The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
Computational modelling of strut defects in SLM manufactured lattice structures
Open accessAbstract
Addition of manufacturing defects to computational models of 3D-printed lattice structures enable improved simulation accuracy. A computational model of a cellular structure based on finite element method (FEM) analysis, often starts from defect-free computer-aided design (CAD) geometries to generate discretised meshes. Such idealised CAD geometries neglect imperfections, which occur during the additive manufacturing process of lattice structures, resulting in model oversimplification. This research aims to incorporate manufacturing defects in the strut elements of a lattice structure, thereby enhancing predictive capabilities of models. In this work, a method of generating CAD AM representative strut models is proposed. The models are generated from micro-computer tomography (μCT) analysis of SLM fabricated struts. The proposed additive manufacturing (AM) representative strut FE model's axial stiffness and critical buckling load is compared to idealised- and μCT- based FE models, with significant error reduction over idealised strut models. The AM representative strut models are then used to generate full lattice FE models and compared with manufactured and idealised FE models. The AM representative FE lattice models show greater correlations toward experiment and more realistic deformation behaviours. Overall, the methodology used in this study demonstrates a novel approach to representing struts in FE models of AM fabricated lattice structures. • A computationally inexpensive method of generating AM representative lattice geometries for FE modelling is proposed. • The method is successfully applied to predict the mechanical response of SLM fabricated Inconel 625. • Extracted geometrical properties can form the basis of a database for numerical modelling of AM lattice topologies. • Geometrical data can be used to randomly generate AM representative strut models for stochastic FEM.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
Ashby, M., Evans, A., Fleck, N., Gibson, L., Hutchinson, J., Wadley, H., & Delale, F. (2001) · Applied Mechanics Reviews · doi:10.1115/1.1421119 · Cited by 2,694
Ashby, M. F., Evans, A., Fleck, N. A., Gibson, L. J., Hutchinson, J. W., & Wadley, H. N. G. (2002) · Materials & Design · doi:10.1016/s0261-3069(01)00049-8 · Cited by 2,367
Foam topology: bending versus stretching dominated architectures
Deshpande, V. S., Ashby, M. F., & Fleck, N. A. (2001) · Acta Materialia · doi:10.1016/s1359-6454(00)00379-7 · Cited by 1,623
Gong, H., Rafi, K., Gu, H., Starr, T., & Stucker, B. (2014) · Additive Manufacturing · doi:10.1016/j.addma.2014.08.002 · Cited by 1,038
L. On the calculation of the equilibrium and stiffness of frames
Maxwell, J. C. (1864) · The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science · doi:10.1080/14786446408643668 · Cited by 1,028
Cellular Ceramics: Structure, Manufacturing, Properties and Applications
(2005) · Wiley eBooks · doi:10.1002/3527606696 · Cited by 712
Calladine, C. R. (1978) · International Journal of Solids and Structures · doi:10.1016/0020-7683(78)90052-5 · Cited by 657
Economics of additive manufacturing for end-usable metal parts
Atzeni, E., & Salmi, A. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3878-1 · Cited by 630
Smith, M., Guan, Z., & Cantwell, W. J. (2013) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2012.12.004 · Cited by 545
Selective laser melting (SLM) of AlSi12Mg lattice structures
Leary, M., Mazur, M., Elambasseril, J., McMillan, M., Chirent, T., Sun, Y., Qian, M., Easton, M., & Brandt, M. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.02.127 · Cited by 525
Self-citationCellular ceramics: structure, manufacturing, properties, and applications
(2006) · Focus on Catalysts · doi:10.1016/s1351-4180(06)71854-2 · Cited by 489
Leary, M., Mazur, M., Williams, H., Yang, E., Alghamdi, A., Lozanovski, B., Zhang, X., Shidid, D., Farahbod-Sternahl, L., Witt, G., et al. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.06.010 · Cited by 456
Self-citationVan Bael, S., Kerckhofs, G., Moesen, M., Pyka, G., Schrooten, J., & Kruth, J. P. (2011) · Materials Science and Engineering: A · doi:10.1016/j.msea.2011.06.045 · Cited by 452
Compressive behaviour of stainless steel micro-lattice structures
Gümrük, R., & Mines, R. A. W. (2013) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2013.01.006 · Cited by 445
On the Calculation of the Equilibrium and Stiffness of Frames
(2011) · The Scientific Papers of James Clerk Maxwell · doi:10.1017/cbo9780511698095.029 · Cited by 416
Leary, M., Merli, L., Torti, F., Mazur, M., & Brandt, M. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.06.015 · Cited by 406
Self-citationMechanical properties of open-cell metallic biomaterials manufactured using additive manufacturing
