The DOI matches its Crossref record; 93 of the 98 references it cites were found in a registry or an index.
Influence of thermal post treatments on microstructure and oxidation behavior of EB-PBF manufactured Alloy 718
Abstract
The effect of thermal post treatments consisting of heat treatment (HT), hot isostatic pressing (HIP), and combined HIP-HT on microstructure and oxidation behavior of Alloy 718 manufactured by electron beam powder bed fusion (EB-PBF) technique was investigated. Oxidation of the as-built and post-treated specimens was performed in ambient air at 650, 750, and 850 °C for up to 168 h. Directional columnar-grained microstructure, pores and fine Nb-rich carbides were observed in the as-built specimen. The HT specimen presented the columnar microstructure, plate-like δ phase at grain boundaries, and pores. The dominant grain crystallographic orientation was changed from 〈001〉 in the as-built specimen to 〈101〉 after HT. No grain boundary δ phase was observed in the HIPed specimen, but recrystallization occurred in both the HIP and HIP-HT specimens due to a rapid cooling after HIPing motivating the nucleation of fine grains with limited time to grow. After oxidation exposure at 650 and 750 °C for 168 h, no big difference between weight changes of the as-built and post-treated specimens was noted, whereas at 850 °C, the combined HIP-HT specimen showed the most promising corrosion resistance with the least weight change. At 850 °C, a protective scale of Cr2O3 rich in Cr, Ti, and Ni as well as an internal oxide (branched structure of alumina) developed in all the specimens, while, only a protective Cr2O3 scale was found at 650 and 750 °C. The HIP-HT specimen at 850 °C developed an oxide scale, which was denser and more adherent in comparison to the oxide scales formed on the other three specimens, associated with its limited defect distribution and more homogenized microstructure. Moreover, the δ phase formed close to the surface of the exposed specimens during the oxidation exposure at 850 °C most probably led to nucleation and growth of the oxide scale.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“EB-PBF operates in a vacuum [145], which is particularly well-suited for applications in space environments.”
From A comprehensive review of lunar-based manufacturing and construction (2024) · cites this paper as [145]
In the citing paper
“The use of an electron beam source for in-space manufacturing will be limited to additive manufacturing of metals, with wire or powder feedstock [145,146,307].”
From A comprehensive review of lunar-based manufacturing and construction (2024) · cites this paper as [145]
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Residual stresses in selective laser sintering and selective laser melting
Mercelis, P., & Kruth, J. (2006) · Rapid Prototyping Journal · doi:10.1108/13552540610707013 · Cited by 2,015
Metal Additive Manufacturing: A Review of Mechanical Properties
Lewandowski, J. J., & Seifi, M. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032024 · Cited by 1,722
Self-citationCarroll, B. E., Palmer, T. A., & Beese, A. M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.12.054 · Cited by 1,507
Jia, Q., & Gu, D. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.09.171 · Cited by 905
Chlebus, E., Gruber, K., Kuźnicka, B., Kurzac, J., & Kurzynowski, T. (2015) · Materials Science and Engineering A · doi:10.1016/j.msea.2015.05.035 · Cited by 787
Zhang, D., Niu, W., Cao, X., & Liu, Z. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.06.021 · Cited by 723
