Cited by 634Thermochemical Biomass Conversion ProcessesThermal and Kinetic AnalysisMunicipal Solid Waste Management

The DOI matches its Crossref record; 249 of the 249 references it cites were found in a registry or an index.

Co-pyrolysis of waste plastic and solid biomass for synergistic production of biofuels and chemicals-A review

Open access

Wang, Zhiwei, Burra, Kiran G., Lei, Tingzhou, Gupta, Ashwani K.·2021·Progress in Energy and Combustion Science

DOI 10.1016/j.pecs.2020.100899

Open this paper in CoChat — free account

Abstract

Abstract The amount of plastics disposed from modern lifestyles have increased sharply in recent years. Solid biomass is an abundant energy resource that exists worldwide. Transformation of these waste plastics and solid biomass feedstock mixtures via co-pyrolysis can provide synergistic product enhancement for fuels and value-added products. The produced products can be used as chemicals and pollutant sorbents to foster eco-friendly pathways for waste management and sustainability. Progress into this avenue of waste disposal and energy production is the focus of this review. Properties of characteristic solid feedstock mixtures are discussed with focus on elemental composition, proximate analysis, and heating value. Effective H to C ratio of the different feedstocks is evaluated for asserting the quality of petrochemical equivalent products produced from co-pyrolysis of plastic wastes and biomass. The characteristics of polyethylene terephthalate (PET), high density and low-density polyethylene (HDPE & LDPE), polyvinyl chloride (PVC), polypropylene (PP), polystyrene (PS) and other major plastic waste components are discussed with focus on synergistic effects attainable by co-pyrolyzing them with biomass. State-of-the-art experimental methods for co-pyrolysis investigation are reviewed in detail using TGA, pyrolyzer, fixed bed reactor, fluidized bed reactor, microwave, and multi-step reactors using GC, MS, and FTIR diagnostics. In addition, different catalytic co-pyrolysis reactors are compared and discussed at different ratios of feedstock to catalyst, reactor temperature, and other operational parameters along with an in-depth understanding of several catalytic processing (ZSM-5 based catalyst, transition metal-based catalyst, multipurpose catalysts and ex-situ catalyst) for favorable products yield. Co-pyrolysis of waste plastic and solid biomass mixtures are reviewed for insights into liquid products for fuels and chemicals, as well as yield and composition of gases and solid residues evolved along with surface characteristics of the solid residues obtained from the selected configurations. The challenges and opportunities envisioned for the development in co-pyrolysis of several solid organic waste and plastic feedstock mixtures are also discussed. The goal was to provide favorable feasible pathways for clean and efficient disposal of plastic wastes with the incorporation of waste biomass for enhanced synergistic effects in waste disposal along with the recovery of energy and value-added products.

