The DOI matches its Crossref record; 55 of the 55 references it cites were found in a registry or an index.
Mechanical design and multifunctional applications of chiral mechanical metamaterials: A review
Open accessAbstract
Rational design of artificial micro-structured metamaterials with advanced mechanical and physical properties that are not accessible in nature materials is challenging and important. In our paper, mechanical designs of 2D and 3D chiral mechanical metamaterials are reviewed, and their mechanical behaviors and deformation mechanisms can be investigated through equilibrium principle, strain energy analysis, micropolar elasticity and homogenization theories. Afterwards, multifunctional properties of chiral mechanical metamaterials are elaborated, such as: vibration attenuation, impact energy absorption and negative coefficient of thermal expansion (CTE). Finally, several successful industrial applications of chiral mechanical metamaterials are demonstrated, such as: morphing airfoil smart deployable antenna and reconfigurable structures, auxetic stent, chiral flexible electronics and phase transforming metastructures, etc. Finally, perspectives and challenges on chiral mechanical metamaterials are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Vos, T., Abajobir, A. A., Abate, K. H., Abbafati, C., Abbas, K. M., Abd-Allah, F., Abdulkader, R. S., Abdulle, A. M., Abebo, T. A., Abera, S. F., et al. (2017) · The Lancet · doi:10.1016/s0140-6736(17)32154-2 · Cited by 13,220
Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
Wang, H., Naghavi, M., Allen, C., Barber, R. M., Bhutta, Z. A., Carter, A., Casey, D. C., Charlson, F. J., Chen, A. Z., Coates, M. M., et al. (2016) · The Lancet · doi:10.1016/s0140-6736(16)31012-1 · Cited by 6,596
Foam Structures with a Negative Poisson's Ratio
Lakes, R. (1987) · Science · doi:10.1126/science.235.4792.1038 · Cited by 3,866
Cosserat, E., & Cosserat, F. (.-1. A. D. T. (1909) · Cited by 1,378
Evans, K. E., Nkansah, M. A., HUTCHINSON, I. J., & ROGERS, S. C. (1991) · Nature · doi:10.1038/353124a0 · Cited by 1,290
Auxetic metamaterials and structures: a review
Ren, X., Das, R., Tran, P., Ngo, T. D., & Xie, Y. M. (2018) · Smart Materials and Structures · doi:10.1088/1361-665x/aaa61c · Cited by 1,277
The mechanics of two-dimensional cellular materials
Gibson, L. J., Ashby, M. F., Schajer, G. S., & Robertson, C. I. (1982) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1982.0087 · Cited by 1,253
Mechanical metamaterials associated with stiffness, rigidity and compressibility: A brief review
Yu, X., Zhou, J., Liang, H., Jiang, Z., & Wu, L. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.12.003 · Cited by 1,140
Three-dimensional mechanical metamaterials with a twist
Frenzel, T., Kadic, M., & Wegener, M. (2017) · Science · doi:10.1126/science.aao4640 · Cited by 1,103
Properties of a chiral honeycomb with a poisson's ratio of — 1
Prall, D., & Lakes, R. S. (1997) · International Journal of Mechanical Sciences · doi:10.1016/s0020-7403(96)00025-2 · Cited by 1,049
Mechanical Metamaterials and Their Engineering Applications
Surjadi, J. U., Gao, L., Du, H., Li, X., Xiong, X., Fang, N. X., & Lu, Y. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201800864 · Cited by 982
Negative Poisson's Ratio Behavior Induced by an Elastic Instability
Bertoldi, K., Reis, P. M., Willshaw, S., & Mullin, T. (2010) · Advanced Materials · doi:10.1002/adma.200901956 · Cited by 903
Auxetic behavior from rotating squares
Grima, J. N., & Evans, K. E. (2000) · Journal of Materials Science Letters · doi:10.1023/a:1006781224002 · Cited by 890
Bistable auxetic mechanical metamaterials inspired by ancient geometric motifs
Rafsanjani, A., & Pasini, D. (2016) · Extreme Mechanics Letters · doi:10.1016/j.eml.2016.09.001 · Cited by 476
A novel mechanism for generating auxetic behaviour in reticulated foams: missing rib foam model
Smith, C. W., Grima, J. N., & Evans, K. E. (2000) · Acta Materialia · doi:10.1016/s1359-6454(00)00269-x · Cited by 455
Negative-Poisson's-Ratio Materials: Auxetic Solids
Lakes, R. S. (2017) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070616-124118 · Cited by 455