Tucho, W. M., Cuvillier, P., Sjolyst-Kverneland, A., & Hansen, V. F. (2017) · Materials Science and Engineering A · doi:10.1016/j.msea.2017.02.062 · Cited by 682
Shaigan, N., Qu, W., Ivey, D. G., & Chen, W. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.09.069 · Cited by 656
Overview of Materials Qualification Needs for Metal Additive Manufacturing
Seifi, M., Salem, A., Beuth, J., Harrysson, O., & Lewandowski, J. J. (2016) · JOM · doi:10.1007/s11837-015-1810-0 · Cited by 630
Self-citationUsing JMatPro to model materials properties and behavior
Saunders, N., Guo, U. K. Z., Li, X., Miodownik, A. P., & Schillé, J.-P. (2003) · JOM · doi:10.1007/s11837-003-0013-2 · Cited by 613
Tammas-Williams, S., Zhao, H., Léonard, F., Derguti, F., Todd, I., & Prangnell, P. B. (2015) · Materials Characterization · doi:10.1016/j.matchar.2015.02.008 · Cited by 590
Popovich, V., Borisov, E. V., Popovich, A., Sufiiarov, V. S., Masaylo, D. V., & Alzina, L. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.10.075 · Cited by 580
Delta phase precipitation in Inconel 718
Azadian, S., Wei, L., & Warrén, R. (2004) · Materials Characterization · doi:10.1016/j.matchar.2004.07.004 · Cited by 578
Dehoff, R. R., Kirka, M. M., Sames, W. J., Bilheux, H., Tremsin, A. S., Lowe, L. E., & Babu, S. S. (2015) · Materials Science and Technology · doi:10.1179/1743284714y.0000000734 · Cited by 555
Murr, L. E., Martinez, E., Amato, K. N., Gaytan, S. M., Hernandez, J., Ramirez, D. A., Shindo, P. W., Medina, F., & Wicker, R. B. (2012) · Journal of Materials Research and Technology · doi:10.1016/s2238-7854(12)70009-1 · Cited by 470
Seifi, M., Gorelik, M., Waller, J., Hrabe, N., Shamsaei, N., Daniewicz, S., & Lewandowski, J. J. (2017) · JOM · doi:10.1007/s11837-017-2265-2 · Cited by 422
Self-citationHigh-Temperature Corrosion and Materials Applications
Lai, G. Y. (2007) · ASM International eBooks · doi:10.31399/asm.tb.htcma.9781627083041 · Cited by 407
Popovich, V., Borisov, E. V., Popovich, A., Sufiiarov, V. S., Masaylo, D. V., & Alzina, L. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.05.065 · Cited by 399
Introduction to High Temperature Oxidation and Corrosion
Khanna, A. S. (2002) · Cited by 364
Hrabe, N., Gnäupel-Herold, T., & Quinn, T. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.04.022 · Cited by 355
Additive Manufacturing for the Aerospace Industry
(2019) · Elsevier eBooks · doi:10.1016/c2017-0-00712-7 · Cited by 331
Kolbus, L. M., Payzant, E. A., Cornwell, P., Watkins, T. R., Babu, S. S., Dehoff, R., Lorenz, M., Ovchinnikova, O. S., & Duty, C. (2015) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-014-2722-2 · Cited by 302
Seifi, M., Salem, A. A., Satko, D. P., Shaffer, J., & Lewandowski, J. J. (2016) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.06.001 · Cited by 291
Self-citationZhang, F., Levine, L. E., Allen, A. J., Stoudt, M. R., Lindwall, G., Lass, E. A., Williams, M. E., Idell, Y., & Campbell, C. E. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.03.017 · Cited by 291
Tammas-Williams, S., Withers, P. J., Todd, I., & Prangnell, P. B. (2016) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.05.002 · Cited by 288
Feedstock powder processing research needs for additive manufacturing development
Anderson, I. E., White, E. M. H., & Dehoff, R. (2018) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2018.01.002 · Cited by 286
Tammas-Williams, S., Withers, P. J., Todd, I., & Prangnell, P. B. (2016) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-016-3429-3 · Cited by 269
