The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
Computational modelling of strut defects in SLM manufactured lattice structures
Open accessAbstract
Addition of manufacturing defects to computational models of 3D-printed lattice structures enable improved simulation accuracy. A computational model of a cellular structure based on finite element method (FEM) analysis, often starts from defect-free computer-aided design (CAD) geometries to generate discretised meshes. Such idealised CAD geometries neglect imperfections, which occur during the additive manufacturing process of lattice structures, resulting in model oversimplification. This research aims to incorporate manufacturing defects in the strut elements of a lattice structure, thereby enhancing predictive capabilities of models. In this work, a method of generating CAD AM representative strut models is proposed. The models are generated from micro-computer tomography (μCT) analysis of SLM fabricated struts. The proposed additive manufacturing (AM) representative strut FE model's axial stiffness and critical buckling load is compared to idealised- and μCT- based FE models, with significant error reduction over idealised strut models. The AM representative strut models are then used to generate full lattice FE models and compared with manufactured and idealised FE models. The AM representative FE lattice models show greater correlations toward experiment and more realistic deformation behaviours. Overall, the methodology used in this study demonstrates a novel approach to representing struts in FE models of AM fabricated lattice structures. • A computationally inexpensive method of generating AM representative lattice geometries for FE modelling is proposed. • The method is successfully applied to predict the mechanical response of SLM fabricated Inconel 625. • Extracted geometrical properties can form the basis of a database for numerical modelling of AM lattice topologies. • Geometrical data can be used to randomly generate AM representative strut models for stochastic FEM.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
Ashby, M., Evans, A., Fleck, N., Gibson, L., Hutchinson, J., Wadley, H., & Delale, F. (2001) · Applied Mechanics Reviews · doi:10.1115/1.1421119 · Cited by 2,694
Ashby, M. F., Evans, A., Fleck, N. A., Gibson, L. J., Hutchinson, J. W., & Wadley, H. N. G. (2002) · Materials & Design · doi:10.1016/s0261-3069(01)00049-8 · Cited by 2,367
Foam topology: bending versus stretching dominated architectures
Deshpande, V. S., Ashby, M. F., & Fleck, N. A. (2001) · Acta Materialia · doi:10.1016/s1359-6454(00)00379-7 · Cited by 1,623
Gong, H., Rafi, K., Gu, H., Starr, T., & Stucker, B. (2014) · Additive Manufacturing · doi:10.1016/j.addma.2014.08.002 · Cited by 1,038
L. On the calculation of the equilibrium and stiffness of frames
Maxwell, J. C. (1864) · The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science · doi:10.1080/14786446408643668 · Cited by 1,028
Cellular Ceramics: Structure, Manufacturing, Properties and Applications
(2005) · Wiley eBooks · doi:10.1002/3527606696 · Cited by 712
Calladine, C. R. (1978) · International Journal of Solids and Structures · doi:10.1016/0020-7683(78)90052-5 · Cited by 657
Economics of additive manufacturing for end-usable metal parts
Atzeni, E., & Salmi, A. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3878-1 · Cited by 630
Cited by
SLM lattice structures: Properties, performance, applications and challenges
Maconachie, T., Leary, M., Lozanovski, B., Zhang, X., Qian, M., Faruque, O., & Brandt, M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108137 · Cited by 1,497
Self-citationBenedetti, M., du Plessis, A., Ritchie, R. O., Dallago, M., Razavi, N., & Berto, F. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100606 · Cited by 788
Wu, Y., Fang, J., Wu, C., Li, C., Sun, G., & Li, Q. (2023) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2023.108102 · Cited by 440
Metadata
- Authors
- Lozanovski, B., Leary, M., Tran, P., Shidid, D., Qian, M., Choong, P., & Brandt, M.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2019-06
- Volume
- 171
- Pages
- 107671
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W2919312428
- Cited by
- 256
- References
- 40
- FWCI
- 18.28
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Computational modelling of strut defects in SLM manufactured lattice structures. https://app.cochat.ai/papers/10.1016/j.matdes.2019.107671
- The paper
- Lozanovski, B., Leary, M., Tran, P., Shidid, D., Qian, M., Choong, P., & Brandt, M. (2019). Computational modelling of strut defects in SLM manufactured lattice structures. Materials & Design. https://doi.org/10.1016/j.matdes.2019.107671
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.