The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Measurements of the mechanical response of unidirectional 3D-printed PLA
Open accessAbstract
Abstract Fully dense PLA blocks were manufactured by 3D-printing, depositing a polymer filament in a single direction via the fusion deposition method (FDM). Specimens were cut from printed blocks using conventional machining and were used to perform tension, compression and fracture experiments along different material directions. The elasto-plastic material response was found to be orthotropic and characterised by a strong tension-compression asymmetry; the material was tougher when loaded in the extrusion direction than in the transverse direction. The response of the unidirectional, 3D-printed material was compared to that of homogeneous injection-moulded PLA, showing that manufacturing by 3D-printing improves toughness; the effects of an annealing thermal cycle on the molecular structure and the mechanical response of the material were assessed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A theory of the yielding and plastic flow of anisotropic metals
Hill, R. (1948) · Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences · doi:10.1098/rspa.1948.0045 · Cited by 4,039
Anisotropic material properties of fused deposition modeling ABS
Ahn, S., Montero, M., Odell, D., Roundy, S., & Wright, P. K. (2002) · Rapid Prototyping Journal · doi:10.1108/13552540210441166 · Cited by 2,382
Additive manufacturing and its societal impact: a literature review
Huang, S. H., Liu, P., Mokasdar, A., & Hou, L. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4558-5 · Cited by 1,862
Biodegradable polymers for use in surgery—polyglycolic/poly(actic acid) homo- and copolymers: 1
Gilding, D. K., & Reed, A. M. (1979) · Polymer · doi:10.1016/0032-3861(79)90009-0 · Cited by 1,345
Parametric appraisal of mechanical property of fused deposition modelling processed parts
Sood, A. K., Ohdar, R. K., & Mahapatra, S. S. (2010) · Materials & Design · doi:10.1016/j.matdes.2009.06.016 · Cited by 1,318
Tymrak, B. M., Kreiger, M., & Pearce, J. M. (2014) · Materials & Design · doi:10.1016/j.matdes.2014.02.038 · Cited by 1,244
A comparison of rapid prototyping technologies
Pham, D. T., & Gault, R. S. (1998) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(97)00137-5 · Cited by 915
Fused deposition modeling with polypropylene
Carneiro, O. S., Silva, A. F., & Gomes, R. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.06.053 · Cited by 851
Mechanical characterization of parts fabricated using fused deposition modeling
Bellini, A., & Güçeri, S. (2003) · Rapid Prototyping Journal · doi:10.1108/13552540310489631 · Cited by 628
3D printing in aerospace and its long-term sustainability
Joshi, S. C., & Sheikh, A. A. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1111519 · Cited by 628
Dependence of mechanical properties of polyamide components on build parameters in the SLS process
Caulfield, B., McHugh, P. E., & Lohfeld, S. (2007) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2006.09.007 · Cited by 598
Effect of Layer Orientation on Mechanical Properties of Rapid Prototyped Samples
Es-Said, O. S., Foyos, J., Noorani, R., Mendelson, M., Marloth, R., & Pregger, B. A. (2000) · Materials and Manufacturing Processes · doi:10.1080/10426910008912976 · Cited by 577
Measurement of anisotropic compressive strength of rapid prototyping parts
Lee, C. S., Kim, S. G., Kim, H. J., & Ahn, S. (2007) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2006.11.095 · Cited by 504
El-Hadi, A., Schnabel, R., Straube, E., Müller, G., & Henning, S. (2002) · Polymer Testing · doi:10.1016/s0142-9418(01)00142-8 · Cited by 481
Mechanical properties of dense polylactic acid structures fabricated by three dimensional printing