Negative Poisson's Ratio in Modern Functional Materials
Huang, C., & Chen, L. (2016) · Advanced Materials · doi:10.1002/adma.201601363 · Cited by 439
From flat sheets to curved geometries: Origami and kirigami approaches
Callens, S. J. P., & Zadpoor, A. A. (2018) · Materials Today · doi:10.1016/j.mattod.2017.10.004 · Cited by 433
Method of Packaging and Deployment of Large Membranes in Space
Miura, K. (1985) · JAXA Repository (JAXA) · Cited by 424
Morphable 3D mesostructures and microelectronic devices by multistable buckling mechanics
Fu, H., Nan, K., Bai, W., Huang, W., Bai, K., Lu, L., Zhou, C., Liu, Y., Liu, F., Wang, J., et al. (2018) · Nature Materials · doi:10.1038/s41563-017-0011-3 · Cited by 393
Baltimore Lectures on Molecular Dynamics and the Wave Theory of Light
Thomson, B. K. (2010) · Cambridge University Press eBooks · doi:10.1017/cbo9780511694523 · Cited by 374
Engineering the shape and structure of materials by fractal cut
Cho, Y., Shin, J.-H., Costa, A., Kim, T. A., Kunin, V., Li, J., Lee, S. Y., Yang, S., Han, H. N., Choi, I.-S., et al. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1417276111 · Cited by 366
Phononic properties of hexagonal chiral lattices
Spadoni, A., Ruzzene, M., Gonella, S., & Scarpa, F. (2009) · Wave Motion · doi:10.1016/j.wavemoti.2009.04.002 · Cited by 335
Review of Mechanics and Applications of Auxetic Structures
Mir, M., Ali, M. N., Sami, J., & Ansari, U. (2014) · Advances in Materials Science and Engineering · doi:10.1155/2014/753496 · Cited by 324
Nano-kirigami with giant optical chirality
Liu, Z., Du, H., Li, J., Lu, L., Li, Z.-Y., & Fang, N. X. (2018) · Science Advances · doi:10.1126/sciadv.aat4436 · Cited by 322
Yuan, S., Shen, F., Bai, J., Chua, C. K., Wei, J., & Zhou, K. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.01.098 · Cited by 295
Tang, Y., & Yin, J. (2017) · Extreme Mechanics Letters · doi:10.1016/j.eml.2016.07.005 · Cited by 267
Isotropic Negative Thermal Expansion Metamaterials
Wu, L., Li, B., & Zhou, J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b05717 · Cited by 256
New Twists of 3D Chiral Metamaterials
Fernandez‐Corbaton, I., Rockstuhl, C., Ziemke, P., Gumbsch, P., Albiez, A., Schwaiger, R., Frenzel, T., Kadic, M., & Wegener, M. (2019) · Advanced Materials · doi:10.1002/adma.201807742 · Cited by 245
Internally resonating lattices for bandgap generation and low-frequency vibration control
Baravelli, E., & Ruzzene, M. (2013) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2013.08.014 · Cited by 242
Mechanical properties of anti-tetrachiral auxetic stents
Wu, W., Song, X., Liang, J., Xia, R., Qian, G., & Fang, D. (2018) · Composite Structures · doi:10.1016/j.compstruct.2017.11.048 · Cited by 216
Self-citationConstruction of micropolar continua from the asymptotic homogenization of beam lattices
Dos Reis, F., & Ganghoffer, J. F. (2012) · Computers & Structures · doi:10.1016/j.compstruc.2012.08.006 · Cited by 185
Modelling, and characterization of 3D printed cellular structures
Kucewicz, M., Baranowski, P., Małąchowski, J., Popławski, A., & Płatek, P. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.01.028 · Cited by 185
Bistable Auxetic Mechanical Metamaterials Inspired by Ancient Geometric MotifsPreprint
Rafsanjani, A., & Pasini, D. (n.d.) · RePEc: Research Papers in Economics · Cited by 169
Hierarchical chirality transfer in the growth of Towel Gourd tendrils
Wang, J.-S., Wang, G., Feng, X.-Q., Kitamura, T., Kang, Y.-L., Yu, S.-W., & Qin, Q.-H. (2013) · Scientific Reports · doi:10.1038/srep03102 · Cited by 167
Auxetic metamaterials exhibiting giant negative Poisson's ratios
Mizzi, L., Azzopardi, K. M., Attard, D., Grima, J. N., & Gatt, R. (2015) · physica status solidi (RRL) – Rapid Research Letters · doi:10.1002/pssr.201510178 · Cited by 162
Duan, S., Wen, W., & Fang, D. (2018) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2018.07.016 · Cited by 158
Design concepts of an aircraft wing: composite and morphing airfoil with auxetic structures
Budarapu, P. R., B, S. S. Y., & Natarajan, R. (2016) · Frontiers of Structural and Civil Engineering · doi:10.1007/s11709-016-0352-z · Cited by 150