Campoli, G., Borleffs, M. S., Amin Yavari, S., Wauthle, R., Weinans, H., & Zadpoor, A. A. (2013) · Materials & Design · doi:10.1016/j.matdes.2013.01.071 · Cited by 404
Multiscale Modeling of Powder Bed–Based Additive Manufacturing
Markl, M., & Körner, C. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032158 · Cited by 401
Guide for Verification and Validation in Computational Solid Mechanics
Schwer, L. E. (2009) · NCSU Libraries Repository (North Carolina State University Libraries) · Cited by 391
A numerical study of auxetic composite panels under blast loadings
Imbalzano, G., Tran, P., Ngo, T., & Lee, P. V. S. (2015) · Composite Structures · doi:10.1016/j.compstruct.2015.09.038 · Cited by 390
Self-citationEvaluation of topology-optimized lattice structures manufactured via selective laser melting
Xiao, Z., Yang, Y., Xiao, R., Bai, Y., Song, C., & Wang, D. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.01.023 · Cited by 380
Yadroitsev, I., Thivillon, L., Bertrand, P., & Smurov, I. (2007) · Applied Surface Science · doi:10.1016/j.apsusc.2007.08.046 · Cited by 351
Mazur, M., Leary, M., Sun, S., Vcelka, M., Shidid, D., & Brandt, M. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7655-4 · Cited by 314
Self-citationThree-dimensional modelling of auxetic sandwich panels for localised impact resistance
Imbalzano, G., Tran, P., Ngo, T., & Lee, P. V. S. (2015) · Journal of Sandwich Structures & Materials · doi:10.1177/1099636215618539 · Cited by 301
Self-citationKaramooz Ravari, M. R., Kadkhodaei, M., Badrossamay, M., & Rezaei, R. (2014) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2014.08.009 · Cited by 281
Tsopanos, S., Mines, R. A. W., McKown, S., Shen, Y., Cantwell, W. J., Brooks, W., & Sutcliffe, C. J. (2010) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4001743 · Cited by 252
Sun, S., Brandt, M., & Easton, M. (2017) · Laser Additive Manufacturing · doi:10.1016/b978-0-08-100433-3.00002-6 · Cited by 233
Self-citationDesign and characterisation of a tuneable 3D buckling-induced auxetic metamaterial
Ren, X. Y., Shen, J., Tran, P., Ngo, T., & Xie, Y. M. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.11.025 · Cited by 203
Self-citationFinite element modeling concepts and linear analyses of 3D regular open cell structures
Luxner, M. H., Stampfl, J., & Pettermann, H. E. (2005) · Journal of Materials Science · doi:10.1007/s10853-005-5020-y · Cited by 191
Compressive behaviour of gyroid lattice structures for human cancellous bone implant applications
Yánez, A., Herrera, A., Martel, O., Monopoli, D., & Afonso, H. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.06.016 · Cited by 174
Additive manufacturing. General principles. Terminology
(2016) · doi:10.3403/30331378 · Cited by 166
Sing, S. L., Yeong, W. Y., Wiria, F. E., & Tay, B. Y. (2016) · Experimental Mechanics · doi:10.1007/s11340-015-0117-y · Cited by 144
Rapid manufacturing of lattice structures with selective laser melting
Rehme, O., & Emmelmann, C. (2006) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.645848 · Cited by 122
Karamooz-Ravari, M. R., Esfahani, S. N., Andani, M. T., Kadkhodaei, M., Ghaei, A., Karaca, H. E., & Elahinia, M. (2016) · Smart Materials and Structures · doi:10.1088/0964-1726/25/2/025008 · Cited by 92
Hedayati, R., Janbaz, S., Sadighi, M., Aghdam, M. M., & ZADPOOR, A. A. (2016) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2016.10.003 · Cited by 86
Bionic mechanical design of titanium bone tissue implants and 3D printing manufacture
Pei, X., Zhang, B., Fan, Y., Zhu, X., Sun, Y., Wang, Q., Zhang, X., & Zhou, C. (2017) · Materials Letters · doi:10.1016/j.matlet.2017.04.128 · Cited by 82
CAD/CAM-assisted breast reconstruction
Melchels, F. P. W., Wiggenhauser, P. S., Warne, D. J., Barry, M., Ong, F. R., Chong, W. S., Hutmacher, D. W., & Schantz, J. (2011) · Biofabrication · doi:10.1088/1758-5082/3/3/034114 · Cited by 69
A Unit Cell Approach for Lightweight Structure and Compliant Mechanism
Wang, H. V. (2005) · UPT. Syiah Kuala University Library (Syiah Kuala University) · Cited by 60
Cited by
SLM lattice structures: Properties, performance, applications and challenges
Maconachie, T., Leary, M., Lozanovski, B., Zhang, X., Qian, M., Faruque, O., & Brandt, M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108137 · Cited by 1,497
Self-citationBenedetti, M., du Plessis, A., Ritchie, R. O., Dallago, M., Razavi, N., & Berto, F. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100606 · Cited by 788
Wu, Y., Fang, J., Wu, C., Li, C., Sun, G., & Li, Q. (2023) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2023.108102 · Cited by 440
Metadata
- Authors
- Lozanovski, B., Leary, M., Tran, P., Shidid, D., Qian, M., Choong, P., & Brandt, M.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2019-06
- Volume
- 171
- Pages
- 107671
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W2919312428
- Cited by
- 256
- References
- 40
- FWCI
- 18.28
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.