The DOI matches its Crossref record; 410 of the 414 references it cites were found in a registry or an index.
Degradation mechanisms of proton exchange membrane fuel cell under typical automotive operating conditions
Abstract
Abstract The proton exchange membrane (PEM) fuel cell is an ideal automotive power source with great potential, owing to its high efficiency and zero emissions. However, the durability and life-span limit its large-scale application. Complex automotive operating conditions significantly accelerate fuel cell aging, and result in diverse degradation mechanisms that require comprehensive understanding. This review focuses on three harsh conditions of open-circuit/idling, dynamic load, and startup-shutdown. In-situ and ex-situ accelerated stress tests (ASTs) for the three conditions are summarized in terms of methodology, research objectives, and conditions of application. Reversible decay may arise during ASTs and lead to an over-estimation of the aging state, of which the causes and recovery procedures are emphasized. The degradation mechanisms are elaborated systematically according to parameter characteristics, microstructure, and aging reactions. First, increased gas permeation and a high cathode potential during open-circuit/idling combine to intensify generation of free radicals that cause membrane degradation. Pt degradation and migration are also accelerated, characterized by increased Pt particle growth and precipitation in the membrane. The debate regarding the effect of Pt precipitation on membrane degradation is resolved based on a literature review. Second, dynamic load brings about changes in the thermal/humidity state, altered reactant demand, and potential cycling, which lead to mechanical degradation, gas starvation, and Pt particle growth, respectively. To account for the accelerated particle growth, electrochemical Ostwald ripening and increased Pt dissolution are reviewed. Third, an air/hydrogen boundary appears in the anode under startup-shutdown condition and causes carbon corrosion in the local cathode via the reverse current mechanism. The cathode thereby suffers from severe and non-uniform structural damage and even structural collapse, accompanied by Pt agglomeration and detachment. Meanwhile, difficulties in mass transfer arise because of ionomer redistribution, decreased porosity, and carbon surface hydrophilization. In addition, cold start produces severe damage to component structures. This paper seeks to guide further investigation into improved fuel cell durability via mechanism analysis, condition optimization, control strategy development, structural design of the membrane electrode assembly, and component material development.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“at the anode, reactive oxygen species are likely to be generated under inappropriate operation (e.g., H 2 starvation, start-up/ shut-down and reversal), leading to aggressive material degradation (e.g., membrane and ionomer) [22].”
From Recent Advances on PEM Fuel Cells: From Key Materials to Membrane Electrode Assembly (2023) · cites this paper as [22]
Citations
Cites
1 retracted
Taherian, R. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.04.081 · Cited by 280
RetractedElectrochemical Methods: Fundamentals and Applications
Bard, A. J., & Faulkner, L. R. (1980) · Cited by 22,436
Electrocatalyst approaches and challenges for automotive fuel cells
Debe, M. K. (2012) · Nature · doi:10.1038/nature11115 · Cited by 5,885
Dicks, A. L., & Rand, D. A. J. (2018) · Wiley eBooks · doi:10.1002/9781118706992 · Cited by 4,241
Polymer Electrolyte Fuel Cell Model
Springer, T. E., Zawodzinski, T. A., & Gottesfeld, S. (1991) · Journal of The Electrochemical Society · doi:10.1149/1.2085971 · Cited by 3,528
Scientific Aspects of Polymer Electrolyte Fuel Cell Durability and Degradation
Borup, R. L., Meyers, J. P., Pivovar, B. S., Kim, Y. S., Mukundan, R., Garland, N., Myers, D. J., Wilson, M. S., Garzón, F. H., Wood, D. L., et al. (2007) · Chemical Reviews · doi:10.1021/cr050182l · Cited by 3,492
A review of PEM fuel cell durability: Degradation mechanisms and mitigation strategies
Wu, J., Yuan, X. Z., Martin, J. J., Wang, H., Zhang, J., Shen, J., Wu, S., & Merida, W. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.06.006 · Cited by 1,587
Sintering of Catalytic Nanoparticles: Particle Migration or Ostwald Ripening?
Hansen, T. W., Delariva, A. T., Challa, S. R., & Datye, A. K. (2013) · Accounts of Chemical Research · doi:10.1021/ar3002427 · Cited by 1,513
Instability of Pt∕C Electrocatalysts in Proton Exchange Membrane Fuel Cells
Ferreira, P. J., la O’, G. J., Shao‐Horn, Y., Morgan, D. D., Makharia, R. R., Kocha, S. S., & Gasteiger, H. A. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.2050347 · Cited by 1,492
Water transport in polymer electrolyte membrane fuel cells
Jiao, K., & Li, X. (2011) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2010.06.002 · Cited by 1,086
Flagged first, then by citations
4 of the 414 references couldn’t be matched to a known paper.
