The DOI matches its Crossref record; 68 of the 68 references it cites were found in a registry or an index.
Adsorption removal of methylene blue onto activated carbon/cellulose biocomposite films: Equilibrium and kinetic studies
Abstract
Abstract Activated carbon/cellulose composite (ACC) biosorbent films were fabricated via solution casting by combining 1–3% w/v of activated carbon with the cellulose solution which dissolved by lithium chloride/N, N-dimethylacetamide. Both cellulose solution and activated carbon were prepared from sisal fiber. These films were characterized by scanning electron microscope (SEM), Fourier transform infrared spectroscope (FTIR), thermogravimetric analyzer (TGA), and X-ray Diffractometer (XRD). The specific surface area of activated carbon was found to be 1165 m2/g. The maximum methylene blue adsorption capacity of the ACC film reached 103.66 mg/g with the dye concentration of 100 mg/L, solution pH of 6.9, at 35○C for 24 h. The adsorption data suggested that the isotherm model for the equilibrium process was that of Langmuir model, and the adsorption kinetic was best described by pseudo-second-order model. The effect of initial dye concentration (20–100 mg/L), contact time (0–2,880 min), pH (3–11), and temperature (35–80○C) on adsorption capacity of ACC3 film were also examined. Thermodynamics studies of ACC3 film revealed that the adsorption process was endothermic, spontaneous, and feasible. Therefore, the activated carbon/cellulose composite films can be potentially used as biosorbents to remove dyes from contaminated water.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biochar as a sorbent for contaminant management in soil and water: A review
Ahmad, M., Rajapaksha, A. U., Lim, J. E., Zhang, M., Bolan, N., Mohan, D., Vithanage, M., Lee, S. S., & Ok, Y. S. (2014) · Chemosphere · doi:10.1016/j.chemosphere.2013.10.071 · Cited by 4,662
Tran, H. N., You, S.-J., Hosseini-Bandegharaei, A., & Chao, H.-P. (2017) · Water Research · doi:10.1016/j.watres.2017.04.014 · Cited by 2,902
Kan, T., Strezov, V., & Evans, T. J. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.185 · Cited by 2,239
A.O, D. (2012) · IOSR Journal of Applied Chemistry · doi:10.9790/5736-0313845 · Cited by 1,934
Effect of process parameters on production of biochar from biomass waste through pyrolysis: A review
Tripathi, M., Sahu, J. N., & Ganesan, P. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.122 · Cited by 1,759
Low cost adsorbents for the removal of organic pollutants from wastewater
Ali, I., Asim, M., & Khan, T. A. (2012) · Journal of Environmental Management · doi:10.1016/j.jenvman.2012.08.028 · Cited by 1,498
Saravanan, R., Karthikeyan, S., Gupta, V. K., Sekaran, G., Narayanan, V., & Stephen, A. (2013) · Materials Science and Engineering: C · doi:10.1016/j.msec.2012.08.011 · Cited by 1,054
Saleh, T. A., & Gupta, V. K. (2012) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2011.12.038 · Cited by 962
Rice Husk and Its Ash as Low-Cost Adsorbents in Water and Wastewater Treatment
Ahmaruzzaman, M., & Gupta, V. K. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie201477c · Cited by 872
Removal and recovery of Chrysoidine Y from aqueous solutions by waste materials
Mittal, A., Mittal, J., Malviya, A., & Gupta, V. K. (2010) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2010.01.007 · Cited by 859
Mohammadi, N., Khani, H., Gupta, V. K., Amereh, E., & Agarwal, S. (2011) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2011.06.067 · Cited by 818
Conducting PANI stimulated ZnO system for visible light photocatalytic degradation of coloured dyes
