The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
Effect of geometry on the mechanical properties of Ti-6Al-4V Gyroid structures fabricated via SLM: A numerical study
Open accessAbstract
Triply Periodic Minimal Surface (TPMS) structures fabricated via Additive Manufacturing (AM) have recently emerged as being appropriate candidates for high-value engineered structures, including porous bio-implants and energy absorbing structures. Among the many TPMS designs, Gyroid structures have demonstrated merits in AM manufacturability, mechanical properties, and permeability in comparison to traditional lattice structures. Gyroid structures are mathematically formulated by geometric factors: surface thickness, sample size, number of surface periods, and the associated isovalue. These factors result in a continuous surface with a topology-specific structural response. Quantifying the effect of these factors on overall structural response requires substantial computational and experimental resources, and little systematic data exists in the literature. Using a numerical approach, cubic Gyroid structures of various designs were simulated under quasi-static compression, using a simulation model verified with experimental data for AM Ti-6Al-4V specimens fabricated by Selective Laser Melting (SLM). The influence of geometric factors on structural response was quantified with OFAT (One Factor At a Time) and Taguchi methods. The results identify the number of cells and surface thickness strongly influence both modulus and compressive strength. These findings were used to theoretically develop a Gyroid structure that imitates both elastic modulus and compressive strength of human cortical bone.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Cellular solids: Structure and properties
Wolcott, M. P. (1990) · Materials Science and Engineering: A · doi:10.1016/0921-5093(90)90295-e · Cited by 5,926
Ashby, M., Evans, A., Fleck, N., Gibson, L., Hutchinson, J., Wadley, H., & Delale, F. (2001) · Applied Mechanics Reviews · doi:10.1115/1.1421119 · Cited by 2,694
Review of selective laser melting: Materials and applications
Yap, C. Y., Chua, C. K., Dong, Z. L., Liu, Z. H., Zhang, D. Q., Loh, L. E., & Sing, S. L. (2015) · Applied Physics Reviews · doi:10.1063/1.4935926 · Cited by 2,353
Wang, X., Xu, S., Zhou, S., Xu, W., Leary, M., Choong, P., Qian, M., Brandt, M., & Xie, Y. M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.012 · Cited by 2,121
Self-citationOlakanmi, E. O., Cochrane, R. F., & Dalgarno, K. W. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.03.002 · Cited by 1,742
SLM lattice structures: Properties, performance, applications and challenges
Maconachie, T., Leary, M., Lozanovski, B., Zhang, X., Qian, M., Faruque, O., & Brandt, M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108137 · Cited by 1,497
Self-citationXu, W., Brandt, M., Sun, S., Elambasseril, J., Liu, Q., Latham, K., Xia, K., & Qian, M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.11.028 · Cited by 1,245
Self-citationBobbert, F. S. L., Lietaert, K., Eftekhari, A. A., Pouran, B., Ahmadi, S. M., Weinans, H., & Zadpoor, A. A. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.02.024 · Cited by 873
Infinite periodic minimal surfaces without self-intersections
Schoen, A. H. (1970) · NASA Technical Reports Server (NASA) · Cited by 827
Evaluations of cellular lattice structures manufactured using selective laser melting
Yan, C., Hao, L., Hussein, A., & Raymont, D. (2012) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2012.06.002 · Cited by 730
Yan, C., Hao, L., Hussein, A., & Young, P. (2015) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.06.024 · Cited by 717
Signal-to-Noise Ratios, Performance Criteria, and Transformations
Box, G. (1988) · Technometrics · doi:10.1080/00401706.1988.10488313 · Cited by 605
Minimal surface scaffold designs for tissue engineering
Kapfer, S. C., Hyde, S. T., Mecke, K., Arns, C. H., & Schröder-Turk, G. E. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.06.012 · Cited by 579
Compressive failure modes and energy absorption in additively manufactured double gyroid lattices
Maskery, I., Aboulkhair, N. T., Aremu, A. O., Tuck, C. J., & Ashcroft, I. A. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.04.003 · Cited by 575
Mathematically defined tissue engineering scaffold architectures prepared by stereolithography
Melchels, F. P. W., Bertoldi, K., Gabbrielli, R., Velders, A. H., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.05.068 · Cited by 530
Mosekilde, L., Mosekilde, L., & Danielsen, C. C. (1987) · Bone · doi:10.1016/8756-3282(87)90074-3 · Cited by 492
Leary, M., Mazur, M., Williams, H., Yang, E., Alghamdi, A., Lozanovski, B., Zhang, X., Shidid, D., Farahbod-Sternahl, L., Witt, G., et al. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.06.010 · Cited by 456
Self-citationGyroid cuticular structures in butterfly wing scales: biological photonic crystals
Michielsen, K., & Stavenga, D. G. (2008) · Journal of The Royal Society Interface · doi:10.1098/rsif.2007.1065 · Cited by 424
RAJAGOPALAN, S., & ROBB, R. (2006) · Medical Image Analysis · doi:10.1016/j.media.2006.06.001 · Cited by 392
Mazur, M., Leary, M., Sun, S., Vcelka, M., Shidid, D., & Brandt, M. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7655-4 · Cited by 374
Self-citationAdditive Manufacturing: Making Imagination the Major Limitation
