The DOI matches its Crossref record; 517 of the 517 references it cites were found in a registry or an index.
Progress in CFD Simulations of Fluidized Beds for Chemical and Energy Process Engineering
Open accessAbstract
Gas-solid fluidized beds have drawn the attention of engineers and researchers as an effective technology for a large variety of applications, and numerical simulations can play an increasingly relevant role in their development and optimization. Although real-time simulations will require substantial progress in the accuracy, capability, and efficiency of numerical models, future developments could herald a new era of so-called virtual reality for process engineering, featuring interactive simulations instead of stepwise experimental scale-up studies and cost-intensive empirical trial-and-error methods. This review paper provides a significant body of knowledge on the developments of CFD mathematical models and how they can be applied in various fluidized-bed systems. The review is divided into three main parts. The first part (Mathematical modeling) describes the state-of-the-art numerical models of gas-solid flows (two-fluid model, soft-sphere model, hard-sphere model, and hybrid model) and their fundamental assumptions (gas-solid, particle-particle, and particle-wall interactions). Special attention is devoted to the forces and the moments of the forces acting on particles, the parcel modeling, the homogeneous and structure-dependent drag models, the non-spherical particle models, the heat and mass transfer, and the turbulence. The second part of this review (State-of-the-art studies) is dedicated to the body of literature, focusing on how these numerical models are applied to fluidized-bed systems used in chemical and energy process engineering. Relevant works on simulation in the literature up to 2021 are analyzed, complemented by an overview of popularly used commercial and in-house simulation codes. Particular attention is paid to those studies that include measurement validation, to achieve a fundamentally competitive comparison between the different numerical models. The pros and cons of applying CFD models to fluidized-bed systems are studied and assessed based on the existing body of literature. The third part of this review (Conclusion and prospects) highlights current research trends, identifying research gaps and opportunities for future ways, in which CFD can be applied to fluidized beds for energetic and chemical processes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–400 of 517
Arastoopour, H. (2001) · Powder Technology · doi:10.1016/s0032-5910(00)00417-4 · Cited by 155
Modelling of micro-particle agglomeration in turbulent flows
Ho, C. A., & Sommerfeld, M. (2002) · Chemical Engineering Science · doi:10.1016/s0009-2509(02)00172-0 · Cited by 153
Thunman, H., Lind, F., Breitholtz, C., Berguerand, N., & Seemann, M. C. (2013) · Fuel · doi:10.1016/j.fuel.2013.05.073 · Cited by 152
Blondeau, J., & Jeanmart, H. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2012.02.016 · Cited by 152
CFD modelling of the fast pyrolysis of biomass in fluidised bed reactors. Part B
Papadikis, K., Gu, S., & Bridgwater, A. V. (2008) · Chemical Engineering Science · doi:10.1016/j.ces.2008.11.007 · Cited by 151
Modeling of dense gas–solid reactive mixtures applied to biomass pyrolysis in a fluidized bed
Lathouwers, D., & Bellan, J. (2001) · International Journal of Multiphase Flow · doi:10.1016/s0301-9322(01)00059-3 · Cited by 148
A new computational method for studying heat transfer in fluid bed reactors
Zhou, Z., Yu, A., & Zulli, P. (2009) · Powder Technology · doi:10.1016/j.powtec.2009.09.002 · Cited by 147
Numerical simulation of liquid transfer between particles
Shi, D., & McCarthy, J. J. (2007) · Powder Technology · doi:10.1016/j.powtec.2007.08.011 · Cited by 146
