The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Effect of alkali cation type on strength endurance of fly ash geopolymers subject to high temperature exposure
Abstract
Abstract Choice of alkali cation in mix design of geopolymers is critical for their thermal performance. However, the influence of alkali cation type on strength endurance of geopolymers subject to high temperature exposure and the underlying governing mechanisms have not been studied. This study investigated the effects of alkali cation type on high temperature response of fly ash geopolymers aiming towards structural applications. In-depth investigation was carried out to discover the underlying mechanisms governing the strength endurance of fly ash geopolymers subject to high temperature exposure and its correlation with their volume stability and chemical stability. Results showed that potassium geopolymer exhibited significant strength enhancement (30–40%) and sodium geopolymer displayed reduced strength (10%), and the strength of mixed sodium and potassium geopolymer remained unchanged after exposure to elevated temperature. While the binders were chemically stable without deterioration and formation of new crystal phases after high temperature exposure, the volume stability varied with the type of alkali cation used. Formation of cracks and gel densification due to shrinkage, and healing of micro-cracks and change of pore sizes due to sintering were identified as responsible mechanisms at different temperature ranges. While crack development and enlargement of pores lowered the strength, densification of matrix and healing of micro-cracks favored strength gain. These competing mechanisms determine the strength endurance of geopolymers depending on the type of alkali cation used. Overall, it shows that geopolymers can be tailored, such that stable (or even enhanced) strengths upon thermal exposure are realized, for structural applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Rickard, W. D. A., Williams, R., Temuujin, J., & van Riessen, A. (2011) · Materials Science and Engineering A · doi:10.1016/j.msea.2011.01.005 · Cited by 243
Cited by
Advances in geopolymer materials: A comprehensive review
Cong, P., & Cheng, Y. (2021) · Journal of Traffic and Transportation Engineering (English Edition) · doi:10.1016/j.jtte.2021.03.004 · Cited by 481
A critical review of geopolymer properties for structural fire-resistance applications
Lahoti, M., Tan, K. H., & Yang, E.-H. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.06.076 · Cited by 431
Self-citationFactors Affecting the Compressive Strength of Geopolymers: A Review
Castillo, H., Collado, H., Droguett, T., Sánchez, S., Vesely, M., Garrido, P., & Palma, S. (2021) · Minerals · doi:10.3390/min11121317 · Cited by 231
Metadata
- Authors
- Lahoti, M., Wong, K. K., Tan, K. H., & Yang, E.-H.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2018-09
- Volume
- 154
- Pages
- 8-19
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W2799786367
- Cited by
- 167
- References
- 1
- FWCI
- 9.88
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effect of alkali cation type on strength endurance of fly ash geopolymers subject to high temperature exposure. https://app.cochat.ai/papers/10.1016/j.matdes.2018.05.023
- The paper
- Lahoti, M., Wong, K. K., Tan, K. H., & Yang, E.-H. (2018). Effect of alkali cation type on strength endurance of fly ash geopolymers subject to high temperature exposure. Materials & Design. https://doi.org/10.1016/j.matdes.2018.05.023
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.