The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Preparation and characterization of PLA/PCL/HA composite scaffolds using indirect 3D printing for bone tissue engineering
Abstract
3D printing-based technologies can fabricate scaffolds offer great precision to control internal architecture and print complicated structures based upon the defect site. However, the materials used in the direct printing are restricted depending on the printing technology used and the indirect one can overcome this limitation. In the present study, indirect 3D printing approach was used to develop bone scaffolds from polylactic acid/ polycaprolactone/ hydroxyapatite (PLA/PCL/HA) composites. Casting of the composite suspensions was done into a dissolvable 3D printed negative mold, in order to achieve simultaneous macro- and micro-porous composites, using freeze drying/particle leaching method. To evaluate morphology, functional groups, and elemental analysis of the scaffolds, scanning electron microscopy (SEM), Fourier transform infrared (FTIR), and energy dispersive spectroscopy (EDS) were respectively used. Scaffolds' porosity was measured with the aid of liquid replacement technique. Also, the mechanical strength of scaffolds was examined by compression test and measuring the compressive modulus Considering the microstructure, porosity and pore size as well as mechanical property, the scaffold composed of PLA/PCL 70/30 w/w and 35% HA was more favorable. The PLA/PCL/HA 70/30-35% scaffold presented a porosity of 77%, an average pore size of 160 μm, and Young's modulus of 1.35 MPa. Cell adhesion, viability and mineral deposits formation for PLA/PCL/HA scaffolds at PLA/PCL ratios of 70/30, 50/50 and 30/70 and the fixed amount of HA (35%) were also studied in vitro by the means of MG63 cells. The cytotoxicity assessment showed that the cells could be viable and proliferate on the scaffolds. The results indicated that composite scaffold with the PLA/PCL weight ratio of70/30 accomplished more favorable properties in terms of biocompatibility, viability, and osteoinduction property.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Oryan, A., Eslaminejad, M. B., Kamali, A., Hosseini, S., Moshiri, A., & Baharvand, H. (2018) · Cell and Tissue Research · doi:10.1007/s00441-018-2837-7 · Cited by 33
Self-citationRetractedPorous scaffold design for tissue engineering
Hollister, S. J. (2005) · Nature Materials · doi:10.1038/nmat1421 · Cited by 3,969
Synthetic biodegradable polymers as orthopedic devices
Middleton, J. C., & Tipton, A. J. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00101-0 · Cited by 2,741
The design of scaffolds for use in tissue engineering. Part I. Traditional factors
Yang, S., Leong, K.-F., Du, Z., & Chua, C.-K. (2001) · Tissue Engineering · doi:10.1089/107632701753337645 · Cited by 2,234
The application of polyhydroxyalkanoates as tissue engineering materials
Chen, G.-Q., & Wu, Q. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.04.036 · Cited by 1,418
Biomimetic materials for tissue engineering
Ma, P. X. (2008) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.08.041 · Cited by 1,310
Biomaterials for bone tissue engineering
Stevens, M. M. (2008) · Materials Today · doi:10.1016/s1369-7021(08)70086-5 · Cited by 1,202
3D Printing of Scaffolds for Tissue Regeneration Applications
Do, A., Khorsand, B., Geary, S. M., & Salem, A. K. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500168 · Cited by 949
Polymeric biomaterials for tissue and organ regeneration
Seal, B. (2001) · Materials Science and Engineering: R: Reports · doi:10.1016/s0927-796x(01)00035-3 · Cited by 892
Mondal, D., Griffith, M., & Venkatraman, S. S. (2016) · International Journal of Polymeric Materials and Polymeric Biomaterials · doi:10.1080/00914037.2015.1103241 · Cited by 515
Qian, L., & Zhang, H. (2011) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.2495 · Cited by 509
Kim, S. S., Utsunomiya, H., Koski, J. A., Wu, B. M., Cima, M. J., Sohn, J., Mukai, K., Griffith, L. G., & Vacanti, J. P. (1998) · Annals of Surgery · doi:10.1097/00000658-199807000-00002 · Cited by 451
Designing of PLA scaffolds for bone tissue replacement fabricated by ordinary commercial 3D printer
Gregor, A., Filová, E., Novák, M., Kronek, J., Chlup, H., Buzgo, M., Blahnová, V., Lukášová, V., Bartoš, M., Nečas, A., et al. (2017) · Journal of Biological Engineering · doi:10.1186/s13036-017-0074-3 · Cited by 406
Engineering functionally graded tissue engineering scaffolds
Leong, K. F., Chua, C. K., Sudarmadji, N., & Yeong, W. Y. (2008) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2007.11.002 · Cited by 346
Chatterjee, K., Lin-Gibson, S., Wallace, W. E., Parekh, S. H., Lee, Y. J., Cicerone, M. T., Young, M. F., & Simon, C. G. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.03.024 · Cited by 309
