The DOI matches its Crossref record; 214 of the 214 references it cites were found in a registry or an index.
Role of oxygen, nitrogen and sulfur functionalities on the surface of nanoporous carbons in CO2 adsorption: A critical review
Abstract
In todays’ perspective, separation of CO2 from different gas streams is extremely important. Besides the key separation need of CO2 that lies with its isolation from N2 in flue gas, different other separation needs of CO2 includes natural gas separation, biogas upgrading, direct CO2 capture from air and purification other gas streams from the mixtures of CO2. The technical challenges of CO2 separation varies with the type of gas mixtures and CO2 concentration. Within different CO2 separation techniques, adsorptive separation of CO2 has gained attention owing to its low cost, regenerability and zero hazard. Among different types of adsorbents, nanoporous carbons are highly attractive because of their lowest cost, versatile synthesis protocol and efficient separation. In past several years, both computation and experimental results established that few selected heteroatoms, including oxygen, nitrogen and sulfur on the surface of porous carbon influences CO2 adsorption to a great extent compared to pristine carbons. This critical review summed up the synthesis procedure, characterization protocol and surface characteristics of oxygen, nitrogen and sulfur functionalized porous carbons, specific type of functionalities in each type of heteroatom that particularly influences CO2 adsorption and computational results as well as experimental findings that corroborated the positive role of heteroatoms in CO2 separation. At the end, few sets of critical comments and recommendations have been provided on the need of accurate analysis, exact interpretation of the role of heteroatoms in CO2 separation and future direction of research that might benefit the CO2 separation by heteroatom doped carbons in real-world.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sing, K. S. W. (1985) · Pure and Applied Chemistry · doi:10.1351/pac198557040603 · Cited by 24,485
(2007) · London School of Economics and Political Science Research Online (London School of Economics and Political Science) · Cited by 9,690
Ong, W.-J., Tan, L.-L., Ng, Y. H., Yong, S.-T., & Chai, S.-P. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00075 · Cited by 7,147
Carbon Dioxide Capture in Metal–Organic Frameworks
Sumida, K., Rogow, D. L., Mason, J. A., McDonald, T. M., Bloch, E. D., Herm, Z. R., Bae, T.-H., & Long, J. R. (2012) · Chemical Reviews · doi:10.1021/cr2003272 · Cited by 6,408
Kyoto Protocol to the United Nations Framework Convention on Climate Change
(2018) · International Law Documents · doi:10.1017/9781316577226.067 · Cited by 4,351
Carbon Dioxide Capture: Prospects for New Materials
D'Alessandro, D. M., Smit, B., & Long, J. R. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201000431 · Cited by 4,046
Thermodynamics of mixed‐gas adsorption
Myers, A. L., & Prausnitz, J. M. (1965) · AIChE Journal · doi:10.1002/aic.690110125 · Cited by 3,775
Wang, H., Maiyalagan, T., & Wang, X. (2012) · ACS Catalysis · doi:10.1021/cs200652y · Cited by 3,618
Global surface temperature change
Hansen, J., Ruedy, R., Sato, M., & Lo, K. (2010) · Reviews of Geophysics · doi:10.1029/2010rg000345 · Cited by 3,081
Modification of the surface chemistry of activated carbons
Figueiredo, J. L., Pereira, M. F. R., Freitas, M. M. A., & Órfão, J. J. M. (1999) · Carbon · doi:10.1016/s0008-6223(98)00333-9 · Cited by 2,935
Water Stability and Adsorption in Metal–Organic Frameworks
Burtch, N. C., Jasuja, H., & Walton, K. S. (2014) · Chemical Reviews · doi:10.1021/cr5002589 · Cited by 2,730
Direct Capture of CO2 from Ambient Air
Sanz-Pérez, E. S., Murdock, C. R., Didas, S. A., & Jones, C. W. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00173 · Cited by 2,406
Evolution of nitrogen functionalities in carbonaceous materials during pyrolysis
Pels, J. R., Kapteijn, F., Moulijn, J. A., Zhu, Q., & Thomas, K. M. (1995) · Carbon · doi:10.1016/0008-6223(95)00154-6 · Cited by 2,041
Paraknowitsch, J. P., & Thomas, A. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41444b · Cited by 1,848
Graphitic carbon nitride based nanocomposites: a review
Zhao, Z., Sun, Y., & Dong, F. (2015) · Nanoscale · doi:10.1039/c4nr03008g · Cited by 1,661
Why Is CO2 So Soluble in Imidazolium-Based Ionic Liquids?