Saravanan, R., Sacari, E., Gracia, F., Khan, M. M., Mosquera, E., & Gupta, V. K. (2016) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2016.06.074 · Cited by 688
Reaction mechanisms and multi-scale modelling of lignocellulosic biomass pyrolysis
Anca-Couce, A. (2016) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2015.10.002 · Cited by 664
Biochar production by sewage sludge pyrolysis
Agrafioti, E., Bouras, G., Kalderis, D., & Diamadopoulos, E. (2013) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2013.02.010 · Cited by 650
Saravanan, R., Mansoob Khan, M., Gupta, V. K., Mosquera, E., Gracia, F., Narayanan, V., & Stephen, A. (2015) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2015.04.035 · Cited by 635
Comparison of biochar properties from biomass residues produced by slow pyrolysis at 500°C
Lee, Y., Park, J., Ryu, C., Gang, K. S., Yang, W., Park, Y.-K., Jung, J., & Hyun, S. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2013.08.135 · Cited by 624
Characteristics of biochar and its application in remediation of contaminated soil
Tang, J., Zhu, W., Kookana, R., & Katayama, A. (2013) · Journal of Bioscience and Bioengineering · doi:10.1016/j.jbiosc.2013.05.035 · Cited by 604
Inyang, M., & Dickenson, E. (2015) · Chemosphere · doi:10.1016/j.chemosphere.2015.03.072 · Cited by 601
Adsorption Removal of Dyes from Single and Binary Solutions Using a Cellulose-based Bioadsorbent
Liu, L., Gao, Z. Y., Su, X. P., Chen, X., Jiang, L., & Yao, J. M. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc500848m · Cited by 580
Saravanan, R., Karthikeyan, N., Gupta, V. K., Thirumal, E., Thangadurai, P., Narayanan, V., & Stephen, A. (2013) · Materials Science and Engineering: C · doi:10.1016/j.msec.2013.01.046 · Cited by 578
Liou, T.-H. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.12.016 · Cited by 545
Saleh, T. A., & Gupta, V. K. (2012) · Separation and Purification Technology · doi:10.1016/j.seppur.2012.01.039 · Cited by 538
Ghorai, S., Sarkar, A., Raoufi, M., Panda, A. B., Schönherr, H., & Pal, S. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am4055657 · Cited by 529
Carcinogenicity of azo colorants: influence of solubility and bioavailability
Golka, K., Kopps, S., & Myslak, Z. W. (2004) · Toxicology Letters · doi:10.1016/j.toxlet.2003.11.016 · Cited by 464
Gupta, V. K., Nayak, A., Agarwal, S., & Tyagi, I. (2014) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2013.11.067 · Cited by 455
Zhu, H.-Y., Fu, Y.-Q., Jiang, R., Jiang, J.-H., Xiao, L., Zeng, G.-M., Zhao, S.-L., & Wang, Y. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.08.020 · Cited by 439
Modified bentonite adsorption of organic pollutants of dye wastewater
Huang, Z., Li, Y., Chen, W., Shi, J., Zhang, N., Wang, X., Li, Z., Gao, L., & Zhang, Y. (2017) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2017.09.028 · Cited by 392
Shen, Y. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.11.061 · Cited by 387
Muniandy, L., Adam, F., Mohamed, A. R., & Ng, E.-P. (2014) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2014.06.020 · Cited by 383
Visible light degradation of textile effluent using novel catalyst ZnO/γ-Mn2O3
Saravanan, R., Gupta, V. K., Narayanan, V., & Stephen, A. (2014) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2013.12.021 · Cited by 362
Ghaderi, M., Mousavi, M., Yousefi, H., & Labbafi, M. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.01.013 · Cited by 329
High effective adsorption of organic dyes on magnetic cellulose beads entrapping activated carbon
Luo, X., & Zhang, L. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.06.009 · Cited by 328
Angın, D., Altintig, E., & Köse, T. E. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2013.08.164 · Cited by 312
