The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
XCT analysis of the influence of melt strategies on defect population in Ti–6Al–4V components manufactured by Selective Electron Beam Melting
Open accessAbstract
Selective Electron Beam Melting (SEBM) is a promising powder bed Additive Manufacturing technique for near-net-shape manufacture of high-value titanium components. However without post-manufacture HIPing the fatigue life of SEBM parts is currently dominated by the presence of porosity. In this study, the size, volume fraction, and spatial distribution of the pores in model samples have been characterised in 3D, using X-ray Computed Tomography, and correlated to the process variables. The average volume fraction of the pores (< 0.2%) was measured to be lower than that usually observed in competing processes, such as selective laser melting, but a strong relationship was found with the different beam strategies used to contour, and infill by hatching, a part section. The majority of pores were found to be small spherical gas pores, concentrated in the infill hatched region; this was attributed to the lower energy density and less focused beam used in the infill strategy allowing less opportunity for gas bubbles to escape the melt pool. Overall, increasing the energy density or focus of the beam was found to correlate strongly to a reduction in the level of gas porosity. Rarer irregular shaped pores were mostly located in the contour region and have been attributed to a lack of fusion between powder particles.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Threshold Selection Method from Gray-Level Histograms
Otsu, N. (1979) · IEEE Transactions on Systems, Man, and Cybernetics · doi:10.1109/tsmc.1979.4310076 · Cited by 43,398
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
Thijs, L., Verhaeghe, F., Craeghs, T., Humbeeck, J. V., & Kruth, J.-P. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.02.004 · Cited by 2,929
Binding mechanisms in selective laser sintering and selective laser melting
Kruth, J., Mercelis, P., Van Vaerenbergh, J., Froyen, L., & Rombouts, M. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510573365 · Cited by 1,383
Maire, E., & Withers, P. J. (2014) · International Materials Reviews · doi:10.1179/1743280413y.0000000023 · Cited by 1,374
Peterson's Stress Concentration Factors
Pilkey, W. D. (1997) · Wiley eBooks · doi:10.1002/9780470172674 · Cited by 885
Al-Bermani, S. S., Blackmore, M., Zhang, W., & Todd, I. (2010) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-010-0397-x · Cited by 860
Self-citationQiu, C., Adkins, N. J. E., & Attallah, M. M. (2013) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.04.099 · Cited by 821
Heinl, P., Müller, L., Körner, C., Singer, R. F., & Müller, F. A. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.03.013 · Cited by 815
Antonysamy, A. A., Meyer, J., & Prangnell, P. B. (2013) · Materials Characterization · doi:10.1016/j.matchar.2013.07.012 · Cited by 747
Self-citationManufacture by selective laser melting and mechanical behavior of commercially pure titanium
Attar, H., Calin, M., Zhang, L. C., Scudino, S., & Eckert, J. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.11.038 · Cited by 744
Peterson's Stress Concentration Factors
Pilkey, W. D., & Pilkey, D. F. (2007) · Wiley eBooks · doi:10.1002/9780470211106 · Cited by 716
Computed tomography for dimensional metrology
Kruth, J. P., Bartscher, M., Carmignato, S., Schmitt, R., De Chiffre, L., & Weckenmann, A. (2011) · CIRP Annals · doi:10.1016/j.cirp.2011.05.006 · Cited by 684
Murr, L. E., Esquivel, E. V., Quinones, S. A., Gaytan, S. M., Lopez, M. I., Martinez, E. Y., Medina, F., Hernandez, D. H., Martinez, E., Martinez, J. L., et al. (2009) · Materials Characterization · doi:10.1016/j.matchar.2008.07.006 · Cited by 564
