The DOI matches its Crossref record; 171 of the 171 references it cites were found in a registry or an index.
Additive manufactured high entropy alloys: A review of the microstructure and properties
Open accessAbstract
High entropy alloys (HEAs) are promising multi-component alloys with unique combination of novel microstructures and excellent properties. However, there are still certain limitations in the fabrication of HEAs by conventional methods. Additive manufactured HEAs exhibit optimized microstructures and improved properties, and there is a significantly increasing trend on the application of additive manufacturing (AM) techniques in producing HEAs in recent years. This review summarizes the additive manufactured HEAs in terms of microstructure characteristics, mechanical and some functional properties reported so far, and provides readers with a fundamental understanding of this research field. We first briefly review the application of AM methods and the applied HEAs systems, then the microstructure including the relative density, residual stress, grain structure, texture and dislocation networks, element distribution, precipitations and the influence of post-treatment on the microstructural evolution, next the mechanical properties consisting of hardness, tensile properties, compressive properties, cryogenic and high-temperature properties, fatigue properties, creep behavior, post-treatment effect and the strengthening mechanisms analysis. Thereafter, emerging functional properties of additive manufactured HEAs, namely the corrosion resistance, oxidation behaviors, magnetic properties as well as hydrogen storage properties are discussed, respectively. Finally, the current challenges and future work are proposed based on the current research status of this topic.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,130
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys
Senkov, O. N., Wilks, G. B., Scott, J. M., & Miracle, D. B. (2011) · Intermetallics · doi:10.1016/j.intermet.2011.01.004 · Cited by 3,239
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
3D printing of high-strength aluminium alloys
Martin, J. H., Yahata, B. D., Hundley, J. M., Mayer, J. A., Schaedler, T. A., & Pollock, T. M. (2017) · Nature · doi:10.1038/nature23894 · Cited by 2,950
Wu, Z., Bei, H., Pharr, G. M., & George, E. P. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.08.026 · Cited by 2,134
Residual stresses in selective laser sintering and selective laser melting
Mercelis, P., & Kruth, J. (2006) · Rapid Prototyping Journal · doi:10.1108/13552540610707013 · Cited by 2,015
Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures
Gludovatz, B., Hohenwarter, A., Thurston, K. V. S., Bei, H., Wu, Z., George, E. P., & Ritchie, R. O. (2016) · Nature Communications · doi:10.1038/ncomms10602 · Cited by 1,930
Metal Additive Manufacturing: A Review of Mechanical Properties
Lewandowski, J. J., & Seifi, M. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032024 · Cited by 1,722
Wu, B., Pan, Z., Ding, D., Cuiuri, D., Li, H., Xu, J., & Norrish, J. (2018) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.08.001 · Cited by 1,577
Wang, W.-R., Wang, W.-L., Wang, S.-C., Tsai, Y.-C., Lai, C.-H., & Yeh, J.-W. (2012) · Intermetallics · doi:10.1016/j.intermet.2012.03.005 · Cited by 1,517
Microstructure and wear behavior of AlxCo1.5CrFeNi1.5Tiy high-entropy alloys
Chuang, M.-H., Tsai, M.-H., Wang, W.-R., Lin, S.-J., & Yeh, J.-W. (2011) · Acta Materialia · doi:10.1016/j.actamat.2011.06.041 · Cited by 1,481
Laplanche, G., Kostka, A., Reinhart, C., Hunfeld, J., Eggeler, G., & George, E. P. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.02.036 · Cited by 1,379
Thompson, S. M., Bian, L., Shamsaei, N., & Yadollahi, A. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.07.001 · Cited by 1,179
Gu, D., Hagedorn, Y.-C., Meiners, W., Meng, G., Batista, R. J. S., Wissenbach, K., & Poprawe, R. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.04.006 · Cited by 1,089
