The DOI matches its Crossref record; 65 of the 65 references it cites were found in a registry or an index.
Review of high-strength aluminium alloys for additive manufacturing by laser powder bed fusion
Open accessAbstract
Laser powder bed fusion (LPBF) is one of the major additive manufacturing techniques that industries have adopted to produce complex metal components. The scientific and industrial literature from the past few years reveals that there is a growing demand for the development of high-strength aluminium alloys for LPBF. However, some major challenges remain for high-strength aluminium alloys, especially in relation to printability and the control of defects. Possible strategies that have been identified to achieve high strength with printability include the adaptation of existing high-strength cast and wrought alloys to LPBF, the design of new alloys specifically for LPBF, and the development of aluminium-based composites to achieve unique combinations of properties and processability. Whilst review papers exist for aluminium alloys in general for the related work up to 2019, the purpose of this paper is to review the latest developments related to high-strength aluminium alloys for LPBF up to early 2022, including alloy and process design strategies to achieve high strength without cracking. It aims to provide fresh insights into the current state-of-the-art based on a review of extensive yield strength data for a wide spectrum of aluminium alloys and tempers that have been studied and/or commercialised for LPBF.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D printing of high-strength aluminium alloys
Martin, J. H., Yahata, B. D., Hundley, J. M., Mayer, J. A., Schaedler, T. A., & Pollock, T. M. (2017) · Nature · doi:10.1038/nature23894 · Cited by 2,950
Material-structure-performance integrated laser-metal additive manufacturing
Gu, D., Shi, X., Poprawe, R., Bourell, D. L., Setchi, R., & Zhu, J. (2021) · Science · doi:10.1126/science.abg1487 · Cited by 1,703
Aboulkhair, N. T., Simonelli, M., Parry, L., Ashcroft, I., Tuck, C., & Hague, R. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100578 · Cited by 1,552
Zhang, J., Song, B., Wei, Q., Bourell, D., & Shi, Y. (2019) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2018.09.004 · Cited by 1,205
Li, X., Ji, G., Chen, Z., Addad, A., Wu, Y. X., Wang, H., Vleugels, J., Humbeeck, J. V., & Kruth, J. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.02.062 · Cited by 893
Prashanth, K. G., Scudino, S., Klauss, H. J., Surreddi, K. B., Löber, L., Wang, Z., Chaubey, A. K., Kühn, U., & Eckert, J. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.10.023 · Cited by 803
Changing the alloy composition of Al7075 for better processability by selective laser melting
Montero-Sistiaga, M. L., Mertens, R., Vrancken, B., Wang, X., Hooreweder, B. V., Kruth, J., & Humbeeck, J. V. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2016.08.003 · Cited by 590
Inoculation Treatment of an Additively Manufactured 2024 Aluminium Alloy with Titanium Nanoparticles
Tan, Q., Zhang, J., Sun, Q., Fan, Z., Li, G., Yin, Y. J., Liu, Y., & Zhang, M. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.06.026 · Cited by 527
Selective laser melting of a high strength Al Mn Sc alloy: Alloy design and strengthening mechanisms
Jia, Q., Rometsch, P. A., Kürnsteiner, P., Qi, C., Huang, A. J., Weyland, M., BOURGEOIS, L. N., & Wu, X. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.04.014 · Cited by 497
Self-citationMetallurgy, mechanistic models and machine learning in metal printing
