CO2 capture using amine-functionalized bimetallic MIL-101 MOFs and their stability on exposure to humid air and acid gases
The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
A series of polyethyleneimine (PEI)-impregnated MIL-101(Cr, Mg) adsorbents with different PEI loadings was synthesized in the present work. Although the surface area and pore volume of MIL-101(Cr, Mg) decreased significantly as the PEI loading increased, all the resulting composites exhibited a dramatically enhanced CO2 adsorption capacity at low pressures. Up to 20 wt% PEI loading, the CO2 adsorption capacity reached a competitive value of about 3 mmol/g at 25 °C and 1 bar. The stability of these PEI-MIL-101(Cr, Mg) composites was analyzed by exposing them to humid air, SOx, and NOx for a period of six days. No noticeable changes could be discerned in the X-ray diffraction patterns of the exposed composites; however, the CO2 adsorption capacity reduced by 30%–35% due to the formation of nitrate and sulfate compounds on the surfaces of the materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Carbon capture and storage: how green can black be
Haszeldine, R. S. (2009) · Science · doi:10.1126/science.1172246 · Cited by 2,021
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
Gong, R., Ye, J., Dai, W., Yan, X., Hu, J., Hu, X., Li, S., & Huang, H. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie402138w · Cited by 323
Sorbents for CO2 capture from flue gas—aspects from materials and theoretical chemistry
Hedin, N., Chen, L., & Laaksonen, A. (2010) · Nanoscale · doi:10.1039/c0nr00042f · Cited by 243
Kinetic studies on carbon dioxide capture using lignocellulosic based activated carbon
Rashidi, N. A., Yusup, S., & Hameed, B. H. (2013) · Energy · doi:10.1016/j.energy.2013.08.050 · Cited by 122
Cited by
Carbon Capture From Flue Gas and the Atmosphere: A Perspective
Wang, X., & Song, C. (2020) · Frontiers in Energy Research · doi:10.3389/fenrg.2020.560849 · Cited by 428
“Only one article reported the amine efficiency over 0.5, which was attributed to the contribution of Frontiers in Energy Research | www.frontiersin.org December 2020 | Volume 8 | Article 56084911 CO2 physisorption on the porous support (Gaikwad et al., 2019).”
BackgroundInfluentialCO2 capture adsorbents functionalized by amine – bearing polymers: A review
Varghese, A. M., & Karanikolos, G. N. (2020) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2020.103005 · Cited by 363
Trends in Solid Adsorbent Materials Development for CO 2 Capture
Pardakhti, M., Jafari, T., Tobin, Z., Dutta, B., Moharreri, E., Shemshaki, N. S., Suib, S., & Srivastava, R. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b08487 · Cited by 357
Recent progress in metal-organic frameworks (MOFs) for CO2 capture at different pressures
Mahajan, S., & Lahtinen, M. (2022) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2022.108930 · Cited by 282
Carbon Capture Technologies: A Review on Technology Readiness Level
Hekmatmehr, H., Esmaeili, A., Pourmahdi, M., Atashrouz, S., Abedi, A., Ali Abuswer, M., Nedeljkovic, D., Latifi, M., Farag, S., & Mohaddespour, A. (2024) · Fuel · doi:10.1016/j.fuel.2024.130898 · Cited by 189
Metadata
- Authors
- Gaikwad, S., Kim, S.-J., & Han, S.
- Venue
- Microporous and Mesoporous Materials
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 277
- Pages
- 253-260
- ISSN
- 1387-1811 (ISSN-L)
- OpenAlex
- W2899968138
- Cited by
- 82
- References
- 5
- FWCI
- 4.48
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: CO2 capture using amine-functionalized bimetallic MIL-101 MOFs and their stability on exposure to humid air and acid gases. https://app.cochat.ai/papers/10.1016/j.micromeso.2018.11.001
- The paper
- Gaikwad, S., Kim, S.-J., & Han, S. (2019). CO2 capture using amine-functionalized bimetallic MIL-101 MOFs and their stability on exposure to humid air and acid gases. Microporous and Mesoporous Materials. https://doi.org/10.1016/j.micromeso.2018.11.001
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.