The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Blade-Coated Perovskites on Textured Silicon for 26%-Efficient Monolithic Perovskite/Silicon Tandem Solar Cells
Open accessAbstract
Summary Integrating perovskites onto textured silicon provides a pathway to 30% tandem solar cells. However, deposition of 0.5–1 μm thick perovskite layers from solution onto textured silicon with typical pyramid heights of 3–10 μm remains a challenge. We propose a new tandem architecture that enables scalable, solution-based blading of perovskites onto silicon wafers textured with pyramids less than 1 μm in height. These pyramids are rough enough to scatter light within the silicon nearly as efficiently as large pyramids but smooth enough to solution-process a perovskite film. A nitrogen-assisted blading process deposits both a conformal hole transport layer and a planarizing perovskite layer that fully covers the textured silicon, at a speed of 1.5 m/min. With a textured light-scattering layer added to the top of the tandem to reduce front-surface reflectance, we achieve a perovskite/silicon tandem cell with an efficiency of 26% on textured silicon.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells
Yang, W. S., Park, B.-W., Jung, E. H., Jeon, N. J., Kim, Y. C., Lee, D. U., Shin, S. S., Seo, J., Kim, E. K., Noh, J. H., et al. (2017) · Science · doi:10.1126/science.aan2301 · Cited by 5,445
Surface passivation of perovskite film for efficient solar cells
Jiang, Q., Zhao, Y., Zhang, X., Yang, X., Chen, Y., Chu, Z., Ye, Q., Li, X., Yin, Z., & You, J. (2019) · Nature Photonics · doi:10.1038/s41566-019-0398-2 · Cited by 4,736
A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells
McMeekin, D. P., Sadoughi, G., Rehman, W., Eperon, G. E., Saliba, M., Hörantner, M. T., Haghighirad, A., Sakai, N., Korte, L., Rech, B., et al. (2016) · Science · doi:10.1126/science.aad5845 · Cited by 3,067
Zheng, X., Chen, B., Dai, J., Fang, Y., Bai, Y., Lin, Y., Wei, H., Zeng, X. C., & Huang, J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.102 · Cited by 2,154
Self-citationImperfections and their passivation in halide perovskite solar cells
Chen, B., Rudd, P. N., Yang, S., Yuan, Y., & Huang, J. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00853a · Cited by 1,959
Self-citationEfficient luminescent solar cells based on tailored mixed-cation perovskites
Bi, D., Tress, W., Dar, M. I., Gao, P., Luo, J., Renevier, C., Schenk, K., Abate, A., Giordano, F., Correa Baena, J.-P., et al. (2016) · Science Advances · doi:10.1126/sciadv.1501170 · Cited by 1,864
Kim, M., Kim, G.-H., Lee, T. K., Choi, I. W., Choi, H. W., Jo, Y., Yoon, Y. J., Kim, J. W., Lee, J., Huh, D., et al. (2019) · Joule · doi:10.1016/j.joule.2019.06.014 · Cited by 1,753
Maximizing and stabilizing luminescence from halide perovskites with potassium passivation
Abdi-Jalebi, M., Andaji-Garmaroudi, Z., Cacovich, S., Stavrakas, C., Philippe, B., Richter, J. M., Alsari, M., Booker, E. P., Hutter, E. M., Pearson, A. J., et al. (2018) · Nature · doi:10.1038/nature25989 · Cited by 1,734
Brenner, T. M., Egger, D. A., Kronik, L., Hodes, G., & Cahen, D. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2015.7 · Cited by 1,557
23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability
Bush, K. A., Palmstrom, A. F., Yu, Z. J., Boccard, M., Cheacharoen, R., Mailoa, J. P., McMeekin, D. P., Hoye, R. L. Z., Bailie, C. D., Leijtens, T., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.9 · Cited by 1,545
Self-citationSahli, F., Werner, J., Kamino, B. A., Bräuninger, M., Monnard, R., Paviet-Salomon, B., Barraud, L., Ding, L., Diaz Leon, J. J., Sacchetto, D., et al. (2018) · Nature Materials · doi:10.1038/s41563-018-0115-4 · Cited by 1,380
Scalable fabrication of perovskite solar cells
Li, Z., Klein, T. R., Kim, D. H., Yang, M., Berry, J. J., van Hest, M. F. A. M., & Zhu, K. (2018) · Nature Reviews Materials · doi:10.1038/natrevmats.2018.17 · Cited by 1,166
Opportunities and challenges for tandem solar cells using metal halide perovskite semiconductors