Rappaz, M., Drezet, J. M., & Gremaud, M. (1999) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-999-0334-z · Cited by 1,070
Gorsse, S., Hutchinson, C., Gouné, M., & Banerjee, R. (2017) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2017.1361305 · Cited by 920
Microstructure and elevated temperature properties of a refractory TaNbHfZrTi alloy
Senkov, O. N., Scott, J. M., Senkova, S. V., Meisenkothen, F., Miracle, D. B., & Woodward, C. F. (2012) · Journal of Materials Science · doi:10.1007/s10853-012-6260-2 · Cited by 916
Mechanical performance of the Al x CoCrCuFeNi high-entropy alloy system with multiprincipal elements
Tong, C.-J., Chen, M.-R., Yeh, J.-W., Lin, S.-J., Chen, S.-K., Shun, T.-T., & Chang, S.-Y. (2005) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-005-0218-9 · Cited by 904
Shi, Y., Yang, B., Xie, X., Brechtl, J., Dahmen, K. A., & Liaw, P. K. (2017) · Corrosion Science · doi:10.1016/j.corsci.2017.02.019 · Cited by 887
Fatigue behavior of Al0.5CoCrCuFeNi high entropy alloys
Hemphill, M. A., Yuan, T., Wang, G. Y., Yeh, J. W., Tsai, C. W., Chuang, A., & Liaw, P. K. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.06.046 · Cited by 811
Gokuldoss, P. K., Kolla, S., & Eckert, J. (2017) · Materials · doi:10.3390/ma10060672 · Cited by 804
Progress in additive manufacturing on new materials: A review
Li, N., Huang, S., Zhang, G., Qin, R., Liu, W., Xiong, H., Shi, G., & Blackburn, J. (2019) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2018.09.002 · Cited by 776
Manufacture by selective laser melting and mechanical behavior of commercially pure titanium
Attar, H., Calin, M., Zhang, L. C., Scudino, S., & Eckert, J. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.11.038 · Cited by 744
Parry, L., Ashcroft, I. A., & Wildman, R. D. (2016) · Additive Manufacturing · doi:10.1016/j.addma.2016.05.014 · Cited by 739
Zhu, Z. G., Nguyen, Q. B., Ng, F. L., An, X. H., Liao, X. Z., Liaw, P. K., Nai, S. M. L., & Wei, J. (2018) · Scripta Materialia · doi:10.1016/j.scriptamat.2018.05.015 · Cited by 653
Youssef, K. M., Zaddach, A. J., Niu, C., Irving, D. L., & Koch, C. C. (2015) · Materials Research Letters · doi:10.1080/21663831.2014.985855 · Cited by 645
Ultrastrong Medium‐Entropy Single‐Phase Alloys Designed via Severe Lattice Distortion
Sohn, S. S., da Silva, A. K., Ikeda, Y., Körmann, F., Lu, W., Choi, W. S., Gault, B., Ponge, D., Neugebauer, J., & Raabe, D. (2018) · Advanced Materials · doi:10.1002/adma.201807142 · Cited by 632
Lattice distortion in a strong and ductile refractory high-entropy alloy
Lee, C., Song, G., Gao, M. C., Feng, R., Chen, P., Brechtl, J., Chen, Y., An, K., Guo, W., Poplawsky, J. D., et al. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.08.053 · Cited by 622
Jafari, D., Vaneker, T. H. J., & Gibson, I. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.109471 · Cited by 605
A study on the residual stress during selective laser melting (SLM) of metallic powder
Liu, Y., Yang, Y., & Wang, D. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-8466-y · Cited by 573
Li, R., Niu, P., Yuan, T., Cao, P., Chen, C., & Zhou, K. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.02.298 · Cited by 572
The evolution of the deformation substructure in a Ni-Co-Cr equiatomic solid solution alloy
Miao, J., Slone, C. E., Smith, T. M., Niu, C., Bei, H., Ghazisaeidi, M., Pharr, G. M., & Mills, M. J. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.04.033 · Cited by 539
Fatigue of structures and materials in the 20th century and the state of the art
Schijve, J. (2003) · International Journal of Fatigue · doi:10.1016/s0142-1123(03)00051-3 · Cited by 524
Hydrogen absorption by Laves phase related BCC solid solution
Akiba, E., & Iba, H. (1998) · Intermetallics · doi:10.1016/s0966-9795(97)00088-5 · Cited by 504
Li, Z., Tasan, C. C., Springer, H., Gault, B., & Raabe, D. (2017) · Scientific Reports · doi:10.1038/srep40704 · Cited by 488
Recent Advances on High‐Entropy Alloys for 3D Printing
