The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Light-weighting in aerospace component and system design
Open accessAbstract
Light-weighting involves the use of advanced materials and engineering methods to enable structural elements to deliver the same, or enhanced, technical performance while using less material. The concept has been extensively explored and utilised in many industries from automotive applications to fashion and packaging and offers significant potential in the aviation sector. Typical implementations of light-weighting have involved use of high performance materials such as composites and optimisation of structures using computational aided engineering approaches with production enabled by advanced manufacturing methods such as additive manufacture, foam metals and hot forming. This paper reviews the principal approaches used in light-weighting, along with the scope for application of light-weighting in aviation applications from power-plants to airframe components. A particular area identified as warranting attention and amenable to the use of light-weighting approaches is the design of solar powered aircraft wings. The high aspect ratio typically used for these can be associated with insufficient stiffness, giving rise to non-linear deformation, aileron reversal, flutter and rigid-elastic coupling. Additional applications considered include ultralight aviation components and sub-systems, UAVs, and rockets. Advanced optimisation approaches can be applied to optimise the layout of structural elements, as well as geometrical parameters in order to maximise structural stiffness, minimise mass and enable incorporation of energy storage features. The use of additive manufacturing technologies, some capable of producing composite or multi-material components is an enabler for light-weighting, as features formally associated with one principal function can be designed to fulfil multiple functionalities.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Topology optimization approaches: A comparative review
Sigmund, O., & Maute, K. (2013) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-013-0978-6 · Cited by 2,890
Recent developments in advanced aircraft aluminium alloys
Dursun, T., & Soutis, C. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.12.002 · Cited by 2,807
(2005) · Springer eBooks · doi:10.1007/3-540-27659-9 · Cited by 2,370
(2017) · Encyclopedia of Machine Learning and Data Mining · doi:10.1007/978-1-4899-7687-1_100317 · Cited by 2,127
Additive manufacturing: technology, applications and research needs
Guo, N., & Leu, M. C. (2013) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-013-0248-8 · Cited by 2,073
Additive manufacturing and its societal impact: a literature review
Huang, S. H., Liu, P., Mokasdar, A., & Hou, L. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4558-5 · Cited by 1,862
Bendsøe, M. P., & Sigmund, O. (2004) · Springer eBooks · doi:10.1007/978-3-662-05086-6 · Cited by 1,727
Ning, F., Cong, W., Qiu, J., Wei, J., & Wang, S. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2015.06.013 · Cited by 1,718
Xu, W., Brandt, M., Sun, S., Elambasseril, J., Liu, Q., Latham, K., Xia, K., & Qian, M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.11.028 · Cited by 1,245
A review of recent research on mechanics of multifunctional composite materials and structures
Gibson, R. F. (2010) · Composite Structures · doi:10.1016/j.compstruct.2010.05.003 · Cited by 1,141
Shape memory polymers and their composites in aerospace applications: a review
Liu, Y., Du, H., Liu, L., & Leng, J. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/2/023001 · Cited by 1,056
The Evolution of Al-Li Base Products for Aerospace and Space Applications
Rioja, R. J., & Liu, J. (2012) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-012-1155-z · Cited by 1,048
Level-set methods for structural topology optimization: a review
van Dijk, N. P., Maute, K., Langelaar, M., & van Keulen, F. (2013) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-013-0912-y · Cited by 1,008
A review: Fibre metal laminates, background, bonding types and applied test methods
Sınmazçelik, T., Avcu, E., Bora, M. Ö., et al. (2011) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2011.03.011 · Cited by 995
Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations
Huang, Y., Leu, M. C., Mazumder, J., & Donmez, A. (2015) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028725 · Cited by 947
Self-healing structural composite materials
Kessler, M. R., Sottos, N. R., & White, S. R. (2003) · Composites Part A Applied Science and Manufacturing · doi:10.1016/s1359-835x(03)00138-6 · Cited by 826
Li, Y., & Gu, D. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.07.006 · Cited by 824
Self-healing polymer nanocomposite materials: A review
Thakur, V. K., & Kessler, M. R. (2015) · Polymer · doi:10.1016/j.polymer.2015.04.086 · Cited by 667
A review of shape memory polymer composites and blends
Meng, Q., & Hu, J. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.08.011 · Cited by 609
An assessment of the science and technology of carbon nanotube-based fibers and composites
Chou, T.-W., Gao, L., Thostenson, E. T., Zhang, Z., & Byun, J.-H. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.10.004 · Cited by 566
A self-healing carbon fibre reinforced polymer for aerospace applications
Williams, G., Trask, R., & Bond, I. (2007) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2007.01.013 · Cited by 518
