Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Cited by 194

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Adsorption capacity of heavy metal ions using sultone-modified magnetic activated carbon as a bio-adsorbent

Nejadshafiee, Vajihe, Islami, Mohammad Reza · 2019 · Materials Science and Engineering: C

Abstract

A novel magnetic bio-adsorbent has been prepared by the loading of Fe3O4 NPs and immobilization of 1,4-butane sultone on the surface of activated carbon. The activated carbon was synthesized from pistachio shell as a carbon material of biogenic, bio-resources and its use is cost effective. Structure, morphology and magnetic property of the prepared adsorbent were studied by transmission electron microscopy (TEM), vibrating sample magnetometer (VSM), Fourier transform infrared spectroscopy (FT-IR), and thermal gravimetric analysis (TGA). The capacity of the adsorbent for removing heavy metals ions Pb(II), As(III) and Cd(II) was studied using Langmuir adsorption isotherm under ultrasound-assisted condition. The maximum adsorption capacities of Pb(II), As(III) and Cd(II) were found to be 147.05, 151.51 and 119.04 mg g-1, respectively. In addition to high adsorption capacity, this adsorbent shows advantages such as green synthesis, low cast, recyclability, and easy separation. So this nanocomposite can be a suitable absorbent for removal of heavy metal ions from aqueous solutions. Meanwhile, the use of ultrasound radiation is an effective and rapid uptake technology for separating of heavy metal ions from aqueous solutions.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.msec.2019.03.081

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Research works printed but not linked: 51