Aydinöz, M. E., Brenne, F., Schaper, M., Schaak, C., Tillmann, W., Nellesen, J., & Niendorf, T. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2016.05.089 · Cited by 265
Jia, Q., & Gu, D. (2014) · Optics & Laser Technology · doi:10.1016/j.optlastec.2014.03.008 · Cited by 260
On the high-temperature oxidation of nickel
Haugsrud, R. (2002) · Corrosion Science · doi:10.1016/s0010-938x(02)00085-9 · Cited by 254
Metallurgy of additive manufacturing: Examples from electron beam melting
Murr, L. E. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2014.12.002 · Cited by 247
Mostafa, A. O., Rubio, I. P., Braïlovski, V., Jahazi, M., & Medraj, M. (2017) · Metals · doi:10.3390/met7060196 · Cited by 247
Oxidation behavior of several chromia-forming commercial nickel-base superalloys
Chen, J. H., Rogers, P. M., & Little, J. A. (1997) · Oxidation of Metals · doi:10.1007/bf02134783 · Cited by 236
Materials Science and Technology: A Comprehensive Treatment
(2007) · Wiley eBooks · doi:10.1002/9783527603978 · Cited by 231
Growth and adherence of chromia based surface scales on Ni-base alloys in high- and low-pO2 gases
Zurek, J., Young, D. J., Essuman, E., Hänsel, M., Penkalla, H. J., Niewolak, L., & Quadakkers, W. J. (2008) · Materials Science and Engineering: A · doi:10.1016/j.msea.2007.05.035 · Cited by 223
Xia, M., Gu, D., Yu, G., Dai, D., Chen, H., & Shi, Q. (2016) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2016.07.010 · Cited by 220
Deng, D., Moverare, J., Peng, R. L., & Söderberg, H. (2017) · Materials Science and Engineering: A · doi:10.1016/j.msea.2017.03.085 · Cited by 220
Chromia layer growth on a Ni-based superalloy: Sub-parabolic kinetics and the role of titanium
Cruchley, S., Evans, H. E., Taylor, M. P., Hardy, M. C., & Stekovic, S. (2013) · Corrosion Science · doi:10.1016/j.corsci.2013.05.016 · Cited by 217
Kuo, Y.-L., Horikawa, S., & Kakehi, K. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.12.026 · Cited by 200
Initial oxidation and chromium diffusion. I. Effects of surface working on 9–20% Cr steels
Ostwald, C., & Grabke, H. J. (2003) · Corrosion Science · doi:10.1016/j.corsci.2003.09.004 · Cited by 199
Song, B., Dong, S., Liu, Q., Liao, H., & Coddet, C. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.08.085 · Cited by 189
Thermal Modeling of Electron Beam Additive Manufacturing Process: Powder Sintering Effects
Shen, N., & Chou, K. (2012) · ASME International Manufacturing Science and Engineering Conference (MSEC) · doi:10.1115/msec2012-7253 · Cited by 171
Schneider, J. A., Lund, B., & Fullen, M. D. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.03.005 · Cited by 171
Dissolution kinetics of δ phase and its influence on the notch sensitivity of Inconel 718
Cai, D., Zhang, W., Nie, P., Liu, W. C., & Mei, Y. (2006) · Materials Characterization · doi:10.1016/j.matchar.2006.04.020 · Cited by 164
The Physical Metallurgy of Cast and Wrought Alloy 718
Radavich, J. F. (2004) · doi:10.7449/1989/superalloys_1989_229_240 · Cited by 162
Agnoli, A., Bernacki, M., Logé, R. E., Franchet, J., Laigo, J., & Bozzolo, N. (2015) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-015-3035-9 · Cited by 159
Kirka, M. M., Medina, F., Dehoff, R., & Okello, A. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2016.10.069 · Cited by 157
Strondl, A., Palm, M., Gnauk, J., & Frommeyer, G. (2009) · Materials Science and Technology · doi:10.1179/026708309x12468927349451 · Cited by 156
Laser powder-bed fusion of Inconel 718 to manufacture turbine blades