Integrity signals

Registry

Crossref · 10.1016/j.pecs.2020.100899

Cites

249 of 249 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Production, use, and fate of all plastics ever made
Geyer, R., Jambeck, J. R., & Law, K. L. (2017) · Science Advances · doi:10.1126/sciadv.1700782 · Cited by 18,606
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
Review of fast pyrolysis of biomass and product upgrading
Bridgwater, A. V. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.048 · Cited by 4,856
Lignocellulosic biomass pyrolysis mechanism: A state-of-the-art review
Wang, S., Dai, G., Yang, H., & Luo, Z. (2017) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2017.05.004 · Cited by 2,670
Overview of recent advances in thermo-chemical conversion of biomass
Zhang, L., Xu, C. (., & Champagne, P. (2010) · Energy Conversion and Management · doi:10.1016/j.enconman.2009.11.038 · Cited by 1,217
Current research trends on plastic pollution and ecological impacts on the soil ecosystem: A review
Chae, Y., & An, Y. (2018) · Environmental Pollution · doi:10.1016/j.envpol.2018.05.008 · Cited by 1,185
Behavior of microplastics and plastic film residues in the soil environment: A critical review
Qi, R., Jones, D. L., Li, Z., Liu, Q., & Yan, C. (2019) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2019.134722 · Cited by 966
Plastic Degradation and Its Environmental Implications with Special Reference to Poly(ethylene terephthalate)
Webb, H. K., Arnott, J., Crawford, R. J., & Ivanova, E. P. (2012) · Polymers · doi:10.3390/polym5010001 · Cited by 964
A review on co-pyrolysis of biomass: An optional technique to obtain a high-grade pyrolysis oil
Abnisa, F., & Wan Daud, W. M. A. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.07.007 · Cited by 903
Recent advances in the gasification of waste plastics. A critical overview
Lopez, G., Artetxe, M., Amutio, M., Alvarez, J., Bilbao, J., & Olazar, M. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.09.032 · Cited by 852
Pyrolysis kinetics and thermal behavior of waste sawdust biomass using thermogravimetric analysis
Mishra, R. K., & Mohanty, K. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.12.029 · Cited by 821
Environment: Waste production must peak this century
Hoornweg, D., Bhada-Tata, P., & Kennedy, C. (2013) · Nature · doi:10.1038/502615a · Cited by 785
Biomass energy and the environmental impacts associated with its production and utilization
Abbasi, T., & Abbasi, S. A. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.11.006 · Cited by 713
Current state and future prospects of plastic waste as source of fuel: A review
Wong, S. L., Ngadi, N., Abdullah, T. A. T., & Inuwa, I. M. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.063 · Cited by 701
Pollutants from the combustion of solid biomass fuels
Williams, A., Jones, J. M., Ma, L., & Pourkashanian, M. M. (2011) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2011.10.001 · Cited by 661
Co-pyrolysis of biomass and waste plastics as a thermochemical conversion technology for high-grade biofuel production: Recent progress and future directions elsewhere worldwide
Uzoejinwa, B. B., He, X., Wang, S., Abomohra, A., Hu, Y., & Wang, Q. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.02.004 · Cited by 661
Plastics to fuel: a review
Kunwar, B., CHENG, H. N., Chandrashekaran, S. R., & Sharma, B. K. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.015 · Cited by 648
Catalytic upgrading of biomass pyrolysis vapors using transition metal-modified ZSM-5 zeolite
Iliopoulou, E. F., Stefanidis, S. D., Kalogiannis, K. G., Delimitis, A., Lappas, A. A., & Triantafyllidis, K. S. (2012) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2012.08.030 · Cited by 524
Catalytic conversion of biomass-derived feedstocks into olefins and aromatics with ZSM-5: the hydrogen to carbon effective ratio
Zhang, H., Cheng, Y., Vispute, T. P., Xiao, R., & Huber, G. W. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01230d · Cited by 523
Catalytic co-pyrolysis of lignocellulosic biomass with polymers: a critical review
Zhang, X., Lei, H., Chen, S., & Wu, J. (2016) · Green Chemistry · doi:10.1039/c6gc00911e · Cited by 497
Recent progress on biomass co-pyrolysis conversion into high-quality bio-oil
Hassan, H., Lim, J., & Hameed, B. H. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2016.09.026 · Cited by 408
Fuel oil production from municipal plastic wastes in sequential pyrolysis and catalytic reforming reactors
Syamsiro, M., Saptoadi, H., Norsujianto, T., Noviasri, P., Cheng, S., Alimuddin, Z., & Yoshikawa, K. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.01.212 · Cited by 389
Global patterns of socioeconomic biomass flows in the year 2000: A comprehensive assessment of supply, consumption and constraints
Krausmann, F., Erb, K.-H., Gingrich, S., Lauk, C., & Haberl, H. (2008) · Ecological Economics · doi:10.1016/j.ecolecon.2007.07.012 · Cited by 380
Biomass for energy: A review on supply chain management models
Nunes, L. J. R., Causer, T. P., & Ciolkosz, D. E. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109658 · Cited by 378
Thermochemical Processing of Biomass
(2011) · Wiley eBooks · doi:10.1002/9781119990840 · Cited by 376
Co-pyrolysis of pine cone with synthetic polymers
Brebu, M. A., Uçar, S., Vasile, C., & Yanık, J. (2010) · Fuel · doi:10.1016/j.fuel.2010.01.029 · Cited by 372
Is incineration the terminator of plastics and microplastics?
Yang, Z., Lü, F., Zhang, H., Wang, W., Shao, L., Ye, J., & He, P. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.123429 · Cited by 352
Thermogravimetric characteristics and kinetic of plastic and biomass blends co-pyrolysis
Zhou, L., Wang, Y., Huang, Q., & Cai, J. (2006) · Fuel Processing Technology · doi:10.1016/j.fuproc.2006.07.002 · Cited by 350
Bio-oil production via co-pyrolysis of almond shell as biomass and high density polyethylene
Önal, E., Uzun, B. B., & Pütün, A. E. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.11.022 · Cited by 350
Fast pyrolysis of biomass and waste plastic in a fluidized bed reactor
Xue, Y., Zhou, S., Brown, R. C., Kelkar, A. G., & Bai, X. (2015) · Fuel · doi:10.1016/j.fuel.2015.04.033 · Cited by 349
Kinetics of synergistic effects in co-pyrolysis of biomass with plastic wastes
Burra, K. R. G., & Gupta, A. K. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.03.117 · Cited by 349
Self-citation
Plastic pollutants: effective waste management for pollution control and abatement
Rajmohan, K. S., Chandrasekaran, R., Viswanathan, M. R., & Varjani, S. (2019) · Current Opinion in Environmental Science & Health · doi:10.1016/j.coesh.2019.08.006 · Cited by 348
Combustion, performance and emission analysis of a DI diesel engine using plastic pyrolysis oil
Kalargaris, I., Tian, G., & Gu, S. (2016) · Fuel Processing Technology · doi:10.1016/j.fuproc.2016.11.016 · Cited by 340
A review of densified solid biomass for energy production
Bajwa, D. S., Peterson, T., Sharma, N., Shojaeiarani, J., & Bajwa, S. G. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.07.040 · Cited by 335
Thermal and kinetic behaviors of biomass and plastic wastes in co-pyrolysis
Çepelioğullar, Ö., & Pütün, A. E. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.06.036 · Cited by 334
Agricultural residue production and potentials for energy and materials services
Bentsen, N. S., Felby, C., & Thorsen, B. J. (2013) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2013.09.003 · Cited by 329
Catalytic co-pyrolysis of biomass and polyethylene in a tandem micropyrolyzer
Xue, Y., Kelkar, A. G., & Bai, X. (2015) · Fuel · doi:10.1016/j.fuel.2015.10.125 · Cited by 325
Influence of injection timing on performance, emission and combustion characteristics of a DI diesel engine running on waste plastic oil
Mani, M., & Nagarajan, G. (2009) · Energy · doi:10.1016/j.energy.2009.07.010 · Cited by 322
