The DOI matches its Crossref record; 93 of the 98 references it cites were found in a registry or an index.
Influence of thermal post treatments on microstructure and oxidation behavior of EB-PBF manufactured Alloy 718
Abstract
The effect of thermal post treatments consisting of heat treatment (HT), hot isostatic pressing (HIP), and combined HIP-HT on microstructure and oxidation behavior of Alloy 718 manufactured by electron beam powder bed fusion (EB-PBF) technique was investigated. Oxidation of the as-built and post-treated specimens was performed in ambient air at 650, 750, and 850 °C for up to 168 h. Directional columnar-grained microstructure, pores and fine Nb-rich carbides were observed in the as-built specimen. The HT specimen presented the columnar microstructure, plate-like δ phase at grain boundaries, and pores. The dominant grain crystallographic orientation was changed from 〈001〉 in the as-built specimen to 〈101〉 after HT. No grain boundary δ phase was observed in the HIPed specimen, but recrystallization occurred in both the HIP and HIP-HT specimens due to a rapid cooling after HIPing motivating the nucleation of fine grains with limited time to grow. After oxidation exposure at 650 and 750 °C for 168 h, no big difference between weight changes of the as-built and post-treated specimens was noted, whereas at 850 °C, the combined HIP-HT specimen showed the most promising corrosion resistance with the least weight change. At 850 °C, a protective scale of Cr2O3 rich in Cr, Ti, and Ni as well as an internal oxide (branched structure of alumina) developed in all the specimens, while, only a protective Cr2O3 scale was found at 650 and 750 °C. The HIP-HT specimen at 850 °C developed an oxide scale, which was denser and more adherent in comparison to the oxide scales formed on the other three specimens, associated with its limited defect distribution and more homogenized microstructure. Moreover, the δ phase formed close to the surface of the exposed specimens during the oxidation exposure at 850 °C most probably led to nucleation and growth of the oxide scale.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“EB-PBF operates in a vacuum [145], which is particularly well-suited for applications in space environments.”
From A comprehensive review of lunar-based manufacturing and construction (2024) · cites this paper as [145]
In the citing paper
“The use of an electron beam source for in-space manufacturing will be limited to additive manufacturing of metals, with wire or powder feedstock [145,146,307].”
From A comprehensive review of lunar-based manufacturing and construction (2024) · cites this paper as [145]
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Residual stresses in selective laser sintering and selective laser melting
Mercelis, P., & Kruth, J. (2006) · Rapid Prototyping Journal · doi:10.1108/13552540610707013 · Cited by 2,015
Metal Additive Manufacturing: A Review of Mechanical Properties
Lewandowski, J. J., & Seifi, M. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032024 · Cited by 1,722
Self-citationCarroll, B. E., Palmer, T. A., & Beese, A. M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.12.054 · Cited by 1,507
Jia, Q., & Gu, D. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.09.171 · Cited by 905
Chlebus, E., Gruber, K., Kuźnicka, B., Kurzac, J., & Kurzynowski, T. (2015) · Materials Science and Engineering A · doi:10.1016/j.msea.2015.05.035 · Cited by 787
Zhang, D., Niu, W., Cao, X., & Liu, Z. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.06.021 · Cited by 723
Tucho, W. M., Cuvillier, P., Sjolyst-Kverneland, A., & Hansen, V. F. (2017) · Materials Science and Engineering A · doi:10.1016/j.msea.2017.02.062 · Cited by 682
