Fuel cell catalyst degradation: Identical location electron microscopy and related methods
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Abstract Fuel cells are an important piece in our quest for a sustainable energy supply. Although there are several different types of fuel cells, the by far most popular is the proton exchange membrane fuel cell (PEMFC). Among its many favorable properties are a short start up time and a high power density; both essential for automotive applications. Its drawback is the use of carbon supported Pt or Pt alloys as the active catalyst. The scarce resources of Pt led to significant efforts in reducing the amount of Pt used in PEMFCs. Thanks to the advancements of these efforts, catalyst stability gained increasing focus. Activity of the catalyst is important, but stability is essential. In the presented perspective paper, we review recent efforts to investigate fuel cell catalysts ex-situ in electrochemical half-cell measurements. Due to the amount of different studies, this review has no intention to give a complete overview and cover all studies. Instead we concentrate on efforts of our and other research groups to apply identical location electron microscopy and related methods to study the degradation of PEMFC catalysts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Highly Crystalline Multimetallic Nanoframes with Three-Dimensional Electrocatalytic Surfaces
Chen, C., Kang, Y., Huo, Z., Zhu, Z., Huang, W., Xin, H. L., Snyder, J. D., Li, D., Herron, J. A., Mavrikakis, M., et al. (2014) · Science · doi:10.1126/science.1249061 · Cited by 2,765
Speder, J., Zana, A., Spanos, I., Kirkensgaard, J. J. K., Mortensen, K., Hanzlik, M., & Arenz, M. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.03.039 · Cited by 204
Self-citation
Cited by
Ren, P., Pei, P., Li, Y., Wu, Z., Chen, D., & Huang, S. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100859 · Cited by 737
Du, L., Prabhakaran, V., Xie, X., Park, S., Wang, Y., & Shao, Y. (2021) · Advanced Materials · doi:10.1002/adma.201908232 · Cited by 357
Nafion degradation mechanisms in proton exchange membrane fuel cell (PEMFC) system: A review
Okonkwo, P. C., Ben Belgacem, I., Emori, W., & Uzoma, P. C. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2021.06.032 · Cited by 330
Highly Durable and Active Pt‐Based Nanoscale Design for Fuel‐Cell Oxygen‐Reduction Electrocatalysts
Chung, D. Y., Yoo, J. M., & Sung, Y. (2018) · Advanced Materials · doi:10.1002/adma.201704123 · Cited by 297
Operando Methods in Electrocatalysis
Yang, Y., Xiong, Y., Zeng, R., Lu, X., Krumov, M., Huang, X., Xu, W., Wang, H., DiSalvo, F. J., Brock, J. D., et al. (2021) · ACS Catalysis · doi:10.1021/acscatal.0c04789 · Cited by 274
Metadata
- Authors
- Arenz, M., & Zana, A.
- Venue
- Nano Energy
- Publisher
- Elsevier BV
- Published
- 2016-11
- Volume
- 29
- Pages
- 299-313
- ISSN
- 2211-2855 (ISSN-L)
- OpenAlex
- W2336494488
- Cited by
- 83
- References
- 2
- FWCI
- 3.96
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.