Research works printed but not linked: 4
- WolfVielstich, ArnoldLamm, Gasteiger H.Handbook of fuel cells: fundamentals, technology, and applications: Wiley; 2009.
- Yuan, 2012, Degradation of a PEM fuel cell stack with Nafion® membranes of different thicknesses, Part II: Ex situ diagnosis. Journal of Power Sources., 205, 324
- Hild, 2010, Cathode humidification of a PEM fuel cell through exhaust gas recirculation into a positive displacement compressor, Google Patents
- Weber, 2014, A critical review of modeling transport phenomena in polymer-electrolyte fuel cells, Journal of The Electrochemical Society, 161, F1254, 10.1149/2.0751412jes · DOI
Cited by
Sorted by citations
Items 401–500 of 737
Pan, Y., Wang, H., & Brandon, N. P. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.235574 · Cited by 8
Oh, J., Ryu, H., Hwang, J., Kim, K., Park, S., Lee, S., & Kim, H. S. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.235677 · Cited by 8
Aggarwal, M., Valentin, D., Cappelli, S., Loidl, T., Pertl, P., & Trattner, A. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.11.287 · Cited by 8
Xu, H., Chen, F., Cheng, J., Bai, Y., Zhao, S., Wu, Y., & Lu, Y. (2025) · Energy · doi:10.1016/j.energy.2025.134379 · Cited by 8
Zhao, Y. R., Luo, M., Yang, J., Chen, B., Sui, P., & Wei, Z. (2025) · International Journal of Energy Research · doi:10.1155/er/3246950 · Cited by 8
Fuchs, B., Altmann, F., Vrlić, M., Braun, S., Kozek, M., Hametner, C., & Jakubek, S. (2025) · Nonlinear Dynamics · doi:10.1007/s11071-025-11108-0 · Cited by 8
Li, W., Wang, Q., Liu, Y., Wu, L., Pan, Z., Chen, R., & An, L. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.162204 · Cited by 8
Kang, W., Liu, C., Wang, C., Jia, L., Xue, H., & Sun, W. (2025) · Energy · doi:10.1016/j.energy.2025.136731 · Cited by 8
PEMFC Catalyst Layer Degradation at Intermediate Temperatures (80°C, 100°C, and 120°C)
Strandberg, L., Tóth, G., Göransson, G., Shokhen, V., & Wickman, B. (2025) · Fuel Cells · doi:10.1002/fuce.70009 · Cited by 9
Bampaou, M., Georgiou, D., Papaioannou, K., & Panopoulos, K. D. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.151574 · Cited by 8
Ji, W., Cai, X. L., Ma, Y., Liu, X., Friedrich, K. A., & Lin, R. (2025) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2025.10.050 · Cited by 8
Zhang, L., Wang, J. C., Song, Y., Zheng, W., Li, B., Zhang, C., & Ming, P. (2026) · Advanced Energy Materials · doi:10.1002/aenm.202504621 · Cited by 9
Heidari, H., Esmaili, Q., & Ranjbar, A. A. (2022) · International Journal of Energy Research · doi:10.1002/er.8755 · Cited by 8
Understanding Potential Decay during OCV Hold via Dry Recovery Process
Basha, A. B. M., & Karan, K. (2023) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/acd724 · Cited by 10
Farsi, A., & Rosen, M. A. (2023) · e-Prime - Advances in Electrical Engineering Electronics and Energy · doi:10.1016/j.prime.2023.100174 · Cited by 8
Manufacturing defects in slot die coated polymer electrolyte membrane for fuel cell application
Shrivastava, N. K., Chatterjee, A., & Harris, T. A. L. (2023) · Chemical Engineering Science · doi:10.1016/j.ces.2023.119051 · Cited by 8
Criss-crossed matching design of the bipolar plate in PEMFC considering unavoidable assembly errors
Yang, Q., Zhang, N., Hu, X.-Q., & Xiao, G. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.03.181 · Cited by 8
Tang, W., Chang, G., Xie, J., Wang, C., Shen, J., Pan, X., Du, D., Liu, Z., Yuan, H. S., Wei, X., et al. (2024) · Applied Energy · doi:10.1016/j.apenergy.2024.123484 · Cited by 8
Gan, Z., Chen, T., Zhang, R., & Zhang, R. (2024) · Fuel Cells · doi:10.1002/fuce.202400059 · Cited by 8