Preparation of high adsorption capacity bio-chars from waste biomass
Liu, W.-J., Zeng, F.-X., Jiang, H., & Zhang, X.-S. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2011.06.014 · Cited by 307
Chromium(VI) removal from aqueous system using Helianthus annuus (sunflower) stem waste
Jain, M., Garg, V. K., & Kadirvelu, K. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.05.048 · Cited by 288
Biochar from oil palm biomass: A review of its potential and challenges
Kong, S.-H., Loh, S.-K., Bachmann, R. T., Rahim, S. A., & Salimon, J. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.07.107 · Cited by 286
Alkali treated Ti3C2Tx MXenes and their dye adsorption performance
Wei, Z., Peigen, Z., Wubian, T., Xia, Q., Yamei, Z., & ZhengMing, S. (2018) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2017.12.034 · Cited by 262
Abdelhafez, A. A., & Li, J. (2016) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2016.01.005 · Cited by 260
Melo, B. C., Paulino, F. A. A., Cardoso, V. A., Pereira, A. G. B., Fajardo, A. R., & Rodrigues, F. H. A. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.10.079 · Cited by 247
Altintig, E., Onaran, M., Sarı, A., Altundag, H., & Tuzen, M. (2018) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2018.05.077 · Cited by 221
Tong, D. S., Wu, C. W., Adebajo, M. O., Jin, G. C., Yu, W. H., Ji, S. F., & Zhou, C. H. (2018) · Applied Clay Science · doi:10.1016/j.clay.2018.02.017 · Cited by 208
Removal of Chromium(VI) from aqueous solution using guar gum–nano zinc oxide biocomposite adsorbent
Khan, T. A., Nazir, M., Ali, I., & Kumar, A. (2017) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2013.08.019 · Cited by 207
Franciski, M. A., Peres, E. C., Godinho, M., Perondi, D., Foletto, E. L., Collazzo, G. C., & Dotto, G. L. (2018) · Waste Management · doi:10.1016/j.wasman.2018.06.040 · Cited by 203
CELLULOSIC SUBSTRATES FOR REMOVAL OF POLLUTANTS FROM AQUEOUS SYSTEMS: A REVIEW. 2. DYES
Hubbe, M. A., Beck, K. R., O'Neal, W. G., & Sharma, Y. C. (2012) · BioResources · doi:10.15376/biores.7.2.2592-2687 · Cited by 199
All-cellulose composites by surface selective dissolution of aligned ligno-cellulosic fibres
SOYKEABKAEW, N., ARIMOTO, N., NISHINO, T., & PEIJS, T. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.03.023 · Cited by 193
Effect of a magnetic field on the adsorptive removal of methylene blue onto wheat straw biochar
Li, G., Zhu, W., Zhang, C., Zhang, S., Liu, L., Zhu, L., & Zhao, W. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2015.12.087 · Cited by 186
Igwe, J. C., & Abia, A. A. (2007) · Eclética Química · doi:10.1590/s0100-46702007000100005 · Cited by 182
Deveci, H., & Kar, Y. (2013) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2012.08.001 · Cited by 167
Removal of anionic pollutants from liquids by biomass materials: A review
Xu, X., Gao, B., Jin, B., & Yue, Q. (2016) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2015.12.101 · Cited by 159
Arsenite removal from water by electro-coagulation on zinc–zinc and copper–copper electrodes
Ali, I., Asim, M., & Khan, T. A. (2013) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-012-0113-z · Cited by 158
Lu, C., Liu, C., & Rao, G. P. C. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.05.078 · Cited by 146
Kakavandi, B., Takdastan, A., Pourfadakari, S., Ahmadmoazzam, M., & Jorfi, S. (2018) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2018.11.027 · Cited by 136
Influence of fast pyrolysis conditions on yield and structural transformation of biomass chars
Trubetskaya, A., Jensen, P. A., Jensen, A. D., Steibel, M., Spliethoff, H., & Glarborg, P. (2015) · Fuel Processing Technology · doi:10.1016/j.fuproc.2015.08.034 · Cited by 123
