The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Humidity resistant fabrication of CH3NH3PbI3 perovskite solar cells and modules
Open accessAbstract
A humidity resistant and versatile fabrication method for the production of very high quality, organic-inorganic perovskite films, solar cells and solar modules is presented. By using ethyl acetate as an anti-solvent during deposition, perovskite solar cells with power conversion efficiencies (PCEs) up to 15% were fabricated in a 75% relative humidity (RH) environment. Ethyl acetate acts as a moisture absorber during spin-coating, protecting sensitive perovskite intermediate phases from airborne water during film formation and annealing. We have demonstrated the manufacture of 50 mm × 50 mm series interconnected modules with PCEs in excess of 10% for 13.5 cm2 devices processed in air at 75%RH and 11.8% at 50%RH. To the best of our knowledge, these results represent the highest efficiency for perovskite solar modules processed under high humidity ambient conditions. This new deposition protocol allows for low-cost, efficient and consistent device fabrication in humid climates and uncontrolled laboratories.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Retraction Note: Carbon enters silica forming a cristobalite-type CO2–SiO2 solid solution
Santoro, M., Gorelli, F. A., Bini, R., Salamat, A., Leonel, G. G., Levelut, C., Cambon, O., & Haines, J. P. (2016) · Nature Communications · doi:10.1038/ncomms13417 · Cited by 143
RetractedOrganometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092 · cited 1×
“Since the seminal work by Miyasaka in 2009 [1], followed by the move to fully solid-state devices in 2012 by the groups of Snaith [2] and Gratzel [3], metal halide perovskite solar cells (PSCs) have taken the photovoltaic (PV) research community by storm [4].”
BackgroundEfficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723 · cited 3×
“Other popular anti-solvents were also compared including diethyl ether [26], toluene [27] and chlorobenzene [28–30] and were found to produce increasingly poor quality films as processing humidity is increased.”
BackgroundMethodInterface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Saliba, M., Matsui, T., Seo, J.-Y., Domanski, K., Correa-Baena, J.-P., Nazeeruddin, M. K., Zakeeruddin, S. M., Tress, W., Abate, A., Hagfeldt, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03874j · Cited by 5,440
Noh, J. H., Im, S. H., Heo, J. H., Mandal, T. N., & Seok, S. I. (2013) · Nano Letters · doi:10.1021/nl400349b · Cited by 4,829
Eperon, G. E., Stranks, S. D., Menelaou, C., Johnston, M. B., Herz, L. M., & Snaith, H. J. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43822h · Cited by 4,140
Baikie, T., Fang, Y., Kadro, J. M., Schreyer, M., Wei, F., Mhaisalkar, S. G., Graetzel, M., & White, T. J. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta10518k · Cited by 2,534
Planar Heterojunction Perovskite Solar Cells via Vapor-Assisted Solution Process
Chen, Q., Zhou, H., Hong, Z., Luo, S., Duan, H.-S., Wang, H.-H., Liu, Y., Li, G., & Yang, Y. (2014) · Journal of the American Chemical Society · doi:10.1021/ja411509g · Cited by 2,306
The light and shade of perovskite solar cells
Grätzel, M. (2014) · Nature Materials · doi:10.1038/nmat4065 · Cited by 2,258
Xiao, M., Huang, F., Huang, W., Dkhissi, Y., Zhu, Y., Etheridge, J., Gray‐Weale, A., Bach, U., Cheng, Y., & Spiccia, L. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201405334 · Cited by 1,630
Perovskite solar cells employing organic charge-transport layers
Malinkiewicz, O., Yella, A., Lee, Y. H., Espallargas, G. M., Graetzel, M., Nazeeruddin, M. K., & Bolink, H. J. (2014) · Nature Photonics · doi:10.1038/nphoton.2013.341 · Cited by 1,474
Yang, J., Siempelkamp, B. D., Liu, D., & Kelly, T. L. (2015) · ACS Nano · doi:10.1021/nn506864k · Cited by 1,351