Han, C., Fang, Q., Shi, Y., Tor, S. B., Chua, C. K., & Zhou, K. (2020) · Advanced Materials · doi:10.1002/adma.201903855 · Cited by 486
Additive manufacturing of high entropy alloys: A practical review
Ostovari Moghaddam, A., Shaburova, N. A., Samodurova, M. N., Abdollahzadeh, A., & Trofimov, E. A. (2021) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2020.11.029 · Cited by 474
Fatigue behavior of a wrought Al0.5CoCrCuFeNi two-phase high-entropy alloy
Tang, Z., Yuan, T., Tsai, C.-W., Yeh, J.-W., Lundin, C. D., & Liaw, P. K. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.07.004 · Cited by 450
Slone, C. E., Miao, J., George, E. P., & Mills, M. J. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.12.015 · Cited by 393
Gorr, B., Azim, M., Christ, H.-J., Mueller, T., Schliephake, D., & Heilmaier, M. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.11.012 · Cited by 386
Laser powder bed fusion for metal additive manufacturing: perspectives on recent developments
Sing, S. L., & Yeong, W. Y. (2020) · Virtual and Physical Prototyping · doi:10.1080/17452759.2020.1779999 · Cited by 379
A review on wire and arc additive manufacturing of titanium alloy
Lin, Z., Song, K., & Yu, X. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.08.018 · Cited by 374
Ding, D., Pan, Z. S., Cuiuri, D., & Li, H. (2015) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2015.01.003 · Cited by 363
Insights into the phase diagram of the CrMnFeCoNi high entropy alloy
Laurent-Brocq, M., Akhatova, A., Perrière, L., Chebini, S., Sauvage, X., Leroy, E., & Champion, Y. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.01.068 · Cited by 361
Microstructure and residual stress of laser rapid formed Inconel 718 nickel-base superalloy
Liu, F., Lin, X., Yang, G., Song, M., Chen, J., & Huang, W. (2010) · Optics & Laser Technology · doi:10.1016/j.optlastec.2010.06.015 · Cited by 348
Corrosion of Additively Manufactured Alloys: A Review
Sander, G., Tan, J., Balan, P., Gharbi, O., Feenstra, D. R., Singer, L., Thomas, S., Kelly, R. G., Scully, J. R., & Birbilis, N. (2018) · Corrosion · doi:10.5006/2926 · Cited by 344
Joseph, J., Jarvis, T., Wu, X., Stanford, N., Hodgson, P., & Fabijanic, D. M. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.02.072 · Cited by 343
Borkar, T., Gwalani, B., Choudhuri, D., Mikler, C. V., Yannetta, C. J., Chen, X., Ramanujan, R. V., Styles, M. J., Gibson, M. A., & Banerjee, R. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.06.025 · Cited by 322
Maskery, I., Aboulkhair, N. T., Corfield, M. R., Tuck, C., Clare, A. T., Leach, R. K., Wildman, R. D., Ashcroft, I. A., & Hague, R. J. M. (2016) · Materials Characterization · doi:10.1016/j.matchar.2015.12.001 · Cited by 317
Feuerbacher, M., Heidelmann, M., & Thomas, C. (2015) · Materials Research Letters · doi:10.1080/21663831.2014.951493 · Cited by 308
Xu, Z., Zhang, H., Du, X., He, Y., Luo, H., Song, G., Mao, L., Zhou, T., & Wang, L. (2020) · Corrosion Science · doi:10.1016/j.corsci.2020.108954 · Cited by 308
Wang, R., Zhang, K., Davies, C., & Wu, X. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.10.138 · Cited by 306
Tong, Z., Ren, X., Jiao, J., Zhou, W., Ren, Y., Ye, Y., Larson, E. A., & Gu, J. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.01.213 · Cited by 304
Zhou, Y. J., Zhang, Y., Wang, Y. L., & Chen, G. L. (2007) · Materials Science and Engineering: A · doi:10.1016/j.msea.2006.11.049 · Cited by 279
High-throughput synthesis of Mo-Nb-Ta-W high-entropy alloys via additive manufacturing
Moorehead, M. J., Bertsch, K. M., Niezgoda, M. C., Parkin, C., Elbakhshwan, M. S., Sridharan, K., Zhang, C., Thoma, D. J., & Couet, A. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108358 · Cited by 279
The effect of atmosphere on the structure and properties of a selective laser melted Al–12Si alloy
Wang, X. J., Zhang, L., Fang, M., & Sercombe, T. B. (2014) · Materials Science and Engineering A · doi:10.1016/j.msea.2014.01.012 · Cited by 277
