The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Efficient fast-charging of lithium-ion batteries enabled by laser-patterned three-dimensional graphite anode architectures
Open accessAbstract
Abstract Enabling high-energy-density lithium-ion batteries that can charge in less than 10 min would accelerate public acceptance of electric vehicles. However, in order to achieve high energy densities, thick electrodes are often used, which suffer from transport limitations. This leads to a tradeoff between power performance and energy density. Here, we demonstrate a laser-patterning process to produce three-dimensional graphite anode architectures. This process results in a highly ordered laser-patterned electrode (HOLE) with arrays of vertical pore channels through the anode thickness that serve as diffusion paths for rapid ionic transport. We apply the HOLE design on industrially-relevant cells (>2 Ah pouch cells) and electrode conditions (>3 mAh/cm2 graphite anodes) and demonstrate > 97% and >93% capacity retention after 100 cycles of 4C and 6C fast-charge cycling, respectively, compared to 69% and 59% for unpatterned electrodes under the same conditions. After 600 fast-charge cycles, the capacity retention of the HOLE cells is 91% at 4C and 86% at 6C charge rates. Moreover, the HOLE design allows for cells to access >90% of the total cell capacity during fast charging, providing a pathway towards safe fast-charging of high-energy-density batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Doyle, M., Fuller, T. F., & Newman, J. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221597 · Cited by 4,328
Performance and cost of materials for lithium-based rechargeable automotive batteries
Schmuch, R., Wagner, R., Hörpel, G., Placke, T., & Winter, M. (2018) · Nature Energy · doi:10.1038/s41560-018-0107-2 · Cited by 3,233
Commercialization of Lithium Battery Technologies for Electric Vehicles
Zeng, X., Li, M., Abd El‐Hady, D., Alshitari, W., Al‐Bogami, A. S., Lu, J., & Amine, K. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900161 · Cited by 1,542
Automotive Li-Ion Batteries: Current Status and Future Perspectives
Ding, Y., Cano, Z. P., Yu, A., Lu, J., & Chen, Z. (2019) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0022-z · Cited by 1,370
Dead lithium: mass transport effects on voltage, capacity, and failure of lithium metal anodes
Chen, K.-H., Wood, K. N., Kazyak, E., LePage, W. S., Davis, A. L., Sanchez, A. J., & Dasgupta, N. P. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00371d · Cited by 1,007
Self-citationWood, K. N., Kazyak, E., Chadwick, A. F., Chen, K.-H., Zhang, J.-G., Thornton, K., & Dasgupta, N. P. (2016) · ACS Central Science · doi:10.1021/acscentsci.6b00260 · Cited by 900
Self-citationLi plating as unwanted side reaction in commercial Li-ion cells – A review
Waldmann, T., Hogg, B.-I., & Wohlfahrt-Mehrens, M. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.02.063 · Cited by 895
Characterization and performance evaluation of lithium-ion battery separators
Lagadec, M. F., Zahn, R., & Wood, V. (2018) · Nature Energy · doi:10.1038/s41560-018-0295-9 · Cited by 812
Lithium plating in a commercial lithium-ion battery – A low-temperature aging study
Petzl, M., Kasper, M., & Danzer, M. A. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.11.065 · Cited by 731
Magnetically aligned graphite electrodes for high-rate performance Li-ion batteries
Billaud, J., Bouville, F., Magrini, T., Villevieille, C., & Studart, A. R. (2016) · Nature Energy · doi:10.1038/nenergy.2016.97 · Cited by 671
Optimizing Areal Capacities through Understanding the Limitations of Lithium-Ion Electrodes
Gallagher, K. G., Trask, S. E., Bauer, C., Woehrle, T., Lux, S. F., Tschech, M., Lamp, P., Polzin, B. J., Ha, S., Long, B., et al. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0321602jes · Cited by 646
Enabling fast charging – A battery technology gap assessment
Ahmed, S., Bloom, I., Jansen, A. N., Tanim, T., Dufek, E. J., Pesaran, A., Burnham, A., Carlson, R. B., Dias, F., Hardy, K., et al. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.06.055 · Cited by 498
Kim, N., Chae, S., Ma, J., Ko, M., & Cho, J. (2017) · Nature Communications · doi:10.1038/s41467-017-00973-y · Cited by 434
High-performance battery electrodes via magnetic templating
Sander, J. S., Erb, R. M., Li, L., Gurijala, A., & Chiang, Y.-M. (2016) · Nature Energy · doi:10.1038/nenergy.2016.99 · Cited by 409
Asymmetric Temperature Modulation for Extreme Fast Charging of Lithium-Ion Batteries
Yang, X.-G., Liu, T., Gao, Y., Ge, S., Leng, Y., Wang, D., & Wang, C.-Y. (2019) · Joule · doi:10.1016/j.joule.2019.09.021 · Cited by 393
