The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
Development of 3D printable conductive hydrogel with crystallized PEDOT:PSS for neural tissue engineering
Open accessAbstract
Bioelectronic devices enable efficient and effective communication between medical devices and human tissue in order to directly treat patients with various neurological disorders. Due to the mechanical similarity to human tissue, hydrogel-based electronic devices are considered to be promising for biological signal recording and stimulation of living tissues. Here, we report the first three-dimensionally (3D) printable conductive hydrogel that can be photocrosslinked while retaining high electrical conductivity. In addition, we prepared dorsal root ganglion (DRG) cell-encapsulated gelatin methacryloyl (GelMA) hydrogels which were integrated with the 3D printed conductive structure and evaluated for efficiency neural differentiation under electrical stimulation (ES). For enhanced electrical conductivity, a poly(3,4-ethylenedioxythiophene) (PEDOT): polystyrene sulfonate (PSS) aqueous solution was freeze-dried and mixed with polyethylene glycol diacrylate (PEGDA) as the photocurable polymer base. Next, the conductive hydrogel was patterned on the substrate by using a table-top stereolithography (SLA) 3D printer. The fabricated hydrogel was characterized for electrochemical conductivity. After printing with the PEDOT:PSS conductive solution, the patterned hydrogel exhibited decreased printing diameters with increasing of PEDOT:PSS concentration. Also, the resultant conductive hydrogel had significantly increased electrochemical properties with increasing PEDOT:PSS concentration. The 3D printed conductive hydrogel provides excellent structural support to systematically transfer the ES toward encapsulated DRG cells for enhanced neuronal differentiation. The results from this study indicate that the conductive hydrogel can be useful as a 3D printing material for electrical applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Conductive polymers: Towards a smart biomaterial for tissue engineering
Balint, R., Cassidy, N. J., & Cartmell, S. H. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.02.015 · Cited by 1,777
Highly Conductive PEDOT:PSS Nanofibrils Induced by Solution‐Processed Crystallization
Kim, N., Kee, S., Lee, S. H., Lee, B. H., Kahng, Y. H., Jo, Y., Kim, B., & Lee, K. (2014) · Advanced Materials · doi:10.1002/adma.201304611 · Cited by 1,148
Self-citationRecent Advances in Flexible and Stretchable Bio‐Electronic Devices Integrated with Nanomaterials
Choi, S., Lee, H., Ghaffari, R., Hyeon, T., & Kim, D. (2016) · Advanced Materials · doi:10.1002/adma.201504150 · Cited by 1,104 · cited 1×
“In addition, electrically conductive polymers can enhance the composite biomaterial-tissue interface and modulate desired cell responses such as proliferation and differentiation [13-17].”
Background“Green” electronics: biodegradable and biocompatible materials and devices for sustainable future
Irimia-Vladu, M. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60235d · Cited by 1,044
Electrically conductive polymers and composites for biomedical applications
Kaur, G., Adhikari, R., Cass, P., Bown, M., & Gunatillake, P. (2015) · RSC Advances · doi:10.1039/c5ra01851j · Cited by 836
Jakus, A. E., Secor, E. B., Rutz, A. L., Jordan, S. W., Hersam, M. C., & Shah, R. N. (2015) · ACS Nano · doi:10.1021/acsnano.5b01179 · Cited by 710
Enhanced Differentiation of Human Neural Stem Cells into Neurons on Graphene
Park, S. Y., Park, J., Sim, S. H., Sung, M. G., Kim, K. S., Hong, B. H., & Hong, S. (2011) · Advanced Materials · doi:10.1002/adma.201101503 · Cited by 703
Ghasemi-Mobarakeh, L., Prabhakaran, M. P., Morshed, M., Nasr-Esfahani, M. H., Baharvand, H., Kiani, S., Al-Deyab, S. S., & Ramakrishna, S. (2011) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.383 · Cited by 698
Conducting polymers for neural interfaces: Challenges in developing an effective long-term implant