Pyrolysis of waste materials using TGA-MS and TGA-FTIR as complementary characterisation techniques
Singh, S., Wu, C., & Williams, P. T. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.11.011 · Cited by 314
Hydrogen production from biomass and plastic mixtures by pyrolysis-gasification
Álvarez, J., Kumagai, S., Wu, C., Yoshioka, T., Bilbao, J., Olazar, M., & Williams, P. T. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.04.189 · Cited by 304
Recent advances on catalysts for improving hydrocarbon compounds in bio-oil of biomass catalytic pyrolysis
Bhoi, P., Ouedraogo, A. S., Soloiu, V., & Quirino, R. L. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109676 · Cited by 303
Catalytic co-pyrolysis of paper biomass and plastic mixtures (HDPE (high density polyethylene), PP (polypropylene) and PET (polyethylene terephthalate)) and product analysis
Chattopadhyay, J., Pathak, T. S., Srivastava, R., & Singh, A. (2016) · Energy · doi:10.1016/j.energy.2016.03.015 · Cited by 301
Biomass for energy in the European Union - a review of bioenergy resource assessments
Bentsen, N. S., & Felby, C. (2012) · Biotechnology for Biofuels · doi:10.1186/1754-6834-5-25 · Cited by 288
Study of the thermal behavior, kinetics, and product characterization of biomass and low-density polyethylene co-pyrolysis by thermogravimetric analysis and pyrolysis-GC/MS
Zheng, Y., Tao, L., Yang, X., Huang, Y., Liu, C., & Zheng, Z. (2018) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2018.04.001 · Cited by 288
Experimental investigation to identify the type of waste plastic pyrolysis oil suitable for conversion to diesel engine fuel
Mangesh, V. L., Padmanabhan, S., Tamizhdurai, P., & Ramesh, A. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119066 · Cited by 284
Performance, emission and combustion characteristics of a DI diesel engine using waste plastic oil
Mani, M., Subash, C., & Nagarajan, G. (2009) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2009.01.007 · Cited by 283
Characterisation and effect of using waste plastic oil and diesel fuel blends in compression ignition engine
Mani, M., Nagarajan, G., & Sampath, S. (2010) · Energy · doi:10.1016/j.energy.2010.10.049 · Cited by 281
TG/FTIR analysis on co-pyrolysis behavior of PE, PVC and PS
Wu, J., Chen, T., Luo, X., Han, D., Wang, Z., & Wu, J. (2014) · Waste Management · doi:10.1016/j.wasman.2013.12.005 · Cited by 277
Self-citation
Natural magnesium oxide (MgO) catalysts: A cost-effective sustainable alternative to acid zeolites for the in situ upgrading of biomass fast pyrolysis oil
Stefanidis, S. D., Karakoulia, S. A., Kalogiannis, K. G., Iliopoulou, E. F., Delimitis, A., Yiannoulakis, H., Zampetakis, T., Lappas, A. A., & Triantafyllidis, K. S. (2016) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2016.05.031 · Cited by 275
Co-precipitation, impregnation and so-gel preparation of Ni catalysts for pyrolysis-catalytic steam reforming of waste plastics
Yao, D., Yang, H., Chen, H., & Williams, P. T. (2018) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2018.07.075 · Cited by 274
Performance and emission analysis of blends of waste plastic oil obtained by catalytic pyrolysis of waste HDPE with diesel in a CI engine
Kumar, S., Prakash, R., Murugan, S., et al. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.05.028 · Cited by 271
Co-pyrolysis of wood biomass and synthetic polymer mixtures. Part I: influence of experimental conditions on the evolution of solids, liquids and gases
Sharypov, V. I., Marin, N., Beregovtsova, N. G., Baryshnikov, S. V., Кузнецов, Б. Н., Cebolla, V. L., & Weber, J. V. (2002) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(01)00167-x · Cited by 268
Synergistic effects in steam gasification of combined biomass and plastic waste mixtures
Burra, K. R. G., & Gupta, A. K. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.10.130 · Cited by 268
Self-citation
Current status and future perspectives for energy production from solid biomass in the European industry
Malico, I., Pereira, R. N., Gonçalves, A. C., & Sousa, A. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.06.022 · Cited by 265
A TG-FTIR investigation on the co-pyrolysis of the waste HDPE, PP, PS and PET under high heating conditions
Singh, R. K., Ruj, B., Sadhukhan, A. K., & Gupta, P. (2019) · Journal of the Energy Institute · doi:10.1016/j.joei.2019.09.003 · Cited by 265
Pyrolysis of water hyacinth biomass parts: Bioenergy, gas emissions, and by-products using TG-FTIR and Py-GC/MS analyses
Huang, H., Liu, J., Liu, H., Evrendilek, F., & Büyükada, M. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2020.112552 · Cited by 262
Co-pyrolysis of waste newspaper with high-density polyethylene: Synergistic effect and oil characterization
Chen, W., Shi, S., Zhang, J., Chen, M., & Zhou, X. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.01.005 · Cited by 252
H-ZSM5 Catalyzed Co-Pyrolysis of Biomass and Plastics
Dorado, C., Mullen, C. A., & Boateng, A. A. (2013) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc400354g · Cited by 243
Biological Recycling of Polyethylene Terephthalate: A Mini-Review
Koshti, R., Mehta, L. B., & Samarth, N. B. (2018) · Journal of Polymers and the Environment · doi:10.1007/s10924-018-1214-7 · Cited by 237
Characteristics of syngas from co-gasification of polyethylene and woodchips
Ahmed, I., Nipattummakul, N., & Gupta, A. K. (2010) · Applied Energy · doi:10.1016/j.apenergy.2010.07.007 · Cited by 235
Self-citation
Pyrolysis of biomass in the presence of Al-MCM-41 type catalysts
ADAM, J., Blazsó, M., MESZAROS, E., STOCKER, M., Nilsen, M. H., Bouzga, A. M., Hustad, J. E., Grønli, M. G., & Øye, G. (2005) · Fuel · doi:10.1016/j.fuel.2005.02.006 · Cited by 229
TG-FTIR-MS study of synergistic effects during co-pyrolysis of corn stalk and high-density polyethylene (HDPE)
Kai, X., Yang, T., Shen, S., & Li, R. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.11.065 · Cited by 229
Thermogravimetric analysis of the pyrolysis characteristics and kinetics of plastics and biomass blends
Oyedun, A. O., Tee, C. Z., Hanson, S., & Hui, C. W. (2014) · Fuel Processing Technology · doi:10.1016/j.fuproc.2014.08.010 · Cited by 227
TGA/MS/FT-IR study for kinetic evaluation and evolved gas analysis of a biomass/PVC co-pyrolysis process
Özsin, G., & Pütün, A. E. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.12.060 · Cited by 225
Thermal behavior and kinetic study for catalytic co-pyrolysis of biomass with plastics
Zhang, X., Lei, H., Zhu, L., Zhu, X., Qian, M., Yadavalli, G., Wu, J. Q., & Chen, S. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2016.08.068 · Cited by 222
Enhancing the production of renewable petrochemicals by co-feeding of biomass with plastics in catalytic fast pyrolysis with ZSM-5 zeolites
Li, X., Li, J., Zhou, G., Feng, Y., Wang, Y., Yu, G., Deng, S., Huang, J. G., & Wang, B. (2014) · Applied Catalysis A General · doi:10.1016/j.apcata.2014.05.015 · Cited by 220
Co-pyrolysis of sugarcane bagasse and low-density polyethylene: Influence of plastic on pyrolysis product yield
Dewangan, A., Pradhan, D., & Singh, R. (2016) · Fuel · doi:10.1016/j.fuel.2016.08.011 · Cited by 220
Fast microwave-assisted catalytic co-pyrolysis of lignin and low-density polyethylene with HZSM-5 and MgO for improved bio-oil yield and quality
Fan, L., Chen, P., Zhang, Y., Liu, S., Liu, Y., Wang, Y., Dai, L., & Ruan, R. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2016.11.072 · Cited by 218
Study on the co-pyrolysis of rice straw and high density polyethylene blends using TG-FTIR-MS
Kai, X., Li, R., Yang, T., Shen, S., Ji, Q., & Zhang, T. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.05.026 · Cited by 212
Improving the aromatic production in catalytic fast pyrolysis of cellulose by co-feeding low-density polyethylene
Li, X., Zhang, H., Li, J., Su, L., Zuo, J., Komarneni, S., & Wang, Y. (2013) · Applied Catalysis A General · doi:10.1016/j.apcata.2013.01.038 · Cited by 208