Caiazzo, F., Alfieri, V., Corrado, G., & Argenio, P. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-0839-3 · Cited by 154
Seifi, M., Salem, A. A., Satko, D. P., Ackelid, U., Semiatin, S. L., & Lewandowski, J. J. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.09.163 · Cited by 150
Self-citationYuan, K., Guo, W., Li, P., Wang, J., Su, Y., Lin, X., & Li, Y. (2018) · Materials Science and Engineering A · doi:10.1016/j.msea.2018.02.014 · Cited by 148
Hernández-Nava, E., Smith, C. J., Derguti, F., Tammas‐Williams, S., Léonard, F., Withers, P. J., Todd, I., & Goodall, R. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.029 · Cited by 146
Recyclability Study on Inconel 718 and Ti-6Al-4V Powders for Use in Electron Beam Melting
Nandwana, P., Peter, W. H., Dehoff, R., Lowe, L. E., Kirka, M. M., Medina, F. R., & Babu, S. S. (2015) · Metallurgical and Materials Transactions B · doi:10.1007/s11663-015-0477-9 · Cited by 142
Cyclic Oxidation Behavior of IN 718 Superalloy in Air at High Temperatures
Al-hatab, K. A., Al-Bukhaiti, M. A., Krupp, U., & Kantehm, M. (2010) · Oxidation of Metals · doi:10.1007/s11085-010-9230-6 · Cited by 137
Wang, X., & Chou, K. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.08.016 · Cited by 117
Qualification and certification of metal additive manufactured hardware for aerospace applications
Russell, R., Wells, D., Waller, J., Poorganji, B., Ott, E., Nakagawa, T., Sandoval, H., Shamsaei, N., & Seifi, M. (2019) · Additive Manufacturing for the Aerospace Industry · doi:10.1016/b978-0-12-814062-8.00003-0 · Cited by 97
Self-citationDefects and 3D structural inhomogeneity in electron beam additively manufactured Inconel 718
Polonsky, A. T., Echlin, M. P., Lenthe, W. C., Dehoff, R., Kirka, M. M., & Pollock, T. M. (2018) · Materials Characterization · doi:10.1016/j.matchar.2018.02.020 · Cited by 95
Ruttert, B., Ramsperger, M., Roncery, L. M., Lopez‐Galilea, I., Körner, C., & Theisen, W. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.08.041 · Cited by 87
Grain boundary precipitation in Inconel 718 and ATI 718Plus
Hassan, B., & Corney, J. (2017) · Materials Science and Technology · doi:10.1080/02670836.2017.1333222 · Cited by 83
Larker, H. T., & Larker, R. (2006) · Materials Science and Technology · doi:10.1002/9783527603978.mst0201 · Cited by 82
Metal Powder for Additive Manufacturing
Qian, M. (2015) · JOM · doi:10.1007/s11837-015-1321-z · Cited by 82
Sames, W. J., Unocic, K. A., Helmreich, G. W., Kirka, M. M., Medina, F. R., Dehoff, R., & Babu, S. S. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.09.001 · Cited by 81
A methodology for precision additive manufacturing through compensation
Afazov, S. M., Okioga, A., Holloway, A., Denmark, W., Triantaphyllou, A., Smith, S.-A., & Bradley-Smith, L. (2017) · Precision Engineering · doi:10.1016/j.precisioneng.2017.05.014 · Cited by 76
High-temperature deformation of delta-processed Inconel 718
Páramo-Kañetas, P. J., Özturk, U., Calvo, J., Cabrera, J.-M., & Guerrero‐Mata, M. P. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.12.014 · Cited by 76
Latu-Romain, L., Parsa, Y., Mathieu, S., Vilasi, M., Galerie, A., & Wouters, Y. (2017) · Corrosion Science · doi:10.1016/j.corsci.2017.07.005 · Cited by 71
Brandão, A. D., Gerard, R., Gumpinger, J., Beretta, S., Makaya, A., Pambaguian, L., & Ghidini, T. (2017) · Materials · doi:10.3390/ma10050522 · Cited by 69
High-temperature oxidation performance of a new alumina-forming Ni–Fe–Cr–Al alloy in flowing air
