Removal of Cr(VI) from water using pineapple peel derived biochars: Adsorption potential and re-usability assessment
The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.
Abstract
In the present study, biochar was prepared using waste pineapple peel biomass with slow pyrolysis at 350, 450, 550 and 650 °C to explore the effect of temperature treatment on characteristic properties of biochars. Various characterization parameters were analyzed to elucidate the temperature driven changes. Pyrolysis temperature had a significant impact on the properties of the developed biochar, leading to morphological and physiochemical changes. The relationship between pyrolysis temperature and induced physicochemical properties with Cr(VI) adsorption onto biochars was also investigated. Various adsorption parameters as pH (1.5–8), initial Cr(VI) concentration (10–500 mg/L), biochar dose (0.5–10 g/L) and adsorption time (0–96 h) were studied. Freundlich isotherm (R2 = 0.957–0.972) and pseudo-second-order kinetics model (R2 = 0.981–0.994) best fitted the experimental data suggesting multilayer adsorption with chemical interactions between Cr(VI) ions and biochar surface. Biochar prepared at 350 °C was found to have the highest adsorption capacity of 41.67 mg/g among biochars. Complete Cr(VI) removal was achieved at 10 mg/L Cr(VI) concentration with all the biochars. Rather than surface area polarity of biochar was found to be the influencing character of biochar for Cr(VI) adsorption. Feasibility of produced biochars for reuse was also explored. The study suggested that pineapple peel residue can be recycled to biochars with high carbon stability and can be used as a low-cost alternative adsorbent for wastewater treatment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Dynamic Molecular Structure of Plant Biomass-Derived Black Carbon (Biochar)
Keiluweit, M., Nico, P. S., Johnson, M. G., & Kleber, M. (2010) · Environmental Science & Technology · doi:10.1021/es9031419 · Cited by 3,230
Impact of pyrolysis temperature and manure source on physicochemical characteristics of biochar
Cantrell, K. B., Hunt, P. G., Uchimiya, M., Novak, J. M., & Ro, K. S. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2011.11.084 · Cited by 1,502
Surface chemistry variations among a series of laboratory-produced biochars
Mukherjee, A., Zimmerman, A. R., & Harris, W. (2011) · Geoderma · doi:10.1016/j.geoderma.2011.04.021 · Cited by 1,171
Effects of temperature and particle size on bio-char yield from pyrolysis of agricultural residues
Demirbas, A. (2004) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2004.07.003 · Cited by 1,154
Chromium in Drinking Water: Sources, Metabolism, and Cancer Risks
Zhitkovich, A. (2011) · Chemical Research in Toxicology · doi:10.1021/tx200251t · Cited by 1,132
Characterization of biochars to evaluate recalcitrance and agronomic performance
Enders, A., Hanley, K., Whitman, T., Joseph, S., & Lehmann, J. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.03.022 · Cited by 1,113
Sun, Y., Gao, B., Yao, Y., Fang, J., Zhang, M., Zhou, Y., Chen, H., & Yang, L. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.10.081 · Cited by 854
Effect of pyrolysis temperature, heating rate, and residence time on rapeseed stem derived biochar
Zhao, B., O'Connor, D., Zhang, J., Peng, T., Shen, Z., Tsang, D. C. W., & Hou, D. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.11.013 · Cited by 843
Angın, D. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2012.10.150 · Cited by 733
Kim, K. H., Kim, J.-Y., Cho, T.-S., & Choi, J. W. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.04.094 · Cited by 696
Comparison of biochar properties from biomass residues produced by slow pyrolysis at 500°C
Lee, Y., Park, J., Ryu, C., Gang, K. S., Yang, W., Park, Y.-K., Jung, J., & Hyun, S. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2013.08.135 · Cited by 624
Rafiq, M. K., Bachmann, R. T., Rafiq, M. T., Shang, Z., Joseph, S., & Long, R. (2016) · PLOS ONE · doi:10.1371/journal.pone.0156894 · Cited by 376
Kim, P., Johnson, A., Edmunds, C. W., Radosevich, M., Vogt, F., Rials, T. G., & Labbé, N. (2011) · Energy & Fuels · doi:10.1021/ef200915s · Cited by 293
Effect of porous zinc–biochar nanocomposites on Cr( vi ) adsorption from aqueous solution
Gan, C., Liu, Y., Tan, X., Wang, S., Zeng, G., Zheng, B., Li, T., Jiang, Z., & Liu, W. (2015) · RSC Advances · doi:10.1039/c5ra04416b · Cited by 285
Contribution to characterisation of biochar to estimate the labile fraction of carbon
Calvelo Pereira, R., Kaal, J., Camps Arbestain, M., Pardo Lorenzo, R., Aitkenhead, W., Hedley, M., Macías, F., Hindmarsh, J., & Maciá-Agulló, J. A. (2011) · Organic Geochemistry · doi:10.1016/j.orggeochem.2011.09.002 · Cited by 271
Agronomic properties of biochars from different manure wastes
Cely, P., Gascó, G., Paz-Ferreiro, J., & Méndez, A. (2015) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.11.014 · Cited by 224
Removal of Cr(VI) from synthetic wastewater by adsorption onto coffee ground and mixed waste tea
Cherdchoo, W., Nithettham, S., & Charoenpanich, J. (2019) · Chemosphere · doi:10.1016/j.chemosphere.2019.01.100 · Cited by 204
Removal of hexavalent Cr by coconut coir and derived chars – The effect of surface functionality
Shen, Y.-S., Wang, S.-L., Tzou, Y.-M., Yan, Y.-Y., & Kuan, W.-H. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2011.10.096 · Cited by 184
Cited by
Review of organic and inorganic pollutants removal by biochar and biochar-based composites
Liang, L., Xi, F., Tan, W., Meng, X., Hu, B., & Wang, X. (2021) · Biochar · doi:10.1007/s42773-021-00101-6 · Cited by 662
“Pineapple peel Pyrolysis of biomass pretreated with FeCl3 ZVI and γ-Fe2O3 Cr(VI) Shakya and Agarwal (2019)”
MethodJjagwe, J., Olupot, P. W., Menya, E., & Kalibbala, H. M. (2021) · Journal of Bioresources and Bioproducts · doi:10.1016/j.jobab.2021.03.003 · Cited by 616
Biochar for Wastewater Treatment—Conversion Technologies and Applications
Enaime, G., Baçaoui, A., Yaacoubi, A., & Lübken, M. (2020) · Applied Sciences · doi:10.3390/app10103492 · Cited by 507
On validity, physical meaning, mechanism insights and regression of adsorption kinetic models
Vareda, J. P. (2023) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2023.121416 · Cited by 380
Qiu, Y., Zhang, Q., Gao, B., Li, M., Fan, Z., Sang, W., Hao, H., & Wei, X. (2020) · Environmental Pollution · doi:10.1016/j.envpol.2020.115018 · Cited by 304
Metadata
- Authors
- Shakya, A., & Agarwal, T.
- Venue
- Journal of Molecular Liquids
- Publisher
- Elsevier BV
- Published
- 2019-11
- Volume
- 293
- Pages
- 111497
- ISSN
- 0167-7322 (ISSN-L)
- OpenAlex
- W2965698167
- Cited by
- 247
- References
- 18
- FWCI
- 10.21
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.