Cracking reactions of tar from pyrolysis of spruce wood
Rath, J., & Staudinger, G. (2001) · Fuel · doi:10.1016/s0016-2361(01)00016-3 · Cited by 146
Large‐scale discrete element modeling in a fluidized bed
Sakai, M., Yamada, Y., Shigeto, Y., Shibata, K., Kawasaki, V. M., & Koshizuka, S. (2010) · International Journal for Numerical Methods in Fluids · doi:10.1002/fld.2364 · Cited by 146
Fragmentation and restructuring of soft-agglomerates under shear
Eggersdorfer, M. L., Kadau, D., Herrmann, H. J., & Pratsinis, S. E. (2009) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2009.10.062 · Cited by 145
Lu, B., Wang, W., & Li, J. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2011.06.026 · Cited by 145
Assessment of drag models in simulating bubbling fluidized bed hydrodynamics
Loha, C., Chattopadhyay, H., & Chatterjee, P. K. (2012) · Chemical Engineering Science · doi:10.1016/j.ces.2012.03.044 · Cited by 145
Gas-particle interactions in dense gas-fluidized beds
Li, J., & Kuipers, J. A. M. (2003) · Chemical Engineering Science · doi:10.1016/s0009-2509(02)00599-7 · Cited by 144
Rhodes, M. J., Wang, X., Nguyen, M. N., et al. (2001) · Chemical Engineering Science · doi:10.1016/s0009-2509(00)00427-9 · Cited by 144
CFD-DEM simulation of fluidization of rod-like particles in a fluidized bed
Ma, H., Xu, L., & Zhao, Y. (2016) · Powder Technology · doi:10.1016/j.powtec.2016.12.008 · Cited by 143
Danowitz, A., Kelley, K., Mao, J., Stevenson, J. P., & Horowitz, M. (2012) · Communications of the ACM · doi:10.1145/2133806.2133822 · Cited by 142
The particle-in-cell method for numerical solution of problems in fluid dynamics
Harlow, F. H. (1962) · doi:10.2172/4769185 · Cited by 141
Wang, S., Luo, K., Hu, C., Sun, L., & Fan, J. (2018) · Powder Technology · doi:10.1016/j.powtec.2018.04.027 · Cited by 141
Biomass combustion in a CLC system using an iron ore as an oxygen carrier
Mendiara, T., Abad, A., de Diego, L. F., Garcı́a-Labiano, F., Gayán, P., & Adánez, J. (2013) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2013.09.012 · Cited by 140
A thermodynamical formulation for dispersed multiphase turbulent flows—1
Ahmadi, G., & Ma, D. (1990) · International Journal of Multiphase Flow · doi:10.1016/0301-9322(90)90062-n · Cited by 139
Mellin, P., Kantarelis, E., & Yang, W. (2013) · Fuel · doi:10.1016/j.fuel.2013.09.009 · Cited by 138
A Review of Eulerian Simulation of Geldart A Particles in Gas-Fluidized Beds
Wang, J. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie900247t · Cited by 138
Wang, S., & Shen, Y. (2020) · Renewable Energy · doi:10.1016/j.renene.2020.06.001 · Cited by 138
Computational study of heat transfer in a bubbling fluidized bed with a horizontal tube
Hou, Q., Zhou, Z., & Yu, A. (2011) · AIChE Journal · doi:10.1002/aic.12700 · Cited by 136
Evaluating the effect of potassium on cellulose pyrolysis reaction kinetics
Trendewicz, A., Evans, R. J., Dutta, A., Sykes, R. W., Carpenter, D. L., & Braun, R. J. (2015) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2015.01.001 · Cited by 134
Papadikis, K., Gu, S., & Bridgwater, A. V. (2009) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.01.036 · Cited by 134
Electrostatics in gas-solid fluidized beds: A review
Fotovat, F., Bi, X. T., & Grace, J. R. (2017) · Chemical Engineering Science · doi:10.1016/j.ces.2017.08.001 · Cited by 134
Zhou, H., Flamant, G., & Daniel, G. (2004) · Chemical Engineering Science · doi:10.1016/j.ces.2004.01.069 · Cited by 133
Numerical investigation of a coarse-grain discrete element method in solid mixing in a spouted bed
Takabatake, K., Mori, Y., Khinast, J., & Sakai, M. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.04.015 · Cited by 132
Three-dimensional full-loop simulation of a dual fluidized-bed biomass gasifier