DebRoy, T., Mukherjee, T., Wei, H. L., Elmer, J. W., & Milewski, J. O. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-00236-1 · Cited by 497
Zhang, H., Zhu, H., Nie, X., Yin, J., Hu, Z., & Zeng, X. (2017) · Scripta Materialia · doi:10.1016/j.scriptamat.2017.02.036 · Cited by 477
Kimura, T., & Nakamoto, T. (2016) · Materials & Design · doi:10.1016/j.matdes.2015.10.065 · Cited by 404
Multi-scale defects in powder-based additively manufactured metals and alloys
Fu, J., Li, H., Song, X., & Fu, M. W. (2022) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2022.02.015 · Cited by 391
Schmidtke, K., Palm, F., Hawkins, A., & Emmelmann, C. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.03.047 · Cited by 389
Laser powder bed fusion for metal additive manufacturing: perspectives on recent developments
Sing, S. L., & Yeong, W. Y. (2020) · Virtual and Physical Prototyping · doi:10.1080/17452759.2020.1779999 · Cited by 379
Columnar to equiaxed transition in Al-Mg(-Sc)-Zr alloys produced by selective laser melting
Yang, K. V., Shi, Y., Palm, F., Wu, X., & Rometsch, P. A. (2017) · Scripta Materialia · doi:10.1016/j.scriptamat.2017.10.021 · Cited by 365
Self-citationTradowsky, U., White, J., Ward, R. M., Read, N., Reimers, W., & Attallah, M. M. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.066 · Cited by 332
Rao, H., Giet, S., Yang, K., Wu, X., & Davies, C. H. J. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.07.009 · Cited by 331
Self-citationAdditive Manufacturing for the Aerospace Industry
(2019) · Elsevier eBooks · doi:10.1016/c2017-0-00712-7 · Cited by 331
Kellens, K., Baumers, M., Gutowski, T. G., Flanagan, W., Lifset, R., & Duflou, J. R. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12629 · Cited by 310
Uddin, S. Z., Murr, L. E., Terrazas, C. A., Morton, P. A., Roberson, D. A., & Wicker, R. B. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.05.047 · Cited by 310
New Aluminum Alloys Specifically Designed for Laser Powder Bed Fusion: A Review
Aversa, A., Marchese, G., Saboori, A., Bassini, E., Manfredi, D., Biamino, S., Ugues, D., Fino, P., & Lombardi, M. (2019) · Materials · doi:10.3390/ma12071007 · Cited by 293
Aluminum with dispersed nanoparticles by laser additive manufacturing
Lin, T.-C., Cao, C., Sokoluk, M., Jiang, L., Wang, X., Schoenung, J. M., Lavernia, E. J., & Li, X. (2019) · Nature Communications · doi:10.1038/s41467-019-12047-2 · Cited by 291
Moghimian, P., Poirié, T., Habibnejad-Korayem, M., Arreguin-Zavala, J., Kroeger, J. H., Marion, F., & Larouche, F. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102017 · Cited by 291
Thermal post-processing of AlSi10Mg parts produced by Selective Laser Melting using recycled powder
Maamoun, A. H., Elbestawi, M., Dosbaeva, G. K., & Veldhuis, S. C. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.03.014 · Cited by 270
Grain Refinement of Alloys in Fusion-Based Additive Manufacturing Processes
Zhang, D., Prasad, A., Bermingham, M. J., Todaro, C. J., Benoit, M. J., Patel, M. N., Qiu, D., StJohn, D. H., Qian, M., & Easton, M. A. (2020) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-020-05880-4 · Cited by 270
Plotkowski, A., Sisco, K. D., Bahl, S., Shyam, A., Yang, Y., Allard, L. F., Nandwana, P., Rossy, A. M., & Dehoff, R. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.07.014 · Cited by 266
Zhou, S., Su, Y., Wang, H., Enz, J., Ebel, T., & Yan, M. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101458 · Cited by 252
A novel crack-free Ti-modified Al-Cu-Mg alloy designed for selective laser melting
Zhang, J., Gao, J., Song, B., Zhang, L., Han, C., Cai, C., Zhou, K., & Shi, Y. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2020.101829 · Cited by 249