Strategy optimization of proton exchange membrane fuel cell cold start
Ji, W., & Lin, R. (2022) · Chinese Science Bulletin (Chinese Version) · doi:10.1360/tb-2021-1371 · Cited by 8
Gao, W., Lu, J., Chen, J., Zhang, L., Zhang, Z. P., Lei, Y., Ouyang, H., Yin, Y., & Wang, C. (2024) · Electrochemistry Communications · doi:10.1016/j.elecom.2024.107718 · Cited by 7
Influence of trapezoidal channel design on volume power density of ammonia-hydrogen fuel cells
Hu, J., Liu, Y., He, X., & Zhao, J. (2024) · International Journal of Electrochemical Science · doi:10.1016/j.ijoes.2024.100676 · Cited by 7
Lin, L., Cai, Z., Niu, Y., Wu, Y., Wang, J., Li, M., Li, D., Wang, T., Wang, Z., Li, T., et al. (2024) · Angewandte Chemie International Edition · doi:10.1002/anie.202419919 · Cited by 7
Simamora, R. M. A., Setyadi, J. P., Pravitasari, R. D., Arjasa, O. P., Damisih, D., Hapsari, A. U., Raharjo, J., Indayaningsih, N., Subhan, A., Budiman, A. H., et al. (2024) · ACS Applied Energy Materials · doi:10.1021/acsaem.4c02341 · Cited by 7
Wu, Q., Li, S., Hou, Z., Lu, L., Gu, X. Y., Chen, H., & Luan, W. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.02.080 · Cited by 7
Jiang, P., Wu, F., Yu, W., Huang, Z., Huang, X., Zhan, Z., Shang, L., & Pan, M. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.164666 · Cited by 7
Park, G., Choi, K., Kim, M., Cho, E., Sung, K., & Kum, D. (2025) · Applied Energy · doi:10.1016/j.apenergy.2025.126246 · Cited by 7
Reversible voltage losses and recovery in automotive polymer electrolyte membrane fuel cell systems
Arnold, P., Kirsch, S., & Hanke‐Rauschenbach, R. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.237857 · Cited by 7
Xing, S., Chen, C., Keneshbekova, A., Yang, R., Chen, J., Wu, Q., Rogachev, A. V., Jiang, X., Makhmanov, U. K., Li, W., et al. (2025) · Journal of Membrane Science · doi:10.1016/j.memsci.2025.124563 · Cited by 7
Zhang, H., Guo, Q., Qi, Y., Feng, Y., Tian, X., & Yang, Z. (2025) · Ceramics International · doi:10.1016/j.ceramint.2025.11.428 · Cited by 7
Xiao, Y., Zheng, W., Chu, T., Wang, J., Ming, P., & Li, B. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.168826 · Cited by 7
Hwang, J., Park, K., Ryu, H. Y., Park, J., Yoon, W., Son, B. K., Lee, S., & Kim, H. S. (2026) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2026.154326 · Cited by 7
Zhang, X., Chen, S., Hong, J., Yan, X., Liu, X., & Yang, S. (2026) · eTransportation · doi:10.1016/j.etran.2026.100602 · Cited by 7
Chen, S., Zheng, F., & Li, J. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.120830 · Cited by 7
Dudek, M., Zarzycki, M., Raźniak, A., & Rosół, M. (2023) · Energies · doi:10.3390/en16227531 · Cited by 7
Sharma, P., Cheng, L., Aaron, D. S., Mehrazi, S., Braaten, J. P., Craig, N., Johnston, C., & Mench, M. M. (2023) · Small · doi:10.1002/smll.202306433 · Cited by 7
Potential of Proton-Exchange Membrane Fuel-Cell System with On-Board O2-Enriched Air Generation
Piqueras, P., la Morena, J. D., Sanchís, E. J., & Lalangui, J. A. (2024) · Applied Sciences · doi:10.3390/app14020836 · Cited by 7
Chen, F., Meng, L., Liang, H., & Xu, J. (2024) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2024.03.032 · Cited by 7
Luo, C., Guo, Q., Feng, C., Wang, Y., Ming, P., & Zhang, C. (2024) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ad34fe · Cited by 7
Drugeot, T., Wane, R., Micoud, F., Pinton, E., Guétaz, L., Mermoux, M., & Bultel, Y. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.08.395 · Cited by 7
Mechanisms and characterization of interzone mass transfer inhomogeneity in PEM fuel cells