Cadena, C., Anthony, J. L., Shah, J. K., Morrow, T. I., Brennecke, J. F., & Maginn, E. J. (2004) · Journal of the American Chemical Society · doi:10.1021/ja039615x · Cited by 1,518
Chemical Identification of Surface Groups
Boehm, H. P. (1966) · Advances in Catalysis · doi:10.1016/s0360-0564(08)60354-5 · Cited by 1,307
Yang, S., Zhi, L., Tang, K., Feng, X., Maier, J., & Müllen, K. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200186 · Cited by 1,277
A review on surface modification of activated carbon for carbon dioxide adsorption
Shafeeyan, M. S., Daud, W. M. A. W., Houshmand, A., & Shamiri, A. (2010) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2010.07.006 · Cited by 1,128
Deng, Y., Xie, Y., Zou, K., & Ji, X. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta08620e · Cited by 997
N‐Doped Polypyrrole‐Based Porous Carbons for CO2 Capture
Sevilla, M., Valle‐Vigón, P., & Fuertes, A. B. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100291 · Cited by 936
Wei, J., Zhou, D., Sun, Z., Deng, Y., Xia, Y., & Zhao, D. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201202764 · Cited by 931
XPS of nitrogen-containing functional groups on activated carbon
Jansen, R. J. J., & van Bekkum, H. (1995) · Carbon · doi:10.1016/0008-6223(95)00030-h · Cited by 867
Rapid Synthesis of Nitrogen‐Doped Porous Carbon Monolith for CO2 Capture
Hao, G., Li, W., Qian, D., & Lu, A. (2010) · Advanced Materials · doi:10.1002/adma.200903765 · Cited by 818
Expert credibility in climate change
Anderegg, W. R. L., Prall, J. W., Harold, J., & Schneider, S. H. (2010) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1003187107 · Cited by 813
Surface-oxidized carbon fibers: I. Surface structure and chemistry
Zielke, U., Hüttinger, K. J., & Hoffman, W. P. (1996) · Carbon · doi:10.1016/0008-6223(96)00032-2 · Cited by 788
Hydrophilic Hierarchical Nitrogen‐Doped Carbon Nanocages for Ultrahigh Supercapacitive Performance
Zhao, J., Lai, H., Lyu, Z., Jiang, Y., Xie, K., Wang, X., Wu, Q., Yang, L., Jin, Z., Ma, Y., et al. (2015) · Advanced Materials · doi:10.1002/adma.201500945 · Cited by 788
Huang, N., Chen, X., Krishna, R., & Jiang, D. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201411262 · Cited by 762
Yang, J., Zhou, X., Wu, D., Zhao, X., & Zhou, Z. (2017) · Advanced Materials · doi:10.1002/adma.201604108 · Cited by 755
CO2‐Alkanolamine Reaction Kinetics: A Review of Recent Studies
Vaidya, P. D., & Kenig, E. Y. (2007) · Chemical Engineering & Technology · doi:10.1002/ceat.200700268 · Cited by 720
Effect of pore size on carbon dioxide sorption by carbide derived carbon
Presser, V., McDonough, J., Yeon, S.-H., & Gogotsi, Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01176f · Cited by 668
The energy–climate challenge: Recent trends in CO2 emissions from fuel combustion
Quadrelli, R., & Peterson, S. (2007) · Energy Policy · doi:10.1016/j.enpol.2007.07.001 · Cited by 627
Jeon, I., Zhang, S., Zhang, L., Choi, H., Seo, J., Xia, Z., Dai, L., & Baek, J. (2013) · Advanced Materials · doi:10.1002/adma.201302753 · Cited by 626
The role of defects and doping in 2D graphene sheets and 1D nanoribbons
Terrones, H., Lv, R., Terrones, M., & Dresselhaus, M. S. (2012) · Reports on Progress in Physics · doi:10.1088/0034-4885/75/6/062501 · Cited by 626
Qu, K., Zheng, Y., Dai, S., & Qiao, S. Z. (2016) · Nano Energy · doi:10.1016/j.nanoen.2015.11.027 · Cited by 623
Wohlgemuth, S.-A., White, R. J., Willinger, M.-G., Titirici, M.-M., & Antonietti, M. (2012) · Green Chemistry · doi:10.1039/c2gc35309a · Cited by 581
Hao, G.-P., Li, W.-C., Qian, D., Wang, G.-H., Zhang, W.-P., Zhang, T., Wang, A.-Q., Schüth, F., Bongard, H.-J., & Lu, A.-H. (2011) · Journal of the American Chemical Society · doi:10.1021/ja203857g · Cited by 569
Aijaz, A., Fujiwara, N., & Xu, Q. (2014) · Journal of the American Chemical Society · doi:10.1021/ja5003907 · Cited by 569
On the nature of basic sites on carbon surfaces: an overview
Montes-Morán, M. A., Suárez, D., Menéndez, J. A., & Fuente, E. (2004) · Carbon · doi:10.1016/j.carbon.2004.01.023 · Cited by 566
Nitrogen doping effects on the structure of graphene
Geng, D., Yang, S., Zhang, Y., Yang, J., Liu, J., Li, R., Sham, T.-K., Sun, X., Ye, S., & Knights, S. (2011) · Applied Surface Science · doi:10.1016/j.apsusc.2011.05.131 · Cited by 557
Maiti, U. N., Lee, W. J., Lee, J. M., Oh, Y., Kim, J. Y., Kim, J. E., Shim, J., Han, T. H., & Kim, S. O. (2014) · Advanced Materials · doi:10.1002/adma.201303265 · Cited by 544
Activated Carbon Surfaces in Environmental Remediation
(2006) · Interface Science and Technology · doi:10.1016/s1573-4285(06)x8008-0 · Cited by 524
Superior CO2 uptake of N-doped activated carbon through hydrogen-bonding interaction