Kunce, I., Polanski, M., & Bystrzycki, J. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.05.071 · Cited by 273
Kunce, I., Polanski, M., & Bystrzycki, J. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.02.067 · Cited by 272
High-entropy alloys fabricated via powder metallurgy. A critical review
Torralba, J. M., Alvaredo, P., & García-Junceda, A. (2019) · Powder Metallurgy · doi:10.1080/00325899.2019.1584454 · Cited by 270
Additive Manufacturing of High-Entropy Alloys: A Review
Chen, S., Tong, Y., & Liaw, P. K. (2018) · Entropy · doi:10.3390/e20120937 · Cited by 257
Phase transformations of HfNbTaTiZr high-entropy alloy at intermediate temperatures
Chen, S. Y., Tong, Y., Tseng, K.-K., Yeh, J.-W., Poplawsky, J. D., Wen, J. G., Gao, M. C., Kim, G., Chen, W., Ren, Y., et al. (2019) · Scripta Materialia · doi:10.1016/j.scriptamat.2018.08.032 · Cited by 254
Nygård, M. M., Ek, G., Karlsson, D., Sørby, M. H., Sahlberg, M., & Hauback, B. C. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.06.002 · Cited by 254
Chew, Y., Bi, G. J., Zhu, Z. G., Ng, F. L., Weng, F., Liu, S. B., Nai, S. M. L., & Lee, B. Y. (2019) · Materials Science and Engineering: A · doi:10.1016/j.msea.2018.12.005 · Cited by 249
Niu, P. D., Li, R. D., Yuan, T. C., Zhu, S. Y., Chen, C., Wang, M. B., & Huang, L. (2019) · Intermetallics · doi:10.1016/j.intermet.2018.10.018 · Cited by 247
Lin, D., Xu, L., Jing, H., Han, Y., Zhao, L., & Minami, F. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101058 · Cited by 235
Lee, S. Y., Byeon, S., Kim, H. S., Jin, H., & Lee, S. (2021) · Materials & Design · doi:10.1016/j.matdes.2020.109260 · Cited by 226
High-Entropy Alloys in Hexagonal Close-Packed Structure
Gao, M. C., Zhang, B., Guo, S. M., Qiao, J. W., & Hawk, J. A. (2016) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-015-3091-1 · Cited by 221
Effect of temperature on the fatigue-crack growth behavior of the high-entropy alloy CrMnFeCoNi
Thurston, K. V. S., Gludovatz, B., Hohenwarter, A., Laplanche, G., George, E. P., & Ritchie, R. O. (2017) · Intermetallics · doi:10.1016/j.intermet.2017.05.009 · Cited by 215
Additively manufactured CoCrFeNiMn high-entropy alloy via pre-alloyed powder
Wang, P., Huang, P., Ng, F. L., Sin, W. J., Lu, S., Nai, M. L. S., Dong, Z., & Wei, J. (2019) · Materials & Design · doi:10.1016/j.matdes.2018.107576 · Cited by 215
Kunce, I., Polański, M., Karczewski, K., Płociński, T., & Kurzydłowski, K. J. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.05.144 · Cited by 206
Karthik, G. M., Panikar, S., Ram, G. D. J., & Kottada, R. S. (2017) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.10.038 · Cited by 205
Shiratori, H., Fujieda, T., Yamanaka, K., Koizumi, Y., Kuwabara, K., Kato, T., & Chiba, A. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.01.019 · Cited by 203
Shen, Q., Kong, X., & Chen, X. (2021) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2020.10.037 · Cited by 201
Haase, C., Tang, F., Wilms, M. B., Weisheit, A., & Hallstedt, B. (2017) · Materials Science and Engineering: A · doi:10.1016/j.msea.2017.01.099 · Cited by 200
Zhou, R., Liu, Y., Zhou, C., Li, S., Wu, W., Song, M. J., Liu, B., Liang, X., & Liaw, P. K. (2018) · Intermetallics · doi:10.1016/j.intermet.2018.01.002 · Cited by 199
Kim, Y.-K., Choe, J., & Lee, K.-A. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.07.106 · Cited by 197
Fujieda, T., Shiratori, H., Kuwabara, K., Kato, T., Yamanaka, K., Koizumi, Y., & Chiba, A. (2015) · Materials Letters · doi:10.1016/j.matlet.2015.06.046 · Cited by 194
Zhu, Z. G., An, X. H., Lu, W. J., Li, Z. M., Ng, F. L., Liao, X. Z., Ramamurty, U., Nai, S. M. L., & Wei, J. (2019) · Materials Research Letters · doi:10.1080/21663831.2019.1650131 · Cited by 191
Song, B., Dong, S., Liu, Q., Liao, H., & Coddet, C. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.08.085 · Cited by 189
Joseph, J., Hodgson, P., Jarvis, T., Wu, X., Stanford, N., & Fabijanic, D. M. (2018) · Materials Science and Engineering: A · doi:10.1016/j.msea.2018.07.036 · Cited by 188
