The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
In-plane and through-plane gas permeability of carbon fiber electrode backing layers
Open accessAbstract
The absolute gas permeability of several common gas diffusion layer (GDL) materials for polymer electrolyte membrane fuel cells was measured. Measurements were made in three perpendicular directions to investigate anisotropic properties. Most materials were found to display higher in-plane permeability than through-plane permeability. The permeability in the two perpendicular in-plane directions was found to display significant anisotropy. Materials with the most highly aligned fibers showed the highest anisotropy and the permeability could differ by as much as a factor of 2. In-plane permeability was also measured as the GDL was compressed to different thicknesses. Typically, compression of a sample to half its initial thickness resulted in a decrease in permeability by an order of magnitude. Since the change in GDL thickness during compression can be converted to porosity, the relationship between measured permeability and porosity was compared to various models available in the literature, one of which allows the estimation of anisotropic tortuosity. The effect of inertia on fluid flow was also determined and found to vary inversely with permeability, in agreement with available correlations. The results of this work will be useful for 3D modeling studies where knowledge of permeability and effective diffusivity tensors is required.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Porous Media: Fluid Transport and Pore Structure
Dullien, F. A. L. (1979) · Cited by 4,038
Handbook of fuel cells: fundamentals, technology, and applications
(2003) · Focus on Catalysts · doi:10.1016/s1351-4180(03)00850-x · Cited by 3,324
Porous Media: Fluid Transport and Pore Structure
Mason, G. (1981) · The Chemical Engineering Journal · doi:10.1016/0300-9467(81)80049-4 · Cited by 2,070
Nam, J. H., & Kaviany, M. (2003) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(03)00305-3 · Cited by 988
Modeling Transport in Polymer-Electrolyte Fuel Cells
Weber, A. Z., & Newman, J. (2004) · Chemical Reviews · doi:10.1021/cr020729l · Cited by 738
Two-phase transport and the role of micro-porous layer in polymer electrolyte fuel cells
Pasaogullari, U., & Wang, C.-Y. (2004) · Electrochimica Acta · doi:10.1016/j.electacta.2004.04.027 · Cited by 518
van Brakel, J., & Heertjes, P. M. (1974) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(74)90190-2 · Cited by 465
Tomadakis, M. M., & Robertson, T. J. (2004) · Journal of Composite Materials · doi:10.1177/0021998305046438 · Cited by 463
Estimating the Coefficient of Inertial Resistance in Fluid Flow Through Porous Media
Geertsma, J. (1974) · Society of Petroleum Engineers Journal · doi:10.2118/4706-pa · Cited by 442
The effects of compression and gas diffusion layers on the performance of a PEM fuel cell
Lee, W.-K., Ho, C.-H., Van Zee, J. W., & Murthy, M. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(99)00298-0 · Cited by 369
Cited by
Redox flow batteries: a review
Weber, A. Z., Mench, M. M., Meyers, J. P., Ross, P. N., Gostick, J. T., & Liu, Q. (2011) · Journal of Applied Electrochemistry · doi:10.1007/s10800-011-0348-2 · Cited by 2,008
Self-citationWater transport in polymer electrolyte membrane fuel cells
Jiao, K., & Li, X. (2011) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2010.06.002 · Cited by 1,086
Turning the Page: Advancing Paper-Based Microfluidics for Broad Diagnostic Application
Gong, M. M., & Sinton, D. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00024 · Cited by 573
Gas diffusion layer for proton exchange membrane fuel cells—A review
Cindrella, L., Kannan, A. M., Lin, J. F., Saminathan, K., Ho, Y., Lin, C. W., & Wertz, J. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.04.005 · Cited by 557
Electrode for proton exchange membrane fuel cells: A review
Majlan, E. H., Rohendi, D., Daud, W. R. W., Husaini, T., & Haque, M. A. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.03.007 · Cited by 438
Versatile and efficient pore network extraction method using marker-based watershed segmentation
Gostick, J. T. (2017) · Physical Review E · doi:10.1103/physreve.96.023307 · Cited by 423
Self-citationOzden, A., Shahgaldi, S., Li, X., & Hamdullahpur, F. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.05.002 · Cited by 385
Rechargeable redox flow batteries: flow fields, stacks and design considerations
Ke, X., Prahl, J. M., Alexander, J. I. D., Wainright, J. S., Zawodzinski, T. A., & Savinell, R. F. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00072g · Cited by 326
Sinha, P. K., & Wang, C.-Y. (2007) · Electrochimica Acta · doi:10.1016/j.electacta.2007.06.061 · Cited by 290
Microporous layer for water morphology control in PEMFC
Nam, J. H., Lee, K.-J., Hwang, G.-S., Kim, C.-J., & Kaviany, M. (2009) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2009.01.002 · Cited by 271
Gas-diffusion-layer structural properties under compression via X-ray tomography
Zenyuk, I. V., Parkinson, D. Y., Connolly, L. G., & Weber, A. Z. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.08.020 · Cited by 269
Ye, Q., & Nguyen, T. V. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2783775 · Cited by 264
Breathable and Wearable Energy Storage Based on Highly Flexible Paper Electrodes
Dong, L., Xu, C., Li, Y., Pan, Z., Liang, G., Zhou, E., Kang, F., & Yang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201602541 · Cited by 257
Impact of GDL structure and wettability on water management in polymer electrolyte fuel cells
Sinha, P. K., Mukherjee, P. P., & Wang, C.-Y. (2007) · Journal of Materials Chemistry · doi:10.1039/b703485g · Cited by 252
Zamel, N., & Li, X. (2013) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2012.07.002 · Cited by 217
A technical review on gas diffusion, mechanism and medium of PEM fuel cell
Jayakumar, A., Sethu, S. P., Ramos, M., Robertson, J., & Al-Jumaily, A. (2015) · Ionics · doi:10.1007/s11581-014-1322-x · Cited by 148
Hasanpour, S., Rashidi, A., Walsh, T., Pagan, E., Milani, A. S., Akbari, M., & Djilali, N. (2021) · ACS Omega · doi:10.1021/acsomega.0c06309 · Cited by 17
Metadata
- Authors
- Gostick, J. T., Fowler, M. W., Pritzker, M. D., Ioannidis, M. A., & Behra, L. M.
- Venue
- Journal of Power Sources
- Publisher
- Elsevier BV
- Published
- 2006-11
- Volume
- 162
- Issue
- 1
- Pages
- 228-238
- ISSN
- 0378-7753 (ISSN-L)
- OpenAlex
- W1970779109
- Cited by
- 551
- References
- 22
- FWCI
- 15.18
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.