Lithium and rubidium extraction from zinnwaldite by alkali digestion process: Sintering mechanism and leaching kinetics
Open accessThe DOI matches its Crossref record.
Abstract
Abstract Lithium and rubidium were extracted from zinnwaldite [KLiFe2 +Al(AlSi3)O10(F,OH)2] by (1) its sintering with and CaCO3 powders and (2) water leaching the obtained sinters—the alkali digestion process. The experimental results showed that sintering proceeded in three partly overlapping stages: (1) decomposition of zinnwaldite at temperature up to 800 °C, (2) formation of new phases in the temperature range between 750 and 835 °C, and (3) formation of amorphous glassy phase at temperature above 835 °C. Densification of the reaction mixture occurred via a liquid phase sintering at temperatures above 750 °C and diffusion of calcium, potassium, silicon and rubidium resulted in the formation of the new phases. The decomposition of zinnwaldite and the formation of the new phases increased extraction of lithium and rubidium. The formation of glassy phase probably hindered extraction of lithium but did not affect that of rubidium because of its outward diffusion to sinter's surface. The optimal extraction efficiencies of 84% of lithium and 91% of rubidium were achieved at sintering temperature of 825 °C and leaching temperature of 95 °C. The good fit of the hyperbolic and uniform reaction models to the leaching data indicated that dissolution of lithium and rubidium proceeded through two stages. Application of the shrinking core model showed that dissolution of lithium was controlled by diffusion. The formation of a layer of Ca(OH)2 on surface of sinters apparently slowed and then terminated dissolution of lithium and rubidium in the later stage of leaching.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Meshram, P., Pandey, B. D., & Mankhand, T. R. (2014) · Hydrometallurgy · doi:10.1016/j.hydromet.2014.10.012 · Cited by 982
“A similar process was reported by Vu et al. (2013) from zinnwaldite by sinteringwith CaCO3 powder at 825 °C, followed by water leaching and precipitation.”
BackgroundMethodInfluentialChoubey, P. K., Kim, M.-S., Srivastava, R. R., Lee, J.-C., & Lee, J.-Y. (2016) · Minerals Engineering · doi:10.1016/j.mineng.2016.01.010 · Cited by 529
Review of Lithium Production and Recovery from Minerals, Brines, and Lithium-Ion Batteries
Meng, F., McNeice, J., Zadeh, S. S., & Ghahreman, A. (2021) · Mineral Processing and Extractive Metallurgy Review · doi:10.1080/08827508.2019.1668387 · Cited by 398
Global Lithium Sources—Industrial Use and Future in the Electric Vehicle Industry: A Review
Kavanagh, L., Keohane, J., Garcia Cabellos, G., Lloyd, A., & Cleary, J. (2018) · Resources · doi:10.3390/resources7030057 · Cited by 389
Recovery of lithium from mineral resources: State-of-the-art and perspectives – A review
Li, H., Eksteen, J., & Kuang, G. (2019) · Hydrometallurgy · doi:10.1016/j.hydromet.2019.105129 · Cited by 256
Metadata
- Authors
- Vu, H., Bernardi, J., Jandová, J., Vaculíková, L., & Goliáš, V.
- Venue
- International Journal of Mineral Processing
- Publisher
- Elsevier BV
- Published
- 2013-09
- Volume
- 123
- Pages
- 9-17
- ISSN
- 0301-7516 (ISSN-L)
- OpenAlex
- W1992555145
- Cited by
- 70
- References
- 0
- FWCI
- 5.76
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Lithium and rubidium extraction from zinnwaldite by alkali digestion process: Sintering mechanism and leaching kinetics. https://app.cochat.ai/papers/10.1016/j.minpro.2013.04.014
- The paper
- Vu, H., Bernardi, J., Jandová, J., Vaculíková, L., & Goliáš, V. (2013). Lithium and rubidium extraction from zinnwaldite by alkali digestion process: Sintering mechanism and leaching kinetics. International Journal of Mineral Processing. https://doi.org/10.1016/j.minpro.2013.04.014
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.