Co-pyrolysis of sugarcane bagasse and waste high-density polyethylene: Synergistic effect and product distributions
Hassan, H., Hameed, B. H., & Lim, J. (2019) · Energy · doi:10.1016/j.energy.2019.116545 · Cited by 208
Production of aromatic hydrocarbons from catalytic co-pyrolysis of biomass and high density polyethylene: Analytical Py–GC/MS study
Zhang, B., Zhong, Z., Ding, K., & Song, Z. (2014) · Fuel · doi:10.1016/j.fuel.2014.09.052 · Cited by 207
Microwave assisted co-pyrolysis of biomasses with polypropylene and polystyrene for high quality bio-oil production
Suriapparao, D. V., Boruah, B., Raja, D., & Vinu, R. (2018) · Fuel Processing Technology · doi:10.1016/j.fuproc.2018.02.019 · Cited by 207
Evaluation of the co-pyrolysis of lignin with plastic polymers by TG-FTIR and Py-GC/MS
Jin, W., Shen, D., Liu, Q., & Xiao, R. (2016) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.08.001 · Cited by 202
A detailed study of combustion characteristics of a DI diesel engine using waste plastic oil and its blends
Kaimal, V. K., & Vijayabalan, P. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.08.043 · Cited by 201
Origin of carbon in aromatic and olefin products derived from HZSM-5 catalyzed co-pyrolysis of cellulose and plastics via isotopic labeling
Dorado, C., Mullen, C. A., & Boateng, A. A. (2014) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2014.07.006 · Cited by 201
Thermogravimetric and mass spectrometric (TG-MS) analysis and kinetics of coal-biomass blends
Kandasamy, J., Kök, M. V., & Gökalp, İ. (2016) · Renewable Energy · doi:10.1016/j.renene.2016.08.072 · Cited by 200
Pyrolysis kinetics and synergistic effect in co-pyrolysis of Samanea saman seeds and polyethylene terephthalate using thermogravimetric analyser
Mishra, R. K., Sahoo, A., & Mohanty, K. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2019.121608 · Cited by 199
A review of catalytic microwave pyrolysis of lignocellulosic biomass for value-added fuel and chemicals
Morgan, H. M., Bu, Q., Liang, J., Liu, Y., Mao, H., Shi, A., Lei, H., & Ruan, R. R. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.01.059 · Cited by 199
Synergistic effects during co-pyrolysis of biomass and plastic: Gas, tar, soot, char products and thermogravimetric study
Jin, Q., Wang, X., Li, S., Mikulčić, H., Bešenić, T., Deng, S., Vujanović, M., Tan, H., & Kumfer, B. M. (2017) · Journal of the Energy Institute · doi:10.1016/j.joei.2017.11.001 · Cited by 198
Catalytic Co-pyrolysis of Biomass and Different Plastics (Polyethylene, Polypropylene, and Polystyrene) To Improve Hydrocarbon Yield in a Fluidized-Bed Reactor
Zhang, H., Nie, J., Xiao, R., Jin, B., Dong, C., & Xiao, G. (2014) · Energy & Fuels · doi:10.1021/ef4019299 · Cited by 195
Insights into pyrolysis and co-pyrolysis of biomass and polystyrene: Thermochemical behaviors, kinetics and evolved gas analysis
Özsin, G., & Pütün, A. E. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.07.059 · Cited by 190
Synergistic effects on char and oil produced by the co-pyrolysis of pine wood, polyethylene and polyvinyl chloride
Lu, P., Huang, Q., (Thanos) Bourtsalas, A. C., Chi, Y., & Yan, J. (2018) · Fuel · doi:10.1016/j.fuel.2018.05.072 · Cited by 190
Co-pyrolysis characteristics and kinetic analysis of organic food waste and plastic
Tang, Y., Huang, Q., Sun, K., Chi, Y., & Yan, J. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.09.210 · Cited by 188
Improving hydrocarbon yield from catalytic fast co-pyrolysis of hemicellulose and plastic in the dual-catalyst bed of CaO and HZSM-5
Ding, K., Zhong, Z., Wang, J. C., Zhang, B., Fan, L., Liu, S., Wang, Y., Liu, Y., Zhong, D., Chen, P. L., et al. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2018.03.138 · Cited by 187
Co-pyrolysis of palm shell and polystyrene waste mixtures to synthesis liquid fuel
Abnisa, F., Daud, W. M. A. W., Ramalingam, S., Azemi, M. N. B. M., & Sahu, J. N. (2013) · Fuel · doi:10.1016/j.fuel.2013.02.013 · Cited by 184
Fast co-pyrolysis of low density polyethylene and biomass residue for oil production
Yang, J., Rizkiana, J., Widayatno, W. B., Karnjanakom, S., Kaewpanha, M., Hao, X., Abudula, A., & Guan, G. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.05.008 · Cited by 183
Material flow analysis of polyethylene terephthalate in the US, 1996–2007
Kuczenski, B., & Geyer, R. (2010) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2010.03.013 · Cited by 181
Fast microwave-assisted catalytic co-pyrolysis of corn stover and scum for bio-oil production with CaO and HZSM-5 as the catalyst
Liu, S., Xie, Q., Zhang, B., Cheng, Y., Liu, Y., Chen, P. L., & Ruan, R. R. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2015.12.085 · Cited by 180
A Cost-effectiveness Analysis for Incineration or Recycling of Dutch Household Plastic Waste
Gradus, R. H. J. M., Nillesen, P. H. L., Dijkgraaf, E., & van Koppen, R. (2017) · Ecological Economics · doi:10.1016/j.ecolecon.2016.12.021 · Cited by 180
Co-pyrolysis of wood and plastics: Influence of plastic type and content on product yield, gas composition and quality
Ephraim, A., Minh, D. P., Lebonnois, D., Peregrina, C., Sharrock, P., & Nzihou, A. (2018) · Fuel · doi:10.1016/j.fuel.2018.04.140 · Cited by 179
Enhancement of jet fuel range alkanes from co-feeding of lignocellulosic biomass with plastics via tandem catalytic conversions
Zhang, X., Lei, H., Zhu, L., Qian, M., Zhu, X., Wu, J., & Chen, S. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.04.071 · Cited by 178
Catalytic fast co-pyrolysis of biomass and food waste to produce aromatics: Analytical Py–GC/MS study
Zhang, B., Zhong, Z., Min, M., Ding, K., Xie, Q., & Ruan, R. R. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2015.03.092 · Cited by 173
Hydrogen-rich gas production by continuous pyrolysis and in-line catalytic reforming of pine wood waste and HDPE mixtures
Arregi, A., Amutio, M., López, G., Artetxe, M., Álvarez, J., Bilbao, J., & Olazar, M. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.01.008 · Cited by 172
Thermal behavior and kinetic study for co-pyrolysis of lignocellulosic biomass with polyethylene over Cobalt modified ZSM-5 catalyst by thermogravimetric analysis
Xiang, Z., Liang, J., Morgan, H. M., Liu, Y., Mao, H., & Bu, Q. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.09.178 · Cited by 172
Study of the co-pyrolysis of biomass and plastic wastes
Paradela, F., Pinto, F., Gulyurtlu, I., Cabrita, I., & Lapa, N. (2008) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-008-0176-1 · Cited by 171
A comparative study on co-pyrolysis of lignocellulosic biomass with polyethylene terephthalate, polystyrene, and polyvinyl chloride: Synergistic effects and product characteristics
Özsin, G., & Pütün, A. E. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.09.134 · Cited by 171
An investigation into the catalytic cracking of LDPE using Py–GC/MS
Serrano, D. P., Aguado, J., Escola, J. M., Rodríguez, J., & Miguel, G. S. (2005) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2004.11.026 · Cited by 166
Synergistic effect on thermal behavior and char morphology analysis during co-pyrolysis of paulownia wood blended with different plastics waste
Chen, L., Wang, S., Meng, H., Wu, Z., & Zhao, J. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.09.155 · Cited by 159
Catalytic pyrolysis of black-liquor lignin by co-feeding with different plastics in a fluidized bed reactor
Zhang, H., Xiao, R., Nie, J., Jin, B., Shao, S., & Xiao, G. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2015.05.040 · Cited by 158
Acceleration of cellulose co-pyrolysis with polymer
Matsuzawa, Y., Ayabe, M., & Nishino, J. (2001) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(00)00195-6 · Cited by 156
Study of synergistic effects during co-pyrolysis of cellulose and high-density polyethylene at various ratios
