An easy method for processing and identification of natural and synthetic microfibers and microplastics in indoor and outdoor air
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Microplastics and microfibers can contaminate every matrix, including in the atmosphere, thus leading to incidental inhalation. However, concentrations of airborne synthetic particle in indoor and outdoor environments are not well understood due to the complexities of sampling, sample processing and identification. This work aims at producing a simple protocol to determine the concentrations of airborne microplastics and fibers. This is accomplished by removing organic matter using hydrogen peroxide (H 2 O 2 ), followed by removal of mineral matter by density separation with sodium iodide (NaI). Finally, identification of fibers into synthetic or natural under the stereomicroscope can be achieved following a diagram produced by systematically observing the most common textile fibers. This method produces a recovery rate of 94.4 % for spiked samples and has been proven suitable for environmental samples. •Fibers and microplastics in air are easier to identify after carbonaceous matter removal; •No loss of microfiber is expected from the solutions used; •Recovery rates of spiked samples is 94.4 %.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Abbasi, S., Keshavarzi, B., Moore, F., Turner, A., Kelly, F. J., Dominguez, A. O., & Jaafarzadeh, N. (2019) · Environmental Pollution · doi:10.1016/j.envpol.2018.10.039 · Cited by 770
Cited by
De Falco, F., Cocca, M., Avella, M., & Thompson, R. C. (2020) · Environmental Science & Technology · doi:10.1021/acs.est.9b06892 · Cited by 452
O'Brien, S., Rauert, C., Ribeiro, F., Okoffo, E. D., Burrows, S. D., O'Brien, J. W., Wang, X., Wright, S. L., & Thomas, K. V. (2023) · Science of The Total Environment · doi:10.1016/j.scitotenv.2023.162193 · Cited by 409
Prata, J. C., Reis, V., da Costa, J. P., Mouneyrac, C., Duarte, A. C., & Rocha-Santos, T. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.123660 · Cited by 338
Self-citationMicroplastics in the environment: Occurrence, perils, and eradication
Sharma, S., Basu, S., Shetti, N. P., Nadagouda, M. N., & Aminabhavi, T. M. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.127317 · Cited by 321
Athey, S. N., & Erdle, L. M. (2022) · Environmental Toxicology and Chemistry · doi:10.1002/etc.5173 · Cited by 289
Metadata
- Authors
- Prata, J. C., Castro, J. L., da Costa, J. P., Duarte, A. C., Cerqueira, M., & Rocha-Santos, T.
- Venue
- MethodsX
- Publisher
- Elsevier BV
- Published
- 2020
- Volume
- 7
- Pages
- 100762
- ISSN
- 2215-0161 (ISSN-L)
- OpenAlex
- W2994100063
- Cited by
- 113
- References
- 1
- FWCI
- 3.97
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.