Deodeshmukh, V. P., Matthews, S. J., & Klarstrom, D. L. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2010.04.099 · Cited by 66
The oxidation characteristics of the nickel-based superalloy, RR1000, at temperatures of 700–900°C
Taylor, M. P., Evans, H. E., Stekovic, S., & Hardy, M. (2012) · Materials at High Temperatures · doi:10.3184/096034012x13341417107382 · Cited by 65
Tensile deformation behaviour of forged disc of IN 718 superalloy at 650°C
Prasad, K., Sarkar, R., Ghosal, P., & Kumar, V. (2010) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2010.04.019 · Cited by 63
Sames, W. J. (2015) · Cited by 60
Guo, R., Xu, L., Zong, Y., & Yang, R. (2017) · Acta Metallurgica Sinica (English Letters) · doi:10.1007/s40195-017-0540-4 · Cited by 60
Karimi, P., Raza, T., Andersson, J., & Svensson, L.-E. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-1019-1 · Cited by 60
Self-citationElectron beam melting of Inconel 718: Effects of processing and post-processing
Nandwana, P., Kirka, M. M., Okello, A., & Dehoff, R. (2018) · Materials Science and Technology · doi:10.1080/02670836.2018.1424379 · Cited by 59
An XAS study of the defect structure of Ti-doped α-Cr2O3
Blacklocks, A. N., Atkinson, A., Packer, R. J., Savin, S. L. P., & Chadwick, A. V. (2006) · Solid State Ionics · doi:10.1016/j.ssi.2006.08.028 · Cited by 57
Microstructure and morphology of high temperature oxidation in superalloys
Khalid, F. A., Hussain, N., & Shahid, K. A. (1999) · Materials Science and Engineering A · doi:10.1016/s0921-5093(98)01181-2 · Cited by 56
Influence of grain orientation on the incipient oxidation behavior of Haynes 230 at 900 °C
Wang, X., Fan, F., Szpunar, J. A., & Zhang, L. (2015) · Materials Characterization · doi:10.1016/j.matchar.2015.06.029 · Cited by 55
High-temperature oxidation of FGH96 P/M superalloy
LIU, F., Zhang, M., DONG, J., & Na, Z. (2007) · Acta Metallurgica Sinica (English Letters) · doi:10.1016/s1006-7191(07)60014-3 · Cited by 53
Quantitative interpretation of the parabolic and nonparabolic oxidation behavior of nitride ceramic
Hou, X., & Chou, K. C. (2008) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2008.06.015 · Cited by 51
Sudbrack, C. K., Draper, S. L., Gorman, T. T., Telesman, J., Gabb, T. P., & Hull, D. R. (2012) · doi:10.1002/9781118516430.ch95 · Cited by 44
Páramo-Kañetas, P. J., Osorio, L. A. R., Guerrero‐Mata, M. P., Garza, M. D. L. G., & López, V. P. (2015) · Procedia Materials Science · doi:10.1016/j.mspro.2015.04.180 · Cited by 39
Understanding and Modeling of Grain Boundary Pinning in Inconel 718
Agnoli, A., Bernacki, M., Logé, R. E., Franchet, J., Laigo, J., & Bozzolo, N. (2012) · doi:10.1002/9781118516430.ch8 · Cited by 39
Deleume, J., Cloué, J., & Andrieu, É. (2008) · Journal of Nuclear Materials · doi:10.1016/j.jnucmat.2008.09.018 · Cited by 37
High-Temperature Oxidation Resistance of Austenitic Stainless Steel Cr18Ni11Cu3Al3MnNb
Li, D., Dai, Q., Cheng, X.-N., Wang, R., & Huang, Y. (2012) · Journal of Iron and Steel Research International · doi:10.1016/s1006-706x(12)60103-4 · Cited by 34
Rabbani, F., Ward, L. P., & Strafford, K. N. (2000) · Oxidation of Metals · doi:10.1023/a:1004658814608 · Cited by 32
A Microstructural Study of Preferential Oxidation at the Grain Boundaries of Ni–Cr Alloys
Ul‐Hamid, A. (2002) · Oxidation of Metals · doi:10.1023/a:1014818117073 · Cited by 31
Sufiiarov, V. S., Popovich, A., Borisov, E. V., & Анатольевич, П. И. (2016) · Nonferrous Metals · doi:10.17580/tsm.2016.01.14 · Cited by 19