Zhai, Y., Lados, D. A., & LaGoy, J. L. (2014) · JOM · doi:10.1007/s11837-014-0886-2 · Cited by 324
Zhang, X. Z., Leary, M., Tang, H. P., Song, T., & Qian, M. (2018) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2018.05.002 · Cited by 285
Self-citationYánez, A., Cuadrado, A., Martel, O., Afonso, H., & Monopoli, D. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.11.050 · Cited by 252
ASME 2013 Conference on Smart Materials, Adaptive Structures and Intelligent Systems
Asme, A. S. O. M. E. (2013) · HAL (Le Centre pour la Communication Scientifique Directe) · doi:10.1115/smasis2013 · Cited by 252
Biomechanics of human movement and its clinical applications
Lu, T., & Chang, C. (2012) · The Kaohsiung Journal of Medical Sciences · doi:10.1016/j.kjms.2011.08.004 · Cited by 218
A TPMS-based method for modeling porous scaffolds for bionic bone tissue engineering
Shi, J., Zhu, L., Li, L., Li, Z., Yang, J., & Wang, X. (2018) · Scientific Reports · doi:10.1038/s41598-018-25750-9 · Cited by 207
Blanquer, S. B. G., Werner, M., Hannula, M., Sharifi, S., Lajoinie, G. P. R., Eglin, D., Hyttinen, J., Poot, A. A., & Grijpma, D. W. (2017) · Biofabrication · doi:10.1088/1758-5090/aa6553 · Cited by 195
Mechanical Properties of Dried Defatted Spongy Bone
Lindahl, O. (1976) · Acta Orthopaedica Scandinavica · doi:10.3109/17453677608998966 · Cited by 194
Mechanical properties and histology of cortical bone from younger and older men
Evans, F. G. (1976) · The Anatomical Record · doi:10.1002/ar.1091850102 · Cited by 188
Age variations in the properties of human tibial travecular bone
Ding, M. L., Dalstra, M., Danielsen, C. C., Kabel, J., Hvid, I., & Linde, F. (1997) · Journal of Bone and Joint Surgery - British Volume · doi:10.1302/0301-620x.79b6.7538 · Cited by 181
High specific strength and stiffness structures produced using selective laser melting
Challis, V. J., Xu, X., Zhang, L., Roberts, A. P., Grotowski, J. F., & Sercombe, T. B. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.05.064 · Cited by 177
Compressive behaviour of gyroid lattice structures for human cancellous bone implant applications
Yánez, A., Herrera, A., Martel, O., Monopoli, D., & Afonso, H. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.06.016 · Cited by 174
Challis, V. J., Roberts, A. P., Grotowski, J. F., Zhang, L., & Sercombe, T. B. (2010) · Advanced Engineering Materials · doi:10.1002/adem.201000154 · Cited by 134
High-Value SLM Aerospace Components: From Design to Manufacture
Brandt, M., Sun, S., Leary, M., Feih, S., Elambasseril, J., & Liu, Q. C. (2013) · Advanced materials research · doi:10.4028/www.scientific.net/amr.633.135 · Cited by 133
Self-citationAdditive manufacturing. General principles. Terminology
(2016) · doi:10.3403/30331378u · Cited by 125
Material properties of femoral cancellous bone in axial loading: Part I: Time independent properties
Rohlmann, A., Zilch, H., Bergmann, G., & Kölbel, R. (1980) · Archives of Orthopaedic and Trauma Surgery · doi:10.1007/bf00450930 · Cited by 115
Nanostructured Calcite Single Crystals with Gyroid Morphologies
Finnemore, A. S., Scherer, M. R. J., Langford, R., Mahajan, S., Ludwigs, S., Meldrum, F. C., & Steiner, U. (2009) · Advanced Materials · doi:10.1002/adma.200900615 · Cited by 112
Energy absorptive properties of human trabecular bone specimens during axial compression
Linde, F., Hvid, I., & Pongsoipetch, B. (1989) · Journal of Orthopaedic Research® · doi:10.1002/jor.1100070316 · Cited by 106
3D-printed porous bed structures
Fee, C. J. (2017) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2017.07.003 · Cited by 78
Just-in-time Design and Additive Manufacture of Patient-specific Medical Implants
Shidid, D., Leary, M., Choong, P., & Brandt, M. (2016) · Physics Procedia · doi:10.1016/j.phpro.2016.08.002 · Cited by 71
Self-citationSarker, A., Tran, N. L., Rifai, A., Elambasseril, J., Brandt, M., Williams, R. J., Leary, M., & Fox, K. E. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.05.043 · Cited by 70
Self-citationSarker, A., Tran, N. L., Rifai, A., Brandt, M., Tran, P. A., Leary, M., Fox, K. E., & Williams, R. J. (2019) · Materialia · doi:10.1016/j.mtla.2019.100250 · Cited by 69
Self-citationTime dependent response of architectured Neovius foams
Khan, K. A., & Al‐Rub, R. K. A. (2017) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2017.03.017 · Cited by 57
Cortical Bone in Man 1.Variation of the Amount and Density with Age and Sex
Lindahl, O., & Lindgren, Å. G. H. (1967) · Acta Orthopaedica Scandinavica · doi:10.3109/17453676708989627 · Cited by 56
Cited by
Benedetti, M., du Plessis, A., Ritchie, R. O., Dallago, M., Razavi, N., & Berto, F. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100606 · Cited by 788
Properties and applications of additively manufactured metallic cellular materials: A review
du Plessis, A., Razavi, N., Benedetti, M., Murchio, S., Leary, M., Watson, M., Bhate, D., & Berto, F. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100918 · Cited by 623
Self-citation
Metadata
- Authors
- Yang, E., Leary, M., Lozanovski, B., Downing, D., Mazur, M., Sarker, A., Khorasani, A., Jones, A., Maconachie, T., Bateman, S., Easton, M., Qian, M., Choong, P., & Brandt, M.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2019-12
- Volume
- 184
- Pages
- 108165
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W2970542337
- Cited by
- 261
- References
- 46
- FWCI
- 11.72
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.