Shape memory polymer hexachiral auxetic structures with tunable stiffness
Rossiter, J. M., TAKASHIMA, K., Scarpa, F. L., Walters, P., & Mukai, T. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/4/045007 · Cited by 131
Mechanical properties of hierarchical anti-tetrachiral metastructures
Wu, W., Tao, Y., Xia, Y., Chen, J., Lei, H., Sun, L., & Fang, D. (2017) · Extreme Mechanics Letters · doi:10.1016/j.eml.2017.08.004 · Cited by 124
Self-citationMechanically active materials in three-dimensional mesostructures
Ning, X., Yu, X., Wang, H., Sun, R., Corman, R. E., Li, H., Lee, C. M., Xue, Y., Chempakasseril, A., Yao, Y., et al. (2018) · Science Advances · doi:10.1126/sciadv.aat8313 · Cited by 123
Simultaneous improvements of strength and toughness in topologically interlocked ceramics
Mirkhalaf, M., Zhou, T., & Barthelat, F. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1807272115 · Cited by 116
A novel metamaterial with tension-torsion coupling effect
Zheng, B., Zhong, R., Chen, X., Fu, M., & Hu, L. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107700 · Cited by 107
Large Shape Transforming 4D Auxetic Structures
Wagner, M. A., Chen, T., & Shea, K. (2017) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2017.0027 · Cited by 101
Thermomechanically Triggered Two‐Stage Pattern Switching of 2D Lattices for Adaptive Structures
Yuan, C., Mu, X., Dunn, C. K., Haidar, J., Wang, T., & Qi, H. J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705727 · Cited by 92
Mirkhalaf, M., Sunesara, A., Ashrafi, B., & Barthelat, F. (2018) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2018.08.025 · Cited by 85
Optimal design of low-frequency band gaps in anti-tetrachiral lattice meta-materials
Bacigalupo, A., Gnecco, G., Lepidi, M., & Gambarotta, L. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.09.062 · Cited by 80
Dynamic Response of Chiral Truss-core Assemblies
Spadoni, A., Ruzzene, M., & Scarpa, F. L. (2006) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x06060219 · Cited by 79
Structural and Acoustic Behavior of Chiral Truss-Core Beams
Spadoni, A., & Ruzzene, M. (2006) · Journal of vibration and acoustics · doi:10.1115/1.2202161 · Cited by 79
Focused‐ion‐beam‐based nano‐kirigami: from art to photonics
Li, J., & Liu, Z. (2017) · Nanophotonics · doi:10.1515/nanoph-2018-0117 · Cited by 79
Jiang, Y., & Li, Y. (2017) · Advanced Engineering Materials · doi:10.1002/adem.201700744 · Cited by 78
Special characteristics of tetrachiral honeycombs under large deformation
Zhong, R., Fu, M., Yin, Q., Xu, O., & Hu, L. (2019) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2019.04.020 · Cited by 75
Twistable Origami and Kirigami: from Structure-Guided Smartness to Mechanical Energy Storage
Wang, L., Song, W., & Fang, D. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b17776 · Cited by 65
Mechanics of curved-ligament hexachiral metastructures under planar deformations
Runkel, F., Ramstein, G., Molinari, G., Arrieta, A. F., & Ermanni, P. (2018) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2018.12.001 · Cited by 28
Cited by
Benedetti, M., du Plessis, A., Ritchie, R. O., Dallago, M., Razavi, N., & Berto, F. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100606 · Cited by 788
Self-citationMechanical metamaterials and beyond
Jiao, P., Mueller, J., Raney, J. R., Zheng, X., & Alavi, A. H. (2023) · Nature Communications · doi:10.1038/s41467-023-41679-8 · Cited by 733
A review of artificial neural networks in the constitutive modeling of composite materials
Liu, X., Tian, S., Tao, F., & Yu, W. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109152 · Cited by 475
A review of additive manufacturing of metamaterials and developing trends
Fan, J., Zhang, L., Wei, S., Zhang, Z., Choi, S.-K., Song, B., & Shi, Y. (2021) · Materials Today · doi:10.1016/j.mattod.2021.04.019 · Cited by 440
Metadata
- Authors
- Wu, W., Hu, W., Qian, G., Liao, H., Xu, X., & Berto, F.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2019-10
- Volume
- 180
- Pages
- 107950
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W2952953259
- Cited by
- 733
- References
- 55
- FWCI
- 37.26
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.