Physics-based prognostics of implantable-grade lithium-ion battery for remaining useful life prediction
Open accessThe DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Abstract
Abstract Accurately predicting the remaining useful life (RUL) of a lithium-ion battery is essential for health management of both the battery and its host device. We propose a physics-based prognostics approach for prediction of the capacity and RUL of an implantable-grade lithium-ion battery by simultaneously considering multiple degradation mechanisms, including the losses of active materials of the positive and negative electrodes and the loss of lithium inventory. Unlike traditional capacity-based prognostics that exclusively relies on the empirical capacity fade trend, the proposed approach leverages a half-cell model to 1) estimate degradation parameters from voltage and capacity measurements to quantify the degradation mechanisms and 2) predict the capacity fade trend based on the estimated parameters. We compare the performance of the proposed physics-based approach with that of the traditional capacity-based approach on eight implantable-grade lithium-ion cells that have been subjected to continuous charge–discharge cycling over 1.5 years at high temperature. The proposed approach achieves a more accurate RUL prediction than the traditional capacity-based approach. The results show that the proposed physics-based approach, which extrapolates the degradation parameters, can provide a more accurate and conservative RUL prediction when compared to extrapolating just the capacity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on the key issues for lithium-ion battery management in electric vehicles
Lu, L., Han, X., Li, J., Hua, J., & Ouyang, M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.060 · Cited by 4,837 · cited 1×
“Applying a relatively high temperature accelerates the capacity fade while maintaining the stability of the battery materials [51].”
BackgroundData-driven prediction of battery cycle life before capacity degradation
Severson, K. A., Attia, P. M., Jin, N., Perkins, N., Jiang, B., Yang, Z., Chen, M. H., Aykol, M., Herring, P. K., Fraggedakis, D., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0356-8 · Cited by 3,228
Degradation diagnostics for lithium ion cells
Birkl, C. R., Roberts, M. R., McTurk, E., Bruce, P. G., & Howey, D. A. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.12.011 · Cited by 1,945 · cited 7×
“However, dV/dQ analysis is susceptible to noise from measurements [39].”
BackgroundMethodInfluentialCapacity Fade Mechanisms and Side Reactions in Lithium‐Ion Batteries
Arora, P., White, R. E., & Doyle, M. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838857 · Cited by 1,408 · cited 1×
“Despite their advantages, the performance of Li-ion battery cells decreases over time due to capacity fade and increased internal resistance [1,11].”
BackgroundZhang, Y., Xiong, R., He, H., & Pecht, M. G. (2018) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2018.2805189 · Cited by 1,326
Data-driven health estimation and lifetime prediction of lithium-ion batteries: A review
Li, Y., Liu, K., Foley, A. M., Zülke, A., Berecibar, M., Nanini-Maury, E., Van Mierlo, J., & Hoster, H. E. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109254 · Cited by 1,193 · cited 2×
“, machine learning models) to predict the battery RUL [31].”
BackgroundMethodHe, W., Williard, N., Osterman, M., & Pecht, M. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.08.040 · Cited by 1,105 · cited 2×
“[21] used the Dempster–Shafer theory of evidence to initialize the parameters of a capacity fade model using training data and a particle filter to predict the battery RUL.”
BackgroundMethodPrognostics methods for battery health monitoring using a bayesian framework
Saha, B., Goebel, K., Poll, S., & Christophersen, J. (2009) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2008.2005965 · Cited by 831
Gaussian process regression for forecasting battery state of health
Richardson, R. R., Osborne, M. A., & Howey, D. A. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.05.004 · Cited by 732
Calendar Aging of Lithium-Ion Batteries: I. Impact of the Graphite Anode on Capacity Fade
Keil, P., Schuster, S. F., Wilhelm, J., Travi, J., Hauser, A., Karl, R. C., & Jossen, A. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0411609jes · Cited by 669
Nuhic, A., Terzimehic, T., Soczka-Guth, T., Buchholz, M., & Dietmayer, K. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.11.146 · Cited by 664
Differential voltage analyses of high-power, lithium-ion cells
Bloom, I., Jansen, A. N., Abraham, D. P., Knuth, J., Jones, S. A., Battaglia, V. S., & Henriksen, G. L. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.07.021 · Cited by 585 · cited 3×
“active material losses [36], [38], [39], [46], and lithium plating [47].”
BackgroundMethodWang, D., Miao, Q., & Pecht, M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.129 · Cited by 351 · cited 1×
“[22] simplified its four-coefficient exponential structure into a three-coefficient model by applying a second-order power series approximation to one exponential term in the original formulation.”
MethodAn Adaptive Recurrent Neural Network for Remaining Useful Life Prediction of Lithium-ion Batteries
Liu, J., Saxena, A., Goebel, K., Saha, B., & Wang, W. (2010) · Annual Conference of the PHM Society · doi:10.36001/phmconf.2010.v2i1.1896 · Cited by 274 · cited 1×
“in relation to data-driven approaches [14]–[19], model-based approaches [20]–[24], and hybrid approaches [25]–[28].”
Dahn, H. M., Smith, A. J., Burns, J. C., Stevens, D. A., & Dahn, J. R. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.013209jes · Cited by 246
Wu, L., Fu, X., & Guan, Y. (2016) · Applied Sciences · doi:10.3390/app6060166 · Cited by 203 · cited 1×
“approaches rely solely on available battery degradation data, prior physical knowledge about battery degradation mechanisms is not necessary [30,31].”
Method
Cited by
Physics-informed neural network for lithium-ion battery degradation stable modeling and prognosis
Wang, F., Zhai, Z., Zhao, Z., Di, Y., & Chen, X. (2024) · Nature Communications · doi:10.1038/s41467-024-48779-z · Cited by 897
“Lui et al. 19 proposed a physics-based approach to predict the capacity of lithium-ion batteries by modeling degradation mechanisms such as losses of active materials of the positive and negative electrodes and the loss of lithium inventory.”
A comprehensive review of digital twin — part 1: modeling and twinning enabling technologies
Thelen, A., Zhang, X., Fink, O., Lu, Y., Ghosh, S., Youn, B. D., Todd, M. D., Mahadevan, S., Hu, C., & Hu, Z. (2022) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-022-03425-4 · Cited by 441
Self-citationHealth prognostics for lithium-ion batteries: mechanisms, methods, and prospects
Che, Y., Hu, X., Lin, X., Guo, J., & Teodorescu, R. (2023) · Energy & Environmental Science · doi:10.1039/d2ee03019e · Cited by 413
The challenge and opportunity of battery lifetime prediction from field data
Sulzer, V., Mohtat, P., Aitio, A., Lee, S., Yeh, Y. T., Steinbacher, F., Khan, M. U., Lee, J. W., Siegel, J. B., Stefanopoulou, A. G., et al. (2021) · Joule · doi:10.1016/j.joule.2021.06.005 · Cited by 411
Wang, S., Jin, S., Bai, D., Fan, Y., Shi, H., & Fernandez, C. (2021) · Energy Reports · doi:10.1016/j.egyr.2021.08.182 · Cited by 258
Metadata
- Authors
- Lui, Y. H., Li, M., Downey, A., Shen, S., Nemani, V. P., Ye, H., VanElzen, C., Jain, G., Hu, S., Laflamme, S., & Hu, C.
- Venue
- Journal of Power Sources
- Publisher
- Elsevier BV
- Published
- 2021-02
- Volume
- 485
- Pages
- 229327
- ISSN
- 0378-7753 (ISSN-L)
- OpenAlex
- W3111531074
- Cited by
- 142
- References
- 16
- FWCI
- 5.51
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.