Yuan, H., Fan, H., Shan, R., He, M., Gu, J., & Chen, Y. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.12.038 · Cited by 154
Catalytic co-pyrolysis of torrefied yellow poplar and high-density polyethylene using microporous HZSM-5 and mesoporous Al-MCM-41 catalysts
Kim, Y., Jae, J., Kim, B., Hong, Y., Jung, S., & Park, Y. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.04.033 · Cited by 152
Co-pyrolysis of biomass and plastic waste over zeolite- and sodium-based catalysts for enhanced yields of hydrocarbon products
Ghorbannezhad, P., Park, S., & Onwudili, J. A. (2019) · Waste Management · doi:10.1016/j.wasman.2019.12.006 · Cited by 149
Kinetic studies of co-pyrolysis of rubber seed shell with high density polyethylene
Chin, B. L. F., Yusup, S. B., Shoaibi, A. A., et al. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.07.043 · Cited by 148
Thermal Decomposition Processes in Aromatic Polycarbonates Investigated by Mass Spectrometry
Puglisi, C., Sturiale, L., & Montaudo, G. (1999) · Macromolecules · doi:10.1021/ma981238z · Cited by 147
Characteristics and kinetics study of simultaneous pyrolysis of microalgae Chlorella vulgaris, wood and polypropylene through TGA
Azizi, K., Moraveji, M. K., & Najafabadi, H. A. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.06.155 · Cited by 146
Synergistic effects of co-pyrolysis of macroalgae and polyvinyl chloride on bio-oil/bio-char properties and transferring regularity of chlorine
Cao, B., Sun, Y., Guo, J., Wang, S., Yuan, J., Esakkimuthu, S., Uzoejinwa, B. B., Yuan, C., Abomohra, A., Qian, L., et al. (2019) · Fuel · doi:10.1016/j.fuel.2019.02.037 · Cited by 145
Efficient removal of elemental mercury by magnetic chlorinated biochars derived from co-pyrolysis of Fe(NO3)3-laden wood and polyvinyl chloride waste
Xu, Y., Luo, G., He, S., Deng, F., Pang, Q., Xu, Y., & Yao, H. (2018) · Fuel · doi:10.1016/j.fuel.2018.11.102 · Cited by 144
Synthesis and characterization of sulfonated activated carbon as a catalyst for bio-jet fuel production from biomass and waste plastics
Mateo, W., Lei, H., Villota, E. M., Qian, M., Zhao, Y., Huo, E., Zhang, Q., Lin, X., Wang, C., & Huang, Z. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2019.122411 · Cited by 142
Benzoic acid recovery via waste poly(ethylene terephthalate) (PET) catalytic pyrolysis using sulphated zirconia catalyst
Diaz-Silvarrey, L. S., McMahon, A. P., & Phan, A. N. (2018) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2018.08.014 · Cited by 136
Thermo-catalytic pyrolysis of biomass and plastic mixtures using HZSM-5
Sebestyén, Z., Barta-Rajnai, E., Bozi, J., Blazsó, M., Jakab, E., Miskolczi, N., Sója, J., & Czégény, Z. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.06.032 · Cited by 133
Fast microwave-assisted ex-catalytic co-pyrolysis of bamboo and polypropylene for bio-oil production
Zhao, Y., Wang, Y., Duan, D., Ruan, R. R., Fan, L., Zhou, Y., Dai, L., Lv, J., & Liu, Y. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.09.184 · Cited by 133
Ex-situ catalytic co-pyrolysis of lignin and polypropylene to upgrade bio-oil quality by microwave heating
Duan, D., Wang, Y., Dai, L., Ruan, R. R., Zhao, Y., Fan, L., Tayier, M., & Liu, Y. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.04.104 · Cited by 131
Pyrolysis of typical MSW components by Py-GC/MS and TG-FTIR
Ma, W., Rajput, G., Pan, M., Lin, F., Zhong, L., & Chen, G. (2019) · Fuel · doi:10.1016/j.fuel.2019.04.069 · Cited by 131
Pyrolysis and combustion of municipal solid wastes: Evaluation of synergistic effects using TGA-MS
Gunasee, S. D., Carrier, M., Görgens, J. F., & Mohee, R. (2016) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2016.07.001 · Cited by 129
Syngas production from co-pyrolysis and co-gasification of polystyrene and paper with CO2
Déparrois, N., Singh, P., Burra, K. R. G., & Gupta, A. K. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.04.013 · Cited by 129
Self-citation
TG/FT–IR/MS study on thermal decomposition of polypropylene/biomass composites
(2014) · doi:10.1016/j.polymdegradstab.2014.06.001 · Cited by 124
Novel Ni–Mg–Al–Ca catalyst for enhanced hydrogen production for the pyrolysis–gasification of a biomass/plastic mixture
Kumagai, S., Álvarez, J., Blanco, P. H., Wu, C., Yoshioka, T., Olazar, M., & Williams, P. T. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.09.012 · Cited by 124
Use of plastic waste as a fuel in the co-pyrolysis of biomass. Part I: The effect of the addition of plastic waste on the process and products
Sajdak, M., & Muzyka, R. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.03.011 · Cited by 123
Co-pyrogasification of Plastics and Biomass, a Review
Block, C., Ephraim, A., Weiss-Hortala, E., Minh, D. P., Nzihou, A., & Vandecasteele, C. (2018) · Waste and Biomass Valorization · doi:10.1007/s12649-018-0219-8 · Cited by 123
Pinniped entanglement in oceanic plastic pollution: A global review.
Jepsen, E. M., & de Bruyn, P. D. (2019) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2019.05.042 · Cited by 123
In-situ and ex-situ catalytic pyrolysis/co-pyrolysis of empty fruit bunches using mesostructured aluminosilicate catalysts
Shafaghat, H., Lee, H. W., Tsang, Y. F., Oh, D., Jae, J., Jung, S., Ko, C. H., Lam, S. S., & Park, Y. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.02.055 · Cited by 122
Influence of in-situ and ex-situ HZSM-5 catalyst on co-pyrolysis of corn stalk and polystyrene with a focus on liquid yield and quality
Muneer, B., Zeeshan, M., Qaisar, S., Razzaq, M., & Iftikhar, H. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.117762 · Cited by 120
A Comparison of the Use of Pyrolysis Oils in Diesel Engine
Wongkhorsub, C., & Chindaprasert, N. (2013) · Energy and Power Engineering · doi:10.4236/epe.2013.54b068 · Cited by 118
Catalytic co-pyrolysis of switchgrass and polyethylene over HZSM-5: Catalyst deactivation and coke formation
Mullen, C. A., Dorado, C., & Boateng, A. A. (2017) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2017.11.012 · Cited by 117
Co-pyrolysis of woody biomass and plastic waste in both analytical and pilot scale
Johansson, A., Sandström, L., Öhrman, O., & Jilvero, H. (2018) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2018.05.015 · Cited by 116
Effective deoxygenation for the production of liquid biofuels via microwave assisted co-pyrolysis of agro residues and waste plastics combined with catalytic upgradation
Suriapparao, D. V., Vinu, R., Shukla, A., & Haldar, S. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.122775 · Cited by 116
Co-pyrolysis of LDPE and cellulose: Synergies during devolatilization and condensation
Gunasee, S. D., Danon, B., Görgens, J. F., & Mohee, R. (2017) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2017.05.016 · Cited by 115
One-step pyrolysis of lignin and polyvinyl chloride for synthesis of porous carbon and its application for toluene sorption
Zhang, N., & Shen, Y. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2019.03.149 · Cited by 114
Production high yields of aromatic hydrocarbons through catalytic fast pyrolysis of torrefied wood and polystyrene
Hassan, E. B., Elsayed, I., & Eseyin, A. E. (2016) · Fuel · doi:10.1016/j.fuel.2016.02.031 · Cited by 112
Investigating use of metal-modified HZSM-5 catalyst to upgrade liquid yield in co-pyrolysis of wheat straw and polystyrene
Razzaq, M., Zeeshan, M., Qaisar, S., Iftikhar, H., & Muneer, B. (2019) · Fuel · doi:10.1016/j.fuel.2019.116119 · Cited by 112
Thermogravimetric and calorimetric characteristics during co-pyrolysis of municipal solid waste components
Ansah, E., Wang, L., & Shahbazi, A. (2016) · Waste Management · doi:10.1016/j.wasman.2016.06.015 · Cited by 111
Kinetic study for the co-pyrolysis of lignocellulosic biomass and plastics using the distributed activation energy model
Navarro, M. V., López, J. M., Veses, A., Callén, M. S., & García, T. (2018) · Energy · doi:10.1016/j.energy.2018.09.133 · Cited by 110