Green, R. A., Lovell, N. H., Wallace, G. G., & Poole-Warren, L. A. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.04.047 · Cited by 691
Review on application of PEDOTs and PEDOT:PSS in energy conversion and storage devices
Sun, K., Zhang, S., Li, P., Xia, Y., Zhang, X., Du, D., Isikgor, F. H., & Ouyang, J. (2015) · Journal of Materials Science: Materials in Electronics · doi:10.1007/s10854-015-2895-5 · Cited by 648
Biodegradable and electrically conducting polymers for biomedical applications
Guo, B., Glavas, L., & Albertsson, A.-C. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.06.003 · Cited by 592
Kotwal, A. (2001) · Biomaterials · doi:10.1016/s0142-9612(00)00344-6 · Cited by 518
Conductive polymer-based sensors for biomedical applications
Nambiar, S., & Yeow, J. T. W. (2011) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2010.09.046 · Cited by 513
Applications of conducting polymers and their issues in biomedical engineering
Ravichandran, R., Sundarrajan, S., Venugopal, J. R., Mukherjee, S., & Ramakrishna, S. (2010) · Journal of The Royal Society Interface · doi:10.1098/rsif.2010.0120.focus · Cited by 429
Electrical Stimulation: A Novel Tool for Tissue Engineering
Balint, R., Cassidy, N. J., & Cartmell, S. H. (2013) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2012.0183 · Cited by 405
A Strain‐Insensitive Stretchable Electronic Conductor: PEDOT:PSS/Acrylamide Organogels
Lee, Y., Kang, H., Gwon, S. H., Choi, G. M., Lim, S., Sun, J., & Joo, Y. (2016) · Advanced Materials · doi:10.1002/adma.201504606 · Cited by 332
Enhanced bone regeneration with a gold nanoparticle–hydrogel complex
Heo, D. N., Ko, W.-K., Bae, M. S., Lee, J. B., Lee, D.-W., Byun, W., Lee, C. H., Kim, E.-C., Jung, B.-Y., & Kwon, I. K. (2014) · J. Mater. Chem. B · doi:10.1039/c3tb21246g · Cited by 290
Self-citationPires, F., Ferreira, Q., Rodrigues, C. A. V., Morgado, J., & Ferreira, F. C. (2015) · Biochimica et Biophysica Acta (BBA) - General Subjects · doi:10.1016/j.bbagen.2015.01.020 · Cited by 276
Peripheral nervous system defects in erbB2 mutants following genetic rescue of heart development
Woldeyesus, M. T., Britsch, S., Riethmacher, D., Xu, L., Sonnenberg-Riethmacher, E., Abou-Rebyeh, F., Harvey, R., Caroni, P., & Birchmeier, C. (1999) · Genes & Development · doi:10.1101/gad.13.19.2538 · Cited by 256
3D printing nano conductive multi-walled carbon nanotube scaffolds for nerve regeneration
Lee, S.-J., Zhu, W., Nowicki, M., Lee, G., Heo, D. N., Kim, J., Zuo, Y. Y., & Zhang, L. G. (2018) · Journal of Neural Engineering · doi:10.1088/1741-2552/aa95a5 · Cited by 237
Self-citationCastro, N. J., O'Brien, J., & Zhang, L. G. (2015) · Nanoscale · doi:10.1039/c5nr03425f · Cited by 209
Self-citationConductive Hydrogels: Mechanically Robust Hybrids for Use as Biomaterials
Green, R. A., Hassarati, R. T., Goding, J. A., Baek, S., Lovell, N. H., Martens, P. J., & Poole‐Warren, L. A. (2012) · Macromolecular Bioscience · doi:10.1002/mabi.201100490 · Cited by 203
Electrical Stimulation Modulates Fate Determination of Differentiating Embryonic Stem Cells
Yamada, M., Tanemura, K., Okada, S., Iwanami, A., Nakamura, M., Mizuno, H., Ozawa, M., Ohyama-Goto, R., Kitamura, N., Kawano, M., et al. (2007) · Stem Cells · doi:10.1634/stemcells.2006-0011 · Cited by 189
Jo, H., Sim, M., Kim, S., Yang, S., Yoo, Y., Park, J.-H., Yoon, T. H., Kim, M.-G., & Lee, J. Y. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.10.035 · Cited by 188
Oh, J. Y., Shin, M., Lee, J. B., Ahn, J.-H., Baik, H. K., & Jeong, U. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am500769k · Cited by 179
Differentiation of human neural stem cells into neural networks on graphene nanogrids
Akhavan, O., & Ghaderi, E. (2013) · Journal of Materials Chemistry B · doi:10.1039/c3tb21085e · Cited by 173
Yang, S., Jang, L., Kim, S., Yang, J., Yang, K., Cho, S.-W., & Lee, J. Y. (2016) · Macromolecular Bioscience · doi:10.1002/mabi.201600148 · Cited by 173
Guided Migration of Neural Stem Cells Derived from Human Embryonic Stem Cells by an Electric Field