Shaigan, N., Qu, W., Ivey, D. G., & Chen, W. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.09.069 · Cited by 656
Cited by
Heat treatment for metal additive manufacturing
Laleh, M., Sadeghi, E., Revilla, R. I., Chao, Q., Haghdadi, N., Hughes, A. E., Xu, W., De Graeve, I., Qian, M., Gibson, I., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101051 · Cited by 538
Self-citationDefects and anomalies in powder bed fusion metal additive manufacturing
Mostafaei, A., Zhao, C., He, Y., Reza Ghiaasiaan, S., Shi, B., Shao, S., Shamsaei, N., Wu, Z., Kouraytem, N., Sun, T., et al. (2022) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2021.100974 · Cited by 491
Al-Maharma, A. Y., Patil, S. P., & Markert, B. (2020) · Materials Research Express · doi:10.1088/2053-1591/abcc5d · Cited by 404
Wang, H., Dhiman, A., Ostergaard, H. E., Zhang, Y., Siegmund, T. H., Kruzic, J. J., & Tomar, V. (2019) · International Journal of Plasticity · doi:10.1016/j.ijplas.2019.04.018 · Cited by 116
Haines, M. P., Rielli, V. V., Primig, S., & Haghdadi, N. (2022) · Journal of Materials Science · doi:10.1007/s10853-022-07501-4 · Cited by 126
Chen, L., Sun, Y., Li, L., & Ren, X. (2020) · Corrosion Science · doi:10.1016/j.corsci.2020.108606 · Cited by 71
A comprehensive review of lunar-based manufacturing and construction
Azami, M., Kazemi, Z., Moazen, S., Dubé, M., Potvin, M.-J., & Skonieczny, K. (2024) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2024.101045 · Cited by 57
Ni, M., Chen, C., Xu, R., Hosseini, S., Li, R.-D., Zhang, X.-Y., & Zhou, K. (2022) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2022.165763 · Cited by 45
Huang, W., Li, Y., Ren, Y., Sun, J., Xia, Z., Zhou, L., Li, C., Chen, J., Niu, Y., & Zhao, Y. (2022) · Vacuum · doi:10.1016/j.vacuum.2022.111447 · Cited by 43
Preferential interdendritic oxidation of laser additively manufactured Inconel 718
Luo, G., Cheng, M., Zhao, L., Tang, Y., Yao, J., Cui, H., & Song, L. (2020) · Corrosion Science · doi:10.1016/j.corsci.2020.109144 · Cited by 41
Cyclic oxidation of alloy 718 produced by additive manufacturing compared to a wrought-718 alloy
Sanviemvongsak, T., Monceau, D., Madelain, M., Desgranges, C., Smialek, J. L., & Macquaire, B. (2021) · Corrosion Science · doi:10.1016/j.corsci.2021.109804 · Cited by 41
Sujan, G. K., Li, H., Pan, Z. S., Liang, D., & Alam, N. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.102602 · Cited by 40
Zhang, Q., Zhang, J., Zhuang, Y., Lu, J., & Yao, J. (2020) · Materials · doi:10.3390/ma13092128 · Cited by 39
Considerations for Application of Additive Manufacturing to Nuclear Reactor Core Components
Simpson, J., Haley, J. C., Cramer, C. L., Shafer, O., Elliott, A., Peter, W. H., Love, L. J., & Dehoff, R. (2019) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · doi:10.2172/1564201 · Cited by 50
Chen, L., Yang, Z., Lu, L., Zhang, X., & Ren, X. (2022) · International Journal of Refractory Metals and Hard Materials · doi:10.1016/j.ijrmhm.2022.106027 · Cited by 36
Sadeghi, E., Pant, P., Jafari, R., Peng, R. L., & Karimi, P. (2020) · Materials Characterization · doi:10.1016/j.matchar.2020.110567 · Cited by 34
Self-citationInclusion-induced fatigue crack initiation in powder bed fusion of Alloy 718
Sadeghi, E., Karimi, P., Israelsson, N., Shipley, J., Månsson, T., & Hansson, T. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101670 · Cited by 34
Self-citationGuo, C., Jingchen, W., Lu, H., Wang, Y., Bai, J., Li, G., Yin, Y. J., Yao, L., Zhu, Q., & Lü, J. (2025) · Corrosion Science · doi:10.1016/j.corsci.2025.112719 · Cited by 30
Gong, L., Li, Y., Wang, X., Li, S., Yang, Z., & Chen, H. (2025) · Rare Metals · doi:10.1007/s12598-025-03247-5 · Cited by 38
