The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Adsorption capacity of heavy metal ions using sultone-modified magnetic activated carbon as a bio-adsorbent
Abstract
A novel magnetic bio-adsorbent has been prepared by the loading of Fe3O4 NPs and immobilization of 1,4-butane sultone on the surface of activated carbon. The activated carbon was synthesized from pistachio shell as a carbon material of biogenic, bio-resources and its use is cost effective. Structure, morphology and magnetic property of the prepared adsorbent were studied by transmission electron microscopy (TEM), vibrating sample magnetometer (VSM), Fourier transform infrared spectroscopy (FT-IR), and thermal gravimetric analysis (TGA). The capacity of the adsorbent for removing heavy metals ions Pb(II), As(III) and Cd(II) was studied using Langmuir adsorption isotherm under ultrasound-assisted condition. The maximum adsorption capacities of Pb(II), As(III) and Cd(II) were found to be 147.05, 151.51 and 119.04 mg g-1, respectively. In addition to high adsorption capacity, this adsorbent shows advantages such as green synthesis, low cast, recyclability, and easy separation. So this nanocomposite can be a suitable absorbent for removal of heavy metal ions from aqueous solutions. Meanwhile, the use of ultrasound radiation is an effective and rapid uptake technology for separating of heavy metal ions from aqueous solutions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Natural zeolites as effective adsorbents in water and wastewater treatment
Wang, S., & Peng, Y. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.10.029 · Cited by 2,441
Research works printed but not linked: 51
- Haroun, 2011, Preparation and evaluation of novel interpenetrating polymer network-based on newspaper pulp for removal of copper ions, Polym.-Plast. Technol., 50, 232, 10.1080/03602559.2010.531435 · DOI
- Haroun, 2013, Novel nanocomposites based on gelatin/HPET/chitosan with high performance acid red 150 dye adsorption, Clean Techn. Environ. Policy, 15, 367, 10.1007/s10098-012-0525-y · doi:10.1007/s10098-012-0525-y
- Kardam, 2014, Nanocellulose fibers for biosorption of cadmium, nickel, and lead ions from aqueous solution, Policy Clean Technol. Environ., 16, 385, 10.1007/s10098-013-0634-2 · DOI · Paper page
- Huang, 2017, Surface functionalized SiO2 nanoparticles with cationic polymers via the combination of mussel inspired chemistry and surface initiated atom transfer radical polymerization: characterization and enhanced removal of organic dye, J. Colloid Interface Sci., 499, 170, 10.1016/j.jcis.2017.03.102 · DOI · Paper page
- Huang, 2017, Facile preparation of MoS2 based polymer composites via mussel inspired chemistry and their high efficiency for removal of organic dyes, Appl. Surf. Sci., 419, 35, 10.1016/j.apsusc.2017.05.006 · DOI · Paper page
- Zhang, 2015, Preparation of amine functionalized carbon nanotubes via a bioinspired strategy and their application in Cu2+ removal, Appl. Surf. Sci., 343, 19, 10.1016/j.apsusc.2015.03.081 · DOI · Paper page
- Gupta, 2004, Removal of lead and chromium from wastewater using bagasse fly ash-a sugar industry waste, J. Colloid Interface Sci., 27, 21
- Hebeish, 2011, An effective adsorbent based on sawdust for removal of direct dye from aqueous solutions, Clean Techn. Environ. Policy, 13, 713, 10.1007/s10098-010-0343-z · doi:10.1007/s10098-010-0343-z
