Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Sign Up
Cited by 1,007

The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.

Synthesis and characterization of sulfonated poly(ether ether ketone) for proton exchange membranes

Open access
Xing, Peixiang, Robertson, Gilles P, Guiver, Michael D, Mikhailenko, Serguei D, Wang, Keping, Kaliaguine, Serge·2004·Journal of Membrane Science
DOI 10.1016/j.memsci.2003.09.019
Open this paper in CoChat — free account

Abstract

Abstract Series of sulfonated poly(ether ether ketone)s (SPEEKs) were prepared by sulfonation of commercial Victrex ® and Gatone ® PEEK for a comparative study of proton exchange membranes (PEM) intended for fuel cell applications. The degree of sulfonation (DS) of the sulfonated PEEK was determined from deuterated dimethyl sulfoxide (DMSO-d 6 ) solution of the purified polymers using 1 H NMR methods. The second method using a solvent suppression technique, in which DS results were obtained directly from 1 H NMR spectra of SPEEK dissolved in sulfuric acid (non-deuterated) reaction medium was evaluated. The variation between the two methods was determined. The room temperature sulfonation of PEEK, monitored directly by second 1 H NMR method, proceeded rapidly initially, reaching DS∼0.8 within 1 week, but progressed slowly thereafter. A maximum DS of 1.0 was determined after 1 month at ambient temperature (∼22 °C). The thermal properties of SPEEK were characterized by means of DSC and TGA. The mass averaged molecular weights M w of both Victrex ® and Gatone ® PEEK were estimated from intrinsic viscosities measured in sulfuric acid solutions. It was verified that higher temperature (55 °C) did not induce any apparent chain degradation of Victrex ® (or Gatone ® ) PEEK by M w tests. The water uptake and swelling properties of prepared films were studied and the proton conductivities at different temperatures were measured. The conductivities of the SPEEKs were found to increase with increasing DS and temperatures. The effect of film casting solvents on the conductivities is also discussed.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.memsci.2003.09.019