Chen, H., Shi, E., Zhang, R., Ren, P., Wang, H., Zhu, Z., Fu, X., & Pei, P. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.157063 · Cited by 7
Self-citationChen, F., Zhang, J., Pei, Y., Chi, X., Zhang, H., & Wang, Y. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.12.349 · Cited by 7
Zhu, C., & Xing, Y. (2025) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/adbec2 · Cited by 7
Li, Z., Huang, H., Wang, Y., Mu, Y., Jiang, Y., Zhang, Q., Zhao, T. S., & Zeng, L. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.144189 · Cited by 7
Arias, J. J. R., Bento, S. D. S., Marques, M. D. F. V., & Gomes, A. D. S. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.49871 · Cited by 7
Characteristic Analysis of Fuel Cell Decay Based on Actual Vehicle Operating Conditions
Zhao, Y., Wang, Q., Xu, L., Hu, Z., Jia, X., Qin, Z., Li, J., & Ouyang, M. (2021) · IEEE International Electrical and Energy Conference (CIEEC) · doi:10.1109/cieec50170.2021.9510334 · Cited by 7
Brancaleoni, P. P., Ferretti, A. N. D., Corti, E., Ravaglioli, V., & Moro, D. (2025) · SAE International Journal of Advances and Current Practices in Mobility · doi:10.4271/2025-01-8593 · Cited by 7
Kemperdick, T., Letmathe, P., Brachmann, T., Jahn, S., & Poeppel, A. (2025) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2025.145432 · Cited by 6
Yuan, H. S., Tan, D., Zhong, Z., Zhu, J., Ming, P., Wei, X., & Dai, H. (2026) · Nature Communications · doi:10.1038/s41467-026-69321-3 · Cited by 6
Understanding and engineering electrocatalyst durability
Zhu, E., Liu, Y., Zhang, A., Wang, Y., HE, Y. J., Duan, X., & Huang, Y. (2026) · Nature Reviews Materials · doi:10.1038/s41578-026-00937-z · Cited by 9
Operation features of PEMFCs with De-alloyed PtCu/C catalysts
Pavlets, A. S., Titskaya, E., Alekseenko, A. A., Pankov, I. V., Ivanchenko, A., & Falina, I. V. (2023) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2023.07.028 · Cited by 6
Shojaeefard, . H., & Raeesi, M. (2023) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2023.10.102 · Cited by 6
Shao, W., Zhou, Y., & Hu, Z.-Y. (2024) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2024.107459 · Cited by 6
Guo, Z. R., Chen, H., Guo, H., Gao, Z., & Ye, F. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.235357 · Cited by 6
Lv, L., Pei, P., Ren, P., Wang, H., & Wang, G. (2025) · Energies · doi:10.3390/en18051191 · Cited by 8
Self-citationRíos, G. M., Becker, F., Vorndran, A., Gentner, C., & Ansar, S. A. (2022) · E3S Web of Conferences · doi:10.1051/e3sconf/202233406004 · Cited by 6
Zhang, L., Liu, Y., Pei, P., Liu, X., Wang, L., & Wan, Y. (2022) · Energies · doi:10.3390/en15093280 · Cited by 6
Self-citationSchuller, A., Schmidt, T. J., & Eller, J. (2022) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac7a62 · Cited by 6
Yeon, J. H., Jang, Y., Lee, S., Kim, S., Choi, M., & Jang, S. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.235388 · Cited by 5
Liu, F., Ji, X. D., Gao, Z., Jiang, J., Li, Y., Guo, L., & Su, J. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.151183 · Cited by 5
Self-citationHuang, Y., Huang, R., Li, Y., Shi, Y., Lei, Y., Yu, T., Wang, C., & Gu, J. (2025) · Carbon · doi:10.1016/j.carbon.2025.120921 · Cited by 5
Self-citationChen, G., Wang, Z., Ma, D., Liu, J., Jiang, H., Wang, K. Y., Zhang, X., Wang, H., Zhu, Z., Ren, P., et al. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.151985 · Cited by 5
Self-citationWang, Z., Fan, L., Tongsh, C., Wu, S., Qin, Z., Du, Q., & Jiao, K. (2025) · eTransportation · doi:10.1016/j.etran.2025.100520 · Cited by 5