- Chouchene, 2014, Biosorption performance, combustion behavior, and leaching characteristics of olive solid waste during the removal of copper and nickel from aqueous solutions, Clean Techn. Environ. Policy, 16, 979, 10.1007/s10098-013-0680-9 · DOI
- Wang, 2017, Single and binary adsorption of heavy metal ions from aqueous solutions using sugarcane cellulose-based adsorbent, Bioresour. Technol., 241, 482, 10.1016/j.biortech.2017.05.162 · DOI · Paper page
- Li, 2018, Novel composite adsorbent consisting of dissolved cellulose fiber/microfibrillated cellulose for dye removal from aqueous solution, ACS Sustain. Chem. Eng., 6, 6994, 10.1021/acssuschemeng.8b00829 · DOI
- Wang, 2017, Microstructures and speciation of radionuclides in natural environment studied by advanced spectroscopy and theoretical calculation, Sci. China Chem., 60, 1149, 10.1007/s11426-017-9039-2 · doi:10.1007/s11426-017-9039-2
- Xie, 2019, Emerging natural and tailored materials for uranium-contaminated water treatment and environmental remediation, Mater. Sci., 103, 180
- Wu, 2019, Environmental remediation of heavy metal ions by novel-nanomaterials: a review, Environ. Pollut., 246, 608, 10.1016/j.envpol.2018.12.076 · DOI · Paper page
- Zhang, 2015, Synthesis of magnetite-graphene oxide-layered double hydroxide composites and applications for the removal of Pb(II) and 2,4-dichlorophenoxyacetic acid from aqueous solutions, ACS Appl. Mater. Interfaces, 16, 7251, 10.1021/acsami.5b00433 · DOI
- Tan, 2015, Adsorption of Cu(II), Cd(II) and Ni(II) from aqueous single metal solutions on graphene oxide membranes, J. Hazard. Mater., 297, 251−260, 10.1016/j.jhazmat.2015.04.068 · DOI · Paper page
- Wang, 2016, Application of graphene oxides and graphene oxide-based nanomaterials in radionuclide removal from aqueous solutions, Sci. Bull., 61, 1583, 10.1007/s11434-016-1168-x · DOI
- Kamandari, 2014, Experimental and modeling study on production of activated carbon from pistachio shells in rotary reactor, Res. Chem. Intermed., 40, 509, 10.1007/s11164-012-0978-y · DOI
- Paraskeva, 2008, Diamadopoulos, production of activated carbon from agricultural by-products, J. Chem. Technol. Biotechnol., 83, 581, 10.1002/jctb.1847 · DOI
- Dolores, 2013, Porous biomass- derived carbons: activated carbons, vol. 1, 100
- Tamez, 2016, Removal of Cu (II) and Pb (II) from aqueous solution using engineered iron oxide nanoparticles, Microchem. J., 125, 97, 10.1016/j.microc.2015.10.028 · DOI
- Sharifpour, 2018, Isotherms and kinetic study of ultrasound-assisted adsorption of malachite green and Pb2+ ions from aqueous samples by copper sulfide nanorods loaded on activated carbon: experimental design optimization, Ultrason. Sonochem., 40, 373, 10.1016/j.ultsonch.2017.07.030 · DOI · Paper page
- Sharma, 2010, Engineering data for optimization of preparation of activated carbon from an economically viable material, J. Chem. Eng. Data, 55, 3991, 10.1021/je100041x · DOI
- Yang, 2006, Textural and chemical properties of zinc chloride activated carbons prepared from pistachio-nut shells, Mater. Chem. Phys., 100, 438, 10.1016/j.matchemphys.2006.01.039 · DOI · Paper page
- Tavakoli Foroushani, 2016, An investigation on the effect of KMnO4 on the pore characteristics of pistachio nut shell based activated carbon, Microporous Mesoporous Mater., 230, 39, 10.1016/j.micromeso.2016.04.030 · DOI
