The DOI matches its Crossref record; 214 of the 214 references it cites were found in a registry or an index.
Role of oxygen, nitrogen and sulfur functionalities on the surface of nanoporous carbons in CO2 adsorption: A critical review
Abstract
In todays’ perspective, separation of CO2 from different gas streams is extremely important. Besides the key separation need of CO2 that lies with its isolation from N2 in flue gas, different other separation needs of CO2 includes natural gas separation, biogas upgrading, direct CO2 capture from air and purification other gas streams from the mixtures of CO2. The technical challenges of CO2 separation varies with the type of gas mixtures and CO2 concentration. Within different CO2 separation techniques, adsorptive separation of CO2 has gained attention owing to its low cost, regenerability and zero hazard. Among different types of adsorbents, nanoporous carbons are highly attractive because of their lowest cost, versatile synthesis protocol and efficient separation. In past several years, both computation and experimental results established that few selected heteroatoms, including oxygen, nitrogen and sulfur on the surface of porous carbon influences CO2 adsorption to a great extent compared to pristine carbons. This critical review summed up the synthesis procedure, characterization protocol and surface characteristics of oxygen, nitrogen and sulfur functionalized porous carbons, specific type of functionalities in each type of heteroatom that particularly influences CO2 adsorption and computational results as well as experimental findings that corroborated the positive role of heteroatoms in CO2 separation. At the end, few sets of critical comments and recommendations have been provided on the need of accurate analysis, exact interpretation of the role of heteroatoms in CO2 separation and future direction of research that might benefit the CO2 separation by heteroatom doped carbons in real-world.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–214 of 214
Synthesis of Nitrogen and Sulfur Codoped Nanoporous Carbons from Algae: Role in CO2 Separation
Saha, D., Thorpe, R., Bramer, S. E. V., Alexander, N., Hensley, D. K., Orkoulas, G., & Chen, J. (2018) · ACS Omega · doi:10.1021/acsomega.8b02892 · Cited by 34
Self-citationCho, S., Yu, H., Kim, K., Yi, K. B., & Lee, Y. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.09.047 · Cited by 33
Zhou, S., Xu, H., Yuan, Q., Shen, H., Zhu, X., Liu, Y., & Gan, W. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b10502 · Cited by 33
Adsorption Properties of N2, CH4, and CO2 on Sulfur-Doped Microporous Carbons
Su, W., Yao, L., Ran, M., Sun, Y. J., Liu, J., & Wang, X. (2018) · Journal of Chemical & Engineering Data · doi:10.1021/acs.jced.8b00227 · Cited by 32
Li, X., Xue, Q., He, D., Zhu, L., Du, Y., Xing, W., & Zhang, T. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b01612 · Cited by 31
Carbon Dioxide Emissions and Carbonation Sensors
Demirbaş, A. (2007) · Energy Sources Part A Recovery Utilization and Environmental Effects · doi:10.1080/00908310600628263 · Cited by 30
Activated polypyrrole-derived carbon spheres for superior CO2 uptake at ambient conditions
Dassanayake, A. C., & Jaroniec, M. (2018) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2018.04.002 · Cited by 29
Effect of Water on the CO2Adsorption Capacity of Amine-Functionalized Carbon Sorbents
Psarras, P. C., He, J., & Wilcox, J. L. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b05064 · Cited by 28
Bord, N., Cr�tier, G., Rocca, J. L., Bailly, C., & Souchez, J.-P. (2004) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-004-2754-3 · Cited by 24
Robust algorithms for the solution of the ideal adsorbed solution theory equations
Mangano, E., Friedrich, D., & Brandani, S. (2014) · AIChE Journal · doi:10.1002/aic.14684 · Cited by 24
Facile and fast polyaniline-directed synthesis of monolithic carbon cryogels from glucose
Liang, L., Zhou, M., Li, K., & Jiang, L. (2018) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2018.01.035 · Cited by 22
Controlled release of alendronate from nitrogen-doped mesoporous carbon
Saha, D., Spurri, A., Chen, J., & Hensley, D. K. (2016) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2016.04.014 · Cited by 19
Self-citationZhang, Y., Zhang, Y., Wang, L., Jiang, H. F., & Xiong, C. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b00331 · Cited by 16
Fluorine-rich carbon nanoscrolls for CO2/CO (C2H2) adsorptive separation
Li, X., Xue, Q., Chang, X., Zhu, L., & Zheng, H. (2017) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.07.022 · Cited by 15
Cited by
Adsorption of Carbon Dioxide for post-combustion capture: a review
Raganati, F., Miccio, F., & Ammendola, P. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c01618 · Cited by 661
Nitrogen containing functional groups of biochar: An overview
Leng, L., Xu, S., Liu, R., Yu, T., Zhuo, X., Leng, S., Xiong, Q., & Huang, H. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2019.122286 · Cited by 532
Osman, A. I., Fawzy, S., Farghali, M., El-Azazy, M., Elgarahy, A. M., Fahim, R. A., Maksoud, M. I. A. A., Ajlan, A. A., Yousry, M., Saleem, Y., et al. (2022) · Environmental Chemistry Letters · doi:10.1007/s10311-022-01424-x · Cited by 515
Zeolites as Selective Adsorbents for CO2 Separation
Boer, D. G., Langerak, J., & Pescarmona, P. P. (2023) · ACS Applied Energy Materials · doi:10.1021/acsaem.2c03605 · Cited by 481
Petrovic, B., Gorbounov, M., & Masoudi Soltani, S. (2021) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2020.110751 · Cited by 381
Metadata
- Authors
- Saha, D., & Kienbaum, M. J.
- Venue
- Microporous and Mesoporous Materials
- Publisher
- Elsevier BV
- Published
- 2019-10
- Volume
- 287
- Pages
- 29-55
- ISSN
- 1387-1811 (ISSN-L)
- OpenAlex
- W2945074710
- Cited by
- 275
- References
- 214
- FWCI
- 15.21
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.