Adsorption removal of methylene blue onto activated carbon/cellulose biocomposite films: Equilibrium and kinetic studies
The DOI matches its Crossref record; 68 of the 68 references it cites were found in a registry or an index.
Abstract
Abstract Activated carbon/cellulose composite (ACC) biosorbent films were fabricated via solution casting by combining 1–3% w/v of activated carbon with the cellulose solution which dissolved by lithium chloride/N, N-dimethylacetamide. Both cellulose solution and activated carbon were prepared from sisal fiber. These films were characterized by scanning electron microscope (SEM), Fourier transform infrared spectroscope (FTIR), thermogravimetric analyzer (TGA), and X-ray Diffractometer (XRD). The specific surface area of activated carbon was found to be 1165 m2/g. The maximum methylene blue adsorption capacity of the ACC film reached 103.66 mg/g with the dye concentration of 100 mg/L, solution pH of 6.9, at 35○C for 24 h. The adsorption data suggested that the isotherm model for the equilibrium process was that of Langmuir model, and the adsorption kinetic was best described by pseudo-second-order model. The effect of initial dye concentration (20–100 mg/L), contact time (0–2,880 min), pH (3–11), and temperature (35–80○C) on adsorption capacity of ACC3 film were also examined. Thermodynamics studies of ACC3 film revealed that the adsorption process was endothermic, spontaneous, and feasible. Therefore, the activated carbon/cellulose composite films can be potentially used as biosorbents to remove dyes from contaminated water.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biochar as a sorbent for contaminant management in soil and water: A review
Ahmad, M., Rajapaksha, A. U., Lim, J. E., Zhang, M., Bolan, N., Mohan, D., Vithanage, M., Lee, S. S., & Ok, Y. S. (2014) · Chemosphere · doi:10.1016/j.chemosphere.2013.10.071 · Cited by 4,662
Tran, H. N., You, S.-J., Hosseini-Bandegharaei, A., & Chao, H.-P. (2017) · Water Research · doi:10.1016/j.watres.2017.04.014 · Cited by 2,902
Kan, T., Strezov, V., & Evans, T. J. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.185 · Cited by 2,239
A.O, D. (2012) · IOSR Journal of Applied Chemistry · doi:10.9790/5736-0313845 · Cited by 1,934
Effect of process parameters on production of biochar from biomass waste through pyrolysis: A review
Tripathi, M., Sahu, J. N., & Ganesan, P. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.122 · Cited by 1,759
Low cost adsorbents for the removal of organic pollutants from wastewater
Ali, I., Asim, M., & Khan, T. A. (2012) · Journal of Environmental Management · doi:10.1016/j.jenvman.2012.08.028 · Cited by 1,498
Saravanan, R., Karthikeyan, S., Gupta, V. K., Sekaran, G., Narayanan, V., & Stephen, A. (2013) · Materials Science and Engineering: C · doi:10.1016/j.msec.2012.08.011 · Cited by 1,054
Saleh, T. A., & Gupta, V. K. (2012) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2011.12.038 · Cited by 962
Rice Husk and Its Ash as Low-Cost Adsorbents in Water and Wastewater Treatment
Ahmaruzzaman, M., & Gupta, V. K. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie201477c · Cited by 872
Removal and recovery of Chrysoidine Y from aqueous solutions by waste materials
Mittal, A., Mittal, J., Malviya, A., & Gupta, V. K. (2010) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2010.01.007 · Cited by 859
Cited by
Rápó, E., & Tonk, S. (2021) · Molecules · doi:10.3390/molecules26175419 · Cited by 490
Bhatti, H. N., Safa, Y., Yakout, S. M., Shair, O. H., Iqbal, M., & Nazir, A. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.02.093 · Cited by 303
Adsorption of methylene blue onto chitosan–montmorillonite/polyaniline nanocomposite
Minisy, I. M., Salahuddin, N. A., & Ayad, M. M. (2021) · Applied Clay Science · doi:10.1016/j.clay.2021.105993 · Cited by 290
Yağmur, H. K., & Kaya, İ. (2021) · Journal of Molecular Structure · doi:10.1016/j.molstruc.2021.130071 · Cited by 263
Adedeji, O. M., & Jahan, K. (2023) · Chemosphere · doi:10.1016/j.chemosphere.2023.138165 · Cited by 91
Sustainable Nanomaterials in Wastewater Remediation
Mitra, A. K., & Nayak, S. (2025) · Advances in Wastewater Research · doi:10.1007/978-981-96-3908-3_7 · Cited by 4
Metadata
- Authors
- Somsesta, N., Sricharoenchaikul, V., & Aht-Ong, D.
- Venue
- Materials Chemistry and Physics
- Publisher
- Elsevier BV
- Published
- 2020-01
- Volume
- 240
- Pages
- 122221
- ISSN
- 0254-0584 (ISSN-L)
- OpenAlex
- W2977134328
- Cited by
- 317
- References
- 68
- FWCI
- 14.26
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.