Leijtens, T., Bush, K. A., Prasanna, R., & McGehee, M. D. (2018) · Nature Energy · doi:10.1038/s41560-018-0190-4 · Cited by 1,121
Toward Large Scale Roll‐to‐Roll Production of Fully Printed Perovskite Solar Cells
Hwang, K., Jung, Y., Heo, Y., Scholes, F. H., Watkins, S. E., Subbiah, J., Jones, D. J., Kim, D., & Vak, D. (2015) · Advanced Materials · doi:10.1002/adma.201404598 · Cited by 930
Deng, Y., Zheng, X., Bai, Y., Wang, Q., Zhao, J., & Huang, J. (2018) · Nature Energy · doi:10.1038/s41560-018-0153-9 · Cited by 791
Self-citationA 2-terminal perovskite/silicon multijunction solar cell enabled by a silicon tunnel junction
Mailoa, J. P., Bailie, C. D., Johlin, E. C., Hoke, E. T., Akey, A. J., Nguyen, W. H., McGehee, M. D., & Buonassisi, T. (2015) · Applied Physics Letters · doi:10.1063/1.4914179 · Cited by 660
Monolithic perovskite/silicon-heterojunction tandem solar cells processed at low temperature
Albrecht, S., Saliba, M., Correa Baena, J. P., Lang, F., Kegelmann, L., Mews, M., Steier, L., Abate, A., Rappich, J., Korte, L., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02965a · Cited by 649
Deng, Y., Van Brackle, C. H., Dai, X., Zhao, J., Chen, B., & Huang, J. (2019) · Science Advances · doi:10.1126/sciadv.aax7537 · Cited by 535
Self-citationWu, W.-Q., Yang, Z., Rudd, P. N., Shao, Y., Dai, X., Wei, H., Zhao, J., Fang, Y., Wang, Q., Liu, Y., et al. (2019) · Science Advances · doi:10.1126/sciadv.aav8925 · Cited by 522
Self-citationBush, K. A., Frohna, K., Prasanna, R., Beal, R. E., Leijtens, T., Swifter, S. A., & McGehee, M. D. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.7b01255 · Cited by 480
Grain Engineering for Perovskite/Silicon Monolithic Tandem Solar Cells with Efficiency of 25.4%
Chen, B., Yu, Z. J., Liu, K., Zheng, X., Liu, Y., Shi, J., Spronk, D., Rudd, P. N., Holman, Z. C., & Huang, J. (2018) · Joule · doi:10.1016/j.joule.2018.10.003 · Cited by 439
Self-citationVapor-Deposited Perovskites: The Route to High-Performance Solar Cell Production?
Ávila, J., Momblona, C., Boix, P. P., Sessolo, M., & Bolink, H. J. (2017) · Joule · doi:10.1016/j.joule.2017.07.014 · Cited by 379
Jošt, M., Köhnen, E., Morales-Vilches, A. B., Lipovšek, B., Jäger, K., Macco, B., Al-Ashouri, A., Krč, J., Korte, L., Rech, B., et al. (2018) · Energy & Environmental Science · doi:10.1039/c8ee02469c · Cited by 379
Bimolecular Additives Improve Wide-Band-Gap Perovskites for Efficient Tandem Solar Cells with CIGS
Kim, D. H., Muzzillo, C. P., Tong, J., Palmstrom, A. F., Larson, B. W., Choi, C., Harvey, S. P., Glynn, S., Whitaker, J. B., Zhang, F., et al. (2019) · Joule · doi:10.1016/j.joule.2019.04.012 · Cited by 342
One-step roll-to-roll air processed high efficiency perovskite solar cells
Zuo, C., Vak, D., Angmo, D., Ding, L., & Gao, M. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.01.037 · Cited by 335
Selecting tandem partners for silicon solar cells
Yu, Z. J., Leilaeioun, M. A., & Holman, Z. C. (2016) · Nature Energy · doi:10.1038/nenergy.2016.137 · Cited by 325
Self-citationKöhnen, E., Jošt, M., Morales‐Vilches, A. B., Tockhorn, P., Al‐Ashouri, A., Macco, B., Kegelmann, L., Korte, L., Rech, B., Schlatmann, R., et al. (2019) · Sustainable Energy & Fuels · doi:10.1039/c9se00120d · Cited by 312
Mazzarella, L., Lin, Y., Kirner, S., Morales‐Vilches, A. B., Korte, L., Albrecht, S., Crossland, E., Stannowski, B., Case, C., Snaith, H. J., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803241 · Cited by 311
Wang, Q., Bi, C., & Huang, J. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.04.029 · Cited by 309
Self-citationChen, B., Bai, Y., Yu, Z., Li, T., Zheng, X., Dong, Q., Shen, L., Boccard, M., Gruverman, A., Holman, Z., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201601128 · Cited by 284
Self-citationHeo, J. H., Lee, M. H., Jang, M. H., & Im, S. H. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta06718b · Cited by 281
Bush, K. A., Manzoor, S., Frohna, K., Yu, Z. J., Raiford, J. A., Palmstrom, A. F., Wang, H.-P., Prasanna, R., Bent, S. F., Holman, Z. C., et al. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b01201 · Cited by 247