3D ink-extrusion additive manufacturing of CoCrFeNi high-entropy alloy micro-lattices
Kenel, C., Casati, N. P. M., & Dunand, D. C. (2019) · Nature Communications · doi:10.1038/s41467-019-08763-4 · Cited by 183
Wang, H., Zhu, Z. G., Chen, H., Wang, A. G., Liu, J. Q., Liu, H. W., Zheng, R. K., Nai, S. M. L., Primig, S., Babu, S. S., et al. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.07.006 · Cited by 181
Mishra, R. S., & Thapliyal, S. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.109640 · Cited by 181
Dobbelstein, H., Gurevich, E. L., George, E. P., Ostendorf, A., & Laplanche, G. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2018.10.042 · Cited by 179
Wu, W., Zhou, R., Wei, B., Ni, S., Liu, Y., & Song, M. J. (2018) · Materials Characterization · doi:10.1016/j.matchar.2018.08.019 · Cited by 177
Fabricating CoCrFeMnNi high entropy alloy via selective laser melting in-situ alloying
Chen, P., Li, S., Zhou, Y., Yan, M., & Attallah, M. M. (2020) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2020.01.002 · Cited by 175
Sun, Z., Tan, X. P., Descoins, M., Mangelinck, D., Tor, S. B., & Lim, C. S. (2019) · Scripta Materialia · doi:10.1016/j.scriptamat.2019.04.036 · Cited by 173
Kuwabara, K., Shiratori, H., Fujieda, T., Yamanaka, K., Koizumi, Y., & Chiba, A. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.06.006 · Cited by 170
Luo, S., Gao, P., Yu, H., Yang, J., Wang, Z., & Zeng, X. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.08.290 · Cited by 170
Weng, F., Chew, Y., Zhu, Z., Yao, X., Wang, L., Ng, F. L., Liu, S., & Bi, G. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101202 · Cited by 169
Additive Manufacturing of High-Entropy Alloys by Laser Processing
Ocelík, V., Janssen, N., Smith, S. N., & De Hosson, J. T. M. (2016) · JOM · doi:10.1007/s11837-016-1888-z · Cited by 166
On the machining of selective laser melting CoCrFeMnNi high-entropy alloy
Guo, J., Goh, M., Zhu, Z., Lee, X., Nai, M. L. S., & Wei, J. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.05.012 · Cited by 165
Song, M., Zhou, R., Gu, J., Wang, Z., Ni, S., & Liu, Y. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2019.100498 · Cited by 162
Tong, Z., Liu, H., Jiao, J., Zhou, W., Yu, Y., & Ren, X. (2020) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2020.116806 · Cited by 161
Qiu, Z., Yao, C., Feng, K., Li, Z., & Chu, P. K.-H. (2018) · International Journal of Lightweight Materials and Manufacture · doi:10.1016/j.ijlmm.2018.02.001 · Cited by 160
Zhang, C., Zhu, J., Zheng, H., Li, H., Liu, S., & Cheng, G. J. (2020) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ab9ead · Cited by 158
Li, X. (2017) · Advanced Engineering Materials · doi:10.1002/adem.201700874 · Cited by 151
Borkar, T., Chaudhary, V., Gwalani, B., Choudhuri, D., Mikler, C. V., Soni, V., Alam, T., Ramanujan, R. V., & Banerjee, R. (2017) · Advanced Engineering Materials · doi:10.1002/adem.201700048 · Cited by 148
Hydrogen storage properties of the refractory Ti–V–Zr–Nb–Ta multi-principal element alloy
Montero, J., Ek, G., Laversenne, L., Nassif, V., Zepon, G., Sahlberg, M., & Zlotea, C. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2020.155376 · Cited by 146
Shi, Y., Yang, B., Rack, P. D., Guo, S., Liaw, P. K., & Zhao, Y. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.109018 · Cited by 145
Zeng, Y., Man, M., Bai, K., & Zhang, Y. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.109532 · Cited by 145
Li, J., Xiang, S., Luan, H., Amar, A., Liu, X., Lu, S., Zeng, Y., Le, G., Wang, X., Qu, F., et al. (2019) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2019.05.062 · Cited by 142
Katz‐Demyanetz, A., Popov, V. V., Kovalevsky, A. A., Safranchik, D., & Koptyug, A. V. (2019) · Manufacturing Review · doi:10.1051/mfreview/2019003 · Cited by 141
Agrawal, P., Thapliyal, S., Nene, S. S., Mishra, R. S., McWilliams, B., & Cho, K. C. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101098 · Cited by 138
Formation of a Huesler-like L21 phase in a CoCrCuFeNiAlTi high-entropy alloy