Liu, H., Cattolica, R. J., Seiser, R., et al. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.09.065 · Cited by 130
Euler–Lagrange/DEM simulation of wood gasification in a bubbling fluidized bed reactor
Oevermann, M., Gerber, S., & Behrendt, F. (2009) · Particuology · doi:10.1016/j.partic.2009.04.004 · Cited by 129
Semi-resolved CFD–DEM for thermal particulate flows with applications to fluidized beds
Wang, Z., & Liu, M. (2020) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.120150 · Cited by 128
CFD–DEM model for coupled heat and mass transfer in a spout fluidized bed with liquid injection
Sutkar, V. S., Deen, N. G., Patil, A. V., Salikov, V., Antonyuk, S. I., Heinrich, S., & Kuipers, J. A. M. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.11.044 · Cited by 127
Kolbitsch, P., Bolhàr‐Nordenkampf, J., Pröll, T., & Hofbauer, H. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie900123v · Cited by 126
Zhou, H., Flamant, G., & Daniel, G. (2004) · Chemical Engineering Science · doi:10.1016/j.ces.2004.01.070 · Cited by 126
Computational fluid dynamics for dense gas–solid fluidized beds: a multi-scale modeling strategy
van der Hoef, M. A., Annaland, M. V. S., & Kuipers, J. A. M. (2004) · Chemical Engineering Science · doi:10.1016/j.ces.2004.07.013 · Cited by 126
Large-scale DNS of gas–solid flows on Mole-8.5
Xiong, Q., Li, B., Zhou, G., Fang, X., Xu, J., Wang, J., He, X., Wang, X., Wang, L., Ge, W., et al. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2011.10.059 · Cited by 126
Physico-chemical processes occurring inside a degrading two-dimensional anisotropic porous medium
Blasi, C. D. (1998) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(98)00142-2 · Cited by 125
Wang, S., Luo, K., Hu, C., & Fan, J. (2017) · Chemical Engineering Science · doi:10.1016/j.ces.2017.05.052 · Cited by 124
Numerical simulation of biomass fast pyrolysis in an auger reactor
Aramideh, S., Xiong, Q., Kong, S., & Brown, R. C. (2015) · Fuel · doi:10.1016/j.fuel.2015.04.038 · Cited by 123
Coalescence of drops in a turbulent flow field
Howarth, W. J. (1964) · Chemical Engineering Science · doi:10.1016/0009-2509(64)85003-x · Cited by 122
Simulation on gasification of forestry residues in fluidized beds by Eulerian–Lagrangian approach
Xie, J., Zhong, W., Jin, B., Shao, Y., & Liu, H. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.06.080 · Cited by 121
Effect of Large Aspect Ratio of Biomass Particles on Carbon Burnout in a Utility Boiler
Gera, D., Mathur, M. P., Freeman, M. C., & Robinson, A. L. (2002) · Energy & Fuels · doi:10.1021/ef0200931 · Cited by 120
High temperature behaviour of a CuO/γAl2O3 oxygen carrier for chemical-looping combustion
Forero, C. R., Gayán, P., Garcı́a-Labiano, F., de Diego, L. F., Abad, A., & Adánez, J. (2011) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2011.03.005 · Cited by 120
Voronoi tessellation of the packing of fine uniform spheres
Yang, R., Zou, R., & Yu, A. (2002) · Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics · doi:10.1103/physreve.65.041302 · Cited by 119
Overview of carbon capture and storage
Rackley, S. A. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-812041-5.00002-7 · Cited by 118
Estimation of Numerical Errors Related to Some Basic Assumptions in Discrete Particle Methods
Benyahia, S., & Galvin, J. E. (2010) · Industrial & Engineering Chemistry Research · doi:10.1021/ie100662z · Cited by 117
Xiong, Q., Aramideh, S., & Kong, S. (2013) · Energy & Fuels · doi:10.1021/ef4012966 · Cited by 117
Papadikis, K., Bridgwater, A. V., & Gu, S. (2008) · Chemical Engineering Science · doi:10.1016/j.ces.2008.05.045 · Cited by 116
Parametric study of fine particle fluidization under mechanical vibration
Xu, C. C., & Zhu, J. (2005) · Powder Technology · doi:10.1016/j.powtec.2005.10.002 · Cited by 116
Link, J. M., Zeilstra, C., Deen, N. G., & