The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Towards high performance Li metal batteries: Nanoscale surface modification of 3D metal hosts for pre-stored Li metal anodes
Abstract
Abstract The Li metal anode is an ideal candidate for next-generation batteries due to its ultra-high specific capacity (3860 mAh g−1) and low electrochemical potential (−3.040 V vs. standard hydrogen electrode). However, the large volume fluctuations, side reactions, and dendrite growth are serious problems that need to be solved before Li metal batteries (LMBs) can be commercialized. Herein, we develop a lithiophilic 3D Cu nanowire (3D CuNW) host that can enable molten Li infusion into the structure. Interestingly, the 3D host undergoes a structural transformation upon contact with molten Li and forms Cu-Li alloy crystallites on the surface, leading to the development of an ultra-high performance Li metal anode (3D Li@CuLi). The symmetrical cell performance of the 3D Li@CuLi electrode is found to be among the best reported for carbonate-based electrolytes and can achieve greater than 200 cycles at an ultra-high current density of 10 mA cm−2. Furthermore, full cells coupled with LiFePO4 cathodes show excellent cycling stability at a C-rate of 2 C for over 400 cycles with negligible capacity fade. This work provides a scalable and highly effective approach towards the fabrication of high performance 3D hosts with pre-stored Li metal for next-generation battery systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
Cited by
Towards practical lithium-metal anodes
Zhang, X., Yang, Y., & Zhou, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00838a · Cited by 726
Zheng, J., Kim, M. S., Tu, Z., Choudhury, S., Tang, T., & Archer, L. A. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00883g · Cited by 466
Advances in the Design of 3D‐Structured Electrode Materials for Lithium‐Metal Anodes
Park, S., Jin, H., & Yun, Y. S. (2020) · Advanced Materials · doi:10.1002/adma.202002193 · Cited by 301
Metadata
- Authors
- Adair, K. R., Iqbal, M., Wang, C., Zhao, Y., Banis, M. N., Li, R., Zhang, L., Yang, R., Lu, S., & Sun, X.
- Venue
- Nano Energy
- Publisher
- Elsevier BV
- Published
- 2018-12
- Volume
- 54
- Pages
- 375-382
- ISSN
- 2211-2855 (ISSN-L)
- OpenAlex
- W2896843357
- Cited by
- 168
- References
- 2
- FWCI
- 6.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Towards high performance Li metal batteries: Nanoscale surface modification of 3D metal hosts for pre-stored Li metal anodes. https://app.cochat.ai/papers/10.1016/j.nanoen.2018.10.002
- The paper
- Adair, K. R., Iqbal, M., Wang, C., Zhao, Y., Banis, M. N., Li, R., Zhang, L., Yang, R., Lu, S., & Sun, X. (2018). Towards high performance Li metal batteries: Nanoscale surface modification of 3D metal hosts for pre-stored Li metal anodes. Nano Energy. https://doi.org/10.1016/j.nanoen.2018.10.002
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.