Yang, K. V., Rometsch, P., Davies, C. H. J., Huang, A., & Wu, X. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.05.026 · Cited by 243
Self-citationMetal Alloys for Fusion‐Based Additive Manufacturing
Zhang, D., Sun, S., Qiu, D., Gibson, M. A., Dargusch, M. S., Brandt, M., Qian, M., & Easton, M. A. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201700952 · Cited by 236
Jia, Q., Zhang, F., Rometsch, P., Li, J., Mata, J., Weyland, M., Bourgeois, L., Sui, M., & Wu, X. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.04.015 · Cited by 209
Self-citationGrain refinement mechanisms in additively manufactured nano-functionalized aluminum
Martin, J. H., Yahata, B., Mayer, J., Mone, R., Stonkevitch, E., Miller, J., O'Masta, M. R., Schaedler, T., Hundley, J., Callahan, P., et al. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.09.043 · Cited by 192
Xiao, Y., Bian, Z., Wu, Y. X., Ji, G., Li, Y. Q., Minglang, L. I., Lian, Q., Chen, Z., Addad, A., & Wang, H. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.05.279 · Cited by 191
A review of particulate-reinforced aluminum matrix composites fabricated by selective laser melting
Wang, P., Eckert, J., Prashanth, K. G., Wu, M.-W., Kaban, I., Xi, L., & Scudino, S. (2020) · Transactions of Nonferrous Metals Society of China · doi:10.1016/s1003-6326(20)65357-2 · Cited by 190
Tan, Q., Zhang, J., Mo, N., Fan, Z., Yin, Y., Bermingham, M., Liu, Y., Huang, H., & Zhang, M.-X. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2019.101034 · Cited by 189
Mechanical Properties of SLM-Printed Aluminium Alloys: A Review
Ponnusamy, P., Rashid, R. A. R., Masood, S. H., Ruan, D., & Palanisamy, S. (2020) · Materials · doi:10.3390/ma13194301 · Cited by 189
Takata, N., Liu, M., Kodaira, H., Suzuki, A., & Kobashi, M. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101152 · Cited by 186
Microstructure and mechanical property considerations in additive manufacturing of aluminum alloys
Ding, Y., Muñiz-Lerma, J. A., Trask, M., Chou, S. C., Walker, A., & Brochu, M. (2016) · MRS Bulletin · doi:10.1557/mrs.2016.214 · Cited by 161
Towards a high strength aluminium alloy development methodology for selective laser melting
Jia, Q., Rometsch, P., Cao, S., Zhang, K., & Wu, X. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107775 · Cited by 159
Self-citationSelective Laser Melting of Aluminum and Its Alloys
Wang, Z., Ummethala, R., Singh, N., Tang, S., Suryanarayana, C., Eckert, J., & Prashanth, K. G. (2020) · Materials · doi:10.3390/ma13204564 · Cited by 148
Mair, P., Kaserer, L., Braun, J., Weinberger, N., Letofsky‐Papst, I., & Leichtfried, G. J. (2020) · Materials Science and Engineering A · doi:10.1016/j.msea.2020.140209 · Cited by 144
Xiao, Y., Chen, H., Bian, Z., Sun, T., Ding, H., Yang, Q., Wu, Y. X., Lian, Q., Chen, Z., & Wang, H. (2021) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2021.08.030 · Cited by 143
Design and Tailoring of Alloys for Additive Manufacturing
Pollock, T. M., Clarke, A. J., & Babu, S. S. (2020) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-020-06009-3 · Cited by 138
The origins for tensile properties of selective laser melted aluminium alloy A357
Rao, J. H., Zhang, Y., Fang, X., Chen, Y., Wu, X., & Davies, C. H. J. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.08.007 · Cited by 123
Self-citationControl of thermally stable core-shell nano-precipitates in additively manufactured Al-Sc-Zr alloys
Kürnsteiner, P., Bajaj, P., Gupta, A., Wilms, M. B., Weisheit, A., Li, X., Leinenbach, C., Gault, B., Jägle, E. A., & Raabe, D. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100910 · Cited by 123