Light-assisted direct-write of 3D functional biomaterials
Hribar, K. C., Soman, P., Warner, J., Chung, P., & Chen, S. (2014) · Lab Chip · doi:10.1039/c3lc50634g · Cited by 231
Fang, J., Li, P., Lu, X., Fang, L., Lü, X., & Ren, F. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.02.019 · Cited by 206
Mofokeng, J. P., & Luyt, A. S. (2015) · Polymer Testing · doi:10.1016/j.polymertesting.2015.05.007 · Cited by 186
Ostafinska, A., Fortelny, I., Nevoralova, M., Hodan, J., Kredatusova, J., & Slouf, M. (2015) · RSC Advances · doi:10.1039/c5ra21178f · Cited by 176
Roohani-Esfahani, S. I., Nouri-Khorasani, S., Lu, Z. F., Appleyard, R. C., & Zreiqat, H. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.10.015 · Cited by 162
Eshraghi, S., & Das, S. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.04.022 · Cited by 153
Park, S. H., Park, D. S., Shin, J. W., Kang, Y. G., Kim, H. K., Yoon, T. R., & Shin, J. (2012) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-012-4738-8 · Cited by 138
Diba, M., Kharaziha, M., Fathi, M., Gholipourmalekabadi, M., & Samadikuchaksaraei, A. (2012) · Composites Science and Technology · doi:10.1016/j.compscitech.2012.01.023 · Cited by 126
Shahrezaee, M., Salehi, M., Keshtkari, S., Oryan, A., Kamali, A., & Shekarchi, B. (2018) · Nanomedicine Nanotechnology Biology and Medicine · doi:10.1016/j.nano.2018.06.007 · Cited by 124
Self-citationFormation of porous HPCL/LPCL/HA scaffolds with supercritical CO2 gas foaming method
Moghadam, M., Hassanajili, S., Esmaeilzadeh, F., Ayatollahi, M., & Ahmadi, M. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2016.12.014 · Cited by 91
Self-citationXu, T., Yao, Q., Miszuk, J. M., Sanyour, H. J., Hong, Z., Sun, H., & Fong, H. (2018) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2018.07.004 · Cited by 91
Chen, C., Liu, J., Chua, C.-K., Chou, S. M., Shyu, V. B., & Chen, J. (2014) · Materials · doi:10.3390/ma7032104 · Cited by 75
Frydrych, M., & Chen, B. (2013) · Journal of Materials Chemistry B · doi:10.1039/c3tb20842g · Cited by 64
Mou, Z., Zhao, L.-J., Zhang, Q.-A., Zhang, J., & Zhang, Z. (2011) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2011.07.003 · Cited by 63
Stem cells, tissue engineering and organogenesis in transplantation
Cortesini, R. (2005) · Transplant Immunology · doi:10.1016/j.trim.2005.09.013 · Cited by 61
Zhang, J., Xu, J., Wang, H., Jin, W., & Li, J. (2009) · Materials Science and Engineering: C · doi:10.1016/j.msec.2008.08.002 · Cited by 60
Effects of hydroxyapatite filler on long-term hydrolytic degradation of PLLA/PCL porous scaffolds
Ródenas‐Rochina, J., Vidaurre, A., Cortázar, I. C., & Lebourg, M. (2015) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2015.04.015 · Cited by 60
Zhao, H., & Zhao, G. (2015) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2015.08.002 · Cited by 40
Kaynak, C., & Kaygusuz, I. (2015) · Journal of Composite Materials · doi:10.1177/0021998315575038 · Cited by 29
Embroidered and surface coated polycaprolactone-co-lactide scaffolds
Rentsch, B., Bernhardt, R., Scharnweber, D., Schneiders, W., Rammelt, S., & Rentsch, C. (2012) · Biomatter · doi:10.4161/biom.21931 · Cited by 29
Cruz, F. (2010) · Biopolymers · doi:10.5772/10264 · Cited by 28
Cited by
Scaffold Fabrication Technologies and Structure/Function Properties in Bone Tissue Engineering
Collins, M. N., Ren, G., Young, K., Pina, S., Reis, R. L., & Oliveira, J. M. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010609 · Cited by 867
Shuai, C., Yang, W., Feng, P., Peng, S., & Pan, H. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.09.001 · Cited by 424
A review on PLA-based biodegradable materials for biomedical applications
Hussain, M., Khan, S. M., Shafiq, M., & Abbas, N. (2024) · Giant · doi:10.1016/j.giant.2024.100261 · Cited by 326
Ceramic Materials for Biomedical Applications: An Overview on Properties and Fabrication Processes
Vaiani, L., Boccaccio, A., Uva, A. E., Palumbo, G., Piccininni, A., Guglielmi, P., Cantore, S., Santacroce, L., Charitos, I. A., & Ballini, A. (2023) · Journal of Functional Biomaterials · doi:10.3390/jfb14030146 · Cited by 271
3D printing PCL/nHA bone scaffolds: exploring the influence of material synthesis techniques
Zimmerling, A., Yazdanpanah, Z., Cooper, D. M. L., Johnston, J. D., & Chen, X. (2021) · Biomaterials Research · doi:10.1186/s40824-021-00204-y · Cited by 151
Metadata
- Authors
- Hassanajili, S., Karami-Pour, A., Oryan, A., & Talaei-Khozani, T.
- Venue
- Materials Science and Engineering: C
- Publisher
- Elsevier BV
- Published
- 2019-11
- Volume
- 104
- Pages
- 109960
- ISSN
- 0928-4931 (ISSN-L)
- OpenAlex
- W2953851434
- Cited by
- 346
- References
- 36
- FWCI
- 11.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.