Xing, W., Liu, C., Zhou, Z., Zhang, L., Zhou, J., Zhuo, S., Yan, Z., Gao, H., Wang, G., & Qiao, S. Z. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21653a · Cited by 500
To, J. W. F., He, J., Mei, J., Haghpanah, R., Chen, Z., Kurosawa, T., Chen, S., Bae, W.-G., Pan, L., Tok, J. B.-H., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b11955 · Cited by 475
Su, Y., Zhang, Y., Zhuang, X., Li, S., Wu, D., Zhang, F., & Feng, X. (2013) · Carbon · doi:10.1016/j.carbon.2013.05.067 · Cited by 449
Otake, Y., & Jenkins, R. G. (1993) · Carbon · doi:10.1016/0008-6223(93)90163-5 · Cited by 446
Predicting multicomponent adsorption: 50 years of the ideal adsorbed solution theory
Walton, K. S., & Sholl, D. S. (2015) · AIChE Journal · doi:10.1002/aic.14878 · Cited by 444
Infrared Spectroscopy of Carbon Materials: A Quantum Chemical Study of Model Compounds
Fuente, E., Menéndez, J. A., Díez, M. A., Suárez, D., & Montes-Morán, M. A. (2003) · The Journal of Physical Chemistry B · doi:10.1021/jp027482g · Cited by 434
Foo, M. L., Matsuda, R., Hijikata, Y., Krishna, R., Sato, H., Horike, S., Hori, A., Duan, J., Sato, Y., Kubota, Y., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b10491 · Cited by 431
Artyushkova, K., Kiefer, B., Halevi, B., Knop-Gericke, A., Schlogl, R., & Atanassov, P. (2013) · Chemical Communications · doi:10.1039/c3cc40324f · Cited by 430
Optimized Acetylene/Carbon Dioxide Sorption in a Dynamic Porous Crystal
Zhang, J.-P., & Chen, X.-M. (2009) · Journal of the American Chemical Society · doi:10.1021/ja8089872 · Cited by 420
Enhanced CO2 Capture Capacity of Nitrogen-Doped Biomass-Derived Porous Carbons
Chen, J., Yang, J., Hu, G., Hu, X., Li, Z., Shen, S., Radosz, M., & Fan, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01425 · Cited by 419
Xu, X., Song, C., Miller, B. G., & Scaroni, A. W. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie050382n · Cited by 379
Sulfur-Doped Graphene via Thermal Exfoliation of Graphite Oxide in H2S, SO2, or CS2 Gas
Poh, H. L., Šimek, P., Sofer, Z., & Pumera, M. (2013) · ACS Nano · doi:10.1021/nn401296b · Cited by 372
Si, W., Zhou, J., Zhang, S., Li, S., Xing, W., & Zhuo, S. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.06.065 · Cited by 367
CO2 adsorption at nitrogen-doped carbons prepared by K2CO3 activation of urea-modified coconut shell
Yue, L., Xia, Q., Wang, L., Wang, L., DaCosta, H., Yang, J., & Hu, X. (2018) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.09.040 · Cited by 364
Xia, Y., Mokaya, R., Walker, G. S., & Zhu, Y. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201100061 · Cited by 362
Reversible adsorption of carbon dioxide on amine surface-bonded silica gel
Leal, O., Bolívar, C., Ovalles, C., García, J. J., & Espidel, Y. (1995) · Inorganica Chimica Acta · doi:10.1016/0020-1693(95)04534-1 · Cited by 361
Chandra, V., Yu, S. U., Kim, S. H., Yoon, Y. S., Kim, D. Y., Kwon, A. H., Meyyappan, M., & Kim, K. S. (2012) · Chem. Commun. · doi:10.1039/c1cc15599g · Cited by 340
Zhao, X., Zhang, Q., Chen, C.-M., Zhang, B., Reiche, S., Wang, A., Zhang, T., Schlögl, R., & Sheng Su, D. (2012) · Nano Energy · doi:10.1016/j.nanoen.2012.04.003 · Cited by 338
Xiao, K., Ding, L., Liu, G., Chen, H., Wang, S., & Wang, H. (2016) · Advanced Materials · doi:10.1002/adma.201601125 · Cited by 324
Comprehensive study of ultra-microporous nitrogen-doped activated carbon for CO2 capture
Sethia, G., & Sayari, A. (2015) · Carbon · doi:10.1016/j.carbon.2015.05.017 · Cited by 319
Lanthanum-catalysed synthesis of microporous 3D graphene-like carbons in a zeolite template
Kim, K., Lee, T., Kwon, Y., Seo, Y., Song, J., Park, J. K., Lee, H., Park, J. Y., Ihee, H., Cho, S. J., et al. (2016) · Nature · doi:10.1038/nature18284 · Cited by 317
Saha, D., Grappe, H. A., Chakraborty, A., & Orkoulas, G. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00745 · Cited by 316
Self-citationEl‐Sawy, A. M., Mosa, I. M., Su, D., Guild, C. J., Khalid, S., Joesten, R., Rusling, J. F., & Suib, S. L. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501966 · Cited by 310
Yan, Y., Yin, Y.-X., Xin, S., Guo, Y.-G., & Wan, L.-J. (2012) · Chemical Communications · doi:10.1039/c2cc36234a · Cited by 304
Describing the Diffusion of Guest Molecules Inside Porous Structures
Krishna, R. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp906879d · Cited by 303
Quantification of Nitrogen Forms in Argonne Premium Coals
Kelemen, S. R., Gorbaty, M. L., & Kwiatek, P. J. (1994) · Energy & Fuels · doi:10.1021/ef00046a013 · Cited by 299
TPD and XPS studies of O2, CO2, and H2O adsorption on clean polycrystalline graphite
Marchon, B., Carrazza, J., Heinemann, H., & Somorjai, G. A. (1988) · Carbon · doi:10.1016/0008-6223(88)90149-2 · Cited by 291
X-ray absorption spectroscopy of graphite oxide