Murr, L. E., Gaytan, S. M., Ceylan, A., Martinez, E., Martinez, J. L., Hernandez, D. H., Machado, B. I., Ramirez, D. A., Medina, F., Collins, S., et al. (2010) · Acta Materialia · doi:10.1016/j.actamat.2009.11.032 · Cited by 526
Recent advances in X-ray microtomography applied to materials
Stock, S. R. (2008) · International Materials Reviews · doi:10.1179/174328008x277803 · Cited by 517
Electron Beam Additive Manufacturing of Titanium Components: Properties and Performance
Edwards, P., O'Conner, A., & Ramulu, M. (2013) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4025773 · Cited by 450
Kobryn, P. A., Moore, E. H., & Semiatin, S. L. (2000) · Scripta Materialia · doi:10.1016/s1359-6462(00)00408-5 · Cited by 428
Defect generation and propagation mechanism during additive manufacturing by selective beam melting
Bauereiß, A., Scharowsky, T., & Körner, C. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2014.05.002 · Cited by 351
Hrabe, N. W., & Quinn, T. P. (2013) · Materials Science and Engineering A · doi:10.1016/j.msea.2013.02.065 · Cited by 349
Chan, K. S., Koike, M., Mason, R. L., & Okabe, T. (2013) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-012-1470-4 · Cited by 320
Fabrication of Ti-6Al-4V Scaffolds by Direct Metal Deposition
Dinda, G. P., Song, L., & Mazumder, J. (2008) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-008-9634-y · Cited by 288
Koike, M., Greer, P., Owen, K., Guo, L., Murr, L. E., Gaytan, S. M., Martinez, E., & Okabe, T. H. (2011) · Materials · doi:10.3390/ma4101776 · Cited by 270
Karlsson, J., Snis, A., Engqvist, H., & Lausmaa, J. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.06.010 · Cited by 254
Hrabe, N., & Quinn, T. (2013) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.02.064 · Cited by 252
Advanced metal powder based manufacturing of complex components by electron beam melting
Gaytan, S. M., Murr, L. E., Medina, F. R., Martinez, E., Lopez, M. I., & Wicker, R. B. (2009) · Materials Technology · doi:10.1179/106678509x12475882446133 · Cited by 235
Porosity formation and gas bubble retention in laser metal deposition
Ng, G. K. L., Jarfors, A. E. W., Bi, G., & Zheng, H. Y. (2009) · Applied Physics A · doi:10.1007/s00339-009-5266-3 · Cited by 230
Juechter, V., Scharowsky, T., Singer, R. F., & Körner, C. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.05.037 · Cited by 227
Ziółkowski, G., Chlebus, E., Szymczyk, P., & Kurzac, J. (2014) · Archives of Civil and Mechanical Engineering · doi:10.1016/j.acme.2014.02.003 · Cited by 210
Gong, H., Rafi, K., Starr, T. L., & Stucker, B. E. (2013) · Texas Digital Library (University of Texas) · doi:10.26153/tsw/15565 · Cited by 91
Effect of Melt Scan Rate on Microstructure and Macrostructure for Electron Beam Melting of Ti-6Al-4V
Puebla, K., Murr, L. E., Gaytan, S. M., Martinez, E., Medina, F. R., & Wicker, R. B. (2012) · Materials Sciences and Applications · doi:10.4236/msa.2012.35038 · Cited by 85
Cited by
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Additive manufacturing of Ti6Al4V alloy: A review
Liu, S., & Shin, Y. C. (2019) · Materials & Design · doi:10.1016/j.matdes.2018.107552 · Cited by 2,472
Aboulkhair, N. T., Simonelli, M., Parry, L., Ashcroft, I., Tuck, C., & Hague, R. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100578 · Cited by 1,552
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
Everton, S. K., Hirsch, M., Stravroulakis, P., Leach, R. K., & Clare, A. T. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.099 · Cited by 1,469
Kok, Y., Tan, X. P., Wang, P., Nai, M. L. S., Loh, N. H., Liu, E., & Tor, S. B. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.11.021 · Cited by 1,447
Metadata
- Authors
- Tammas-Williams, S., Zhao, H., Léonard, F., Derguti, F., Todd, I., & Prangnell, P. B.
- Venue
- Materials Characterization
- Publisher
- Elsevier BV
- Published
- 2015-04
- Volume
- 102
- Pages
- 47-61
- ISSN
- 1044-5803 (ISSN-L)
- OpenAlex
- W2043225275
- Cited by
- 590
- References
- 32
- FWCI
- 55.25
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.