Yue, F., Yang, J., Ma, Q., Sheng, W., Li, C., Han, X., Xu, W., Sun, C., Zhao, S. Z., Zhou, J., et al. (2025) · Angewandte Chemie International Edition · doi:10.1002/anie.202516035 · Cited by 5
Abdollahi, F., Malek, K., Kadyk, T., Kulyk, N., Gerling, C., & Eikerling, M. H. (2026) · Fuel Cells · doi:10.1002/fuce.70068 · Cited by 5
Li, J., Chen, L., Tian, Z., Yang, Q., Yin, C., Liu, J., Wang, L., Hou, Y., Hao, D., Zong, L., et al. (2026) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2026.116846 · Cited by 5
Kabouchi, K., Ettouhami, M. K., & Mounir, H. (2024) · Mathematical Modelling and Engineering Problems · doi:10.18280/mmep.110624 · Cited by 5
Optimizing PEM fuel cells: Strategies to address local reverse polarity issue
Liu, H., Pei, H., Cai, S., Tu, Z., & Lu, X. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.02.385 · Cited by 5
Lee, S. H., Lim, J., Park, J.-Y., Kim, M., Goo, Y., & Shin, D. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.04.131 · Cited by 5
Technological risks and durability issues for the Proton Exchange Membrane Fuel Cell technology
Ponnusamy, P., Panthalingal, M. K., & Pullithadathil, B. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-823708-3.00016-x · Cited by 5
Energy Efficiency Management of Coupling System for Molten Carbonate Fuel Cells
Wu, J.-J., & Chen, L. (2022) · International Journal of Electrochemical Science · doi:10.20964/2022.09.35 · Cited by 5
Lee, Y. H., Park, J. Y., Choi, J., Lim, I. S., 차송훈, Lee, Y., & Kim, M. S. (2023) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2023.07.318 · Cited by 5
Qu, Y., Qin, B., Sun, H. Y., & Sun, G. (2024) · Energy Technology · doi:10.1002/ente.202301299 · Cited by 5
Wang, Q., Wei, X., Wu, Y., Ma, G., Lei, Z., & Ren, S. (2024) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2024.03.097 · Cited by 5
Theerthagiri, S., Rachman, I. B., Islam, M. S., Hanantyo, M. P. G., & Song, S. (2025) · Polymers for Advanced Technologies · doi:10.1002/pat.70064 · Cited by 5
Development of a cloud-based toolchain for data science in fuel cell vehicles
Toussaint, J. N., Mertes, S., Schmidt, M., Sterlepper, S., Walters, M., & Pischinger, S. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.237276 · Cited by 5
YOO, D., KIM, H., Oh, S., & Park, K.-P. (2021) · Journal of Hydrogen and New Energy · doi:10.7316/khnes.2021.32.5.315 · Cited by 5
Möller, L., Rink, M., Kemmer, H., & von Unwerth, T. (2023) · Journal of Power Sources · doi:10.1016/j.jpowsour.2023.233606 · Cited by 5
Hydrogen Production and Polymer Electrode Membrane (PEM) Fuel Cells for Electrical Vehicles
Altaf, Ç. T., Colak, T. O., Kumtepe, A., Karagöz, E., Coşkun, Ö., Sankır, N. D., & Sankır, M. (2023) · doi:10.1002/9781394167555.ch6 · Cited by 5
Paulus, N., Lemort, V., & Job, N. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4811842 · Cited by 5
Nurmanova, S., Aimaganbetov, K., Abdrakhmanov, K., Kolisnichenko, S., Almas, N., Abugalieva, F., Kabdrakhimova, G. D., & Abdirashev, O. K. (2024) · Ionics · doi:10.1007/s11581-024-05733-9 · Cited by 4
Zou, W., & Li, J. (2024) · Renewable Energy · doi:10.1016/j.renene.2024.121782 · Cited by 4
Thiel, S., & Eichelbaum, M. (2025) · ACS Measurement Science Au · doi:10.1021/acsmeasuresciau.5c00071 · Cited by 5
Development strategies and performance evaluation of proton exchange membranes
Luo, Z., Gao, X. P., Hu, Y., Yao, Z., Ohta, N., & Yi, W. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.238702 · Cited by 4
Path-dependent degradation in high-performance polymer electrolyte fuel cells (PEFCs)
Sharma, P., Cheng, L., Mehrazi, S., Aaron, D. S., Johnston, C., & Mench, M. M. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.171029 · Cited by 4