Jeong, H.-K., Noh, H.-J., Kim, J.-Y., Jin, M. H., Park, C. Y., & Lee, Y. H. (2008) · EPL (Europhysics Letters) · doi:10.1209/0295-5075/82/67004 · Cited by 286
Highly selective CO2 capture by S-doped microporous carbon materials
Seema, H., Kemp, K. C., Le, N. H., Park, S.-W., Chandra, V., Lee, J. W., & Kim, K. S. (2014) · Carbon · doi:10.1016/j.carbon.2013.09.006 · Cited by 277
Sulfur‐Functionalized Mesoporous Carbon
Shin, Y., Fryxell, G. E., Um, W., Parker, K., Mattigod, S. V., & Skaggs, R. (2007) · Advanced Functional Materials · doi:10.1002/adfm.200601230 · Cited by 276
Ice Core Records of Atmospheric CO 2 Around the Last Three Glacial Terminations
Fischer, H., Wahlen, M., Smith, J., Mastroianni, D., & Deck, B. (1999) · Science · doi:10.1126/science.283.5408.1712 · Cited by 271
High-performance CO2 sorbents from algae
Sevilla, M., Falco, C., Titirici, M.-M., & Fuertes, A. B. (2012) · RSC Advances · doi:10.1039/c2ra22552b · Cited by 269
Liu, X., & Antonietti, M. (2013) · Advanced Materials · doi:10.1002/adma.201302034 · Cited by 269
Gas Adsorption Properties of the Chromium-Based Metal Organic Framework MIL-101
Chowdhury, P., Bikkina, C., & Gumma, S. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp811418r · Cited by 269
Xu, J., Dong, G., Jin, C., Huang, M., & Guan, L. (2013) · ChemSusChem · doi:10.1002/cssc.201200564 · Cited by 262
Drage, T. C., Arenillas, A., Smith, K. M., Pevida, C., Piippo, S., & Snape, C. E. (2007) · Fuel · doi:10.1016/j.fuel.2006.07.003 · Cited by 259
Horikawa, T., Sakao, N., Sekida, T., Hayashi, J., Do, D. D., & Katoh, M. (2012) · Carbon · doi:10.1016/j.carbon.2011.12.033 · Cited by 255
Preparation of sulfur-doped microporous carbons for the storage of hydrogen and carbon dioxide
Xia, Y., Zhu, Y., & Tang, Y. (2012) · Carbon · doi:10.1016/j.carbon.2012.07.044 · Cited by 247
Wang, C., Luo, H., Li, H., Zhu, X., Yu, B., & Dai, S. (2012) · Chemistry – A European Journal · doi:10.1002/chem.201103092 · Cited by 242
Liu, Y., & Wilcox, J. (2013) · Environmental Science & Technology · doi:10.1021/es3012029 · Cited by 239
Tian, W., Zhang, H., Sun, H., Suvorova, A., Saunders, M., Tade, M., & Wang, S. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201603937 · Cited by 234
Is It Possible to Dope Single‐Walled Carbon Nanotubes and Graphene with Sulfur?
Denis, P. A., Faccio, R., & Mombru, A. W. (2009) · ChemPhysChem · doi:10.1002/cphc.200800592 · Cited by 233
Sulfonated polybenzimidazole membranes — preparation and physico-chemical characterization
Staiti, P., Lufrano, F., Aricò, A. S., Passalacqua, E., & Antonucci, V. (2001) · Journal of Membrane Science · doi:10.1016/s0376-7388(01)00359-3 · Cited by 229
Wang, L., & Yang, R. T. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp2100446 · Cited by 221
Zhao, Y., Liu, X., Yao, K. X., Zhao, L., & Han, Y. (2012) · Chemistry of Materials · doi:10.1021/cm303072n · Cited by 221
Boyjoo, Y., Cheng, Y., Zhong, H., Tian, H., Pan, J., Pareek, V. K., Jiang, S. P., Lamonier, J.-F., Jaroniec, M., & Liu, J. (2017) · Carbon · doi:10.1016/j.carbon.2017.02.030 · Cited by 216
Yu, J., Guo, M., Muhammad, F., Wang, A., Zhang, F., Li, Q., & Zhu, G. (2014) · Carbon · doi:10.1016/j.carbon.2013.12.058 · Cited by 210
Study of CO2 Absorption and Desorption in a Packed Column
Yeh, J. T., Pennline, H. W., & Resnik, K. P. (2001) · Energy & Fuels · doi:10.1021/ef0002389 · Cited by 206
Zhang, D., Yuan, H., Zheng, L., Ma, Y., Feng, H., & Luo, H. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta11208j · Cited by 204
Kabir, S., Artyushkova, K., Serov, A., Kiefer, B., & Atanassov, P. (2016) · Surface and Interface Analysis · doi:10.1002/sia.5935 · Cited by 204
Highly porous nitrogen-doped polyimine-based carbons with adjustable microstructures for CO2 capture
Wang, J., Senkovska, I., Oschatz, M., Lohe, M. R., Borchardt, L., Heerwig, A., Liu, Q., & Kaskel, S. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta11995e · Cited by 201
Heuchel, M., Davies, G. M., Buss, E., & Seaton, N. A. (1999) · Langmuir · doi:10.1021/la9904298 · Cited by 200
Choi, C. H., Park, S. H., & Woo, S. I. (2011) · Green Chem. · doi:10.1039/c0gc00384k · Cited by 199
Lim, G., Lee, K. B., & Ham, H. C. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b12090 · Cited by 197
Electronic and optical properties of nitrogen-doped multiwalled carbon nanotubes
Lim, S. H., Elim, H. I., Gao, X. Y., Wee, A. T. S., Ji, W., Lee, J. Y., & Lin, J. (2006) · Physical Review B · doi:10.1103/physrevb.73.045402 · Cited by 189
Rajagopalan, A. K., Avila, A. M., & Rajendran, A. (2016) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2015.12.033 · Cited by 189
A one-pot hydrothermal synthesis of tunable dual heteroatom-doped carbon microspheres
Wohlgemuth, S.-A., Vilela, F., Titirici, M.-M., & Antonietti, M. (2012) · Green Chemistry · doi:10.1039/c2gc16415a · Cited by 188
