The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Multistage work hardening assisted by multi-type twinning in ultrafine-grained heterostructural eutectic high-entropy alloys
Open accessAbstract
High strength of materials usually comes with low ductility due to the lost or short-lived strain hardening. Here, we uncover a sequentially-activated multistage strain hardening (SMSH) that allows for sustained and effective strain-hardening capability in strong ultrafine-grained eutectic high-entropy alloy (EHEA). Consequently, exceptional ductility is realized in an ultrafine-grained EHEA, accompanied with high ultimate strength. We demonstrate that the SMSH is derived from a coordinated three-level design on structural heterogeneity, grain-size control, and intragranular composition modification, which enables the sequential activation of stress-dependent multiple hardening mechanisms. Furthermore, despite the well-known low twinning propensity due to ultrafine grains and medium-to-high stacking fault energies of prototype EHEAs, our coordinated design sequentially activates three types of deformation twinning to assist this SMSH. This work sheds light on the SMSH effect assisted by multi-type twinning previously unexpected in ultrafine-grained EHEAs, and thereby represents a promising route for improving ductility of high-strength materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,130
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
Self-citationA fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
Li, Z., Pradeep, K. G., Deng, Y., Raabe, D., & Tasan, C. C. (2016) · Nature · doi:10.1038/nature17981 · Cited by 4,071
The conflicts between strength and toughness
Ritchie, R. O. (2011) · Nature Materials · doi:10.1038/nmat3115 · Cited by 3,989
High tensile ductility in a nanostructured metal
Wang, Y., Chen, M., Zhou, F., & Ma, E. (2002) · Nature · doi:10.1038/nature01133 · Cited by 2,945
Additively manufactured hierarchical stainless steels with high strength and ductility
Wang, Y. M., Voisin, T., McKeown, J. T., Ye, J., Calta, N. P., Li, Z., Zeng, Z., Zhang, Y., Chen, W., Roehling, T. T., et al. (2018) · Nature Materials · doi:10.1038/nmat5021 · Cited by 2,613
Self-citationEnhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes
Lei, Z., Liu, X., Wu, Y., Wang, H., Jiang, S., Wang, S., Hui, X., Wu, Y., Gault, B., Kontis, P., et al. (2018) · Nature · doi:10.1038/s41586-018-0685-y · Cited by 1,764
A Promising New Class of High-Temperature Alloys: Eutectic High-Entropy Alloys
Lu, Y., Dong, Y., Guo, S., Jiang, L., Kang, H., Wang, T., Wen, B., Wang, Z., Jie, J., Cao, Z., et al. (2014) · Scientific Reports · doi:10.1038/srep06200 · Cited by 1,737
Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys
Yang, T., Zhao, Y. L., Tong, Y., Jiao, Z. B., Wei, J., Cai, J. X., Han, X. D., Chen, D., Hu, A., Kai, J. J., et al. (2018) · Science · doi:10.1126/science.aas8815 · Cited by 1,684
Tuning element distribution, structure and properties by composition in high-entropy alloys
Ding, Q., Zhang, Y., Chen, X., Fu, X., Chen, D., Chen, S., Gu, L., Wei, F., Bei, H., Gao, Y., et al. (2019) · Nature · doi:10.1038/s41586-019-1617-1 · Cited by 1,614
Self-citationPerspective on hetero-deformation induced (HDI) hardening and back stress
Zhu, Y. T., & Wu, X. (2019) · Materials Research Letters · doi:10.1080/21663831.2019.1616331 · Cited by 1,592
Self-citationDeformation twinning in nanocrystalline materials
Zhu, Y. T., Liao, X. Z., & Wu, X. L. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.05.001 · Cited by 1,373
Self-citationSchuh, B., Mendez-Martin, F., Völker, B., George, E. P., Clemens, H., Pippan, R., & Hohenwarter, A. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.06.025 · Cited by 1,323
Deformation Twinning in Nanocrystalline Aluminum
Chen, M. W., Ma, E., Hemker, K. J., Sheng, H. W., Wang, Y., & Cheng, X. M. (2003) · Science · doi:10.1126/science.1083727 · Cited by 1,219
Towards strength–ductility synergy through the design of heterogeneous nanostructures in metals
Ma, E., & Zhu, T. (2017) · Materials Today · doi:10.1016/j.mattod.2017.02.003 · Cited by 1,132
Dislocation network in additive manufactured steel breaks strength–ductility trade-off
Liu, L., Ding, Q., Zhong, Y., Zou, J., Wu, J., Chiu, Y.-L., Li, J., Zhang, Z., Yu, Q., & Shen, Z. (2018) · Materials Today · doi:10.1016/j.mattod.2017.11.004 · Cited by 1,127
Self-citationNanostructured high-strength molybdenum alloys with unprecedented tensile ductility