Effects of Post-processing on Microstructure and Mechanical Properties of SLM-Processed IN-718
Seifi, M., Salem, A. A., Satko, D. P., Grylls, R., & Lewandowski, J. J. (2018) · The minerals, metals & materials series · doi:10.1007/978-3-319-89480-5_33 · Cited by 16
Self-citationInfluence of Al and Nb on castability of a Ni-base superalloy, IN713LC
Kantor, B., Mason, C., D’Souza, N., Dong, H., & Green, N. R. (2009) · International Journal of Cast Metals Research · doi:10.1179/136404609x367344 · Cited by 14
High-Temperature Oxidation Resistance of Austenitic Stainless Steel Crl8Nil 1Cu3Al3MnNb
Li, Dongsheng, Dai, Qi-xun, Cheng, Xiaonong, Wang, Rongrong, Huang, & yan, Y. (2012) · Acta Scientiarum Naturalium Universitatis Sunyatseni · Cited by 12
Kreitcberg, A., Braïlovski, V., Turenne, S., Chanal, C., & Urlea, V. (2016) · Materials science forum · doi:10.4028/www.scientific.net/msf.879.1008 · Cited by 8
Porosity Removal of CM247 Ni-base Superalloy using Thermal Heat Treatment without Applied Pressure
Heinrich, C. (2015) · Journal of International Crisis and Risk Communication Research · Cited by 1
Cited by
Heat treatment for metal additive manufacturing
Laleh, M., Sadeghi, E., Revilla, R. I., Chao, Q., Haghdadi, N., Hughes, A. E., Xu, W., De Graeve, I., Qian, M., Gibson, I., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101051 · Cited by 538
Self-citationDefects and anomalies in powder bed fusion metal additive manufacturing
Mostafaei, A., Zhao, C., He, Y., Reza Ghiaasiaan, S., Shi, B., Shao, S., Shamsaei, N., Wu, Z., Kouraytem, N., Sun, T., et al. (2022) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2021.100974 · Cited by 491
Al-Maharma, A. Y., Patil, S. P., & Markert, B. (2020) · Materials Research Express · doi:10.1088/2053-1591/abcc5d · Cited by 404
Wang, H., Dhiman, A., Ostergaard, H. E., Zhang, Y., Siegmund, T. H., Kruzic, J. J., & Tomar, V. (2019) · International Journal of Plasticity · doi:10.1016/j.ijplas.2019.04.018 · Cited by 116
Haines, M. P., Rielli, V. V., Primig, S., & Haghdadi, N. (2022) · Journal of Materials Science · doi:10.1007/s10853-022-07501-4 · Cited by 126
Metadata
- Authors
- Sadeghi, E., Karimi, P., Momeni, S., Seifi, M., Eklund, A., & Andersson, J.
- Affiliations
- University West (SE)
- Friedrich-Alexander-Universität Erlangen-Nürnberg (DE)
- American Society For Testing and Materials (US)
- Quintus Technologies (Sweden) (SE)
- Corresponding author
- Sadeghi, Esmaeil
- Venue
- Materials Characterization
- Publisher
- Elsevier BV
- Published
- 2019-04
- Volume
- 150
- Pages
- 236-251
- ISSN
- 1044-5803 (ISSN-L)
- OpenAlex
- W2913634436
- Cited by
- 74
- References
- 98
- Citations by year
- 2026: 21 · 2025: 12 · 2024: 12 · 2023: 4 · 2022: 11 · 2021: 2 · 2020: 9 · 2019: 3
- FWCI
- 3.52
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- Locations
- Materials Characterization (publishedVersion)
- Funders
- Knowledge Foundation
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Additive Manufacturing Materials and Processes
- Physical Sciences › Engineering › Mechanical Engineering › High Temperature Alloys and Creep
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › High-Temperature Coating Behaviors
- Keywords
- Inconel 718, electron beam melting, post-heat treatment, hot isostatic pressing, heat treatment, oxidation behavior, high-temperature corrosion, microstructure, columnar grains, delta phase, recrystallization, grain orientation, oxide scale, Cr2O3 scale, alumina, protective scale, additive manufacturing
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.