Choi, C. H., Chung, M. W., Park, S. H., & Woo, S. I. (2013) · Phys. Chem. Chem. Phys. · doi:10.1039/c2cp44147k · Cited by 180
Bai, R., Yang, M., Hu, G., Xu, L., Hu, X., Li, Z., Wang, S., Dai, W., & Fan, M. (2015) · Carbon · doi:10.1016/j.carbon.2014.09.079 · Cited by 177
Topological Defects: Origin of Nanopores and Enhanced Adsorption Performance in Nanoporous Carbon
Guo, J., Morris, J. R., Ihm, Y., Contescu, C. I., Gallego, N. C., Duscher, G. J., Pennycook, S. J., & Chisholm, M. F. (2012) · Small · doi:10.1002/smll.201200894 · Cited by 174
Rana, M., Subramani, K., Sathish, M., & Gautam, U. K. (2017) · Carbon · doi:10.1016/j.carbon.2016.12.059 · Cited by 170
CO2 capture in lignin-derived and nitrogen-doped hierarchical porous carbons
Saha, D., Van Bramer, S. E., Orkoulas, G., Ho, H.-C., Chen, J., & Henley, D. K. (2017) · Carbon · doi:10.1016/j.carbon.2017.05.088 · Cited by 168
Self-citationDRIFT and TK/TPD Analyses of Surface Oxygen Complexes Formed during Carbon Gasification
Zhuang, Q.-L., Kyotani, T., & Tomita, A. (1994) · Energy & Fuels · doi:10.1021/ef00045a028 · Cited by 166
Synthesis in pilot plant scale and physical properties of sulfonated polystyrene
Martins, C. R., Ruggeri, G., & Paoli, M. D. (2003) · Journal of the Brazilian Chemical Society · doi:10.1590/s0103-50532003000500015 · Cited by 163
Heteroatom-doped nanoporous carbon derived from MOF-5 for CO2 capture
Ma, X., Li, L., Chen, R., Wang, C., Li, H., & Wang, S. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2017.11.069 · Cited by 163
Renewable Nitrogen‐Doped Hydrothermal Carbons Derived from Microalgae
Falco, C., Sevilla, M., White, R. J., Rothe, R., & Titirici, M. (2012) · ChemSusChem · doi:10.1002/cssc.201200022 · Cited by 160
Structural Stability of Metal Organic Framework MOF-177
Saha, D., & Deng, S. (2009) · The Journal of Physical Chemistry Letters · doi:10.1021/jz900028u · Cited by 153
Self-citationSynthesis and characterization of nitrogen-doped carbon xerogels
Gorgulho, H. F., Gonçalves, F., Pereira, M. F. R., & Figueiredo, J. L. (2009) · Carbon · doi:10.1016/j.carbon.2009.03.050 · Cited by 151
Microporous amine-functionalized aromatic polymers and their carbonized products for CO2 adsorption
Puthiaraj, P., Lee, Y., & Ahn, W. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.03.001 · Cited by 149
Wang, J., Zhang, P., Liu, L., Zhang, Y., Yang, J., Zeng, Z., & Deng, S. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.04.188 · Cited by 149
Chen, D., Fu, Y., Yu, W., Yu, G., & Pan, C. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.10.133 · Cited by 147
Nitrogen-doped carbon materials produced from hydrothermally treated tannin
Braghiroli, F. L., Fierro, V., Izquierdo, M. T., Parmentier, J., Pizzi, A., & Celzard, A. (2012) · Carbon · doi:10.1016/j.carbon.2012.07.027 · Cited by 143
Adeniran, B., & Mokaya, R. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b05020 · Cited by 142
Seredych, M., Jagiełło, J., & Bandosz, T. J. (2014) · Carbon · doi:10.1016/j.carbon.2014.03.024 · Cited by 142
Metal-Organic-Framework-Mediated Nitrogen-Doped Carbon for CO 2 Electrochemical Reduction
Wang, R., Sun, X., Ould‐Chikh, S., Osadchii, D., Bai, F., Kapteijn, F., & Gascón, J. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b02226 · Cited by 142
Indication of Superconductivity at 35 K in Graphite-Sulfur Composites
da Silva, R. R., Torres, J. H. S., & Kopelevich, Y. (2001) · Physical Review Letters · doi:10.1103/physrevlett.87.147001 · Cited by 141
Unusual Ultra‐Hydrophilic, Porous Carbon Cuboids for Atmospheric‐Water Capture
Hao, G., Mondin, G., Zheng, Z., Biemelt, T., Klosz, S., Schubel, R., Eychmüller, A., & Kaskel, S. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201409439 · Cited by 139
Wei, H., Chen, J., Fu, N., Chen, H., Lin, H., & Han, S. (2018) · Electrochimica Acta · doi:10.1016/j.electacta.2017.12.192 · Cited by 139
CO2 capture using N-containing nanoporous activated carbon obtained from argan fruit shells
Boujibar, O., Souikny, A., Ghamouss, F., Achak, O., Dahbi, M., & Chafik, T. (2018) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2018.03.005 · Cited by 137
Wei, H., Chen, H., Fu, N., Chen, J., Lan, G., Qian, W., Liu, Y., Lin, H., & Han, S. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.01.194 · Cited by 135
Yang, W., Davies, A. J., Lin, X., Suyetin, M. V., Matsuda, R., Blake, A. J., Wilson, C., Lewis, W., Parker, J. E., Tang, C. C., et al. (2012) · Chemical Science · doi:10.1039/c2sc20443f · Cited by 134
Wang, L., Yang, Z., Nie, H., Gu, C., Hua, W., Xu, X., Chen, X., Chen, Y. I., & Huang, S. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta07027b · Cited by 133
Sulfur-doped ordered mesoporous carbon with high electrocatalytic activity for oxygen reduction