Choudhuri, D., Alam, T., Borkar, T., Gwalani, B., Mantri, A. S., Srinivasan, S. G., Gibson, M. A., & Banerjee, R. (2015) · Scripta Materialia · doi:10.1016/j.scriptamat.2014.12.006 · Cited by 137
Choudhuri, D., Gwalani, B., Gorsse, S., Mikler, C. V., Ramanujan, R. V., Gibson, M. A., & Banerjee, R. (2016) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.09.023 · Cited by 127
Lin, W.-C., Chang, Y.-J., Hsu, T.-H., Gorsse, S., Sun, F., Furuhara, T., & Yeh, A. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101601 · Cited by 127
Luo, S., Zhao, C., Su, Y., Liu, Q., & Wang, Z. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100925 · Cited by 123
Xu, Z., Zhang, H., Li, W., Mao, A., Wang, L., Song, G., & He, Y. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.06.012 · Cited by 115
Kim, Y., Yang, S., & Lee, K. (2020) · Scientific Reports · doi:10.1038/s41598-020-65073-2 · Cited by 115
Park, J. M., Choe, J., Park, H. K., Son, S., Jung, J., Kim, T., Yu, J., Kim, J. G., & Kim, H. S. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101333 · Cited by 114
Atomic Structure Modeling of Multi-Principal-Element Alloys by the Principle of Maximum Entropy
Wang, S. (2013) · Entropy · doi:10.3390/e15125536 · Cited by 112
Ultra-strong nanostructured CrMnFeCoNi high entropy alloys
Xiao, L., Zheng, Z., Guo, S., Huang, P., & Fei, W. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108895 · Cited by 111
Materials and manufacturing renaissance: Additive manufacturing of high-entropy alloys
Kim, J., Wakai, A., & Moridi, A. (2020) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2020.140 · Cited by 108
Kim, Y., Yu, J., Kim, H. S., & Lee, K. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.108638 · Cited by 107
Vikram, R. J., Murty, B. S., Fabijanic, D. M., & Suwas, S. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2020.154034 · Cited by 106
Efficient production of a high-performance dispersion strengthened, multi-principal element alloy
Smith, T. M., Thompson, A. C., Gabb, T. P., Bowman, C. L., & Kantzos, C. (2020) · Scientific Reports · doi:10.1038/s41598-020-66436-5 · Cited by 106
Mohanty, A., Sampreeth, J. K., Bembalge, O. B., Hascoët, J.-Y., Marya, S. K., Immanuel, R. J., & Panigrahi, S. K. (2019) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2019.125028 · Cited by 104
Huang, L., Sun, Y., Amar, A., Wu, C., Liu, X., Le, G., Wang, X., Wu, J., Li, K., Jiang, C., et al. (2020) · Vacuum · doi:10.1016/j.vacuum.2020.109875 · Cited by 104
Gwalani, B., Soni, V., Waseem, O. A., Mantri, S. A., & Banerjee, R. (2019) · Optics & Laser Technology · doi:10.1016/j.optlastec.2019.01.009 · Cited by 101
Kim, Y., Kim, M., & Lee, K. (2021) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2021.04.030 · Cited by 100
Nature of the interfaces between the constituent phases in the high entropy alloy CoCrCuFeNiAl
Welk, B. A., Williams, R. E. A., Viswanathan, G. B., Gibson, M. A., Liaw, P. K., & Fraser, H. L. (2013) · Ultramicroscopy · doi:10.1016/j.ultramic.2013.06.006 · Cited by 99
Microstructures and hydrogen storage properties of La Ni Fe V Mn alloys
Kunce, I., Polański, M., & Czujko, T. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.09.039 · Cited by 99
Achieving high strength and ductility in nitrogen-doped refractory high-entropy alloys
Wang, R., Tang, Y., Lei, Z., Ai, Y., Tong, Z., Li, S., Ye, Y., & Bai, S. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.110356 · Cited by 99
Niu, P., Li, R., Zhu, S., Wang, M., Chen, C., & Yuan, T. (2020) · Optics & Laser Technology · doi:10.1016/j.optlastec.2020.106147 · Cited by 98
High Entropy Alloys Manufactured by Additive Manufacturing
Torralba, J. M., & Campos, M. (2020) · Metals · doi:10.3390/met10050639 · Cited by 97
Dobbelstein, H., George, E. P., Gurevich, E. L., Kostka, A., Ostendorf, A., & Laplanche, G. (2020) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/abcca8 · Cited by 95
A precipitation-strengthened high-entropy alloy for additive manufacturing