Liu, G., Zhang, G., Jiang, F., et al. (2013) · Nature Materials · doi:10.1038/nmat3544 · Cited by 1,122
Shi, P., Ren, W., Zheng, T., Ren, Z., Hou, X., Peng, J., Hu, P., Gao, Y., Zhong, Y., & Liaw, P. K. (2019) · Nature Communications · doi:10.1038/s41467-019-08460-2 · Cited by 954
Self-citationDecomposition in multi-component AlCoCrCuFeNi high-entropy alloy
Singh, S., Wanderka, N., Murty, B. S., Glatzel, U., & Banhart, J. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.09.023 · Cited by 872
Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi
Zhang, Z., Mao, M. M., Wang, J., Gludovatz, B., Zhang, Z., Mao, S. X., George, E. P., Yu, Q., & Ritchie, R. O. (2015) · Nature Communications · doi:10.1038/ncomms10143 · Cited by 845
Strategies for improving the sustainability of structural metals
Raabe, D., Tasan, C. C., & Olivetti, E. A. (2019) · Nature · doi:10.1038/s41586-019-1702-5 · Cited by 724
Strong crystal size effect on deformation twinning
Yu, Q., Shan, Z.-W., Li, J., Huang, X., Xiao, L., Sun, J., & Ma, E. (2010) · Nature · doi:10.1038/nature08692 · Cited by 673
Tailoring heterogeneities in high-entropy alloys to promote strength–ductility synergy
Ma, E., & Wu, X. (2019) · Nature Communications · doi:10.1038/s41467-019-13311-1 · Cited by 621
Zhu, Y. T., & Liao, X. (2004) · Nature Materials · doi:10.1038/nmat1141 · Cited by 548
Self-citationYang, M., Yan, D., Yuan, F., Jiang, P., Ma, E., & Wu, X. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1807817115 · Cited by 548
Gutiérrez‐Urrutia, I., & Raabe, D. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.07.018 · Cited by 538
Deformation mechanism in nanocrystalline Al: Partial dislocation slip
Liao, X., Zhou, F., Lavernia, E. J., Srinivasan, S. G., Baskes, M. I., He, D. W., & Zhu, Y. T. (2003) · Applied Physics Letters · doi:10.1063/1.1594836 · Cited by 410
Self-citationWani, I. S., Bhattacharjee, T., Sheikh, S., Bhattacharjee, P. P., Guo, S., & Tsuji, N. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.08.048 · Cited by 408
Slone, C. E., Miao, J., George, E. P., & Mills, M. J. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.12.015 · Cited by 393
Gwalani, B., Gorsse, S., Choudhuri, D., Styles, M., Zheng, Y., Mishra, R. S., & Banerjee, R. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.05.009 · Cited by 286
Choudhuri, D., Gwalani, B., Gorsse, S., Komarasamy, M., Mantri, S. A., Srinivasan, S. G., Mishra, R. S., & Banerjee, R. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.12.010 · Cited by 273
A novel Fe 20 Co 20 Ni 41 Al 19 eutectic high entropy alloy with excellent tensile properties
Jin, X., Zhou, Y., Zhang, L., Du, X., & Li, B. (2018) · Materials Letters · doi:10.1016/j.matlet.2018.01.017 · Cited by 262
Influence of specimen dimensions and strain measurement methods on tensile stress–strain curves
Zhao, Y., Guo, Y. Z., Wei, Q., et al. (2009) · Materials Science and Engineering A · doi:10.1016/j.msea.2009.06.031 · Cited by 245
Sunflower-like Solidification Microstructure in a Near-eutectic High-entropy Alloy
Guo, S. L., Ng, C., & Liu, C. T. (2013) · Materials Research Letters · doi:10.1080/21663831.2013.844737 · Cited by 81
Generalized Stacking Fault Energy of Al-Doped CrMnFeCoNi High-Entropy Alloy
Sun, X., Zhang, H., Li, W., Ding, X., Wang, Y., & Vitos, L. (2019) · Nanomaterials · doi:10.3390/nano10010059 · Cited by 58
Shortt, K., Heruth, D. P., Zhang, N., Wu, W., Singh, S., Li, D., Zhang, L. Q., Wyckoff, G. J., Qi, L. S., Friesen, C. A., et al. (2019) · Scientific Reports · doi:10.1038/s41598-018-37940-6 · Cited by 17
Cited by
Zhu, Y., & Wu, X. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101019 · Cited by 1,537
Self-citationHierarchical crack buffering triples ductility in eutectic herringbone high-entropy alloys
Shi, P., Li, R., Li, Y., Wen, Y., Zhong, Y., Ren, W., Shen, Z., Zheng, T., Peng, J., Liang, X., et al. (2021) · Science · doi:10.1126/science.abf6986 · Cited by 678
Self-citationYang, C., Ren, C., Jia, Y., Wang, G., Li, M., & Lu, W. (2022) · Acta Materialia · doi:10.1016/j.actamat.2021.117431 · Cited by 335
Metadata
- Authors
- Shi, P., Zhong, Y., Li, Y., Ren, W., Zheng, T., Shen, Z., Yang, B., Peng, J., Hu, P., Zhang, Y., Liaw, P. K., & Zhu, Y.
- Venue
- Materials Today
- Publisher
- Elsevier BV
- Published
- 2020-12
- Volume
- 41
- Pages
- 62-71
- ISSN
- 1369-7021 (ISSN-L)
- OpenAlex
- W3097637381
- Cited by
- 464
- References
- 38
- FWCI
- 22.65
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.