Drop-in biofuels from the co-pyrolysis of grape seeds and polystyrene
Sanahuja‐Parejo, O., Veses, A., Navarro, M. V., López, J. M., Murillo, R., Callén, M. S., & García, T. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.10.183 · Cited by 110
Mixed-waste pyrolysis of biomass and plastics waste – A modelling approach to reduce energy usage
Oyedun, A. O., Gebreegziabher, T. G., Ng, D. K. S., & Hui, C. W. (2014) · Energy · doi:10.1016/j.energy.2014.05.063 · Cited by 109
Pyrolysis of mixed municipal solid waste: Characterisation, interaction effect and kinetic modelling using the thermogravimetric approach
Chhabra, V., Bhattacharya, S., & Shastri, Y. (2019) · Waste Management · doi:10.1016/j.wasman.2019.03.048 · Cited by 109
Products characterization study of a slow pyrolysis of biomass-plastic mixtures in a fixed-bed reactor
Çepelioğullar, Ö., & Pütün, A. E. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.10.002 · Cited by 107
Synergistic enhancement of product quality through fast co-pyrolysis of acid pretreated biomass and waste plastic
Xue, Y., & Bai, X. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.03.036 · Cited by 107
Co-pyrolysis of waste tire and pine bark for syngas and char production
Wang, Z., Burra, K. R. G., Zhang, M., Li, X., Policella, M., Lei, T., & Gupta, A. K. (2020) · Fuel · doi:10.1016/j.fuel.2020.117878 · Cited by 107
Self-citation
Synergistic effects of biomass and polyurethane co-pyrolysis on the yield, reactivity, and heating value of biochar at high temperatures
Wang, X., Ma, D., Jin, Q., Deng, S., Stančin, H., Tan, H., & Mikulčić, H. (2019) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.106127 · Cited by 104
Catalytic pyrolysis of lignin for the production of aromatic hydrocarbons: Effect of magnesium oxide catalyst
Ryu, H. W., Lee, H. W., Jae, J., & Park, Y.-K. (2019) · Energy · doi:10.1016/j.energy.2019.05.015 · Cited by 103
On deconvolution for understanding synergistic effects in co-pyrolysis of pinewood and polypropylene
Liu, X., Burra, K. R. G., Wang, Z., Li, J., Che, D., & Gupta, A. K. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.115811 · Cited by 103
Self-citation
Microwave pyrolysis of rice straw: Products, mechanism, and kinetics
Huang, Y., Chiueh, P.-T., Kuan, W., & Lo, S. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2013.05.093 · Cited by 102
Stepwise pyrolysis of mixed plastics and paper for separation of oxygenated and hydrocarbon condensates
Sophonrat, N., Sandström, L., Zaini, I. N., & Yang, W. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.08.006 · Cited by 101
Pyrolysis kinetics of olive residue/plastic mixtures by non-isothermal thermogravimetry
Aboulkas, A., harfi, K. E., bouadili, A. E., et al. (2009) · Fuel Processing Technology · doi:10.1016/j.fuproc.2009.01.016 · Cited by 100
Effects of alkali and alkaline earth metals on the co-pyrolysis of cellulose and high density polyethylene using TGA and Py-GC/MS
Lin, X., Kong, L., Cai, H., Zhang, Q., Bi, D., & Yi, W. (2019) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.03.015 · Cited by 100
Utilization and recycling of end of life plastics for sustainable and clean industrial processes including the iron and steel industry
Devasahayam, S., Raju, G. B., & Hussain, C. M. (2019) · Materials Science for Energy Technologies · doi:10.1016/j.mset.2019.08.002 · Cited by 100
Catalytic co-pyrolysis of sugarcane bagasse and waste high-density polyethylene over faujasite-type zeolite
Hassan, H., Lim, J., & Hameed, B. H. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2019.03.137 · Cited by 97
Co-pyrolysis of Karanja and Niger seeds with waste polystyrene to produce liquid fuel
Shadangi, K. P., & Mohanty, K. (2015) · Fuel · doi:10.1016/j.fuel.2015.03.017 · Cited by 96
Thermogravimetric characteristics and kinetic study of biomass co-pyrolysis with plastics
Chattopadhyay, J., Kim, C., Kim, R., & Pak, D. (2008) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-008-0171-6 · Cited by 95
Thermally stable phosphorus and nickel modified ZSM-5 zeolites for catalytic co-pyrolysis of biomass and plastics
Yao, W., Li, J., Feng, Y., Wang, W., Zhang, X., Chen, Q., Komarneni, S., & Wang, Y. (2015) · RSC Advances · doi:10.1039/c5ra02947c · Cited by 94
Comparative study on synergistic effects in co-pyrolysis of tobacco stalk with polymer wastes: Thermal behavior, gas formation, and kinetics
Chen, R., Zhang, J., Lun, L., Li, Q., & Zhang, Y. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2019.121970 · Cited by 94
Thermogravimetric characteristics of typical municipal solid waste fractions during co-pyrolysis
Zhou, H., Long, Y., Meng, A., et al. (2015) · Waste Management · doi:10.1016/j.wasman.2014.09.027 · Cited by 93
Optimizing the distribution of aromatic products from catalytic fast pyrolysis of cellulose by ZSM-5 modification with boron and co-feeding of low-density polyethylene
Zhou, G., Li, J., Yu, Y., Li, X., Wang, Y., Wang, W., & Komarneni, S. (2014) · Applied Catalysis A General · doi:10.1016/j.apcata.2014.09.009 · Cited by 92
Pyrolysis kinetics of walnut shell and waste polyolefins using thermogravimetric analysis
Uzun, B. B., & Yaman, E. (2016) · Journal of the Energy Institute · doi:10.1016/j.joei.2016.09.001 · Cited by 92
Improving hydrocarbon yield via catalytic fast co-pyrolysis of biomass and plastic over ceria and HZSM-5: An analytical pyrolyzer analysis
Ding, K., He, A., Zhong, D., Fan, L., Liu, S., Wang, Y., Liu, Y., Chen, P. L., Lei, H., & Ruan, R. R. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2018.07.108 · Cited by 92
Pyrolysis and gasification of typical components in wastes with macro-TGA
Meng, A., Chen, S., Long, Y., Zhou, H., Zhang, Y., & Li, Q. (2015) · Waste Management · doi:10.1016/j.wasman.2015.08.025 · Cited by 91
Interactions of beech wood–polyethylene mixtures during co-pyrolysis
Kumagai, S., Fujita, K., Kameda, T., & Yoshioka, T. (2016) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2016.08.012 · Cited by 91
Improvement of bio-crude oil properties via co-pyrolysis of pine sawdust and waste polystyrene foam
Nguyen, Q. V., Choi, Y. S., Choi, S. K., Jeong, Y., & Kwon, Y. S. (2019) · Journal of Environmental Management · doi:10.1016/j.jenvman.2019.02.039 · Cited by 91
Experimental evaluation of a diesel engine fuelled by pyrolysis oils produced from low-density polyethylene and ethylene–vinyl acetate plastics
Kalargaris, I., Tian, G., & Gu, S. (2017) · Fuel Processing Technology · doi:10.1016/j.fuproc.2017.03.014 · Cited by 90
Fast co-pyrolysis of waste newspaper with high-density polyethylene for high yields of alcohols and hydrocarbons
Chen, W., Shi, S., Chen, M., & Zhou, X. (2017) · Waste Management · doi:10.1016/j.wasman.2017.05.032 · Cited by 90
Co-pyrolysis of sugarcane bagasse and polystyrene with ex-situ catalytic bed of metal oxides/HZSM-5 with focus on liquid yield
Iftikhar, H., Zeeshan, M., Iqbal, S., et al. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2019.121647 · Cited by 89
An experimental study on bio-oil production from co-pyrolysis with potato skin and high-density polyethylene (HDPE)
Önal, E. P., Uzun, B. B., & Pütün, A. E. (2012) · Fuel Processing Technology · doi:10.1016/j.fuproc.2012.06.010 · Cited by 88
Study on the co-pyrolysis of high density polyethylene and potato blends using thermogravimetric analyzer and tubular furnace
Xiong, S., Zhuo, J., Zhou, H., Pang, R., & Yao, Q. (2015) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2015.02.020 · Cited by 87
Hydrocarbon rich bio-oil production, thermal behavior analysis and kinetic study of microwave-assisted co-pyrolysis of microwave-torrefied lignin with low density polyethylene
Bu, Q., Chen, K. L., Xie, W., Liu, Y., Cao, M., Kong, X., Chu, Q., & Mao, H. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2019.121860 · Cited by 87