Wang, H., Bo, X., Zhang, Y., & Guo, L. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.06.133 · Cited by 130
Effect of Surface Chemistry on Sorption of Water and Methanol on Activated Carbons
Bandosz, T. J., Jagiełło, J., Schwarz, J. A., & Krzyżanowski, A. (1996) · Langmuir · doi:10.1021/la960340r · Cited by 127
Chapter 1 Types of carbon adsorbents and their production
Menéndez, J. Á., & Martı́n-Gullón, I. (2006) · Interface science and technology · doi:10.1016/s1573-4285(06)80010-4 · Cited by 123
Atmospheric pCO2 since 60 Ma from records of seawater pH, calcium, and primary carbonate mineralogy
Demicco, R. V., Lowenstein, T., & Hardie, L. (2003) · Geology · doi:10.1130/g19727.1 · Cited by 123
Feasibility of using ionic liquids for carbon dioxide capture
Anthony, J. L., Aki, S. N. V. K., Maginn, E. J., & Brennecke, J. F. (2004) · International Journal of Environmental Technology and Management · doi:10.1504/ijetm.2004.004624 · Cited by 122
Triazine-based hyper-cross-linked polymers derived porous carbons for CO2 capture
Shao, L., Wang, S., Liu, M., Huang, J., & Liu, Y. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.01.145 · Cited by 121
Inamdar, S. N., Choi, H.-S., Wang, P., Song, M. Y., & Yu, J. (2013) · Electrochemistry Communications · doi:10.1016/j.elecom.2013.01.023 · Cited by 119
XRD evaluation of KOH activation process and influence of coal rank
Yoshizawa, N., Maruyama, K., Yamada, Y., et al. (2002) · Fuel · doi:10.1016/s0016-2361(02)00101-1 · Cited by 118
Comparison of methods to assess surface acidic groups on activated carbons
Bandosz, T. J., Jagiełło, J., & Schwarz, J. A. (1992) · Analytical Chemistry · doi:10.1021/ac00032a012 · Cited by 116
Does Water Condense in Carbon Pores?
Liu, J.-C., & Monson, P. A. (2005) · Langmuir · doi:10.1021/la0508902 · Cited by 115
Sun, Y., Zhao, J., Wang, J., Tang, N., Zhao, R., Zhang, D., Guan, T., & Li, K. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b02195 · Cited by 115
Guo, L., Yang, J., Hu, G., Hu, X. D., Wang, L., Dong, Y., DaCosta, H. F. M., & Fan, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00327 · Cited by 114
Hierarchically Structured Porous Nitrogen-Doped Carbon for Highly Selective CO2 Capture
Li, D., Chen, Y., Zheng, M. J., Zhao, H., Zhao, Y., & Sun, Z. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01230 · Cited by 112
Bénard, P., & Chahine, R. (1997) · Langmuir · doi:10.1021/la960843x · Cited by 111
Saha, D., Desipio, M. M., Hoinkis, T. J., Smeltz, E. J., Thorpe, R., Hensley, D. K., Fischer-Drowos, S. G., & Chen, J. (2018) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2018.07.030 · Cited by 111
Self-citationActivated Carbon Fiber and Textiles
(2016) · Elsevier eBooks · doi:10.1016/c2014-0-03521-6 · Cited by 110
Acid buffering capacity of basic carbons revealed by their continuous pK distribution
Conţescu, A., Vass, M., Contescu, C. I., Putyera, K., & Schwarz, J. A. (1998) · Carbon · doi:10.1016/s0008-6223(97)00168-1 · Cited by 109
Tiwari, D., Bhunia, H., & Bajpai, P. K. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2017.12.203 · Cited by 107
Liu, R., Ji, W.-J., He, T., Zhang, Z., Zhang, J., & Dang, F. (2014) · Carbon · doi:10.1016/j.carbon.2014.04.052 · Cited by 106
Shao, L., Liu, M., Huang, J., & Liu, Y. (2017) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.11.043 · Cited by 106
Gadipelli, S., Patel, H. A., & Guo, Z. (2015) · Advanced Materials · doi:10.1002/adma.201502047 · Cited by 103
Melamine-formaldehyde derived porous carbons for adsorption of CO 2 capture
Tiwari, D., Goel, C., Bhunia, H., & Bajpai, P. K. (2017) · Journal of Environmental Management · doi:10.1016/j.jenvman.2017.04.013 · Cited by 98
Comparative studies of CO2 and CH4 sorption on activated carbon in presence of water
Wang, Y., Zhou, Y., Liu, C., & Zhou, L. (2008) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2008.02.014 · Cited by 96
Evidence for CO2 reactive adsorption on nanoporous S- and N-doped carbon at ambient conditions
Bandosz, T. J., Seredych, M., Rodríguez-Castellón, E., Cheng, Y. Q., Daemen, L. L., & Ramirez-Cuesta, A. J. (2015) · Carbon · doi:10.1016/j.carbon.2015.10.007 · Cited by 95
Babu, D. J., Brüns, M., Schneider, R., Gerthsen, D., & Schneider, J. J. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b11686 · Cited by 95
Fechler, N., Fellinger, T., & Antonietti, M. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta13435k · Cited by 94
The change of TPD pattern of O2-gasified carbon upon air exposure
Zhuang, Q.-L., Kyotani, T., & Tomita, A. (1994) · Carbon · doi:10.1016/0008-6223(94)90177-5 · Cited by 93
Sevilla, M., & Fuertes, A. B. (2012) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2012.02.029 · Cited by 93
Mimura, T., SUDA, T., Iwaki, I., Honda, A., & Kumazawa, H. (1998) · Chemical Engineering Communications · doi:10.1080/00986449808912745 · Cited by 92