GIORDANO, R. A., Wu, B. M., Borland, S. W., Cima, L. G., Sachs, E. M., & Cima, M. J. (1997) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856297x00588 · Cited by 413
Mechanical Property Optimization of FDM PLA in Shear with Multiple Objectives
Torres, J., Cotelo, J., Karl, J., & Gordon, A. P. (2015) · JOM · doi:10.1007/s11837-015-1367-y · Cited by 374
Material Property Testing of 3D-Printed Specimen in PLA on an Entry-Level 3D Printer
Letcher, T., & Waytashek, M. (2014) · Volume 2A: Advanced Manufacturing · doi:10.1115/imece2014-39379 · Cited by 325
On reducing anisotropy in 3D printed polymers via ionizing radiation
Shaffer, S., Yang, K., Vargas, J., Di Prima, M. A., & Voit, W. (2014) · Polymer · doi:10.1016/j.polymer.2014.07.054 · Cited by 261
Corre, Y.-M., Maazouz, A., Duchet, J., & Reignier, J. (2011) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2011.03.006 · Cited by 226
Deposition direction-dependent failure criteria for fused deposition modeling polycarbonate
Hill, N., & Haghi, M. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-04-2013-0039 · Cited by 181
Impact absorption capacity of 3D-printed components fabricated by fused deposition modelling
Tsouknidas, A., Pantazopoulos, M. S., Katsoulis, I., Fasnakis, D., Maropoulos, S., & Michailidis, N. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.03.154 · Cited by 180
Current progress in 3D printing for cardiovascular tissue engineering
Mosadegh, B., Xiong, G., Dunham, S., & Min, J. K. (2015) · Biomedical Materials · doi:10.1088/1748-6041/10/3/034002 · Cited by 174
van der Wal, A., Mulder, J. J., & Gaymans, R. J. (1998) · Polymer · doi:10.1016/s0032-3861(97)10279-8 · Cited by 167
Structure–mechanical property relationship in fused deposition modelling
Rezayat, H., Zhou, W., Siriruk, A., Penumadu, D., & Babu, S. S. (2015) · Materials Science and Technology · doi:10.1179/1743284715y.0000000010 · Cited by 107
Study of Thermoplastic PLA Foam Extrusion
Lee, S. T., Kareko, L., & Jun, J. (2008) · Journal of Cellular Plastics · doi:10.1177/0021955x08088859 · Cited by 102
Crystallization and thermal behaviour of optically pure polylactides and their blends
Sarasua, J.-R., Arraiza, A. L., Balerdi, P., & Maiza, I. (2005) · Journal of Materials Science · doi:10.1007/s10853-005-1204-8 · Cited by 72
Fast, Precise, Safe Prototypes with FDM
Wales (2018) · Texas ScholarWorks (Texas Digital Library) · doi:10.15781/t21834k30 · Cited by 48
Montrikittiphant, T., Tang, M., Lee, K., Williams, C. K., & Bismarck, A. (2014) · Macromolecular Rapid Communications · doi:10.1002/marc.201400181 · Cited by 33
Self-citation
Cited by
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Mechanical characterization of 3D-printed polymers
Dizon, J. R. C., Espera, A. H., Chen, Q., & Advincula, R. C. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.12.002 · Cited by 1,340
Recent Progress on Polymer Materials for Additive Manufacturing
Tan, L. J., Zhu, W., & Zhou, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003062 · Cited by 740
Mechanical characterization of FDM 3D printing of continuous carbon fiber reinforced PLA composites
Heidari-Rarani, M., Rafiee-Afarani, M., & Zahedi, A. M. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107147 · Cited by 615
Additive manufacturing of natural fiber reinforced polymer composites: Processing and prospects
Balla, V. K., Kate, K. H., Satyavolu, J., Singh, P., & Tadimeti, J. G. D. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.106956 · Cited by 580
Metadata
- Authors
- Song, Y., Li, Y., Song, W., Yee, K., Lee, K.-Y., & Tagarielli, V. L.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2017-06
- Volume
- 123
- Pages
- 154-164
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W2595379635
- Cited by
- 624
- References
- 28
- FWCI
- 36.06
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.