Chlorine-Char composite synthesized by co-pyrolysis of biomass wastes and polyvinyl chloride for elemental mercury removal
Xu, Y., Zeng, X., Luo, G., Zhang, B., Xu, P., Xu, M., & Yao, H. (2016) · Fuel · doi:10.1016/j.fuel.2016.06.024 · Cited by 86
Catalytic fast pyrolysis of wood plastic composite over microporous zeolites
Park, Y., Jung, J. S., Jae, J., Hong, S. B., Watanabe, A., & Kim, Y. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.08.128 · Cited by 86
Interactions of three municipal solid waste components during co-pyrolysis
Zhou, H., Long, Y., Meng, A., Li, Q., & Zhang, Y. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.08.017 · Cited by 85
Experimental evaluation of waste plastic oil and its blends on a single cylinder diesel engine
Kumar, R., Mishra, M. K., Singh, S., et al. (2016) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-016-0950-7 · Cited by 85
Microwave-assisted co-pyrolysis of microwave torrefied biomass with waste plastics using ZSM-5 as a catalyst for high quality bio-oil
Bu, Q., Liu, Y., Liang, J., Morgan, H. M., Yan, L., Xu, F., & Mao, H. (2018) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2018.07.021 · Cited by 84
Fluidized-Bed Upgrading of Wood Pyrolysis Liquids and Related Compounds
Chen, N. Y., Walsh, D. E., & Koenig, L. (1988) · ACS symposium series · doi:10.1021/bk-1988-0376.ch024 · Cited by 82
Microwave-assisted fast co-pyrolysis behaviors and products between microalgae and polyvinyl chloride
Dai, M., Xu, H., Yu, Z., Fang, S., Chen, L., Gu, W., & Ma, X. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.02.102 · Cited by 82
Catalytic pyrolysis of biomass-plastic wastes in the presence of MgO and MgCO3 for hydrocarbon-rich oils production
Yuan, R., & Shen, Y. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2019.122076 · Cited by 82
Catalytic co-pyrolysis of yellow poplar wood and polyethylene terephthalate over two stage calcium oxide-ZSM-5
Park, Y.-K., Jung, J., Ryu, S., Lee, H. W., Siddiqui, M. Z., Jae, J., Watanabe, A., & Kim, Y.-M. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.05.088 · Cited by 81
Interactions of municipal solid waste components during pyrolysis: A TG-FTIR study
Zhou, H., Meng, A., Long, Y., Li, Q., & Zhang, Y. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.05.024 · Cited by 80
Polymer/biomass-derived biochar for use as a sorbent and electron transfer mediator in environmental applications
Oh, S., & Seo, Y. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2016.06.073 · Cited by 80
Production of aromatic hydrocarbons via catalytic co-pyrolysis of torrefied cellulose and polypropylene
Lee, H. W., Kim, Y., Jae, J., Jeon, J., Jung, S., Kim, S. C., & Park, Y. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.10.001 · Cited by 79
Thermal Stability of Aluminum-Rich ZSM-5 Zeolites and Consequences on Aromatization Reactions
Hoff, T. C., Thilakaratne, R., Gardner, D. W., Brown, R. C., & Tessonnier, J. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b04671 · Cited by 78
HCl emission during co-pyrolysis of demolition wood with a small amount of PVC film and the effect of wood constituents on HCl emission reduction
Kuramochi, H., Nakajima, D., GOTO, S., SUGITA, K., Wu, W., & Kawamoto, K. (2008) · Fuel · doi:10.1016/j.fuel.2008.03.021 · Cited by 77
Catalytic fast co-pyrolysis of bamboo sawdust and waste plastics for enhanced aromatic hydrocarbons production using synthesized CeO2/γ-Al2O3 and HZSM-5
Wang, J., Jiang, J., Zhong, Z., Wang, K., Wang, X., Zhang, B., Ruan, R. R., Li, M., & Ragauskas, A. J. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.06.009 · Cited by 77
Co-pyrolysis of LignoBoost® lignin with synthetic polymers
Brebu, M. A., & Spiridon, I. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.08.024 · Cited by 76
Principles and Development of Lignocellulosic Biomass Pretreatment for Biofuels
Zheng, Y., Shi, J., Tu, M., & Cheng, Y. (2017) · Advances in bioenergy · doi:10.1016/bs.aibe.2017.03.001 · Cited by 75
Evaluation of char fuel ratio in municipal pyrolysis waste
Matsuzawa, Y., Ayabe, M., Nishino, J., Kubota, N., & 茂木, 幹. (2004) · Fuel · doi:10.1016/j.fuel.2004.02.006 · Cited by 74
Optimization of a biomass briquette fuel system based on grey relational analysis and analytic hierarchy process: A study using cornstalks in China
Wang, Z., Lei, T., Xia, C., Shi, X., Xiao, J., Li, Z., He, X., Zhu, J., & Yang, S.-H. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.04.079 · Cited by 72
Self-citation
Analysis of thermal degradation kinetics and carbon structure changes of co-pyrolysis between macadamia nut shell and PET using thermogravimetric analysis and 13C solid state nuclear magnetic resonance
Ko, K.-H., Rawal, A., & Sahajwalla, V. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.04.060 · Cited by 72
Comparative studies on catalytic and non-catalytic co-gasification of rubber seed shell and high density polyethylene mixtures
Chin, B. L. F., Yusup, S. B., Shoaibi, A. A., Kannan, P., Srinivasakannan, C., & Sulaıman, S. A. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.02.039 · Cited by 71
Thermal – Catalytic cracking of real MSW into Bio-Crude Oil
Gandidi, I. M., Susila, M. D., Mustofa, A., et al. (2016) · Journal of the Energy Institute · doi:10.1016/j.joei.2016.11.005 · Cited by 70
Co-pyrolysis of xylan and high-density polyethylene: Product distribution and synergistic effects
Gu, J., Fan, H., Wang, Y., Zhang, Y., Yuan, H., & Chen, Y. (2020) · Fuel · doi:10.1016/j.fuel.2019.116896 · Cited by 70
Experimental characterisation of a diesel engine running on polypropylene oils produced at different pyrolysis temperatures
Kalargaris, I., Tian, G., & Gu, S. (2017) · Fuel · doi:10.1016/j.fuel.2017.09.101 · Cited by 69
Field biomass as global energy source
Hakala, K., Kontturi, M., & Pahkala, K. (2009) · Agricultural and Food Science · doi:10.23986/afsci.5950 · Cited by 67
Study on the effect of metal types in (Me)-Al-MCM-41 on the mesoporous structure and catalytic behavior during the vapor-catalyzed co-pyrolysis of pubescens and LDPE
Liu, W.-W., Hu, C., Yu, Y., Tong, D., Zhu, L., Zhang, R.-N., & Zhao, B. (2012) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2012.09.002 · Cited by 66
Impact of plastic blends on the product yield from co-pyrolysis of lignin-rich materials
Sajdak, M. (2017) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2017.03.002 · Cited by 64
Catalytic co-pyrolysis of biomass carbohydrates with LLDPE over Al-SBA-15 and mesoporous ZSM-5
Kim, Y., Lee, H. W., Jae, J., Jung, K. B., Jung, S., Watanabe, A., & Park, Y. (2017) · Catalysis Today · doi:10.1016/j.cattod.2017.06.006 · Cited by 64
Pyrolysis of olive residue/low density polyethylene mixture: Part I Thermogravimetric kinetics
Aboulkas, A., harfi, K. E., & BOUADILI, A. E. (2008) · Journal of Fuel Chemistry and Technology · doi:10.1016/s1872-5813(09)60003-7 · Cited by 62
Production of liquid hydrocarbons from rice crop wastes mixtures by co-pyrolysis and co-hydropyrolysis
Pinto, F., Miranda, M., & Costa, P. (2016) · Fuel · doi:10.1016/j.fuel.2016.01.075 · Cited by 62
Catalytic cracking of tar derived from the pyrolysis of municipal solid waste fractions over biochar
Lu, P., Huang, Q., Chi, Y., et al. (2018) · Proceedings of the Combustion Institute · doi:10.1016/j.proci.2018.06.051 · Cited by 62
Thermal behavior and kinetics of co-pyrolysis of cellulose and polyethylene with the addition of transition metals
Wang, Z., Shen, D., Wu, C., & Gu, S. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.07.010 · Cited by 62
Self-citation
Co-pyrolysis of waste polypropylene and rice bran wax‒ production of biofuel and its characterization
Akancha, Kumari, N., & Singh, R. K. (2018) · Journal of the Energy Institute · doi:10.1016/j.joei.2018.07.011 · Cited by 61
Two-step catalytic co-pyrolysis of walnut shell and LDPE for aromatic-rich oil
Yu, D., Hui, H., & Li, S. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.111816 · Cited by 61

