The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
The biomimetic design and 3D printing of customized mechanical properties porous Ti6Al4V scaffold for load-bearing bone reconstruction
Abstract
The Ti6Al4V alloy is one of the most commonly used in orthopedic surgery. Mechanical property of implant contributes important biological functions for load-bearing bone tissue reconstruction. There is a significant need for design and fabrication of porous scaffold with customized mechanical properties for bone tissue engineering. In this paper, bionic design and fabrication of porous implants were studied by using finite element analysis (FEA) and 3D printing techniques. Novel porous architectures were built up with diamond lattice pore structure arraying units. With finite element analysis, the structure weak points under pressure were simulated so that the mechanical properties of the implants were optimized. Porous implants with different porosities and mechanical properties were precisely fabricated by selected laser melting (SLM), one of powder bed fusion additive manufacturing techniques. The biocompatibility and repair effect were studied by in vivo experiments. Animal results indicated that the damaged load-bearing bones were well reconstructed. New generated bones embedded and fitted into the designed porous implants. The optimized design and precisely manufactured implants are conducive to bone tissue repair and reconstruction.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Van Bael, S., Chai, Y. C., Truscello, S., Moesen, M., Kerckhofs, G., Van Oosterwyck, H., Kruth, J.-P., & Schrooten, J. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.04.001 · Cited by 766
Arabnejad, S., Burnett Johnston, R., Pura, J. A., Singh, B., Tanzer, M., & Pasini, D. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.10.048 · Cited by 578
Selders, G. S., Fetz, A. E., Radic, M. Z., & Bowlin, G. L. (2017) · Regenerative Biomaterials · doi:10.1093/rb/rbw041 · Cited by 538
Mullen, L., Stamp, R. C., Brooks, W. K., Jones, E., & Sutcliffe, C. J. (2009) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.31219 · Cited by 410
Van Hooreweder, B., Apers, Y., Lietaert, K., & Kruth, J.-P. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.10.005 · Cited by 318
Sing, S. L., Wiria, F. E., & Yeong, W. Y. (2018) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2017.06.006 · Cited by 302
Development of a clay based bioink for 3D cell printing for skeletal application
Ahlfeld, T., Cidonio, G., Kilian, D., Duin, S., Akkineni, A. R., Dawson, J. I., Yang, S., Lode, A., Oreffo, R. O. C., & Gelinsky, M. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7e96 · Cited by 301
3D printed hierarchical honeycombs with shape integrity under large compressive deformations
Chen, Y., Li, T., Jia, Z., Scarpa, F., Yao, C.-W., & Wang, L. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.10.028 · Cited by 284
Self-citationYánez, A., Cuadrado, A., Martel, O., Afonso, H., & Monopoli, D. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.11.050 · Cited by 252
Zhang, S., Wei, Q., Cheng, L., Li, S., & Shi, Y. (2014) · Materials & Design · doi:10.1016/j.matdes.2014.05.021 · Cited by 219
Interconnected porous hydroxyapatite ceramics for bone tissue engineering
Yoshikawa, H., Tamai, N., Murase, T., & Myoui, A. (2009) · Journal of The Royal Society Interface · doi:10.1098/rsif.2008.0425.focus · Cited by 203
Shao, H., Ke, X., Liu, A., Sun, M., He, Y., Yang, X., Fu, J., Liu, Y., Zhang, L., Yang, G., et al. (2017) · Biofabrication · doi:10.1088/1758-5090/aa663c · Cited by 172
Bagheri, Z. S., Melancon, D., Liu, L., Johnston, R. B., & Pasini, D. (2017) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2016.04.041 · Cited by 162
Static behavior of lattice structures produced via direct metal laser sintering technology
Crupi, V., Kara, E., Epasto, G., Guglielmino, E., & Aykul, H. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.09.003 · Cited by 157
Pei, X., Ma, L., Zhang, B., Sun, J., Sun, Y., Fan, Y., Gou, Z., Zhou, C., & Zhang, X. (2017) · Biofabrication · doi:10.1088/1758-5090/aa90ed · Cited by 150