Zhou, K., Wang, Z., He, F., Liu, S., Li, J., Kai, J., & Wang, J. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101410 · Cited by 93
Kim, Y., Baek, M.-S., Yang, S., & Lee, K. (2021) · Additive manufacturing · doi:10.1016/j.addma.2020.101832 · Cited by 92
Selective electron beam melting of Al0.5CrMoNbTa0.5 high entropy alloys using elemental powder blend
Popov, V. V., Katz‐Demyanetz, A., Koptyug, A. V., & Bamberger, M. (2019) · Heliyon · doi:10.1016/j.heliyon.2019.e01188 · Cited by 91
Binder jetting of the AlCoCrFeNi alloy
Karlsson, D., Lindwall, G., Lundbäck, A., Amnebrink, M., Boström, M., Riekehr, L., Schuisky, M., Sahlberg, M., & Jansson, U. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.02.010 · Cited by 88
The oxidation behavior of the quinary FeCoNiCrSix high-entropy alloys
Kai, W., Cheng, F. P., Liao, C.-C., Li, C. C., Huang, R. T., & Kai, J. (2017) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2017.06.017 · Cited by 87
Enhanced tensile yield strength in laser additively manufactured Al0.3CoCrFeNi high entropy alloy
Nartu, M. S. K. K. Y., Alam, T., Dasari, S., Mantri, S. A., Gorsse, S., Siller, H. R., Dahotre, N. B., & Banerjee, R. (2019) · Materialia · doi:10.1016/j.mtla.2019.100522 · Cited by 86
Peng, S., Mooraj, S., Feng, R., Liu, L., Ren, J., Liu, Y., Kong, F., Xiao, Z., Zhu, C. Y., Liaw, P. K., et al. (2020) · Scripta Materialia · doi:10.1016/j.scriptamat.2020.08.028 · Cited by 83
Zhang, Y., Chen, X., Jayalakshmi, S., Singh, R. A., Deev, V. B., & Prusov, E. S. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2020.157625 · Cited by 82
Additive manufactured new hybrid high entropy alloys derived from the AlCoFeNiSmTiVZr system
Sarswat, P. K., Sarkar, S., Murali, A., Huang, W., Tan, W., & Free, M. L. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2018.12.300 · Cited by 81
Pegues, J., Melia, M., Puckett, R., Whetten, S., Argibay, N., & Kustas, A. B. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101598 · Cited by 77
Additive manufacturing of high-entropy alloys by thermophysical calculations and in situ alloying
Cagirici, M., Wang, P., Ng, F. L., Nai, M. L. S., Ding, J., & Wei, J. (2021) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2021.03.038 · Cited by 77
Yang, X., Zhou, Y. J., Xi, S., Chen, Z., Wei, P., He, C., Li, T., Gao, Y., & Wu, H. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.138394 · Cited by 76
Kim, D., Jo, Y. H., Park, J. M., Choi, W.-M., Kim, H. S., Lee, B., Sohn, S. S., & Lee, S. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.152111 · Cited by 75
Ewald, S., Kies, F., Hermsen, S., Voshage, M., Haase, C., & Schleifenbaum, J. H. (2019) · Materials · doi:10.3390/ma12101706 · Cited by 73
Combinatorial Alloy Design by Laser Additive Manufacturing
Knoll, H., Ocylok, S., Weisheit, A., Springer, H., Jägle, E. A., & Raabe, D. (2016) · steel research international · doi:10.1002/srin.201600416 · Cited by 70
Dada, M. O., Popoola, A. P. I., Mathe, N., Pityana, S. L., Adeosun, S. O., & Aramide, F. O. (2021) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2021.158777 · Cited by 70
Compositionally graded high entropy alloy with a strong front and ductile back
Gwalani, B., Gangireddy, S., Shukla, S., Yannetta, C. J., Valentin, S. G., Mishra, R. S., & Banerjee, R. (2019) · Materials Today Communications · doi:10.1016/j.mtcomm.2019.100602 · Cited by 68
Corrosion Behavior of Selectively Laser Melted CoCrFeMnNi High Entropy Alloy
Ren, J., Mahajan, C., Liu, L., Follette, D., Chen, W., & Mukherjee, S. (2019) · Metals · doi:10.3390/met9101029 · Cited by 68
The additive manufacture processing and machinability of CrMnFeCoNi high entropy alloy
Litwa, P., Hernández-Nava, E., Guan, D., Goodall, R., & Wika, K. K. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.109380 · Cited by 68
Zhao, D., Yang, Q., Wang, D., Yan, M., Wang, P., Jiang, M. G., Liu, C., Diao, D., Lao, C., Chen, Z., et al. (2020) · Virtual and Physical Prototyping · doi:10.1080/17452759.2020.1840783 · Cited by 65