Karimi, P., Sadeghi, E., Ålgårdh, J., Harlin, P., & Andersson, J. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-04859-9 · Cited by 26
Self-citationAversa, A., Saboori, A., Marchese, G., Iuliano, L., Lombardi, M., & Fino, P. (2021) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-021-06273-3 · Cited by 26
Sadeghi, M., Díaz, A., McFadden, P., & Sadeghi, E. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.110405 · Cited by 25
Self-citationInfluence of precipitates on the initial oxidation behavior of GH4169 superalloy at 1000 °C
Yin, L., Ma, J., Yang, F., Nie, Y., Meng, L., Wang, Y., Zheng, L., Shi, Q.-X., & Liang, W. M. (2025) · Corrosion Communications · doi:10.1016/j.corcom.2024.04.006 · Cited by 22
In-process spectroscopic detection of chromium loss during Directed Energy Deposition of alloy 718
Kisielewicz, A., Sadeghi, E., Sikström, F., Christiansson, A., Palumbo, G., & Ancona, A. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108317 · Cited by 20
Self-citationDžugan, J., Seifi, M., Rzepa, S., Procházka, R., Rund, M., Podaný, P., & Lewandowski, J. J. (2023) · Virtual and Physical Prototyping · doi:10.1080/17452759.2022.2161400 · Cited by 19
Self-citationFatigue Characterization and Modeling of Additively Manufactured Hastelloy-X Superalloy
Esmaeilizadeh, R., Keshavarzkermani, A., Faghih, S., Behravesh, B., Ali, U., Bonakdar, A., Jahed, H., & Toyserkani, E. (2022) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-022-06595-w · Cited by 18
On the thermomechanical aging of LPBF alloy 718
Sanchez, S., Gaspard, G., Hyde, C. J., Ashcroft, I., Ravi, G. A., & Clare, A. T. (2022) · Materials Science and Engineering A · doi:10.1016/j.msea.2022.142998 · Cited by 17
Lv, Y., Ouyang, X., Tian, Y., Yu, H., & Wei, G. (2024) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2024.175166 · Cited by 17
Fan, J., Hong-ci, Y. A. N. G., Zhang, P., Jia-yu, L. I., Jing, Z., Fu-long, C. H. E. N., De-gui, L. I. U., Bin, T. A. N. G., Kou, H., & Li, J. (2024) · Transactions of Nonferrous Metals Society of China · doi:10.1016/s1003-6326(24)66632-x · Cited by 16
Alehojat, M., Jafari, R., Karimi, P., & Sadeghi, E. (2020) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2020.126626 · Cited by 13
Self-citationMadhura, B., Björklund, S., Li, X.-H., Frykholm, R., Kjellman, B., Joshi, S. V., & Markocsan, N. (2024) · Coatings · doi:10.3390/coatings14050626 · Cited by 11
A distinct role of microstructure on hot corrosion behaviour of additively manufactured IN718
Mannava, V., Saravanan, T., Sabari, S. R., Koundinya, N. T. B. N., Venugopal, A., Murty, S., Govind, B., Kamaraj, M., & Kottada, R. S. (2024) · Corrosion Science · doi:10.1016/j.corsci.2024.112550 · Cited by 10
Daroonparvar, M., Musavi, S., Yadav, V. K., Shao, S., & Shamsaei, N. (2025) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2025.185069 · Cited by 11
Lerda, S., Bassini, E., Marchese, G., Biamino, S., & Ugues, D. (2024) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2024.05.128 · Cited by 10
Andrade, B. W., Mariani, F. E., Coelho, R. T., & Malafaia, A. M. D. S. (2024) · High Temperature Corrosion of Materials · doi:10.1007/s11085-024-10283-6 · Cited by 10
High temperature oxidation behavior of Fe–3.0%Si steel with non-equilibrium reaction
Ma, E., Yang, X., Su, Y., Bi, Z., Sun, H., Wang, B., Ma, C., & Zhang, D. (2023) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2023.01.163 · Cited by 10
Li, Y., Dai, H., Zhang, S., Li, B., Ma, Y., Bao, C., Chen, X., & Xuan, F. (2024) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2024.03.078 · Cited by 9
Energy-Assisted additive manufacturing for weldable and non-weldable Ni-based superalloys: a review