Zhang, Y., Gao, D., Wang, Y., & Huang, Z. (2025) · Energy Engineering · doi:10.32604/ee.2025.068656 · Cited by 4
Quan, R., Liu, D., & Zhou, Y. (2026) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2026.3665713 · Cited by 4
Zhou, J., Ma, T., Tao, Y., Li, R., Gu, Z., Yao, N., Shi, L., & Su, J. (2026) · Renewable Energy · doi:10.1016/j.renene.2026.125743 · Cited by 4
Liu, Y., Shi, Z., Yi, S., Zhang, X., Zhang, B., Wang, D., & Liu, S. (2026) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2026.155082 · Cited by 4
Current status and prospects of fuel cell electric vehicle industrialization in China
Luo, S., Zhang, K., Li, G., Li, X., Wang, Q., 邢丹敏, & Yi, B. (2026) · Carbon Neutrality · doi:10.1007/s43979-026-00171-0 · Cited by 4
Morozova, S. M. (2024) · Materials Today Communications · doi:10.1016/j.mtcomm.2024.111390 · Cited by 4
Deng, H., Liu, J., & Hou, Z.-J. (2025) · Journal of Electrochemistry · doi:10.61558/2993-074x.3546 · Cited by 4
In-situ estimation of nitrogen concentration in fuel cell systems via anode pressure drop modeling
Yao, N., Ma, T., Lin, W., Shi, L., Yang, Y., Li, R., Gu, Z., Qi, J., Li, E., & Guo, Q. (2025) · eTransportation · doi:10.1016/j.etran.2025.100444 · Cited by 4
Chen, Q., Yu, C., Watanabe, T., Kawasumi, M., Huda, M., & Matsuo, Y. (2025) · Nanoscale · doi:10.1039/d5nr02497h · Cited by 4
Agravante, G., & Gostick, J. T. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.238878 · Cited by 4
Rašić, D., Kravos, A., & Katrašnik, T. (2026) · Energy Conversion and Management · doi:10.1016/j.enconman.2026.121254 · Cited by 4
Zheng, W., Li, H., Dong, X., Lu, Y., Li, B., & Ming, P. (2026) · Journal of Power Sources · doi:10.1016/j.jpowsour.2026.240546 · Cited by 4
Hu, Y., Ding, S., Pan, M., Xu, J., Zhang, Y., Wu, W., & Xia, R. (2023) · Journal of Applied Polymer Science · doi:10.1002/app.54271 · Cited by 4
Shen, C., Zhu, Y., Zhou, Q., Hu, S., & Zhang, X. (2023) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ad0511 · Cited by 4
Trend‐focused dynamic degradation prediction based on echo state networks in automotive fuel cells
Yue, M., Zhang, X., Teng, T., & Meng, J. (2024) · Energy Science & Engineering · doi:10.1002/ese3.1669 · Cited by 4
Metadata
- Authors
- Ren, P., Pei, P., Li, Y., Wu, Z., Chen, D., & Huang, S.
- Affiliations
- Tsinghua University (CN)
- Corresponding author
- Pei, Pucheng
- Venue
- Progress in Energy and Combustion Science
- Publisher
- Elsevier BV
- Published
- 2020-09
- Volume
- 80
- Pages
- 100859
- ISSN
- 0360-1285 (ISSN-L)
- OpenAlex
- W3033731711
- Semantic Scholar
- 5ff232ae7c1e6f9caa643b36c9457c5f54e0cb63
- Cited by
- 737
- References
- 414
- Citations by year
- 2026: 141 · 2025: 162 · 2024: 161 · 2023: 104 · 2022: 85 · 2021: 76 · 2020: 8
- FWCI
- 23.42
- Type
- journal article
- Language
- en
- Update notices
- erratum (2020-11-01)
- Open access
- closed
- Locations
- Progress in Energy and Combustion Science (publishedVersion)
- Funders
- National Natural Science Foundation of China (21676158, 21376138, 21975143)
- National Basic Research Program of China (2016YFB0101305, 2016YFB0101208, 2017YFB0102705)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Engineering › Automotive Engineering › Electric and Hybrid Vehicle Technologies
- Keywords
- proton exchange membrane fuel cells, fuel cell durability, accelerated stress testing, dynamic loading, gas permeation, free radicals, membrane degradation, gas starvation, mechanical degradation, Ostwald ripening, platinum dissolution, carbon corrosion, cold start, membrane electrode assembly
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
