The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Additive manufacturing of multi-directional preforms for composites: opportunities and challenges
Open accessAbstract
Current additive manufacturing methods present the potential to construct net-shape structures with complicated architectures, thus eliminating the need for multi-step processing and fasteners/joints. Combined with these features is the ability to ascribe material properties at the sub-millimeter scale, inspiring multi-material, functionally graded designs. These features make additive manufacturing an attractive option for composite materials development. In an effort to extend this family of technologies beyond nano- and micro-composites, we explore the additive manufacture of multi-directional composite preforms. This exercise has served to highlight the aspects of additive manufacturing critical to composite and general materials processing, as well as to demonstrate the high fidelity between modeled and additively manufactured structures. Within the scope of composites development, we review the state-of-the-art and discuss challenges facing the broad adoption of additive manufacturing for directionally reinforced composites processing.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on polymer nanofibers by electrospinning and their applications in nanocomposites
Huang, Z.-M., Zhang, Y.-Z., Kotaki, M., & Ramakrishna, S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00178-7 · Cited by 7,556
Ultralight, ultrastiff mechanical metamaterials
Zheng, X., Lee, H., Weisgraber, T. H., Shusteff, M., DeOtte, J., Duoss, E. B., Kuntz, J. D., Biener, M. M., Ge, Q., Jackson, J. A., et al. (2014) · Science · doi:10.1126/science.1252291 · Cited by 2,308
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
Direct Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740
3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
Highly oriented carbon fiber–polymer composites via additive manufacturing
Tekinalp, H. L., Kunc, V., Velez-Garcia, G. M., Duty, C. E., Love, L. J., Naskar, A. K., Blue, C. A., & Ozcan, S. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.10.009 · Cited by 1,514
The impact resistance of composite materials — a review
Cantwell, W. J., & Morton, J. (1991) · Composites · doi:10.1016/0010-4361(91)90549-v · Cited by 1,465
Comprehensive composite materials
Kelly, A., & Zweben, C. (1999) · Materials Today · doi:10.1016/s1369-7021(99)80033-9 · Cited by 1,352
3D Printing of Interdigitated Li‐Ion Microbattery Architectures
Sun, K., Wei, T., Ahn, B. Y., Seo, J. Y., Dillon, S. J., & Lewis, J. A. (2013) · Advanced Materials · doi:10.1002/adma.201301036 · Cited by 1,341
Progress in Additive Manufacturing and Rapid Prototyping
Kruth, J.-P., Leu, M. C., & Nakagawa, T. (1998) · CIRP Annals · doi:10.1016/s0007-8506(07)63240-5 · Cited by 1,331
Omnidirectional Printing of Flexible, Stretchable, and Spanning Silver Microelectrodes
Ahn, B. Y., Duoss, E. B., Motala, M. J., Guo, X., Park, S.-I., Xiong, Y., Yoon, J., Nuzzo, R. G., Rogers, J. A., & Lewis, J. A. (2009) · Science · doi:10.1126/science.1168375 · Cited by 1,191
Printing and Prototyping of Tissues and Scaffolds
Derby, B. (2012) · Science · doi:10.1126/science.1226340 · Cited by 1,108
Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations
Huang, Y., Leu, M. C., Mazumder, J., & Donmez, A. (2015) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028725 · Cited by 947
Short fiber reinforced composites for fused deposition modeling
Zhong, W., Li, F., Zhang, Z., Song, L., & Li, Z. (2001) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(00)01810-4 · Cited by 721
Conformal Printing of Electrically Small Antennas on Three‐Dimensional Surfaces
Adams, J. J., Duoss, E. B., Malkowski, T. F., Motala, M. J., Ahn, B. Y., Nuzzo, R. G., Bernhard, J. T., & Lewis, J. A. (2011) · Advanced Materials · doi:10.1002/adma.201003734 · Cited by 630
Effect of Layer Orientation on Mechanical Properties of Rapid Prototyped Samples
Es-Said, O. S., Foyos, J., Noorani, R., Mendelson, M., Marloth, R., & Pregger, B. A. (2000) · Materials and Manufacturing Processes · doi:10.1080/10426910008912976 · Cited by 577
Development of new metal/polymer materials for rapid tooling using Fused deposition modelling
Masood, S. H., & Song, W. Q. (2004) · Materials & Design · doi:10.1016/j.matdes.2004.02.009 · Cited by 543
Direct writing in three dimensions
Lewis, J. A., & Gratson, G. M. (2004) · Materials Today · doi:10.1016/s1369-7021(04)00344-x · Cited by 507
Thermo-mechanical properties of a highly filled polymeric composites for Fused Deposition Modeling
Nikzad, M., Masood, S. H., & Sbarski, I. (2011) · Materials & Design · doi:10.1016/j.matdes.2011.01.056 · Cited by 503
The importance of carbon fiber to polymer additive manufacturing