Jang, J., Ko, T., Lee, J., Kim, D., Hwang, H., Jeong, T., Kim, H., & Lee, S. H. (2025) · Virtual and Physical Prototyping · doi:10.1080/17452759.2025.2512163 · Cited by 9
Zhao, C., Wang, L., Wang, B., Fan, M., Zhu, G., Su, B., Luo, L., Chen, R., Su, Y., & Guo, J. (2024) · Vacuum · doi:10.1016/j.vacuum.2024.113775 · Cited by 8
The role of secondary phases on SCC initiation of Alloy 718 in simulated PWR primary water
Zhu, T., Wang, J., Song, M., Ren, Q.-Y., Qiu, X., Li, Y., Tang, C., Yi, H., Zhang, J., Tian, W., et al. (2025) · Corrosion Science · doi:10.1016/j.corsci.2025.112930 · Cited by 8
Cheng, Z., Zhou, J., Guo, G., Chen, S., Ye, X., Wei, X., Zhang, Y., & Zhang, Z. (2025) · Materials Science and Engineering A · doi:10.1016/j.msea.2025.148977 · Cited by 13
Wang, L., Du, J., Qi, X., Wang, J., Lu, L., Li, F., & Li, Y. (2025) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2025.184740 · Cited by 8
Di, K., Zhao, H., Huang, Z., Ma, Z., Wu, S., & Li, M. (2023) · Materials Today Communications · doi:10.1016/j.mtcomm.2023.107583 · Cited by 8
Liu, M., Wei, X., Zhao, Y., Chen, Y., Cao, L., Wu, W., Li, X., Pei, X., Li, A., Wang, L., et al. (2026) · Acta Materialia · doi:10.1016/j.actamat.2026.121924 · Cited by 7
Guo, C., Zhou, Y., Yin, Y. J., Liu, R., & Zhu, Q. (2024) · Materials Science and Engineering A · doi:10.1016/j.msea.2024.146717 · Cited by 6
Kumar, A., Mukherjee, R., & Singh, M. K. (2025) · Wear · doi:10.1016/j.wear.2025.206384 · Cited by 4
Su, J., Hu, M., Shao, J., Liu, Z., Meng, S., Tang, J., & Luo, Z. (2026) · Materials Characterization · doi:10.1016/j.matchar.2026.116074 · Cited by 4
Long-term oxidation behavior of additively manufactured Inconel 625 alloys at 900 °C and 1100 °C
Ko, D., Lee, S., Choi, M., Lee, H., Han, H., Han, S., Kim, D., & Lee, B. (2026) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2026.02.091 · Cited by 3
Liang, Z., Liu, S., Chen, S., & Wang, H. (2026) · Materials Science and Engineering A · doi:10.1016/j.msea.2026.150393 · Cited by 3
Lv, Y., Ouyang, X., Liu, Y., Tian, Y., Wang, R., & Wei, G. (2024) · Anti-Corrosion Methods and Materials · doi:10.1108/acmm-06-2024-3031 · Cited by 3
Lesyk, D., Mordyuk, B. N., Charit, I., Raja, K. S., Lytvynenko, M. P., Tyshchenko, A. I., Pedash, O., Kоtkо, А. V., & Lamíkiz, A. (2026) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-026-17469-z · Cited by 2
Sanviemvongsak, T. (2020) · theses.fr (ABES) · doi:10.70675/12c09eedz55c0z4860z84d4z659cca161034 · Cited by 2
Chen, F., Zhang, W., Zaharuddin, M. F. A., Suhaimi, M. A., Ali, W. F. F. W., & Chang, B. (2026) · Welding International · doi:10.1080/09507116.2025.2605247 · Cited by 1
Lesyk, D., Mordyuk, B. N., Martínez, S., Pedash, O., & Lamíkiz, A. (2026) · Lecture notes in mechanical engineering · doi:10.1007/978-3-032-14926-8_38 · Cited by 1
Cao, Y., Shang, Q., Bai, P., Liu, F., & Hou, X. (2026) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2026.188596 · Cited by 1
Zhang, J., Zhou, S., Yu, H., Dai, G., Lu, H. Y., Liu, Y., & Yang, G. (2026) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2026.06.280 · Cited by 1
Zuo, T., Pei, H., Wen, Z., Wang, S., Liu, M., Yu, K., & Yue, Z. (2026) · Corrosion Science · doi:10.1016/j.corsci.2026.114169 · Cited by 1
Li, D., Hu, B., Jiang, B., & Song, Y. (2025) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-025-11532-8 · Cited by 1
Ni, M., Chen, C., Xu, R., Hosseini, S. R. E., Li, R., Zhang, X., & Zhou, K. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4022304 · Cited by 1
Near-surface microstructures convolute mechanical properties in additively manufactured metals
Fitzgerald, K., Carroll, J. D., Cillessen, D. E., Garland, A. P., Ruggles, T., Johnson, K. L., & Boyce, B. L. (2024) · Additive manufacturing · doi:10.1016/j.addma.2024.104477