Feng, J.-F., Liu, J., Zhang, X.-Z., Zhang, L., Jiang, J.-Y., Nolta, J., & Zhao, M. (2012) · Stem Cells · doi:10.1002/stem.779 · Cited by 161
Self-citationHeo, D. N., Castro, N. J., Lee, S., Noh, H., Zhu, W., & Zhang, L. G. (2017) · Nanoscale · doi:10.1039/c6nr09652b · Cited by 155
Self-citationLin, Y., Ro, L. S., Wang, H., & Chen, J. (2011) · Journal of Neuroinflammation · doi:10.1186/1742-2094-8-126 · Cited by 149
Chang, K.-A., Kim, J. W., Kim, J. A., Lee, S., Kim, S., Suh, W. H., Kim, H.-S., Kwon, S., Kim, S. J., & Suh, Y. (2011) · PLoS ONE · doi:10.1371/journal.pone.0018738 · Cited by 137
Self-citationZhu, W., Ye, T., Lee, S., Cui, H., Miao, S., Zhou, X., Shuai, D., & Zhang, L. G. (2017) · Nanomedicine Nanotechnology Biology and Medicine · doi:10.1016/j.nano.2017.03.018 · Cited by 113
Self-citationSecondary doping in poly(3,4‐ethylenedioxythiophene):Poly(4‐styrenesulfonate) thin films
Nevřela, J., Micjan, M., Novota, M., Kováčová, S., Pavúk, M., Juhasz, P., Kováč, J., Jakabovič, J., & Weis, M. (2015) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.23754 · Cited by 110
Advances in 3D Bioprinting for Neural Tissue Engineering
Lee, S., Esworthy, T. J., Stake, S., Miao, S., Zuo, Y. Y., Harris, B. T., & Zhang, L. G. (2018) · Advanced Biosystems · doi:10.1002/adbi.201700213 · Cited by 99
Self-citationDevelopment of Novel 3-D Printed Scaffolds With Core-Shell Nanoparticles for Nerve Regeneration
Lee, S., Zhu, W., Heyburn, L., Nowicki, M. A., Harris, B. T., & Zhang, L. G. (2016) · IEEE Transactions on Biomedical Engineering · doi:10.1109/tbme.2016.2558493 · Cited by 82
Self-citationA Cytocompatible Robust Hybrid Conducting Polymer Hydrogel for Use in a Magnesium Battery
Yu, C., Wang, C., Liu, X., Jia, X., Naficy, S., Shu, K., Forsyth, M., & Wallace, G. G. (2016) · Advanced Materials · doi:10.1002/adma.201601755 · Cited by 77
Thrivikraman, G., Madras, G., & Basu, B. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.078 · Cited by 75
Micropatterning PEDOT:PSS layers
Charlot, B., Sassine, G., Garraud, A., Sorli, B., Giani, A., & Combette, P. (2012) · Microsystem Technologies · doi:10.1007/s00542-012-1696-5 · Cited by 68
Ouyang, S., Xie, Y., Wang, D., Zhu, D., Xu, X., Tan, T., DeFranco, J. A., & Fong, H. H. (2014) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.23547 · Cited by 30
Endogenous neurotrophin-3 promotes neuronal sprouting from dorsal root ganglia
Tian, H., Hu, W., Wang, X., Gu, P., Chen, S., Gao, W., Lu, X., Zheng, W., & Zhuge, Q. (2015) · Neural Regeneration Research · doi:10.4103/1673-5374.170318 · Cited by 10
Cited by
Progress in 3D bioprinting technology for tissue/organ regenerative engineering
Matai, I., Kaur, G., Seyedsalehi, A., McClinton, A., & Laurencin, C. T. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2019.119536 · Cited by 1,156
3D printing of conducting polymers
Yuk, H., Lu, B., Lin, S., Qu, K., Xu, J., Luo, J., & Zhao, X. (2020) · Nature Communications · doi:10.1038/s41467-020-15316-7 · Cited by 1,001
Functional Conductive Hydrogels for Bioelectronics
Fu, F., Wang, J., Zeng, H., & Yu, J. (2020) · ACS Materials Letters · doi:10.1021/acsmaterialslett.0c00309 · Cited by 364
3D printing of electrically conductive hydrogels for tissue engineering and biosensors – A review
Distler, T., & Boccaccini, A. R. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.08.044 · Cited by 326
Vat photopolymerization of polymers and polymer composites: Processes and applications
Al Rashid, A., Ahmed, W., Khalid, M. Y., & Koç, M. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2021.102279 · Cited by 326
Metadata
- Authors
- Heo, D. N., Lee, S.-J., Timsina, R., Qiu, X., Castro, N. J., & Zhang, L. G.
- Venue
- Materials Science and Engineering: C
- Publisher
- Elsevier BV
- Published
- 2019-06
- Volume
- 99
- Pages
- 582-590
- ISSN
- 0928-4931 (ISSN-L)
- OpenAlex
- W2915030760
- Cited by
- 271
- References
- 40
- FWCI
- 13.10
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.