Self-citationChen, S. Y., Huang, J. C., Pan, C., Lin, C., Yang, T.-J., Huang, Y.-C., Ou, C. H., Chen, L. Y., Lin, D. Y., Lin, H. K., et al. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.04.190 · Cited by 136
Zhou, C., Yang, K., Wang, K., Pei, X., Dong, Z., Hong, Y., & Zhang, X. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.07.094 · Cited by 132
Self-citationBone formation in calcium-phosphate-coated titanium mesh
Vehof, J. W. M., Spauwen, P. H. M., & Jansen, J. A. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00094-6 · Cited by 125
Cuadrado, A., Yánez, A., Martel, O., Deviaene, S., & Monopoli, D. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.09.045 · Cited by 122
Han, X., Zhu, H., Nie, X., Wang, G., & Zeng, X. (2018) · Materials · doi:10.3390/ma11030392 · Cited by 120
Henriksson, I., Gatenholm, P., & Hägg, D. A. (2017) · Biofabrication · doi:10.1088/1758-5090/aa5c1c · Cited by 107
Liu, H., Li, W., Liu, C., Tan, J., Wang, H., Hai, B., Cai, H., Leng, H., Liu, Z., & Song, C. (2016) · Biofabrication · doi:10.1088/1758-5090/8/4/045012 · Cited by 104
Nune, K. C., Kumar, A., Misra, R. D. K., Li, S. J., Hao, Y., & Yang, R. (2016) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2016.09.050 · Cited by 97
Fabrication of biomimetic bone grafts with multi-material 3D printing
Sears, N. A., Dhavalikar, P., Whitely, M. E., & Cosgriff‐Hernandez, E. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7077 · Cited by 87
The use of bioactive peptides to modify materials for bone tissue repair
Wang, C., Liu, Y., Fan, Y., & Li, X. (2017) · Regenerative Biomaterials · doi:10.1093/rb/rbx011 · Cited by 85
Self-citationBionic mechanical design of titanium bone tissue implants and 3D printing manufacture
Pei, X., Zhang, B., Fan, Y., Zhu, X., Sun, Y., Wang, Q., Zhang, X., & Zhou, C. (2017) · Materials Letters · doi:10.1016/j.matlet.2017.04.128 · Cited by 82
Self-citationOtawa, N., Sumida, T., Kitagaki, H., Sasaki, K., Fujibayashi, S., Takemoto, M., Nakamura, T., Yamada, T., Mori, Y., & Matsushita, T. (2015) · Journal of Cranio-Maxillofacial Surgery · doi:10.1016/j.jcms.2015.05.006 · Cited by 71
Li, S., Li, X., Hou, W., Nune, K. C., Misra, R. D. K., Correa-Rodriguez, V. L., Guo, Z., Hao, Y., Yang, R., & Murr, L. E. (2017) · Science China Materials · doi:10.1007/s40843-017-9063-6 · Cited by 65
Kumar, A., Nune, K. C., & Misra, R. D. K. (2017) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.2614 · Cited by 41
Naddeo, F., Cappetti, N., & Naddeo, A. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.10.033 · Cited by 38
Cho, H., Cho, Y., & Han, H. N. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.07.003 · Cited by 31
Zhou, C., Ye, X. J., Fan, Y., Qing, F., Chen, H., & Zhang, X. (2014) · Composites Part B Engineering · doi:10.1016/j.compositesb.2014.03.008 · Cited by 31
Self-citationNaddeo, F., Naddeo, A., & Cappetti, N. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.10.037 · Cited by 28
Cited by
Multifunctional Mechanical Metamaterials Based on Triply Periodic Minimal Surface Lattices
Al-Ketan, O., & Abu Al-Rub, R. K. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201900524 · Cited by 887
Design and Optimization of Lattice Structures: A Review
Pan, C., Han, Y., & Lu, J. (2020) · Applied Sciences · doi:10.3390/app10186374 · Cited by 640
Improving biocompatibility for next generation of metallic implants
Bandyopadhyay, A., Mitra, I., Goodman, S. B., Kumar, M., & Bose, S. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101053 · Cited by 463
Wu, Y., Fang, J., Wu, C., Li, C., Sun, G., & Li, Q. (2023) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2023.108102 · Cited by 440
Wang, W., Zhang, B., Li, M., Li, J., Zhang, C., Han, Y., Wang, L., Wang, K., Zhou, C., Liu, L., et al. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109192 · Cited by 369
Self-citation
Metadata
- Authors
- Zhang, B., Pei, X., Zhou, C., Fan, Y., Jiang, Q., Ronca, A., D'Amora, U., Chen, Y., Li, H., Sun, Y., & Zhang, X.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2018-08
- Volume
- 152
- Pages
- 30-39
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W2800159482
- Cited by
- 305
- References
- 33
- FWCI
- 11.89
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.