The DOI matches its Crossref record.
Heat treatment effect on the mechanical properties and fracture mechanism in AlSi10Mg fabricated by additive manufacturing selective laser melting process
Abstract
Many researches have been conducted on the topic of the AlSi10Mg alloy, covering different aspects of the selective laser melting fabrication process. However, a database is still lacking much information and understanding regarding the properties of the material under different conditions, which will allow a tailoring of suitable properties to the required application. This work aims to provide a correlation between the mechanical properties of vertically built (Z samples) AlSi10Mg specimens subjected to different post-processing conditions and the change in properties in relation to these conditions and the fracture mechanism. Among these is the accepted T5 stress relief treatment, a modified T5 treatment, the as-built condition and a high temperature Hot Isostatic Pressing treatment. A more in-depth analysis of the fracture mode for the vertical build direction is provided with emphasis on the mechanism for each treatment as well as a quantitative analysis of the Full Width at Half Maximum via X-Ray diffraction measurements. The modified T5 treatment suggested was found to result in an increase in strength values beyond those of the as-built condition and a 64% increase in yield stress compared to the typical T5 treatment with a concurrent decrease in elongation values. It is suggested that at 200 °C nano-scale precipitation of Silicon particles occurs, responsible for the strength elevation. Charpy impact test results are provided for each condition and their fracture mode is compared to the tensile tests and discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Heat treatment for metal additive manufacturing
Laleh, M., Sadeghi, E., Revilla, R. I., Chao, Q., Haghdadi, N., Hughes, A. E., Xu, W., De Graeve, I., Qian, M., Gibson, I., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101051 · Cited by 538
About metastable cellular structure in additively manufactured austenitic stainless steels
Kong, D., Dong, C., Wei, S., Ni, X., Zhang, L., Li, R., Wang, L., Man, C., & Li, X. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2020.101804 · Cited by 528
Liu, Q., Wu, H., Paul, M. J., He, P., Peng, Z., Gludovatz, B., Kruzic, J. J., Wang, C. H., & Li, X. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.10.010 · Cited by 321
Kan, W. H., Chiu, L. N. S., Lim, C. V. S., Zhu, Y., Tian, Y., Jiang, D., & Huang, A. (2022) · Journal of Materials Science · doi:10.1007/s10853-022-06990-7 · Cited by 309
Zhao, L., Song, L., Santos Macías, J. G., Zhu, Y., Huang, M., Simar, A., & Li, Z. (2022) · Additive Manufacturing · doi:10.1016/j.addma.2022.102914 · Cited by 292
Metadata
- Authors
- Rosenthal, I., Shneck, R., & Stern, A.
- Venue
- Materials Science and Engineering: A
- Publisher
- Elsevier BV
- Published
- 2018-06
- Volume
- 729
- Pages
- 310-322
- ISSN
- 0921-5093 (ISSN-L)
- OpenAlex
- W2804707686
- Cited by
- 240
- References
- 0
- FWCI
- 12.79
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Heat treatment effect on the mechanical properties and fracture mechanism in AlSi10Mg fabricated by additive manufacturing selective laser melting process. https://app.cochat.ai/papers/10.1016/j.msea.2018.05.074
- The paper
- Rosenthal, I., Shneck, R., & Stern, A. (2018). Heat treatment effect on the mechanical properties and fracture mechanism in AlSi10Mg fabricated by additive manufacturing selective laser melting process. Materials Science and Engineering: A. https://doi.org/10.1016/j.msea.2018.05.074
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.