The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
The biomimetic design and 3D printing of customized mechanical properties porous Ti6Al4V scaffold for load-bearing bone reconstruction
Abstract
Abstract The Ti6Al4V alloy is one of the most commonly used in orthopedic surgery. Mechanical property of implant contributes important biological functions for load-bearing bone tissue reconstruction. There is a significant need for design and fabrication of porous scaffold with customized mechanical properties for bone tissue engineering. In this paper, bionic design and fabrication of porous implants were studied by using finite element analysis (FEA) and 3D printing techniques. Novel porous architectures were built up with diamond lattice pore structure arraying units. With finite element analysis, the structure weak points under pressure were simulated so that the mechanical properties of the implants were optimized. Porous implants with different porosities and mechanical properties were precisely fabricated by selected laser melting (SLM), one of powder bed fusion additive manufacturing techniques. The biocompatibility and repair effect were studied by in vivo experiments. Animal results indicated that the damaged load-bearing bones were well reconstructed. New generated bones embedded and fitted into the designed porous implants. The optimized design and precisely manufactured implants are conducive to bone tissue repair and reconstruction.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Van Bael, S., Chai, Y. C., Truscello, S., Moesen, M., Kerckhofs, G., Van Oosterwyck, H., Kruth, J.-P., & Schrooten, J. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.04.001 · Cited by 766
Arabnejad, S., Burnett Johnston, R., Pura, J. A., Singh, B., Tanzer, M., & Pasini, D. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.10.048 · Cited by 578
Selders, G. S., Fetz, A. E., Radic, M. Z., & Bowlin, G. L. (2017) · Regenerative Biomaterials · doi:10.1093/rb/rbw041 · Cited by 538
Mullen, L., Stamp, R. C., Brooks, W. K., Jones, E., & Sutcliffe, C. J. (2009) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.31219 · Cited by 410
Van Hooreweder, B., Apers, Y., Lietaert, K., & Kruth, J.-P. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.10.005 · Cited by 318
Sing, S. L., Wiria, F. E., & Yeong, W. Y. (2018) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2017.06.006 · Cited by 302
Development of a clay based bioink for 3D cell printing for skeletal application
Ahlfeld, T., Cidonio, G., Kilian, D., Duin, S., Akkineni, A. R., Dawson, J. I., Yang, S., Lode, A., Oreffo, R. O. C., & Gelinsky, M. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7e96 · Cited by 301
3D printed hierarchical honeycombs with shape integrity under large compressive deformations
Chen, Y., Li, T., Jia, Z., Scarpa, F., Yao, C.-W., & Wang, L. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.10.028 · Cited by 284
Self-citationYánez, A., Cuadrado, A., Martel, O., Afonso, H., & Monopoli, D. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.11.050 · Cited by 252
Zhang, S., Wei, Q., Cheng, L., Li, S., & Shi, Y. (2014) · Materials & Design · doi:10.1016/j.matdes.2014.05.021 · Cited by 219
Cited by
Multifunctional Mechanical Metamaterials Based on Triply Periodic Minimal Surface Lattices
Al-Ketan, O., & Abu Al-Rub, R. K. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201900524 · Cited by 887
Design and Optimization of Lattice Structures: A Review
Pan, C., Han, Y., & Lu, J. (2020) · Applied Sciences · doi:10.3390/app10186374 · Cited by 640
Improving biocompatibility for next generation of metallic implants
Bandyopadhyay, A., Mitra, I., Goodman, S. B., Kumar, M., & Bose, S. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101053 · Cited by 463
Wu, Y., Fang, J., Wu, C., Li, C., Sun, G., & Li, Q. (2023) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2023.108102 · Cited by 440
Wang, W., Zhang, B., Li, M., Li, J., Zhang, C., Han, Y., Wang, L., Wang, K., Zhou, C., Liu, L., et al. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109192 · Cited by 369
Self-citation
Metadata
- Authors
- Zhang, B., Pei, X., Zhou, C., Fan, Y., Jiang, Q., Ronca, A., D'Amora, U., Chen, Y., Li, H., Sun, Y., & Zhang, X.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2018-08
- Volume
- 152
- Pages
- 30-39
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W2800159482
- Cited by
- 305
- References
- 33
- FWCI
- 11.89
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The biomimetic design and 3D printing of customized mechanical properties porous Ti6Al4V scaffold for load-bearing bone reconstruction. https://app.cochat.ai/papers/10.1016/j.matdes.2018.04.065
- The paper
- Zhang, B., Pei, X., Zhou, C., Fan, Y., Jiang, Q., Ronca, A., D'Amora, U., Chen, Y., Li, H., Sun, Y., & Zhang, X. (2018). The biomimetic design and 3D printing of customized mechanical properties porous Ti6Al4V scaffold for load-bearing bone reconstruction. Materials & Design. https://doi.org/10.1016/j.matdes.2018.04.065
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.