The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Inconel 625 lattice structures manufactured by selective laser melting (SLM): Mechanical properties, deformation and failure modes
Abstract
Abstract Additive Manufacture (AM) enables the fabrication of highly complex lattice structures with exceptional engineering properties. Inconel is a technically useful material in that it provides high resistance to oxidisation, creep and loss of mechanical properties at elevated temperatures. The combination of Inconel material properties and the geometric freedom of AM provides a unique opportunity for the fabrication of engineered structures with exceptional strength and stiffness at elevated temperatures, as for example is required for high temperature turbomachinery. Despite the associated technical opportunities, there exists no design data on the mechanical response, deformation characteristics and failure modes of AM Inconel 625 lattice structures. This research provides a comprehensive reference for the mechanical response of Inconel 625 lattice structures fabricated by Selective Laser Melting (SLM). Furthermore, the high ductility of Inconel 625 lattice enables novel insight into the structural mechanics of AM lattice, and the associated deformation photography provides a reference for the validation and verification of numerical models of AM lattice behaviour.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Cellular solids: Structure and properties
Wolcott, M. P. (1990) · Materials Science and Engineering: A · doi:10.1016/0921-5093(90)90295-e · Cited by 5,926
The Superalloys: Fundamentals and Applications
Reed, R. C. (2008) · Cited by 3,725
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
Materials Selection in Mechanical Design
(2011) · Elsevier eBooks · doi:10.1016/c2009-0-25539-5 · Cited by 2,679
Review of selective laser melting: Materials and applications
Yap, C. Y., Chua, C. K., Dong, Z. L., Liu, Z. H., Zhang, D. Q., Loh, L. E., & Sing, S. L. (2015) · Applied Physics Reviews · doi:10.1063/1.4935926 · Cited by 2,353
Effective properties of the octet-truss lattice material
Deshpande, V. S., Fleck, N. A., & Ashby, M. F. (2001) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(01)00010-2 · Cited by 1,741
Foam topology: bending versus stretching dominated architectures
Deshpande, V. S., Ashby, M. F., & Fleck, N. A. (2001) · Acta Materialia · doi:10.1016/s1359-6454(00)00379-7 · Cited by 1,623
King, W. E., Anderson, A. T., Ferencz, R. M., Hodge, N. E., Kamath, C., Khairallah, S. A., & Rubenchik, A. M. (2015) · Applied Physics Reviews · doi:10.1063/1.4937809 · Cited by 1,258
Materials for additive manufacturing
Bourell, D., Kruth, J. P., Leu, M., Levy, G., Rosen, D., Beese, A. M., & Clare, A. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.05.009 · Cited by 1,034
Jia, Q., & Gu, D. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.09.171 · Cited by 905
Single track formation in selective laser melting of metal powders
Yadroitsev, I., Gusarov, A., Yadroitsava, I., & Smurov, I. (2010) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.05.010 · Cited by 827
The microstructure and mechanical properties of deposited-IN718 by selective laser melting
Wang, Z., Guan, K., Gao, M., Li, X., Chen, X., & Zeng, X. (2012) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2011.10.107 · Cited by 812
Zhang, D., Niu, W., Cao, X., & Liu, Z. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.06.021 · Cited by 723
A review of developments towards dry and high speed machining of Inconel 718 alloy
Dudzinski, D., Devillez, A., Moufki, A., Larrouquère, D., Zerrouki, V, & Vigneau, J. (2004) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(03)00159-7 · Cited by 716
(2013) · Medical Entomology and Zoology · Cited by 690
Trosch, T., Strößner, J., Völkl, R., & Glatzel, U. (2016) · Materials Letters · doi:10.1016/j.matlet.2015.10.136 · Cited by 556
Selective laser melting (SLM) of AlSi12Mg lattice structures
Leary, M., Mazur, M., Elambasseril, J., McMillan, M., Chirent, T., Sun, Y., Qian, M., Easton, M., & Brandt, M. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.02.127 · Cited by 525
Self-citationNickel based superalloy welding practices for industrial gas turbine applications
Henderson, M. B., Arrell, D. J., Larsson, R., Heobel, M., & Marchant, G. (2004) · Science and Technology of Welding & Joining · doi:10.1179/136217104225017099 · Cited by 522
Evaluation of topology-optimized lattice structures manufactured via selective laser melting
Xiao, Z., Yang, Y., Xiao, R., Bai, Y., Song, C., & Wang, D. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.01.023 · Cited by 380