Flagged first, then by citations

Research works printed but not linked: 4

2019, Assessing trends in material generation, recycling, composting, combustion with energy recovery and landfilling in the United States, Adv Sustain Mater Manag
2018, Assessing trends in material generation, recycling, composting, combustion with energy recovery and landfilling in the United States, Adv Sustain Mater Manag
2019, PlasticsEurope-association of plastics manufactures. An analysis of European plastics production, demand and waste data, Plastics
Hariram, 2015, Combustion characteristics of waste pyrolytic plastic oil at full load operation in a direct injection compression ignition engine, J Chem Pharm Res, 7

Sorted by citations

Expanding plastics recycling technologies: chemical aspects, technology status and challenges
Li, H., Aguirre-Villegas, H. A., Allen, R. D., Bai, X., Benson, C. H., Beckham, G. T., Bradshaw, S. L., Brown, J. L., Brown, R. C., Cecon, V. S., et al. (2022) · Green Chemistry · doi:10.1039/d2gc02588d · Cited by 616
Review on synergistic effects during co-pyrolysis of biomass and plastic waste: Significance of operating conditions and interaction mechanism
Engamba Esso, S. B., Xiong, Z., Chaiwat, W., Kamara, M. F., Longfei, X., Xu, J., Ebako, J., Jiang, L., Su, S., Hu, S., et al. (2022) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2022.106415 · Cited by 254
Transforming Plastic Waste into Porous Carbon for Capturing Carbon Dioxide: A Review
Hussin, F., Aroua, M. K., Kassim, M. A., & Md. Ali, U. F. (2021) · Energies · doi:10.3390/en14248421 · Cited by 84
Sustainable management of plastic wastes in COVID-19 pandemic: The biochar solution
Igalavithana, A. D., Yuan, X., Attanayake, C. P., Wang, S., You, S., Tsang, D. C. W., Nzihou, A., & Ok, Y. S. (2022) · Environmental Research · doi:10.1016/j.envres.2022.113495 · Cited by 60
Synergistic effects during co-pyrolysis of milled wood lignin and polyolefins at the gas phase and liquid/solid phase contacting modes
Ma, C., Xie, S., Kumagai, S., Takahashi, Y., Saito, Y., Kameda, T., & Yoshioka, T. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.134030 · Cited by 42

See all 634

Authors: Wang, Z., Burra, K. G., Lei, T., & Gupta, A. K.
Affiliations: Henan University of Technology (CN)
Changzhou University (CN)
University of Maryland, College Park (US)
Corresponding author: Gupta, Ashwani K.
ORCID: Wang, Zhiwei
Gupta, Ashwani K.
Venue: Progress in Energy and Combustion Science
Publisher: Elsevier BV
Published: 2021-05
Volume: 84
Pages: 100899
ISSN: 0360-1285 (ISSN-L)
DOI: 10.1016/j.pecs.2020.100899
OpenAlex: W3118671078
Semantic Scholar: 52b75e1d00a82e33889e7ad711ce4c2cc5b95fd5
Cited by: 634
References: 249
Citations by year: 2026: 96 · 2025: 118 · 2024: 129 · 2023: 129 · 2022: 116 · 2021: 46
FWCI: 31.76
Type: journal article
Language: en
Open access: bronze
doi.org
Licence: www.elsevier.com/tdm/userlicense/1.0/ (tdm)
www.elsevier.com/legal/tdmrep-license (tdm)
www.elsevier.com/open-access/userlicense/1.0/ (am, 246 d)
Locations: Progress in Energy and Combustion Science (acceptedVersion)
Funders: Office of Naval Research
Topics: Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
Physical Sciences › Materials Science › Materials Chemistry › Thermal and Kinetic Analysis
Physical Sciences › Environmental Science › Waste Management and Disposal › Municipal Solid Waste Management
Keywords: co-pyrolysis, plastic waste, solid biomass, biofuels, value-added chemicals, polyethylene terephthalate, polyethylene, polyvinyl chloride, polypropylene, polystyrene, catalytic co-pyrolysis, ZSM-5 catalyst, transition metal catalysts, pyrolysis gas composition, solid residue, waste management, H/C ratio

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Co-pyrolysis of waste plastic and solid biomass for synergistic production of biofuels and chemicals-A review

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cites

Cited by

Related

Metadata

Record

About these checks