Pyrolysis of wetland biomass waste: Potential for carbon sequestration and water remediation
Cui, X., Hao, H., He, Z. L., Stoffella, P. J., & Yang, X. (2016) · Journal of Environmental Management · doi:10.1016/j.jenvman.2016.02.049 · Cited by 121
Ahmadi, M., Niari, M. H., & Kakavandi, B. (2017) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2017.10.014 · Cited by 106
Rehman, A., & Park, S. (2019) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2019.08.015 · Cited by 87
Reinforcement of all-cellulose nanocomposite films using native cellulose nanofibrils
Zhao, J., He, X. C., Wang, Y., Zhang, W., Zhang, X., Zhang, X., Deng, Y., & Lu, C. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.01.007 · Cited by 85
Nakasone, K., Ikematsu, S., & Kobayashi, T. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b03926 · Cited by 84
Effect of fast pyrolysis conditions on biomass solid residues at high temperatures
Trubetskaya, A., Jensen, P. A., Jensen, A. D., Llamas, Á. D. G., Umeki, K., & Glarborg, P. (2015) · Fuel Processing Technology · doi:10.1016/j.fuproc.2015.11.002 · Cited by 81
Nestler, F., Burhenne, L., Amtenbrink, M. J., & Aicher, T. (2016) · Fuel Processing Technology · doi:10.1016/j.fuproc.2016.01.020 · Cited by 78
Adsorption behaviour of congo red by cellulose/chitosan hydrogel beads regenerated from ionic liquid
Li, M., Wang, Z., & Li, B. (2015) · Desalination and Water Treatment · doi:10.1080/19443994.2015.1082945 · Cited by 76
Kakavandi, B., Raofi, A., Peyghambarzadeh, S. M., Ramavandi, B., Niari, M. H., & Ahmadi, M. (2018) · Desalination and Water Treatment · doi:10.5004/dwt.2018.22238 · Cited by 69
Laskar, N., & Kumar, U. (2018) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-018-1760-5 · Cited by 64
Equilibrium studies of copper ion adsorption onto palm kernel fibre
Ofomaja, A. E. (2010) · Journal of Environmental Management · doi:10.1016/j.jenvman.2010.02.029 · Cited by 59
A sectional approach for biomass: Modelling the pyrolysis of cellulose
Lin, T., Goos, E., & Riedel, U. (2013) · Fuel Processing Technology · doi:10.1016/j.fuproc.2013.03.048 · Cited by 55
Seow, W. Y., & Hauser, C. A. E. (2016) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2016.02.013 · Cited by 55
Manyà, J. J., Roca, F. X., & Lorente, J. F. P. (2012) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2012.10.006 · Cited by 54
Orientation and deformation of wet-stretched all-cellulose nanocomposites
Pullawan, T., Wilkinson, A. N., & Eichhorn, S. J. (2013) · Journal of Materials Science · doi:10.1007/s10853-013-7404-8 · Cited by 30
Cited by
Rápó, E., & Tonk, S. (2021) · Molecules · doi:10.3390/molecules26175419 · Cited by 490
Bhatti, H. N., Safa, Y., Yakout, S. M., Shair, O. H., Iqbal, M., & Nazir, A. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.02.093 · Cited by 303
Adsorption of methylene blue onto chitosan–montmorillonite/polyaniline nanocomposite
Minisy, I. M., Salahuddin, N. A., & Ayad, M. M. (2021) · Applied Clay Science · doi:10.1016/j.clay.2021.105993 · Cited by 290
Yağmur, H. K., & Kaya, İ. (2021) · Journal of Molecular Structure · doi:10.1016/j.molstruc.2021.130071 · Cited by 263
Adedeji, O. M., & Jahan, K. (2023) · Chemosphere · doi:10.1016/j.chemosphere.2023.138165 · Cited by 91
Metadata
- Authors
- Somsesta, N., Sricharoenchaikul, V., & Aht-Ong, D.
- Venue
- Materials Chemistry and Physics
- Publisher
- Elsevier BV
- Published
- 2020-01
- Volume
- 240
- Pages
- 122221
- ISSN
- 0254-0584 (ISSN-L)
- OpenAlex
- W2977134328
- Cited by
- 317
- References
- 68
- FWCI
- 14.26
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.