He, P., Kong, H., Liu, Q., Ferry, M., Kruzic, J. J., & Li, X. (2021) · Materials Science and Engineering A · doi:10.1016/j.msea.2021.141025 · Cited by 106
Li, X., Shi, S., Han, S., Xiaogang, H., Zhu, Q., Lu, H., Li, W., Yusheng, S., & Hui, D. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101326 · Cited by 93
Qi, Y., Zhang, H., Nie, X., Hu, Z., Zhu, H., & Zeng, X. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101346 · Cited by 93
Laser Powder-Bed Fusion of Ceramic Particulate Reinforced Aluminum Alloys: A Review
Minasyan, T., & Hussainova, I. (2022) · Materials · doi:10.3390/ma15072467 · Cited by 79
Li, X., Li, G., Zhang, M., & Zhu, Q. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102400 · Cited by 72
Bayoumy, D., Kwak, K., Boll, T., Dietrich, S., Schliephake, D., Huang, J., Yi, J., Takashima, K., Wu, X., Zhu, Y., et al. (2021) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2021.06.042 · Cited by 68
Self-citationAn additively manufactured AlCuMnZr alloy microstructure and tensile mechanical properties
Shyam, A., Plotkowski, A., Bahl, S., Sisco, K. D., Allard, L. F., Yang, Y., Haynes, J. A., & Dehoff, R. (2020) · Materialia · doi:10.1016/j.mtla.2020.100758 · Cited by 66
Wu, Y., Zhang, T., Chen, C., Hosseini, S. R. E., Zhang, X., & Zhou, K. (2021) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2021.163243 · Cited by 57
Remarkable thermal stability of the Al-Ca-Ni-Mn alloy manufactured by laser-powder bed fusion
Шуркин, П. К., Letyagin, N. V., Yakushkova, A. I., Самошина, М. Е., Ozherelkov, D. Y., & Akopyan, Т. К. (2020) · Materials Letters · doi:10.1016/j.matlet.2020.129074 · Cited by 47
Salandari-Rabori, A., Wang, P., Dong, Q., & Fallah, V. (2020) · Materials Science and Engineering A · doi:10.1016/j.msea.2020.140620 · Cited by 47
Sun, S., Zheng, L., Liu, Y., Liu, J., & Zhang, H. (2015) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2015.110 · Cited by 38
Hyer, H., Zhou, L., Park, S., Huynh, T., Mehta, A., Thapliyal, S., Mishra, R. S., & Sohn, Y. (2021) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2021.06.023 · Cited by 38
Review: Materials Ecosystem for Additive Manufacturing Powder Bed Fusion Processes
Poorganji, B., Ott, E. A., Kelkar, R., Wessman, A. E., & Jamshidinia, M. (2019) · JOM · doi:10.1007/s11837-019-03892-z · Cited by 36
Additive manufacturing of metal matrix composites via nanofunctionalization
Martin, J. H., Yahata, B. D., Clough, E. C., Mayer, J. A., Hundley, J. M., & Schaedler, T. A. (2018) · MRS Communications · doi:10.1557/mrc.2018.95 · Cited by 26
Liu, M., Takata, N., Suzuki, A., Kobashi, M., & Kato, M. (2021) · Additive Manufacturing Letters · doi:10.1016/j.addlet.2021.100008 · Cited by 22
Colera, X. G., Chalker, S., Bilton, M. W., Sutcliffe, C. J., & Chalker, P. R. (2020) · Materialia · doi:10.1016/j.mtla.2020.100590 · Cited by 21
Solaimani, S., Parandian, A., & Nabiollahi, N. (2021) · Sustainability · doi:10.3390/su131910775 · Cited by 17
Sert, E., Öchsner, A. Ö., Hitzler, L., Werner, E. A., & Merkel, M. (2019) · Advanced structured materials · doi:10.1007/978-3-030-30355-6_14 · Cited by 10
Present and Future Sustainability Development of 3D Metal Printing
Rezaie, B., Anderson, A., Gallegos, S., & Azarmi, F. (2021) · European Journal of Sustainable Development Research · doi:10.21601/ejosdr/11132 · Cited by 9
Metadata
- Authors
- Rometsch, P. A., Zhu, Y., Wu, X., & Huang, A.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2022-07
- Volume
- 219
- Pages
- 110779
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W4281562759
- Cited by
- 330
- References
- 65
- FWCI
- 23.12
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.