Cites

2 of 2 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 2 references

Research works printed but not linked: 33

  1. Savadogo, 1998, Emerging membranes for electrochemical system. I. Solid polymer membranes for fuel cell systems, J. New Mater. Electr. Syst., 1, 47
  2. Inzelt, 2000, Electron and proton conducting polymers: recent developments and prospects, Electrochim. Acta, 45, 2403, 10.1016/S0013-4686(00)00329-7 · DOI · Paper page
  3. Kreuer, 2001, On the development of proton conducting polymer membranes for hydrogen and methanol fuel cell, J. Membr. Sci., 185, 29, 10.1016/S0376-7388(00)00632-3 · DOI · Paper page
  4. Rikukawa, 2000, Proton-conducting polymer electrolyte membranes based on hydrocarbon polymers, Prog. Polym. Sci., 25, 1463, 10.1016/S0079-6700(00)00032-0 · DOI · Paper page
  5. Alberti, 2001, Polymeric proton conducting membranes for medium temperature fuel cell (110–160°C), J. Membr. Sci., 185, 73, 10.1016/S0376-7388(00)00635-9 · DOI · Paper page
  6. Ulrich, 1998, Sulfonated poly(aryl ether ketone)s, Die Angew. Makromol. Chem., 263, 71, 10.1002/(SICI)1522-9505(19981215)263:1<71::AID-APMC71>3.0.CO;2-N · DOI
  7. Zaidi, 2000, Proton conducting composite membranes from poly(ether ether ketone) and heteropolyacids for fuel cell application, J. Membr. Sci., 173, 17, 10.1016/S0376-7388(00)00345-8 · DOI · Paper page
  8. Wang, 2002, Direct polymerization of sulfonated poly(arylene ether sulfone) random (statistical) copolymers: candidates for new proton exchange membranes, J. Membr. Sci., 197, 231, 10.1016/S0376-7388(01)00620-2 · DOI · Paper page
  9. Genies, 2001, Soluble sulfonated naphthalenic polyimides as materials for proton exchange membranes, Polymer, 42, 359, 10.1016/S0032-3861(00)00384-0 · DOI · Paper page
  10. Guo, 2002, Novel sulfonated polyimides as polyelectrolytes for fuel cell application. 2. Synthesis and proton conductivity of polyimides from 9,9-bis(4-aminophenyl)fluorene-2,7-disulfonic acid, Macromolecules, 35, 6707, 10.1021/ma020260w · DOI
  11. Jones, 2001, Recent advances in the functionalisation of polybenzimidazole and polyetherketone for fuel cell applications, J. Membr. Sci., 185, 41, 10.1016/S0376-7388(00)00633-5 · DOI · Paper page
  12. Asensio, 2002, Proton-conducting polymers based on benzimidazoles and sulfonated benzimidazoles, J. Polym. Sci. A, 40, 3703, 10.1002/pola.10451 · DOI · Paper page
  13. Jin, 1985, A sulphonated poly(aryl ether ether ketone), Br. Polym. J., 17, 4, 10.1002/pi.4980170102 · DOI
  14. Bishop, 1985, Solubility properties of a poly(aryl ether ether ketone) in strong acids, Macromolecules, 18, 86, 10.1021/ma00143a014 · DOI · Paper page
  15. Bailly, 1987, The sodium salts of sulphonated poly(aryl-ether-ether-ketone) (PEEK): preparation characterization, Polymer, 28, 1009, 10.1016/0032-3861(87)90178-9 · DOI
  16. Wang, 1999, Synthesis of poly(ether ether ketone) with high content of sodium sulfonate groups and its membrane characteristics, Polymer, 40, 795, 10.1016/S0032-3861(98)00292-4 · DOI
  17. Wijers, 1998, Support liquid membranes modification with sulphonated poly(ether ether ketone): permeability, selectivity and stability, J. Membr. Sci., 147, 117, 10.1016/S0376-7388(98)00131-8 · DOI
  18. Wilhelm, 2002, Cation permeable membranes from blends of sulfonated poly(ether ether ketone) and poly(ether sulfone), J. Membr. Sci., 199, 167, 10.1016/S0376-7388(01)00695-0 · DOI
  19. Bauer, 2000, Electrochemical characterization of sulfonated polyetherketone membranes, J. New Mater. Electr. Syst., 3, 93
  20. Kobayashi, 1998, Proton-conducting polymers derived from poly(ether-etherketone) and poly(4-phenoxybenzoyl-1,4-phenylene), Solid State Ionics, 106, 219, 10.1016/S0167-2738(97)00512-2 · DOI
  21. Kreuer, 1995, Membrane materials for PEM fuel cells: a microstructural approach, Proc. Electrochem. Soc., 95, 241
  22. Mikhailenko, 2000, Electrical properties of sulfonated polyether ether ketone/polyetherimide blend membranes doped with inorganic acids, J. Polym. Sci. B, 38, 1386, 10.1002/(SICI)1099-0488(20000515)38:10<1386::AID-POLB160>3.0.CO;2-4 · DOI
  23. Manea, 2002, Characterization of polymer blends of polyethersulfone/sulfonated polysulfone and polyethersulfone/sulfonated polyetheretherketone for direct methanol fuel cell applications, J. Membr. Sci., 206, 443, 10.1016/S0376-7388(01)00787-6 · DOI · Paper page
  24. D. Daoust, J. Devaux, P. Godard, A. Jonas, R. Legras, in: H. Kausch (Ed.), Advanced Thermoplastic Composites—Characterization and Processing, Carl Hanser, Munich, 1992, Chapter 1.
  25. Ogawa, 1985, Polyaromatic ether-ketones ether-ketone-sulfones having various hydrophilic groups, J. Polym. Sci. A, 23, 1231
  26. J. Devaux, D. Delimoy, D. Daoust, R. Legras, J.P. Mercier, C. Strazielle, E. Nield, On the molecular weight determination of a poly(aryl ether ether ketone) (PEEK), Polymer 26 (1985). · DOI
  27. Daoust, 2001, Mechanism kinetics of poly(ether ether ketone) (PEEK) sulfonation in concentrated sulfuric acid at room temperature. Part 1. Qualitative comparison between polymer and monomer model compound sulfonation, Polym. Int., 50, 917, 10.1002/pi.720 · DOI
  28. Daoust, 2001, Mechanism kinetics of poly(ether ether ketone) (PEEK) sulfonation in concentrated sulfuric acid at room temperature. Part 2. Qualitative interpretation of model compound sulfonation, Polym. Int., 50, 925, 10.1002/pi.718 · DOI
  29. Shibuya, 1994, A kinetic study of PEEK sulfonation in concentrated sulfuric acid by ultraviolet-visible spectroscopy, Polymer, 35, 3237, 10.1016/0032-3861(94)90128-7 · DOI
  30. Huang, 2001, Sulfonation of poly(ether ether ketone) (PEEK): kinetic study characterization, J. Appl. Polym. Sci., 82, 2651, 10.1002/app.2118 · DOI
  31. Luo, 1995, Thermal degradation of sulfonated poly(aryl ether ether ketone), J. Anal. Appl. Pyrol., 34, 229, 10.1016/0165-2370(95)00890-Q · DOI
  32. Kaliaguine, 2003, Properties of SPEEK based PEMs for fuel cell application, Catal. Today, 82, 213, 10.1016/S0920-5861(03)00235-9 · DOI · Paper page
  33. Robertson, 2003, Casting solvent interactions with sulfonated poly(ether ether ketone) during proton exchange membrane fabrication, J. Membr. Sci., 219, 113, 10.1016/S0376-7388(03)00193-5 · DOI

Cited by

Metadata

Authors
Xing, P., Robertson, G. P., Guiver, M. D., Mikhailenko, S. D., Wang, K., & Kaliaguine, S.
Venue
Journal of Membrane Science
Publisher
Elsevier BV
Published
2004-02
Volume
229
Issue
1-2
Pages
95-106
ISSN
0376-7388 (ISSN-L)
DOI
10.1016/j.memsci.2003.09.019
OpenAlex
W1971249227
Cited by
1,007
References
2
FWCI
26.48
Type
journal article
Language
en
Open access
bronze
Licence
www.elsevier.com/tdm/userlicense/1.0/ (tdm)

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.