The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Influence of heat treatments on microstructure evolution and mechanical properties of Inconel 625 processed by laser powder bed fusion
Open accessAbstract
This study investigated the mechanical behaviour and microstructure of as-built and heat-treated Inconel 625 (IN625) samples processed by laser powder bed fusion (LPBF). This process offers freedom in design to build complex IN625 components in order to overcome extensive machining. However, post heat treatments must be performed to obtain specific mechanical properties to match industrial requirements. For this purpose, different heat treatments were performed on IN625 samples, and through hardness measurements, three different heat treatments were selected, as optimised conditions. A direct ageing, a solutioning and a solutioning followed by ageing treatments were chosen to study the effects of these specific heat treatments on the microstructure and tensile properties, comparing them to those of as-built condition. The tensile properties of as-built and selected heat-treated IN625 samples showed superior values to minimum requirements for wrought IN625 alloys, whereas the investigation on the microstructures and fracture surfaces of as-built and heat-treated IN625 contributed to an understanding of the tensile properties evolution. The high tensile strength of as-built samples essentially derived from very fine dendritic structures mainly below 1 µm with high dislocation density and nanometric MC carbides. The high tensile properties of ageing treatments performed at 700 °C for 24 h, whether directly aged or post-solutioning, were found to be primarily dependent on γ" phases (10–30 nm) and M23C6 carbides formation. By contrast, the tensile properties of solution-treated IN625 samples at 1150 °C for 2 h showed higher ductility coupled to lower strength than other conditions, due to the grain growth.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
Key improvements in the machining of difficult-to-cut aerospace superalloys
Ezugwu, E. O. (2005) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2005.02.003 · Cited by 945
Jia, Q., & Gu, D. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.09.171 · Cited by 905
Dinda, G. P., Dasgupta, A. K., & Mazumder, J. (2009) · Materials Science and Engineering: A · doi:10.1016/j.msea.2009.01.009 · Cited by 858
Chlebus, E., Gruber, K., Kuźnicka, B., Kurzac, J., & Kurzynowski, T. (2015) · Materials Science and Engineering A · doi:10.1016/j.msea.2015.05.035 · Cited by 787
Zhang, D., Niu, W., Cao, X., & Liu, Z. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.06.021 · Cited by 723
Harrison, N. J., Todd, I., & Mumtaz, K. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.04.035 · Cited by 690
Machinability of nickel-base super alloys: a general review
Choudhury, I. A., & El-Baradie, M. A. (1998) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(97)00429-9 · Cited by 621
Popovich, V., Borisov, E. V., Popovich, A., Sufiiarov, V. S., Masaylo, D. V., & Alzina, L. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.10.075 · Cited by 580
Cited by
Powder Bed Fusion of nickel-based superalloys: A review
Sanchez, S., Smith, P., Xu, Z., Gaspard, G., Hyde, C. J., Wits, W. W., Ashcroft, I. A., Chen, H., & Clare, A. T. (2021) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2021.103729 · Cited by 541
Mostafaei, A., Ghiaasiaan, R., Ho, I.-T., Strayer, S., Chang, K.-C., Shamsaei, N., Shao, S., Paul, S., Yeh, A.-C., Tin, S., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101108 · Cited by 531
Progress and perspectives in laser additive manufacturing of key aeroengine materials
Tan, C., Weng, F., Sui, S., Chew, Y., & Bi, G. (2021) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2021.103804 · Cited by 520
Sword, J. I., Galloway, A., & Toumpis, A. (2024) · Sustainability · doi:10.3390/su16104178 · Cited by 14
Metadata
- Authors
- Marchese, G., Lorusso, M., Parizia, S., Bassini, E., Lee, J.-W., Calignano, F., Manfredi, D., Terner, M., Hong, H.-U., Ugues, D., Lombardi, M., & Biamino, S.
- Venue
- Materials Science and Engineering: A
- Publisher
- Elsevier BV
- Published
- 2018-06
- Volume
- 729
- Pages
- 64-75
- ISSN
- 0921-5093 (ISSN-L)
- OpenAlex
- W2803640542
- Cited by
- 290
- References
- 21
- FWCI
- 13.75
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Influence of heat treatments on microstructure evolution and mechanical properties of Inconel 625 processed by laser powder bed fusion. https://app.cochat.ai/papers/10.1016/j.msea.2018.05.044
- The paper
- Marchese, G., Lorusso, M., Parizia, S., Bassini, E., Lee, J.-W., Calignano, F., Manfredi, D., Terner, M., Hong, H.-U., Ugues, D., Lombardi, M., & Biamino, S. (2018). Influence of heat treatments on microstructure evolution and mechanical properties of Inconel 625 processed by laser powder bed fusion. Materials Science and Engineering: A. https://doi.org/10.1016/j.msea.2018.05.044
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.