  1. Haroun, 2011, Preparation and evaluation of novel interpenetrating polymer network-based on newspaper pulp for removal of copper ions, Polym.-Plast. Technol., 50, 232, 10.1080/03602559.2010.531435 · DOI
  2. Haroun, 2013, Novel nanocomposites based on gelatin/HPET/chitosan with high performance acid red 150 dye adsorption, Clean Techn. Environ. Policy, 15, 367, 10.1007/s10098-012-0525-y · doi:10.1007/s10098-012-0525-y
  3. Kardam, 2014, Nanocellulose fibers for biosorption of cadmium, nickel, and lead ions from aqueous solution, Policy Clean Technol. Environ., 16, 385, 10.1007/s10098-013-0634-2 · DOI · Paper page
  4. Huang, 2017, Surface functionalized SiO2 nanoparticles with cationic polymers via the combination of mussel inspired chemistry and surface initiated atom transfer radical polymerization: characterization and enhanced removal of organic dye, J. Colloid Interface Sci., 499, 170, 10.1016/j.jcis.2017.03.102 · DOI · Paper page
  5. Huang, 2017, Facile preparation of MoS2 based polymer composites via mussel inspired chemistry and their high efficiency for removal of organic dyes, Appl. Surf. Sci., 419, 35, 10.1016/j.apsusc.2017.05.006 · DOI · Paper page
  6. Zhang, 2015, Preparation of amine functionalized carbon nanotubes via a bioinspired strategy and their application in Cu2+ removal, Appl. Surf. Sci., 343, 19, 10.1016/j.apsusc.2015.03.081 · DOI · Paper page
  7. Gupta, 2004, Removal of lead and chromium from wastewater using bagasse fly ash-a sugar industry waste, J. Colloid Interface Sci., 27, 21
  8. Hebeish, 2011, An effective adsorbent based on sawdust for removal of direct dye from aqueous solutions, Clean Techn. Environ. Policy, 13, 713, 10.1007/s10098-010-0343-z · doi:10.1007/s10098-010-0343-z
  9. Chouchene, 2014, Biosorption performance, combustion behavior, and leaching characteristics of olive solid waste during the removal of copper and nickel from aqueous solutions, Clean Techn. Environ. Policy, 16, 979, 10.1007/s10098-013-0680-9 · DOI
  10. Wang, 2017, Single and binary adsorption of heavy metal ions from aqueous solutions using sugarcane cellulose-based adsorbent, Bioresour. Technol., 241, 482, 10.1016/j.biortech.2017.05.162 · DOI · Paper page
  11. Li, 2018, Novel composite adsorbent consisting of dissolved cellulose fiber/microfibrillated cellulose for dye removal from aqueous solution, ACS Sustain. Chem. Eng., 6, 6994, 10.1021/acssuschemeng.8b00829 · DOI
  12. Wang, 2017, Microstructures and speciation of radionuclides in natural environment studied by advanced spectroscopy and theoretical calculation, Sci. China Chem., 60, 1149, 10.1007/s11426-017-9039-2 · doi:10.1007/s11426-017-9039-2
  13. Xie, 2019, Emerging natural and tailored materials for uranium-contaminated water treatment and environmental remediation, Mater. Sci., 103, 180
  14. Wu, 2019, Environmental remediation of heavy metal ions by novel-nanomaterials: a review, Environ. Pollut., 246, 608, 10.1016/j.envpol.2018.12.076 · DOI · Paper page
  15. Zhang, 2015, Synthesis of magnetite-graphene oxide-layered double hydroxide composites and applications for the removal of Pb(II) and 2,4-dichlorophenoxyacetic acid from aqueous solutions, ACS Appl. Mater. Interfaces, 16, 7251, 10.1021/acsami.5b00433 · DOI
  16. Tan, 2015, Adsorption of Cu(II), Cd(II) and Ni(II) from aqueous single metal solutions on graphene oxide membranes, J. Hazard. Mater., 297, 251−260, 10.1016/j.jhazmat.2015.04.068 · DOI · Paper page
  17. Wang, 2016, Application of graphene oxides and graphene oxide-based nanomaterials in radionuclide removal from aqueous solutions, Sci. Bull., 61, 1583, 10.1007/s11434-016-1168-x · DOI
  18. Kamandari, 2014, Experimental and modeling study on production of activated carbon from pistachio shells in rotary reactor, Res. Chem. Intermed., 40, 509, 10.1007/s11164-012-0978-y · DOI
  19. Paraskeva, 2008, Diamadopoulos, production of activated carbon from agricultural by-products, J. Chem. Technol. Biotechnol., 83, 581, 10.1002/jctb.1847 · DOI
  20. Dolores, 2013, Porous biomass- derived carbons: activated carbons, vol. 1, 100
  21. Tamez, 2016, Removal of Cu (II) and Pb (II) from aqueous solution using engineered iron oxide nanoparticles, Microchem. J., 125, 97, 10.1016/j.microc.2015.10.028 · DOI
  22. Sharifpour, 2018, Isotherms and kinetic study of ultrasound-assisted adsorption of malachite green and Pb2+ ions from aqueous samples by copper sulfide nanorods loaded on activated carbon: experimental design optimization, Ultrason. Sonochem., 40, 373, 10.1016/j.ultsonch.2017.07.030 · DOI · Paper page
  23. Sharma, 2010, Engineering data for optimization of preparation of activated carbon from an economically viable material, J. Chem. Eng. Data, 55, 3991, 10.1021/je100041x · DOI
  24. Yang, 2006, Textural and chemical properties of zinc chloride activated carbons prepared from pistachio-nut shells, Mater. Chem. Phys., 100, 438, 10.1016/j.matchemphys.2006.01.039 · DOI · Paper page
  25. Tavakoli Foroushani, 2016, An investigation on the effect of KMnO4 on the pore characteristics of pistachio nut shell based activated carbon, Microporous Mesoporous Mater., 230, 39, 10.1016/j.micromeso.2016.04.030 · DOI
  26. Lua, 2004, Effects of vacuum pyrolysis conditions on the characteristics of activated carbons derived from pistachio-nut shells, J. Colloid Interface Sci., 276, 364, 10.1016/j.jcis.2004.03.071 · DOI
  27. Zhang, 2017, Mussel-inspired fabrication of functional materials and their environmental applications: progress and prospects, Appl. Mater. Today, 7, 222, 10.1016/j.apmt.2017.04.001 · DOI · Paper page