- Lua, 2004, Effects of vacuum pyrolysis conditions on the characteristics of activated carbons derived from pistachio-nut shells, J. Colloid Interface Sci., 276, 364, 10.1016/j.jcis.2004.03.071 · DOI
- Zhang, 2017, Mussel-inspired fabrication of functional materials and their environmental applications: progress and prospects, Appl. Mater. Today, 7, 222, 10.1016/j.apmt.2017.04.001 · DOI · Paper page
- Venkateswarlu, 2016, Bioinspired 2D-carbon flakes and Fe3O4 nanoparticles composite for arsenite removal, ACS Appl. Mater. Interfaces, 8, 23876, 10.1021/acsami.6b03583 · DOI · Paper page
- Hua, 2018, Adsorption of low-concentration arsenic from water by co-modified bentonite with manganese oxides and poly (dimethyldiallylammonium chloride), J. Enviro. Chem. Eng., 6, 156, 10.1016/j.jece.2017.11.062 · DOI
- Liu, 2010, Arsenate removal from water using Fe3O4-loaded activated carbon prepared from waste biomass, Chem. Eng. J., 160, 57, 10.1016/j.cej.2010.03.003 · DOI · Paper page
- Guedidi, 2013, The effects of the surface oxidation of activated carbon, the solution pH and the temperature on adsorption of ibuprofen, Carbon, 54, 432, 10.1016/j.carbon.2012.11.059 · DOI · Paper page
- Yao, 2016, Adsorption of Eu(III) on sulfonated graphene oxide: combined macroscopic and modeling techniques, J. Mol. Liq., 215, 443, 10.1016/j.molliq.2015.11.030 · doi:10.1016/j.molliq.2015.11.030
- Guijarro-Aldaco, 2011, Improving the adsorption of heavy metals from water using commercial carbons modified with egg shell wastes, Ind. Eng. Chem. Res., 50, 9354, 10.1021/ie2006627 · DOI
- Monser, 2009, Tartrazine modified activated carbon for the removal of Pb(II), Cd(II) and Cr(III), J. Hazard. Mater., 161, 263, 10.1016/j.jhazmat.2008.03.120 · doi:10.1016/j.jhazmat.2008.03.120
- Liu, 2010, Arsenate removal from water using Fe3O4-loaded activated carbon prepared from waste biomass, Chem. Eng. J., 160, 57, 10.1016/j.cej.2010.03.003 · DOI · Paper page
- Taghipour, 2018, Mild synthesis of a Zn (II) metal organic polymer and its hybrid with activated carbon: application as antibacterial agent and in water treatment by using sonochemistry: optimization, kinetic and isotherm study, Ultrason. Sonochem., 41, 389, 10.1016/j.ultsonch.2017.09.056 · DOI
- Zargoosh, 2013, Effective removal of heavy metal ions from industrial wastes using thiosalicylhydrazide-modified magnetic nanoparticles, Ind. Eng. Chem. Res., 52, 14944, 10.1021/ie401971w · DOI
- Li, 2018, Zeolite-supported nanoscale zero-valent iron: new findings on simultaneous adsorption of Cd (II), Pb (II), and As (III) in aqueous solution and soil, J. Hazard. Mater., 344, 1, 10.1016/j.jhazmat.2017.09.036 · DOI · Paper page
- Vieira, 2018, Comparing chemometric and Langmuir isotherm for determination of maximum capacity adsorption of arsenic by a biosorbent, Microchem. J., 137, 324, 10.1016/j.microc.2017.11.005 · DOI
- Sun, 2015, Functionalized chrysotile nanotubes with mercapto groups and their Pb(II) and Cd(II) adsorption properties in aqueous solution, J. Mol. Liq., 208, 347, 10.1016/j.molliq.2015.04.060 · doi:10.1016/j.molliq.2015.04.060
- Wet-Osot, 2016, Ultrasound-assisted solvent-free parallel synthesis of 3-arylcoumarins using N-acylbenzotriazoles, ACS Comb. Sci., 18, 279, 10.1021/acscombsci.6b00055 · doi:10.1021/acscombsci.6b00055
- Georgescu, 2018, Applied clay science adsorption of lead (II) ions from aqueous solutions onto Cr-pillared clays, Appl. Clay Sci., 152, 44, 10.1016/j.clay.2017.10.031 · DOI
