Materials · doi:10.1002/adma.201600594 · Cited by 579
Self-citationBush, K. A., Frohna, K., Prasanna, R., Beal, R. E., Leijtens, T., Swifter, S. A., & McGehee, M. D. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.7b01255 · Cited by 480
Beneficial Effects of PbI2 Incorporated in Organo‐Lead Halide Perovskite Solar Cells
Kim, Y. C., Jeon, N. J., Noh, J. H., Yang, W. S., Seo, J., Yun, J. S., Ho‐Baillie, A., Huang, S., Green, M. A., Seidel, J., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502104 · Cited by 462
High-performance perovskite/Cu(In,Ga)Se 2 monolithic tandem solar cells
Han, Q., Hsieh, Y.-T., Meng, L., Wu, J.-L., Sun, P., Yao, E.-P., Chang, S.-Y., Bae, S.-H., Kato, T., Bermudez, V., et al. (2018) · Science · doi:10.1126/science.aat5055 · Cited by 451
Tracking Iodide and Bromide Ion Segregation in Mixed Halide Lead Perovskites during Photoirradiation
Yoon, S. J., Draguta, S., Manser, J. S., Sharia, O., Schneider, W. F., Kuno, M., & Kamat, P. V. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00158 · Cited by 419
Selecting tandem partners for silicon solar cells
Yu, Z. J., Leilaeioun, M. A., & Holman, Z. C. (2016) · Nature Energy · doi:10.1038/nenergy.2016.137 · Cited by 325
High-efficiency inverted semi-transparent planar perovskite solar cells in substrate configuration
Fu, F., Feurer, T., Weiss, T. P., Pisoni, S., Avancini, E., Andres, C., Buecheler, S., & Tiwari, A. N. (2016) · Nature Energy · doi:10.1038/nenergy.2016.190 · Cited by 314
Monolithic Perovskite‐CIGS Tandem Solar Cells via In Situ Band Gap Engineering
Todorov, T. K., Gershon, T., Gunawan, O., Lee, Y. S., Sturdevant, C., Chang, L., & Guha, S. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500799 · Cited by 280
Shen, H., Duong, T., Peng, J., Jacobs, D., Wu, N., Gong, J., Wu, Y., Karuturi, S. K., Fu, X., Weber, K., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02627g · Cited by 257
Yu, Y., Wang, C., Grice, C. R., Shrestha, N., Zhao, D., Liao, W., Guan, L., Awni, R. A., Meng, W., Cimaroli, A. J., et al. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00278 · Cited by 245
Self-citationZhao, Y., & Zhu, K. (2014) · Journal of the American Chemical Society · doi:10.1021/ja5071398 · Cited by 242
Self-citationStabilized Wide Bandgap Perovskite Solar Cells by Tin Substitution
Yang, Z., Rajagopal, A., Jo, S. B., Chueh, C.-C., Williams, S., Huang, C.-C., Katahara, J. K., Hillhouse, H. W., & Jen, A. K.-Y. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b03857 · Cited by 242
Matching Charge Extraction Contact for Wide‐Bandgap Perovskite Solar Cells
Lin, Y., Chen, B., Zhao, F., Zheng, X., Deng, Y., Shao, Y., Fang, Y., Bai, Y., Wang, C., & Huang, J. (2017) · Advanced Materials · doi:10.1002/adma.201700607 · Cited by 239
Low‐Temperature Fabrication of Efficient Wide‐Bandgap Organolead Trihalide Perovskite Solar Cells
Bi, C., Yuan, Y., Fang, Y., & Huang, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401616 · Cited by 164
Synthesis, Single‐Crystal Structure and Characterization of (CH3NH3)2Pb(SCN)2I2
Daub, M., & Hillebrecht, H. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201506449 · Cited by 149
Kim, D. H., Park, J., Li, Z., Yang, M., Park, J., Park, I. J., Kim, J. Y., Berry, J. J., Rumbles, G., & Zhu, K. (2017) · Advanced Materials · doi:10.1002/adma.201606831 · Cited by 149
Self-citationEnhancing Defect Tolerance and Phase Stability of High-Bandgap Perovskites via Guanidinium Alloying
Stoddard, R. J., Rajagopal, A., Palmer, R. L., Braly, I. L., Jen, A. K. ‐., & Hillhouse, H. W. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00576 · Cited by 136
Pascoe, A. R., Yang, M., Kopidakis, N., Zhu, K., Reese, M. O., Rumbles, G., Fekete, M., Duffy, N. W., & Cheng, Y. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.02.031 · Cited by 88
Self-citationHybrid Perovskites: Effective Crystal Growth for Optoelectronic Applications
Jeon, T., Kim, S. J., Yoon, J., Byun, J., Hong, H. R., Lee, T., Kim, J., Shin, B., & Kim, S. O. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602596 · Cited by 86
Perovskite Photovoltaics: The Path to a Printable Terawatt-Scale Technology
Berry, J. J., van de Lagemaat, J., Al-Jassim, M. M., Kurtz, S., Yan, Y., & Zhu, K. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00964 · Cited by 76
Self-citationScalable perovskite/CIGS thin-film solar module with power conversion efficiency of 17.8%
Paetzold, U. W., Jaysankar, M., Gehlhaar, R., Ahlswede, E., Paetel, S., Qiu, W., Bastos, J., Rakocevic, L., Richards, B. S., Aernouts, T., et al. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01651d · Cited by 61
Cited by
Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells
Jeong, J., Kim, M., Seo, J., Lu, H., Ahlawat, P., Mishra, A., Yang, Y., Hope, M. A., Eickemeyer, F. T., Kim, M., et al. (2021) · Nature · doi:10.1038/s41586-021-03406-5 · Cited by 3,072
Self-citationHigh-Efficiency Perovskite Solar Cells
Kim, J. Y., Lee, J.-W., Jung, H. S., Shin, H., & Park, N.-G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00107 · Cited by 2,800
Triple-halide wide–band gap perovskites with suppressed phase segregation for efficient tandems
Xu, J., Boyd, C. C., Yu, Z. J., Palmstrom, A. F., Witter, D. J., Larson, B. W., France, R. M., Werner, J., Harvey, S. P., Wolf, E. J., et al. (2020) · Science · doi:10.1126/science.aaz5074 · Cited by 1,080
Self-citationScalable fabrication and coating methods for perovskite solar cells and solar modules
Park, N.-G., & Zhu, K. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0176-2 · Cited by 908
Self-citationAdditive Engineering for Efficient and Stable Perovskite Solar Cells
Zhang, F., & Zhu, K. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902579 · Cited by 805
Self-citation
Metadata
- Authors
- Kim, D. H., Muzzillo, C. P., Tong, J., Palmstrom, A. F., Larson, B. W., Choi, C., Harvey, S. P., Glynn, S., Whitaker, J. B., Zhang, F., Li, Z., Lu, H., van Hest, M. F. A. M., Berry, J. J., Mansfield, L. M., Huang, Y., Yan, Y., & Zhu, K.
- Venue
- Joule
- Publisher
- Elsevier BV
- Published
- 2019-07
- Volume
- 3
- Issue
- 7
- Pages
- 1734-1745
- ISSN
- 2542-4351 (ISSN-L)
- OpenAlex
- W2947157577
- Cited by
- 342
- References
- 46
- FWCI
- 13.83
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.