Su, Y., Luo, S., & Wang, Z. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2020.155823 · Cited by 64
Pratt, P., Felicelli, S. D., Wang, L., & Hubbard, C. R. (2008) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-008-9660-9 · Cited by 63
Kim, Y., Yang, S., & Lee, K. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101543 · Cited by 63
Guo, L., Gu, J., Gan, B., Ni, S., Bi, Z., Wang, Z., & Song, M. J. (2021) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2021.158892 · Cited by 63
Savinov, R., Wang, Y., & Shi, J. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.04.018 · Cited by 58
Fabrication of porous CoCrFeMnNi high entropy alloy using binder jetting additive manufacturing
Xu, Z., Zhu, Z., Wang, P., Meenashisundaram, G. K., Nai, M. L. S., & Wei, J. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101441 · Cited by 56
Yang, C., Bian, H., Aoyagi, K., Hayasaka, Y., Yamanaka, K., & Chiba, A. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.110248 · Cited by 56
A scrap-tolerant alloying concept based on high entropy alloys
Barnett, M. R., Senadeera, M., Fabijanic, D. M., Shamlaye, K. F., Joseph, J., Kada, S. R., Rana, S., Gupta, S., & Venkatesh, S. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.09.027 · Cited by 55
Zhang, X., Li, R., Huang, L., Amar, A., Wu, C., Le, G., Liu, X., Guan, D., Yang, G., & Li, J. (2021) · Vacuum · doi:10.1016/j.vacuum.2021.110111 · Cited by 55
Role of Cu addition in enhancing strength-ductility synergy in transforming high entropy alloy
Agrawal, P., Gupta, S., Shukla, S., Nene, S. S., Thapliyal, S., Toll, M. P., & Mishra, R. S. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.110487 · Cited by 54
Wang, J., Chen, Y., Zhang, Y., Dai, W., Xu, Q., Li, W., & Liu, Y. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.110277 · Cited by 52
Cai, Y., Li, X., Xia, H., Cui, Y., Manladan, S. M., Zhu, L., Shan, M., Sun, D. Q., Wang, T., Lv, X., et al. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.10.022 · Cited by 49
Strengthening mechanisms in high-entropy alloys: Perspectives for alloy design
Rivera-Díaz-del-Castillo, P. E. J., & Fu, H. (2018) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2018.328 · Cited by 47
Zhang, Y., Shen, Q., Chen, X., Jayalakshmi, S., Singh, R. A., Konovalov, S. V., Deev, V. B., & Prusov, E. S. (2021) · Nanomaterials · doi:10.3390/nano11030721 · Cited by 41
Liu, J., Li, J., Du, X., Tong, Y., Wang, R., He, D., Cai, Z., & Wang, H. (2021) · Materials · doi:10.3390/ma14164512 · Cited by 35
Li, J., Luan, H., Zhou, L., Amar, A., Li, R., Huang, L., Liu, X., Le, G., Wang, X., Wu, J., et al. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108999 · Cited by 33
Texture evolution in a CrMnFeCoNi high-entropy alloy manufactured by laser powder bed fusion
He, X., Wang, H., Zhu, Z., Wang, L. Z., Liu, J. Q., Haghdadi, N., Nai, M. L. S., Huang, J., Primig, S., Ringer, S. P., et al. (2022) · Journal of Materials Science · doi:10.1007/s10853-022-07025-x · Cited by 31
Ng, C. K., Bai, K., Wuu, D., Lau, K. B., Lee, J. J., Cheong, A. K. H., Wei, F., Cheng, B., Wang, P., Tan, D. C. C., et al. (2022) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2022.164288 · Cited by 29
Optimization of the corrosion property of a high entropy alloy using response surface methodology
Dada, M. O., Popoola, A. P. I., Aramide, F. O., Mathe, N., & Pityana, S. L. (2020) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.05.618 · Cited by 25
Sarswat, P. K., Smith, T., Sarkar, S., Murali, A., & Free, M. L. (2020) · Materials · doi:10.3390/ma13133001 · Cited by 25
Cited by
Gao, G., Zhu, G., Chen, X., Sun, Z., & Cabot, A. (2023) · ACS Nano · doi:10.1021/acsnano.3c05810 · Cited by 278
Metadata
- Authors
- Zhang, W., Chabok, A., Kooi, B. J., & Pei, Y.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2022-08
- Volume
- 220
- Pages
- 110875
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W4283394810
- Cited by
- 255
- References
- 171
- FWCI
- 17.83
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.