Dibenedetto, A., Aresta, M., Fragale, C., & Narracci, M. (2002) · Green Chemistry · doi:10.1039/b205319p · Cited by 86
Yuan, B., Wang, J., Chen, Y., Wu, X., Luo, H., & Deng, S. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta08436a · Cited by 83
Nitrogen and sulfur Co-doped microporous activated carbon macro-spheres for CO2 capture
Sun, Y., Li, K., Zhao, J., Wang, J., Tang, N., Zhang, D., Guan, T., & Jin, Z.-E. (2018) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2018.04.101 · Cited by 83
Intrinsically Sulfur‐ and Nitrogen‐Co‐doped Carbons from Thiazolium Salts
Paraknowitsch, J. P., Wienert, B., Zhang, Y., & Thomas, A. (2012) · Chemistry - A European Journal · doi:10.1002/chem.201202445 · Cited by 81
Highly selective CO2 capture by nitrogen enriched porous carbons
Cong, H., Zhang, M., Chen, Y., Chen, K., Hao, Y., Zhao, Y., & Feng, L. (2015) · Carbon · doi:10.1016/j.carbon.2015.04.052 · Cited by 79
Heteroatom substituted and decorated graphene: preparation and applications
Chen, N., Huang, X., & Qu, L. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c5cp04391c · Cited by 77
Adsorption properties of activated carbon fibers
Saha, D., & Grappe, H. A. (2016) · Elsevier eBooks · doi:10.1016/b978-0-08-100660-3.00005-5 · Cited by 74
Self-citationPatino, J. M. R., Gutiérrez, M. C., Carriazo, D., Ania, C. O., Fierro, J. L. G., Ferrer, M. L., & del Monte, F. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta00562g · Cited by 71
Xuefeng, B., Wei, Y., Wang, M., Xu, S. Z., Long, D., Wang, J., Qiao, W., & Ling, L. (2016) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2016.10.076 · Cited by 71
Micro/Mesoporous Activated Carbons Derived from Polyaniline: Promising Candidates for CO2 Adsorption
Silvestre‐Albero, A., Silvestre‐Albero, J., Escandell, M. M., & Rodríguez-Reinoso, F. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie5013129 · Cited by 70
Kwiatkowski, M., Policicchio, A., Seredych, M., & Bandosz, T. J. (2015) · Carbon · doi:10.1016/j.carbon.2015.11.019 · Cited by 68
Sulfur‐Doped Carbon Aerogel as a Metal‐Free Oxygen Reduction Catalyst
Seredych, M., László, K., & Bandosz, T. J. (2015) · ChemCatChem · doi:10.1002/cctc.201500192 · Cited by 66
Tsubota, T., Takenaka, K., Murakami, N., & Ohno, T. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.07.025 · Cited by 66
Saha, D., Orkoulas, G., Chen, J., & Hensley, D. K. (2016) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2016.12.015 · Cited by 66
Self-citationHsiao, H., Huang, C.-M., Hsu, M.-Y., & Chen, H. (2011) · Separation and Purification Technology · doi:10.1016/j.seppur.2011.08.006 · Cited by 65
Effects of Sulfur Doping and Humidity on CO2 Capture by Graphite Split Pore: A Theoretical Study
Li, X., Xue, Q., Chang, X., Zhu, L., Ling, C., & Zheng, H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b14281 · Cited by 65
Nitrogen-Doped Carbons: Remarkably Stable Materials for CO2 Capture
Sethia, G., & Sayari, A. (2014) · Energy & Fuels · doi:10.1021/ef500283e · Cited by 64
CO2 sorption in activated carbon in the presence of water
Sun, Y. J., Wang, Y., Zhang, Y., Zhou, Y., & Zhou, L. (2007) · Chemical Physics Letters · doi:10.1016/j.cplett.2007.02.008 · Cited by 63
Shen, Y., & Bai, J. (2010) · Chemical Communications · doi:10.1039/b913820j · Cited by 62
Kim, H. S., Kang, M. S., & Yoo, W. C. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b10552 · Cited by 61
S-doped carbon aerogels/GO composites as oxygen reduction catalysts
Seredych, M., László, K., Rodrı́guez-Castellón, E., & Bandosz, T. J. (2016) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2016.01.005 · Cited by 61
Lahaye, J., Nansé, G., Fioux, P., Bagreev, A., Broshnik, A. P., & STRELKO, V. V. (1999) · Applied Surface Science · doi:10.1016/s0169-4332(99)00108-7 · Cited by 59
Ultra-microporous N-doped carbon from polycondensed framework precursor for CO2 adsorption
Tian, Z., Huang, J., Zhang, X., Shao, G., He, Q., Cao, S., & Yuan, S. (2017) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.08.012 · Cited by 59
Global, Regional, and National Fossil-Fuel CO2 Emissions (1751 - 2011) (V. 2015)
Boden, T. A., Andres, R. J., & Marland, G. H. (2015) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · doi:10.3334/cdiac/00001_v2015 · Cited by 59
Nitrogen-Containing Functional Groups-Facilitated Acetone Adsorption by ZIF-8-Derived Porous Carbon
Li, L., Ma, X., Chen, R., Wang, C., & Lu, M. (2018) · Materials · doi:10.3390/ma11010159 · Cited by 58
Huang, K., Chai, S., Mayes, R. T., Veith, G. M., Browning, K. L., Sakwa‐Novak, M. A., Potter, M. E., Jones, C. W., Wu, Y., & Dai, S. (2015) · Chemical Communications · doi:10.1039/c5cc05619e · Cited by 56
Nitrogen-Doped Mesoporous Carbon for Carbon Capture – A Molecular Simulation Study
