High entropy alloys – Tunability of deformation mechanisms through integration of compositional and microstructural domains
Open accessThe DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
The paradigm shift of alloying approach that led to high entropy alloys (HEAs) is now well established. Although the initial years were dominated by equiatomic approach, recent years have seen expansion in non-equiatomic compositional space that can be termed as complex concentrated alloys (CCAs). These HEAs/CCAs provide opportunities for tunable performance by manipulating deformation mechanisms. Understanding has advanced to the point that certain aspects of core effects (entropy of mixing, lattice distortion, sluggish diffusion, and cocktail effect) can be critically examined. In addition, new aspects of metastability engineering and emergence of a wide range of processing strategies has put this field on an exponential growth path. In this review, we categorize the compositional and microstructural approaches that exhibit potential for a combination of shear induced phase transformation and twinning, thereby expanding beyond the slip based mechanisms. The emerging HEAs give greater flexibility for tailoring transformation-induced plasticity (TRIP) and twinning-induced plasticity (TWIP), which have guided design of next-generation steels over the last 20 years to a new level. For TRIP HEAs, the ductility can be extended to as high as 50% while maintaining a strength exceeding 1 GPa. On the other hand, hierarchical microstructural engineering in AlxCoCrFeNi alloys can lead to over 2 GPa strength and >10% ductility. Observations of evolving c/a ratio in HCP phase of certain HEAs hint at possibility of new micromechanisms. While crack tip twin-bridging has been shown as a key mechanism to extend the toughness, concurrent phase transformation at the crack tip has been shown to push the fatigue endurance limit. Tunability of deformation mechanisms in HEAs is unprecedented as compared to the conventional metallic materials, particularly in compositions that exhibit shear induced transformation. The opportunities can be further enhanced by integrating the compositional and microstructure domains, and these aspects are highlighted in this review. The microstructural tailoring can take advantage of high enthalpy states in metastable HEAs with low stacking fault energy values of < 40 mJ m−2. The range of microstructural engineering in HEAs include, heterogeneous grain structure, duplex and triplex microstructures with intermetallic phases, twinning engineered microstructure, coherent boundary engineered microstructure, and dual-phase and triple-phase microstructure with solid solution phases.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
George, E. P., Raabe, D., & Ritchie, R. O. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0121-4 · Cited by 5,047
Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes
Lei, Z., Liu, X., Wu, Y., Wang, H., Jiang, S., Wang, S., Hui, X., Wu, Y., Gault, B., Kontis, P., et al. (2018) · Nature · doi:10.1038/s41586-018-0685-y · Cited by 1,764
Tuning element distribution, structure and properties by composition in high-entropy alloys
Ding, Q., Zhang, Y., Chen, X., Fu, X., Chen, D., Chen, S., Gu, L., Wei, F., Bei, H., Gao, Y., et al. (2019) · Nature · doi:10.1038/s41586-019-1617-1 · Cited by 1,614
A hexagonal close-packed high-entropy alloy: The effect of entropy
Zhao, Y. J., Qiao, J. W., Ma, S. G., Gao, M. C., Yang, H. J., Chen, M. W., & Zhang, Y. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.149 · Cited by 446
Cited by
Refractory high-entropy alloys: A focused review of preparation methods and properties
Xiong, W., Guo, A. X. Y., Zhan, S., Liu, C.-T., & Cao, S. C. (2023) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2022.08.046 · Cited by 429
Metadata
- Authors
- Mishra, R. S., Haridas, R. S., & Agrawal, P.
- Venue
- Materials Science and Engineering: A
- Publisher
- Elsevier BV
- Published
- 2021-04
- Volume
- 812
- Pages
- 141085
- ISSN
- 0921-5093 (ISSN-L)
- OpenAlex
- W3137792758
- Cited by
- 176
- References
- 5
- FWCI
- 11.93
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: High entropy alloys – Tunability of deformation mechanisms through integration of compositional and microstructural domains. https://app.cochat.ai/papers/10.1016/j.msea.2021.141085
- The paper
- Mishra, R. S., Haridas, R. S., & Agrawal, P. (2021). High entropy alloys – Tunability of deformation mechanisms through integration of compositional and microstructural domains. Materials Science and Engineering: A. https://doi.org/10.1016/j.msea.2021.141085
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.