- He, 2017, Rapid adsorption of Pb, Cu and Cd from aqueous solutions by β-cyclodextrin polymers, Appl. Surf. Sci., 426, 29, 10.1016/j.apsusc.2017.07.103 · DOI · Paper page
- Zhao, 2011, Few-layered graphene oxide nanosheets as superior sorbents for heavy metal ion pollution management, Environ. Sci. Technol., 45, 10454, 10.1021/es203439v · DOI · Paper page
- Huang, 2017, Construction of layered double hydroxides/hollow carbon microsphere composites and its applications for mutual removal of Pb(II) and humic acid from aqueous solutions, ACS Sustain. Chem. Eng., 5, 11268, 10.1021/acssuschemeng.7b01717 · DOI
- Zhu, 2018, Magnetic porous polymers prepared via high internal phase emulsions for efficient removal of Pb2+ and Cd2+, ACS Sustain. Chem. Eng., 6, 5206, 10.1021/acssuschemeng.7b04868 · DOI
- Yang, 2017, Rational design and synthesis of monodispersed hierarchical SiO2@layered double hydroxide nanocomposites for efficient removal of pollutants from aqueous solution, Chem. Eur. J., 323, 143
- Yi, 2017, Synthesis of molybdenum disulfide/reduced graphene oxide composites for effective removal of Pb(II) from aqueous solutions, Sci. Bull., 62, 913, 10.1016/j.scib.2017.05.025 · DOI
- Gu, 2019, Two-dimensional MAX-derived titanate nanostructures for efficient removal of Pb(II), Dalton Trans., 48, 2100, 10.1039/C8DT04301A · DOI
- Darezereshki, 2018, Influence of heavy metals on the adsorption of arsenate by magnetite nanoparticles: kinetics and thermodynamic, Environ. Nanotechnol. Monit. Manag., 10, 51
- Zhu, 2019, Efficient removal of Pb2+ by Tb-MOFs: identifying the adsorption mechanism through experimental and theoretical investigations, Environ. Sci.: Nano., 6, 261
Cited by
Heavy Metal Water Pollution: A Fresh Look about Hazards, Novel and Conventional Remediation Methods
Zamora-Ledezma, C., Negrete-Bolagay, D., Figueroa, F., Zamora-Ledezma, E., Ni, M., Alexis, F., & Guerrero, V. H. (2021) · Environmental Technology & Innovation · doi:10.1016/j.eti.2021.101504 · Cited by 1,246
Recent advances in activated carbon modification techniques for enhanced heavy metal adsorption
Mariana, M., H.P.S., A. K., Mistar, E. M., Yahya, E. B., Alfatah, T., Danish, M., & Amayreh, M. (2021) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2021.102221 · Cited by 410
Tee, G. T., Gok, X. Y., & Yong, W. F. (2022) · Environmental Research · doi:10.1016/j.envres.2022.113248 · Cited by 346
Mane, P. V., Rego, R. M., Yap, P. L., Losic, D., & Kurkuri, M. D. (2024) · Progress in Materials Science · doi:10.1016/j.pmatsci.2024.101314 · Cited by 271
Çelebi, H., Gök, G., & Gök, O. (2020) · Scientific Reports · doi:10.1038/s41598-020-74553-4 · Cited by 245
Surface-modified magnetic biochar: Highly efficient adsorbents for removal of Pb (ΙΙ) and Cd (ΙΙ)
Zahedifar, M., Seyedi, N., Shafiei, S., & Basij, M. (2021) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2021.124860 · Cited by 97
Metadata
- Authors
- Nejadshafiee, V., & Islami, M. R.
- Venue
- Materials Science and Engineering: C
- Publisher
- Elsevier BV
- Published
- 2019-08
- Volume
- 101
- Pages
- 42-52
- ISSN
- 0928-4931 (ISSN-L)
- OpenAlex
- W2929069063
- Cited by
- 194
- References
- 1
- FWCI
- 8.72
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- Funders
- Iran National Science Foundation (95010061)
- Department of Chemistry, Shahid Bahonar University
- Central Lab, Shahid Bahonar University
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.