Manufacturing Technology for Aerospace Structural Materials
(2006) · Elsevier eBooks · doi:10.1016/b978-1-85617-495-4.x5000-8 · Cited by 516
Introduction to Aerospace Materials
Mouritz, A. (2012) · American Institute of Aeronautics and Astronautics eBooks · doi:10.2514/4.869198 · Cited by 511
Liu, R., Zhang, C., Nassehi, A., & Newman, S. (2006) · Cited by 356
Additive manufacturing of multi-directional preforms for composites: opportunities and challenges
Quan, Z., Wu, A., Keefe, M., Qin, X., Yu, J., Suhr, J., Byun, J.-H., Kim, B.-S., & Chou, T.-W. (2015) · Materials Today · doi:10.1016/j.mattod.2015.05.001 · Cited by 324
A Review of Metal Foam and Metal Matrix Composites for Heat Exchangers and Heat Sinks
Han, X.-H., Wang, Q., Park, Y.-G., T’Joen, C., Sommers, A., & Jacobi, A. (2012) · Heat Transfer Engineering · doi:10.1080/01457632.2012.659613 · Cited by 279
Computational efficiency and validation of bi-directional evolutionary structural optimisation
Querin, O. M., Young, V., Steven, G. P., & Xie, Y. M. (2000) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/s0045-7825(99)00309-6 · Cited by 263
Challenges and Opportunities in Multifunctional Nanocomposite Structures for Aerospace Applications
Baur, J., & Silverman, E. (2007) · MRS Bulletin · doi:10.1557/mrs2007.231 · Cited by 235
Research process on property and application of metal porous materials
Qin, J., Chen, Q., Yang, C., & Huang, Y. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.09.148 · Cited by 187
Advanced design for lightweight structures: Review and prospects
Braga, D. F. O., Tavares, S. M. O., da Silva, L. F. M., Moreira, P. M. G. P., & de Castro, P. M. S. T. (2014) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2014.03.003 · Cited by 174
Lattice Structure Design and Optimization With Additive Manufacturing Constraints
Tang, Y., Dong, G., Zhou, Q., & Zhao, Y. F. (2017) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2017.2685643 · Cited by 163
Solar-powered airplanes: A historical perspective and future challenges
Zhu, X., Guo, Z., & Hou, Z. (2014) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2014.06.003 · Cited by 158
Park, G.-J. (2010) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-010-0530-x · Cited by 155
Research Progress of Phase Change Materials (PCMs) Embedded with Metal Foam (a Review)
Chen, J., Yang, D., Jiang, J., Ma, A., & Song, D. (2014) · Procedia Materials Science · doi:10.1016/j.mspro.2014.07.579 · Cited by 145
Progress in Topology Optimization with Manufacturing Constraints
Zhou, M., Fleury, R., Shyy, Y. K., Thomas, H., & Brennan, J. (2002) · AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization (MAO) · doi:10.2514/6.2002-5614 · Cited by 121
Robbins, J., Owen, S. J., Clark, B. W., & Voth, T. E. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.06.013 · Cited by 108
Modelling for randomly oriented multi material additive manufacturing component and its fabrication
Sugavaneswaran, M., & Arumaikkannu, G. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.08.102 · Cited by 106
Mechanical Design Engineering Handbook
(2018) · Elsevier eBooks · doi:10.1016/c2016-0-05252-x · Cited by 101
Introduction to aerospace materials
(2012) · Elsevier eBooks · doi:10.1533/9780857095152.1 · Cited by 97
A Low Cost Desktop Electrochemical Metal 3D Printer
Chen, X., Liu, X., Childs, P., Brandon, N. P., & Wu, B. (2017) · Advanced Materials Technologies · doi:10.1002/admt.201700148 · Cited by 82
Self-citationStructural optimization of 3D masonry buildings
Whiting, E., Shin, H. V., Wang, R., et al. (2012) · ACM Transactions on Graphics · doi:10.1145/2366145.2366178 · Cited by 67
Future aircraft cabins and design thinking: optimisation vs. win-win scenarios
Hall, A., Mayer, T., Wuggetzer, I., & Childs, P. (2013) · Propulsion and Power Research · doi:10.1016/j.jppr.2013.04.001 · Cited by 56
Self-citationBlended Wing Body Architecting and Design: Current Status and Future Prospects
Ordoukhanian, E., & Madni, A. M. (2014) · Procedia Computer Science · doi:10.1016/j.procs.2014.03.075 · Cited by 39
Ide, T., Otomori, M., Leiva, J. P., & Watson, B. C. (2014) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-014-1143-6 · Cited by 31
Cited by
Strategies for improving the sustainability of structural metals
Raabe, D., Tasan, C. C., & Olivetti, E. A. (2019) · Nature · doi:10.1038/s41586-019-1702-5 · Cited by 724
Design and Optimization of Lattice Structures: A Review
Pan, C., Han, Y., & Lu, J. (2020) · Applied Sciences · doi:10.3390/app10186374 · Cited by 640
Metal additive manufacturing in the commercial aviation industry: A review
Gisario, A., Kazarian, M., Martina, F., & Mehrpouya, M. (2019) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2019.08.005 · Cited by 574
Advances in 3D printing of thermoplastic polymer composites and nanocomposites
Valino, A. D., Dizon, J. R. C., Espera, A. H., Chen, Q., Messman, J., & Advincula, R. C. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.101162 · Cited by 565
Additive manufacturing of polymeric composites from material processing to structural design
Yuan, S., Li, S., Zhu, J., & Tang, Y. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.108903 · Cited by 267
Metadata
- Authors
- Zhu, L., Li, N., & Childs, P. R. N.
- Venue
- Propulsion and Power Research
- Publisher
- Elsevier BV
- Published
- 2018-06
- Volume
- 7
- Issue
- 2
- Pages
- 103-119
- ISSN
- 2212-540X (ISSN-L)
- OpenAlex
- W2805649080
- Cited by
- 583
- References
- 45
- FWCI
- 15.11
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.