  28. Venkateswarlu, 2016, Bioinspired 2D-carbon flakes and Fe3O4 nanoparticles composite for arsenite removal, ACS Appl. Mater. Interfaces, 8, 23876, 10.1021/acsami.6b03583 · DOI · Paper page
  29. Hua, 2018, Adsorption of low-concentration arsenic from water by co-modified bentonite with manganese oxides and poly (dimethyldiallylammonium chloride), J. Enviro. Chem. Eng., 6, 156, 10.1016/j.jece.2017.11.062 · DOI
  30. Liu, 2010, Arsenate removal from water using Fe3O4-loaded activated carbon prepared from waste biomass, Chem. Eng. J., 160, 57, 10.1016/j.cej.2010.03.003 · DOI · Paper page
  31. Guedidi, 2013, The effects of the surface oxidation of activated carbon, the solution pH and the temperature on adsorption of ibuprofen, Carbon, 54, 432, 10.1016/j.carbon.2012.11.059 · DOI · Paper page
  32. Yao, 2016, Adsorption of Eu(III) on sulfonated graphene oxide: combined macroscopic and modeling techniques, J. Mol. Liq., 215, 443, 10.1016/j.molliq.2015.11.030 · doi:10.1016/j.molliq.2015.11.030
  33. Guijarro-Aldaco, 2011, Improving the adsorption of heavy metals from water using commercial carbons modified with egg shell wastes, Ind. Eng. Chem. Res., 50, 9354, 10.1021/ie2006627 · DOI
  34. Monser, 2009, Tartrazine modified activated carbon for the removal of Pb(II), Cd(II) and Cr(III), J. Hazard. Mater., 161, 263, 10.1016/j.jhazmat.2008.03.120 · doi:10.1016/j.jhazmat.2008.03.120
  35. Liu, 2010, Arsenate removal from water using Fe3O4-loaded activated carbon prepared from waste biomass, Chem. Eng. J., 160, 57, 10.1016/j.cej.2010.03.003 · DOI · Paper page
  36. Taghipour, 2018, Mild synthesis of a Zn (II) metal organic polymer and its hybrid with activated carbon: application as antibacterial agent and in water treatment by using sonochemistry: optimization, kinetic and isotherm study, Ultrason. Sonochem., 41, 389, 10.1016/j.ultsonch.2017.09.056 · DOI
  37. Zargoosh, 2013, Effective removal of heavy metal ions from industrial wastes using thiosalicylhydrazide-modified magnetic nanoparticles, Ind. Eng. Chem. Res., 52, 14944, 10.1021/ie401971w · DOI
  38. Li, 2018, Zeolite-supported nanoscale zero-valent iron: new findings on simultaneous adsorption of Cd (II), Pb (II), and As (III) in aqueous solution and soil, J. Hazard. Mater., 344, 1, 10.1016/j.jhazmat.2017.09.036 · DOI · Paper page
  39. Vieira, 2018, Comparing chemometric and Langmuir isotherm for determination of maximum capacity adsorption of arsenic by a biosorbent, Microchem. J., 137, 324, 10.1016/j.microc.2017.11.005 · DOI
  40. Sun, 2015, Functionalized chrysotile nanotubes with mercapto groups and their Pb(II) and Cd(II) adsorption properties in aqueous solution, J. Mol. Liq., 208, 347, 10.1016/j.molliq.2015.04.060 · doi:10.1016/j.molliq.2015.04.060
  41. Wet-Osot, 2016, Ultrasound-assisted solvent-free parallel synthesis of 3-arylcoumarins using N-acylbenzotriazoles, ACS Comb. Sci., 18, 279, 10.1021/acscombsci.6b00055 · doi:10.1021/acscombsci.6b00055
  42. Georgescu, 2018, Applied clay science adsorption of lead (II) ions from aqueous solutions onto Cr-pillared clays, Appl. Clay Sci., 152, 44, 10.1016/j.clay.2017.10.031 · DOI
  43. He, 2017, Rapid adsorption of Pb, Cu and Cd from aqueous solutions by β-cyclodextrin polymers, Appl. Surf. Sci., 426, 29, 10.1016/j.apsusc.2017.07.103 · DOI · Paper page
  44. Zhao, 2011, Few-layered graphene oxide nanosheets as superior sorbents for heavy metal ion pollution management, Environ. Sci. Technol., 45, 10454, 10.1021/es203439v · DOI · Paper page
  45. Huang, 2017, Construction of layered double hydroxides/hollow carbon microsphere composites and its applications for mutual removal of Pb(II) and humic acid from aqueous solutions, ACS Sustain. Chem. Eng., 5, 11268, 10.1021/acssuschemeng.7b01717 · DOI
  46. Zhu, 2018, Magnetic porous polymers prepared via high internal phase emulsions for efficient removal of Pb2+ and Cd2+, ACS Sustain. Chem. Eng., 6, 5206, 10.1021/acssuschemeng.7b04868 · DOI
  47. Yang, 2017, Rational design and synthesis of monodispersed hierarchical SiO2@layered double hydroxide nanocomposites for efficient removal of pollutants from aqueous solution, Chem. Eur. J., 323, 143
  48. Yi, 2017, Synthesis of molybdenum disulfide/reduced graphene oxide composites for effective removal of Pb(II) from aqueous solutions, Sci. Bull., 62, 913, 10.1016/j.scib.2017.05.025 · DOI
  49. Gu, 2019, Two-dimensional MAX-derived titanate nanostructures for efficient removal of Pb(II), Dalton Trans., 48, 2100, 10.1039/C8DT04301A · DOI
  50. Darezereshki, 2018, Influence of heavy metals on the adsorption of arsenate by magnetite nanoparticles: kinetics and thermodynamic, Environ. Nanotechnol. Monit. Manag., 10, 51
  51. Zhu, 2019, Efficient removal of Pb2+ by Tb-MOFs: identifying the adsorption mechanism through experimental and theoretical investigations, Environ. Sci.: Nano., 6, 261

Cited by

See all 194

Metadata

Authors
Nejadshafiee, V., & Islami, M. R.
Venue
Materials Science and Engineering: C
Publisher
Elsevier BV
Published
2019-08
Volume
101
Pages
42-52
ISSN
0928-4931 (ISSN-L)
OpenAlex
W2929069063
Cited by
194
References
1
FWCI
8.72
Type
journal article
Language
en
Open access
closed
Licence
  • www.elsevier.com/tdm/userlicense/1.0/ (tdm)
  • www.elsevier.com/legal/tdmrep-license (tdm)
Funders
  • Iran National Science Foundation (95010061)
  • Department of Chemistry, Shahid Bahonar University
  • Central Lab, Shahid Bahonar University

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.