Li, B., Bian, K., Lane, J. M. D., Salerno, K. M., Grest, G. S., Ao, T., Hickman, R., Wise, J., Wang, Z., & Fan, H. (2017) · Nature Communications · doi:10.1038/ncomms15574 · Cited by 371
Understanding the trilemma of fast charging, energy density and cycle life of lithium-ion batteries
Yang, X.-G., & Wang, C.-Y. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.09.069 · Cited by 365
Bae, C., Erdonmez, C. K., Halloran, J. W., & Chiang, Y. (2013) · Advanced Materials · doi:10.1002/adma.201204055 · Cited by 307
Colclasure, A. M., Dunlop, A. R., Trask, S. E., Polzin, B. J., Jansen, A. N., & Smith, K. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0451908jes · Cited by 252
A review of laser electrode processing for development and manufacturing of lithium-ion batteries
Pfleging, W. (2018) · Nanophotonics · doi:10.1515/nanoph-2017-0044 · Cited by 216
Heubner, C., Schneider, M., & Michaelis, A. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201902523 · Cited by 210
Hierarchical battery electrodes based on inverted opal structures
Sakamoto, J. S., & Dunn, B. (2002) · Journal of Materials Chemistry · doi:10.1039/b205634h · Cited by 201
Self-citationEnabling fast charging – Infrastructure and economic considerations
Burnham, A., Dufek, E. J., Stephens, T., Francfort, J., Michelbacher, C., Carlson, R. B., Zhang, J., Vijayagopal, R., Dias, F., Mohanpurkar, M., et al. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.06.079 · Cited by 194
Enabling fast charging – Vehicle considerations
Meintz, A., Zhang, J., Vijayagopal, R., Kreutzer, C., Ahmed, S., Bloom, I., Burnham, A., Carlson, R. B., Dias, F., Dufek, E. J., et al. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.07.093 · Cited by 190
Future high-energy density anode materials from an automotive application perspective
Andre, D., Hain, H., Lamp, P., Maglia, F., & Stiaszny, B. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta03108d · Cited by 174
Mussa, A. S., Liivat, A., Marzano, F. L., Klett, M., Philippe, B., Tengstedt, C., Lindbergh, G., Edström, K., Lindström, R. W., & Svens, P. I. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.02.095 · Cited by 116
Kim, D.-H., Hwang, S., Cho, J., Yu, S., Kim, S., Jeon, J., Ahn, K. H., Lee, C., Song, H., & Lee, H. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b00724 · Cited by 108
Habedank, J. B., Kraft, L., Rheinfeld, A., Krezdorn, C., Jossen, A., & Zaeh, M. F. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.1181807jes · Cited by 107
Habedank, J. B., Kriegler, J., & Zaeh, M. F. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.1241915jes · Cited by 104
Design of Bi-Tortuous, Anisotropic Graphite Anodes for Fast Ion-Transport in Li-Ion Batteries
Nemani, V. P., Harris, S. J., & Smith, K. C. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0151508jes · Cited by 87
Kraft, L., Habedank, J. B., Frank, A., Rheinfeld, A., & Jossen, A. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0062001jes · Cited by 83
Improving Li-ion battery charge rate acceptance through highly ordered hierarchical electrode design
Kim, Y., Drews, A. R., Chandrasekaran, R., Miller, T. J., & Sakamoto, J. S. (2018) · Ionics · doi:10.1007/s11581-018-2502-x · Cited by 47
Self-citationJones, J., Smart, M. C., Krause, F. C., Ratnakumar, B. V., & Brandon, E. J. (2017) · ECS Transactions · doi:10.1149/07521.0001ecst · Cited by 28
Cited by
Fast Charging of Lithium‐Ion Batteries: A Review of Materials Aspects
Weiss, M., Ruess, R., Kasnatscheew, J., Levartovsky, Y., Levy, N. R., Minnmann, P., Stolz, L., Waldmann, T., Wohlfahrt‐Mehrens, M., Aurbach, D., et al. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202101126 · Cited by 1,055
Fast charging of energy-dense lithium-ion batteries
Wang, C.-Y., Liu, T., Yang, X.-G., Ge, S., Stanley, N. V., Rountree, E. S., Leng, Y., & McCarthy, B. D. (2022) · Nature · doi:10.1038/s41586-022-05281-0 · Cited by 988
Jiang, M., Danilov, D. L., Eichel, R., & Notten, P. H. L. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202103005 · Cited by 720
Fast Charging Anode Materials for Lithium‐Ion Batteries: Current Status and Perspectives
Li, S., Wang, K., Zhang, G., Li, S., Xu, Y., Zhang, X., Zhang, X., Zheng, S., Sun, X., & Ma, Y. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202200796 · Cited by 607
Liu, Y., Shi, H., & Wu, Z.-S. (2023) · Energy & Environmental Science · doi:10.1039/d3ee02213g · Cited by 395
Metadata
- Authors
- Chen, K.-H., Namkoong, M. J., Goel, V., Yang, C., Kazemiabnavi, S., Mortuza, S. M., Kazyak, E., Mazumder, J., Thornton, K., Sakamoto, J., & Dasgupta, N. P.
- Venue
- Journal of Power Sources
- Publisher
- Elsevier BV
- Published
- 2020-09
- Volume
- 471
- Pages
- 228475
- ISSN
- 0378-7753 (ISSN-L)
- OpenAlex
- W3037048068
- Cited by
- 313
- References
- 33
- FWCI
- 13.59
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.