Variants in ELL2 influencing immunoglobulin levels associate with multiple myeloma
Swaminathan, B., Thorleifsson, G., Jöud, M., Ali, M., Johnsson, E., Ajore, R., Sulem, P., Halvarsson, B.-M., Eyjolfsson, G., Haraldsdottir, V., et al. (2015) · Nature Communications · doi:10.1038/ncomms8213 · Cited by 1,132
Niu, G., Li, W., Meng, F., Wang, L., Dong, H., & Qiu, Y. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta13606j · Cited by 1,075
Lewis Acid–Base Adduct Approach for High Efficiency Perovskite Solar Cells
Lee, J.-W., Kim, H.-S., & Park, N.-G. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00440 · Cited by 1,067
Giordano, F., Abate, A., Correa Baena, J. P., Saliba, M., Matsui, T., Im, S. H., Zakeeruddin, S. M., Nazeeruddin, M. K., Hagfeldt, A., & Graetzel, M. (2016) · Nature Communications · doi:10.1038/ncomms10379 · Cited by 869
Efficient and stable perovskite solar cells prepared in ambient air irrespective of the humidity
Tai, Q., You, P., Sang, H., Liu, Z., Hu, C., Chan, H. L. W., & Yan, F. (2016) · Nature Communications · doi:10.1038/ncomms11105 · Cited by 590
The Importance of Moisture in Hybrid Lead Halide Perovskite Thin Film Fabrication
Eperon, G. E., Habisreutinger, S. N., Leijtens, T., Bruijnaers, B. J., van Franeker, J. J., deQuilettes, D. W., Pathak, S., Sutton, R. J., Grancini, G., Ginger, D. S., et al. (2015) · ACS Nano · doi:10.1021/acsnano.5b03626 · Cited by 574
Sample Preparation Techniques in Analytical Chemistry
(2003) · Wiley eBooks · doi:10.1002/0471457817 · Cited by 481
Control of I–V Hysteresis in CH3NH3PbI3 Perovskite Solar Cell
Kim, H.-S., Jang, I.-H., Ahn, N., Choi, M., Guerrero, A., Bisquert, J., & Park, N.-G. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b02273 · Cited by 478
Song, Z., Abate, A., Watthage, S. C., Liyanage, G. K., Phillips, A. B., Steiner, U., Graetzel, M., & Heben, M. J. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600846 · Cited by 439
Ko, H.-S., Lee, J.-W., & Park, N.-G. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00658a · Cited by 334
Influence of Air Annealing on High Efficiency Planar Structure Perovskite Solar Cells
Raga, S. R., Jung, M.-C., Lee, M. V., Leyden, M. R., Kato, Y., & Qi, Y. (2015) · Chemistry of Materials · doi:10.1021/cm5041997 · Cited by 280
Jung, J. W., Williams, S. T., & Jen, A. K.-Y. (2014) · RSC Adv. · doi:10.1039/c4ra13212b · Cited by 194
Luo, P., Liu, Z., Xia, W., Yuan, C., Cheng, J., & Lu, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am5077588 · Cited by 193
Annealing-free perovskite films by instant crystallization for efficient solar cells
Yin, M., Xie, F., Chen, H., Yang, X., Ye, F., Bi, E., Wu, Y., Cai, M., & Han, L. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta02490d · Cited by 125
Sfyri, G., Kumar, C. V., Raptis, D., Dracopoulos, V., & Lianos, P. (2014) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2014.11.034 · Cited by 59
Cited by
Perovskite precursor solution chemistry: from fundamentals to photovoltaic applications
Jung, M., Ji, S.-G., Kim, G., & Seok, S. I. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00656c · Cited by 816
Highly Efficient Thermally Co-evaporated Perovskite Solar Cells and Mini-modules
Li, J., Wang, H., Chin, X. Y., Dewi, H. A., Vergeer, K., Goh, T. W., Lim, J. W. M., Lew, J. H., Loh, K. P., Soci, C., et al. (2020) · Joule · doi:10.1016/j.joule.2020.03.005 · Cited by 378
Yang, Z., Zhang, W., Wu, S., Zhu, H., Liu, Z., Liu, Z., Jiang, Z., Chen, R., Zhou, J., Lu, Q., et al. (2021) · Science Advances · doi:10.1126/sciadv.abg3749 · Cited by 324
Metadata
- Authors
- Troughton, J., Hooper, K., & Watson, T. M.
- Venue
- Nano Energy
- Publisher
- Elsevier BV
- Published
- 2017-09
- Volume
- 39
- Pages
- 60-68
- ISSN
- 2211-2855 (ISSN-L)
- OpenAlex
- W2652363653
- Cited by
- 258
- References
- 33
- FWCI
- 12.64
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.