Love, L. J., Kunc, V., Rios, O., Duty, C. E., Elliott, A. M., Post, B. K., Smith, R. J., & Blue, C. A. (2014) · Journal of Materials Research · doi:10.1557/jmr.2014.212 · Cited by 493
Development of controlled porosity polymer-ceramic composite scaffolds via fused deposition modeling
Kalita, S. J., Bose, S., Hosick, H. L., & Bandyopadhyay, A. (2003) · Materials Science and Engineering: C · doi:10.1016/s0928-4931(03)00052-3 · Cited by 488
Nanofiber‐reinforced polymers prepared by fused deposition modeling
Shofner, M. L., Lozano, K., Rodríguez‐Macías, F. J., & Barrera, E. V. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12496 · Cited by 484
Additive manufacturing (AM) and nanotechnology: promises and challenges
Ivanova, O., Williams, C., & Campbell, T. (2013) · Rapid Prototyping Journal · doi:10.1108/rpj-12-2011-0127 · Cited by 461
Heat transfer and material flow during laser assisted multi-layer additive manufacturing
Manvatkar, V., De, A., & DebRoy, T. (2014) · Journal of Applied Physics · doi:10.1063/1.4896751 · Cited by 362
Some recent advances in the fabrication and design of three-dimensional textile preforms: a review
Kamiya, R., Cheeseman, B. A., Popper, P., & Chou, T.-W. (2000) · Composites Science and Technology · doi:10.1016/s0266-3538(99)00093-7 · Cited by 300
Self-citationNet shaped high performance oxide ceramic parts by selective laser melting
Yves-Christian, H., Jan, W., Wilhelm, M., Konrad, W., & Reinhart, P. (2010) · Physics Procedia · doi:10.1016/j.phpro.2010.08.086 · Cited by 276
3D printing of multifunctional nanocomposites
Campbell, T. A., & Ivanova, O. S. (2013) · Nano Today · doi:10.1016/j.nantod.2012.12.002 · Cited by 261
Processing of a Polyamide-12/carbon nanofibre composite by laser sintering
Goodridge, R. D., Shofner, M. L., Hague, R. J. M., McClelland, M., Schlea, M. R., Johnson, R. B., & Tuck, C. J. (2011) · Polymer Testing · doi:10.1016/j.polymertesting.2010.10.011 · Cited by 234
Lin, D., Richard Liu, C., & Cheng, G. J. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.07.038 · Cited by 188
Fiber reinforcement during 3D printing
Christ, S., Schnabel, M., Vorndran, E., Groll, J., & Gbureck, U. (2015) · Materials Letters · doi:10.1016/j.matlet.2014.10.065 · Cited by 183
Shofner, M. L., Rodrı́guez-Macı́as, F. J., Vaidyanathan, R., & Barrera, E. V. (2003) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2003.07.002 · Cited by 176
Heat transfer and fluid flow in additive manufacturing
Raghavan, A., Wei, H., Palmer, T. A., & DebRoy, T. (2013) · Journal of Laser Applications · doi:10.2351/1.4817788 · Cited by 159
Melt blowing: General equation development and experimental verification
Uyttendaele, M. A. J., & Shambaugh, R. L. (1990) · AIChE Journal · doi:10.1002/aic.690360203 · Cited by 132
Challenges and Opportunities in Design for Additive Manufacturing
Seepersad, C. C. (2014) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2013.0006 · Cited by 126
Three-Dimensional Printing of Complex Structures: Man Made or toward Nature?
Lin, D. L., Nian, Q., Deng, B., Jin, S., Hu, Y., Wang, W., & Cheng, G. J. (2014) · ACS Nano · doi:10.1021/nn504894j · Cited by 90
Leach, N. (2014) · Architectural Design · doi:10.1002/ad.1840 · Cited by 72
Campbell, T. A., Tibbits, S., & Garrett, B. N. (2014) · Scientific American · doi:10.1038/scientificamerican1114-60 · Cited by 63
Holmes, L. R., & Riddick, J. C. (2013) · JOM · doi:10.1007/s11837-013-0828-4 · Cited by 50
Cited by
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Tofail, S. A. M., Koumoulos, E. P., Bandyopadhyay, A., Bose, S., O’Donoghue, L., & Charitidis, C. (2018) · Materials Today · doi:10.1016/j.mattod.2017.07.001 · Cited by 2,136
Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite
Goh, G. D., Yap, Y. L., Agarwala, S., & Yeong, W. Y. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800271 · Cited by 621
Light-weighting in aerospace component and system design
Zhu, L., Li, N., & Childs, P. R. N. (2018) · Propulsion and Power Research · doi:10.1016/j.jppr.2018.04.001 · Cited by 583
Yang, Y., Song, X., Li, X., Chen, Z., Zhou, C., Zhou, Q., & Chen, Y. (2018) · Advanced Materials · doi:10.1002/adma.201706539 · Cited by 538
Characterization of 3D printed long fibre reinforced composites
Justo, J., Távara, L., García-Guzmán, L., & París, F. (2018) · Composite Structures · doi:10.1016/j.compstruct.2017.11.052 · Cited by 473
Metadata
- Authors
- Quan, Z., Wu, A., Keefe, M., Qin, X., Yu, J., Suhr, J., Byun, J.-H., Kim, B.-S., & Chou, T.-W.
- Venue
- Materials Today
- Publisher
- Elsevier BV
- Published
- 2015-11
- Volume
- 18
- Issue
- 9
- Pages
- 503-512
- ISSN
- 1369-7021 (ISSN-L)
- OpenAlex
- W301248758
- Cited by
- 324
- References
- 38
- FWCI
- 25.27
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.