Self-citationVacuum Deposited Triple‐Cation Mixed‐Halide Perovskite Solar Cells
Gil‐Escrig, L., Momblona, C., La‐Placa, M., Boix, P. P., Sessolo, M., & Bolink, H. J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703506 · Cited by 182
Hsiao, S., Lin, H., Lee, W., Tsai, W., Chiang, K., Liao, W., Ren‐Wu, C., Chen, C., & Lin, H. (2016) · Advanced Materials · doi:10.1002/adma.201601505 · Cited by 180
Shen, H., Omelchenko, S. T., Jacobs, D. A., Yalamanchili, S., Wan, Y. Y., Yan, D., Phang, P., Duong, T., Wu, Y., Yin, Y., et al. (2018) · Science Advances · doi:10.1126/sciadv.aau9711 · Cited by 175
Manzoor, S., Haeusele, J., Bush, K. A., Palmstrom, A. F., Carpenter, J. V., Yu, Z. J., Bent, S. F., McGehee, M. D., & Holman, Z. C. (2018) · Optics Express · doi:10.1364/oe.26.027441 · Cited by 173
Self-citationProgress in Tandem Solar Cells Based on Hybrid Organic–Inorganic Perovskites
Chen, B., Zheng, X., Bai, Y., Padture, N. P., & Huang, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602400 · Cited by 171
Self-citationSpray‐Cast Multilayer Organometal Perovskite Solar Cells Fabricated in Air
Mohamad, D. K., Griffin, J., Bracher, C., Barrows, A. T., & Lidzey, D. G. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600994 · Cited by 160
High voltage vacuum-deposited CH 3 NH 3 PbI 3 –CH 3 NH 3 PbI 3 tandem solar cells
Ávila, J., Momblona, C., Boix, P. P., Sessolo, M., Anaya, M., Lozano, G., Vandewal, K., Míguez, H., & Bolink, H. J. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01936c · Cited by 130
2-Methoxyethanol as a new solvent for processing methylammonium lead halide perovskite solar cells
Hendriks, K. H., van Franeker, J. J., Bruijnaers, B. J., Anta, J. A., Wienk, M. M., & Janssen, R. A. J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta09125c · Cited by 129
Techno-economic viability of silicon-based tandem photovoltaic modules in the United States
Yu, Z. J., Carpenter, J. V., & Holman, Z. C. (2018) · Nature Energy · doi:10.1038/s41560-018-0201-5 · Cited by 124
Self-citationFully Vacuum-Processed Wide Band Gap Mixed-Halide Perovskite Solar Cells
Longo, G., Momblona, C., La‐Placa, M., Gil‐Escrig, L., Sessolo, M., & Bolink, H. J. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b01217 · Cited by 113
Yin, J., Qu, H. Y., Cao, J., Tai, H., Li, J., & Zheng, N. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta04465d · Cited by 101
Cited by
Monolithic perovskite/silicon tandem solar cell with >29% efficiency by enhanced hole extraction
Al-Ashouri, A., Köhnen, E., Li, B., Magomedov, A., Hempel, H., Caprioglio, P., Márquez, J. A., Morales Vilches, A. B., Kasparavicius, E., Smith, J. A., et al. (2020) · Science · doi:10.1126/science.abd4016 · Cited by 2,095
Interface passivation for 31.25%-efficient perovskite/silicon tandem solar cells
Chin, X. Y., Turkay, D., Steele, J. A., Tabean, S., Eswara, S., Mensi, M., Fiala, P., Wolff, C. M., Paracchino, A., Artuk, K., et al. (2023) · Science · doi:10.1126/science.adg0091 · Cited by 526
Perovskite Tandem Solar Cells: From Fundamentals to Commercial Deployment
Li, H., & Zhang, W. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00780 · Cited by 524
Next-generation applications for integrated perovskite solar cells
Bati, A. S. R., Zhong, Y. L., Burn, P. L., Nazeeruddin, M. K., Shaw, P. E., & Batmunkh, M. (2023) · Communications Materials · doi:10.1038/s43246-022-00325-4 · Cited by 492
Efficient and stable perovskite-silicon tandem solar cells through contact displacement by MgF x
Liu, J., De Bastiani, M., Aydin, E., Harrison, G. T., Gao, Y., Pradhan, R. R., Eswaran, M. K., Mandal, M., Yan, W., Seitkhan, A., et al. (2022) · Science · doi:10.1126/science.abn8910 · Cited by 460
Metadata
- Authors
- Chen, B., Yu, Z. J., Manzoor, S., Wang, S., Weigand, W., Yu, Z., Yang, G., Ni, Z., Dai, X., Holman, Z. C., & Huang, J.
- Venue
- Joule
- Publisher
- Elsevier BV
- Published
- 2020-04
- Volume
- 4
- Issue
- 4
- Pages
- 850-864
- ISSN
- 2542-4351 (ISSN-L)
- OpenAlex
- W3000914311
- Cited by
- 449
- References
- 44
- FWCI
- 23.71
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.