Babarao, R., Dai, S., & Jiang, D. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp301450m · Cited by 56
Shi, J., Yan, N., Cui, H., Liu, Y., Weng, Y., Li, D., & Ji, X. (2017) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.08.010 · Cited by 54
de Yuso, A. M., Fina, M. D., Niță, C., Fioux, P., Parmentier, J., & Ghimbeu, C. M. (2016) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2016.12.001 · Cited by 53
Gong, J., Lin, H., Grygiel, K., & Yuan, J. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.02.009 · Cited by 51
Rehman, A., & Park, S. (2017) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.08.016 · Cited by 50
Li, D., Li, W., Shi, J., & Xin, F. W. (2016) · RSC Advances · doi:10.1039/c6ra06620h · Cited by 49
High‐resolution emissions of CO2 from power generation in the USA
Petron, G., Tans, P. P., Frost, G. J., Chao, D. Y., & Trainer, M. (2008) · Journal of Geophysical Research Atmospheres · doi:10.1029/2007jg000602 · Cited by 47
Lei, Y., Luo, Y., Chen, F., et al. (2014) · Polymers · doi:10.3390/polym6071914 · Cited by 45
NEXAFS study and electrical properties of nitrogen-incorporated tetrahedral amorphous carbon films
McCann, R., Roy, S. S., Papakonstantinou, P., Ahmad, I., Maguire, P. D., McLaughlin, J. A., Petaccia, L., Lizzit, S., & Goldoni, A. (2005) · Diamond and Related Materials · doi:10.1016/j.diamond.2005.01.032 · Cited by 45
En-jie, W., Sui, Z., Sun, Y., Ma, Z., & Han, B. (2018) · Langmuir · doi:10.1021/acs.langmuir.7b04370 · Cited by 45
Chang, B., Zhang, S., Yin, H., & Yang, B. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.03.275 · Cited by 44
Sulfur doped microporous carbons for CO 2 adsorption
Shi, J., Yan, N., Cui, H., Liu, Y., & Weng, Y. (2017) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2017.09.002 · Cited by 44
Effect of fluorine doping on structure and CO2 adsorption in silicon carbide-derived carbon
Shahtalebi, A., Mar, M., Guérin, K., & Bhatia, S. K. (2015) · Carbon · doi:10.1016/j.carbon.2015.09.105 · Cited by 43
Electronic and magnetic properties of graphene absorbed with S atom: A first-principles study
Zhou, Y., Zu, X. T., Gao, F., Xiao, H., & Lv, H. (2009) · Journal of Applied Physics · doi:10.1063/1.3130401 · Cited by 41
Biocompatibility of Soft-Templated Mesoporous Carbons
Gencoglu, M. F., Spurri, A., Franko, M., Chen, J., Hensley, D. K., Heldt, C. L., & Saha, D. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am503076u · Cited by 41
Self-citationRehman, A., & Park, S. (2017) · Journal of Solid State Chemistry · doi:10.1016/j.jssc.2017.11.019 · Cited by 40
One-step conversion of agro-wastes to nanoporous carbons: Role in separation of greenhouse gases
Saha, D., Taylor, B., Alexander, N., Joyce, D. F., Faux, G. I., Lin, Y.-T., Shteyn, V., & Orkoulas, G. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2018.02.026 · Cited by 40
Self-citationMeasurement and Analysis of Mixture Adsorption Equilibrium in Porous Solids
Talu, O. (2011) · Chemie Ingenieur Technik · doi:10.1002/cite.201000164 · Cited by 39
Tiwari, D., Bhunia, H., & Bajpai, P. K. (2017) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.08.002 · Cited by 38
Seredych, M., Rodrı́guez-Castellón, E., & Bandosz, T. J. (2016) · Carbon · doi:10.1016/j.carbon.2016.06.028 · Cited by 37
Carbon Dioxide Capturing by Nitrogen-Doping Microporous Carbon
Li, P., Xing, C., Qu, S., Li, B., & Shen, W. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00291 · Cited by 35
Cited by
Adsorption of Carbon Dioxide for post-combustion capture: a review
Raganati, F., Miccio, F., & Ammendola, P. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c01618 · Cited by 661
Nitrogen containing functional groups of biochar: An overview
Leng, L., Xu, S., Liu, R., Yu, T., Zhuo, X., Leng, S., Xiong, Q., & Huang, H. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2019.122286 · Cited by 532
Osman, A. I., Fawzy, S., Farghali, M., El-Azazy, M., Elgarahy, A. M., Fahim, R. A., Maksoud, M. I. A. A., Ajlan, A. A., Yousry, M., Saleem, Y., et al. (2022) · Environmental Chemistry Letters · doi:10.1007/s10311-022-01424-x · Cited by 515
Zeolites as Selective Adsorbents for CO2 Separation
Boer, D. G., Langerak, J., & Pescarmona, P. P. (2023) · ACS Applied Energy Materials · doi:10.1021/acsaem.2c03605 · Cited by 481
Petrovic, B., Gorbounov, M., & Masoudi Soltani, S. (2021) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2020.110751 · Cited by 381
Metadata
- Authors
- Saha, D., & Kienbaum, M. J.
- Venue
- Microporous and Mesoporous Materials
- Publisher
- Elsevier BV
- Published
- 2019-10
- Volume
- 287
- Pages
- 29-55
- ISSN
- 1387-1811 (ISSN-L)
- OpenAlex
- W2945074710
- Cited by
- 275
- References
- 214
- FWCI
- 15.21
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.