Yadroitsev, I., Thivillon, L., Bertrand, P., & Smurov, I. (2007) · Applied Surface Science · doi:10.1016/j.apsusc.2007.08.046 · Cited by 351
Materials selection in mechanical design
Summerscales, J. (1993) · Composites Manufacturing · doi:10.1016/0956-7143(93)90102-e · Cited by 329
Strößner, J., Terock, M., & Glatzel, U. (2015) · Advanced Engineering Materials · doi:10.1002/adem.201500158 · Cited by 327
Additive Manufacturing: Making Imagination the Major Limitation
Zhai, Y., Lados, D. A., & LaGoy, J. L. (2014) · JOM · doi:10.1007/s11837-014-0886-2 · Cited by 324
Kanagarajah, P., Brenne, F., Niendorf, T., & Maier, H. J. (2013) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.09.025 · Cited by 318
Mazur, M., Leary, M., Sun, S., Vcelka, M., Shidid, D., & Brandt, M. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7655-4 · Cited by 314
Self-citationDesign for Additive Manufacturing of Cellular Structures
Chu, C., Graf, G., & Rosen, D. W. (2008) · Computer-Aided Design and Applications · doi:10.3722/cadaps.2008.686-696 · Cited by 300
Jia, Q., & Gu, D. (2014) · Optics & Laser Technology · doi:10.1016/j.optlastec.2014.03.008 · Cited by 260
Yánez, A., Cuadrado, A., Martel, O., Afonso, H., & Monopoli, D. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.11.050 · Cited by 252
Rickenbacher, L., Etter, T., Hövel, S., & Wegener, K. (2013) · Rapid Prototyping Journal · doi:10.1108/13552541311323281 · Cited by 239
Detection of Process Failures in Layerwise Laser Melting with Optical Process Monitoring
Craeghs, T., Clijsters, S., Kruth, J.-P., Bechmann, F., & Ebert, M.-C. (2012) · Physics Procedia · doi:10.1016/j.phpro.2012.10.097 · Cited by 226
Contact thermal conductivity of a powder bed in selective laser sintering
Gusarov, A. V., Laoui, T., Froyen, L., & Titov, V. I. (2003) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(02)00370-8 · Cited by 195
Additive manufacturing. General principles. Terminology
(2016) · doi:10.3403/30331378 · Cited by 166
Additive manufacturing of metallic cellular materials via three-dimensional printing
Williams, C. B., Cochran, J. K., & Rosen, D. W. (2010) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-010-2812-2 · Cited by 152
Mazur, M., Leary, M., McMillan, M., Sun, S., Shidid, D., & Brandt, M. (2016) · Elsevier eBooks · doi:10.1016/b978-0-08-100433-3.00005-1 · Cited by 146
Self-citationRapid manufacturing of lattice structures with selective laser melting
Rehme, O., & Emmelmann, C. (2006) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.645848 · Cited by 122
Alkahari, M. R., FURUMOTO, T., Takashi, U. E. D. A., Hosokawa, A., Tanaka, R., & Aziz, M. S. A. (2012) · Key engineering materials · doi:10.4028/www.scientific.net/kem.523-524.244 · Cited by 99
Generative Design Rationale: Beyond the Record and Replay Paradigm
Gruber, T., & Russell, D. M. (2020) · CRC Press eBooks · doi:10.1201/9781003064053-14 · Cited by 71
Just-in-time Design and Additive Manufacture of Patient-specific Medical Implants
Shidid, D., Leary, M., Choong, P., & Brandt, M. (2016) · Physics Procedia · doi:10.1016/j.phpro.2016.08.002 · Cited by 71
Self-citationMcMillan, M., Leary, M., & Brandt, M. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.06.058 · Cited by 60
Self-citation
Cited by
SLM lattice structures: Properties, performance, applications and challenges
Maconachie, T., Leary, M., Lozanovski, B., Zhang, X., Qian, M., Faruque, O., & Brandt, M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108137 · Cited by 1,497
Self-citationBenedetti, M., du Plessis, A., Ritchie, R. O., Dallago, M., Razavi, N., & Berto, F. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100606 · Cited by 788
Properties and applications of additively manufactured metallic cellular materials: A review
du Plessis, A., Razavi, N., Benedetti, M., Murchio, S., Leary, M., Watson, M., Bhate, D., & Berto, F. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100918 · Cited by 623
Self-citationChen, L.-Y., Liang, S.-X., Liu, Y., & Zhang, L.-C. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100648 · Cited by 603
Powder Bed Fusion of nickel-based superalloys: A review
Sanchez, S., Smith, P., Xu, Z., Gaspard, G., Hyde, C. J., Wits, W. W., Ashcroft, I. A., Chen, H., & Clare, A. T. (2021) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2021.103729 · Cited by 541
Metadata
- Authors
- Leary, M., Mazur, M., Williams, H., Yang, E., Alghamdi, A., Lozanovski, B., Zhang, X., Shidid, D., Farahbod-Sternahl, L., Witt, G., Kelbassa, I., Choong, P., Qian, M., & Brandt, M.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2018-11
- Volume
- 157
- Pages
- 179-199
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W2810693877
- Cited by
- 456
- References
- 41
- FWCI
- 19.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.