Luo, J., Li, R., Wang, C., Huang, X., Ma, X., Zou, X., Xie, S., Cao, M., Li, H., & Pan, L. (2025) · Materials Characterization · doi:10.1016/j.matchar.2025.115579
Cao, Y., Shang, Q., Bai, P., Liu, F., & Hou, X. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5895144
Zhang, X., Yuan, W., Liu, J. H., Wang, C., Zhai, G., Wang, L., & Chu, Y. (2026) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-026-13483-0
Oxidation resistance behaviors of the δ-phase precipitates in Ni-based polycrystalline superalloys
Wu, J., Jiang, C. Z., He, Y. T., Zhou, Z., Deng, J., Xie, P., 伍翠兰, & Chen, J. (2026) · Corrosion Science · doi:10.1016/j.corsci.2026.114048
Kazemi, Z., & Behdinan, K. (2026) · Applied Energy · doi:10.1016/j.apenergy.2026.128311
Li, Z., Qi, L., Fu, C., Chen, Y., Cao, X., Wang, Y., Peng, J., Wang, J., & Han, E. (2026) · Corrosion Communications · doi:10.1016/j.corcom.2026.06.002
High-Temperature Oxidation Behavior of Additively Manufactured Ni-Base Alloys: A Review
Kumar, S., & Raja, V. S. (2026) · CORROSION · doi:10.5006/4943
Achieving excellent oxidation performance of laser additively manufactured Inconel 718
Li, Y., Luo, G., & Song, L. (2026) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2026.08.262
Scan strategy as a microstructure design variable in electron beam powder bed fusion of Inconel 718
You, H., Ismail, S. M., Aguilar, G., & Andani, M. T. (2026) · Materials & Design · doi:10.1016/j.matdes.2026.117045
Yazdanpanah, A., Wouters, B., Kong, D., Franceschi, M., Dolcet, P., Biasiolo, L., D’Ambrosi, L., Hanemann, T., Scian, C., Khodabakhshi, M., et al. (2026) · Corrosion Science · doi:10.1016/j.corsci.2026.114271
Investigation of thermal spray coatings on additively manufactured alloy 718 substrates
Thoutam, A. K., Arbat, A., Sadeghi, E., Hai, X., Kjellman, B., Frykholm, R., Gillberg, P., & Markocsan, N. (2026) · Progress in Additive Manufacturing · doi:10.1007/s40964-026-01991-3
Self-citationZhang, W., Guhui, G., Chen, X., Ren, X., Zhu, L., Liu, Y., Gui, X., & Feng, C. (2026) · International Journal of Minerals Metallurgy and Materials · doi:10.1007/s12613-026-3440-7
Luo, G., Li, Y., Zhao, Z., Zhou, J., Song, L., & Cha, L. (2026) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2026.10.010
Metadata
- Authors
- Sadeghi, E., Karimi, P., Momeni, S., Seifi, M., Eklund, A., & Andersson, J.
- Affiliations
- University West (SE)
- Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- American Society For Testing and Materials (US)
- Quintus Technologies (Sweden) (SE)
- Corresponding author
- Sadeghi, Esmaeil
- Venue
- Materials Characterization
- Publisher
- Elsevier BV
- Published
- 2019-04
- Volume
- 150
- Pages
- 236-251
- ISSN
- 1044-5803 (ISSN-L)
- OpenAlex
- W2913634436
- Cited by
- 74
- References
- 98
- Citations by year
- 2026: 21 · 2025: 12 · 2024: 12 · 2023: 4 · 2022: 11 · 2021: 2 · 2020: 9 · 2019: 3
- FWCI
- 3.52
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- Locations
- Materials Characterization (publishedVersion)
- Funders
- Knowledge Foundation
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Additive Manufacturing Materials and Processes
- Physical Sciences › Engineering › Mechanical Engineering › High Temperature Alloys and Creep
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › High-Temperature Coating Behaviors
- Keywords
- Inconel 718, electron beam melting, post-heat treatment, hot isostatic pressing, heat treatment, oxidation behavior, high-temperature corrosion, microstructure, columnar grains, delta phase, recrystallization, grain orientation, oxide scale, Cr2O3 scale, alumina, protective scale, additive manufacturing
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.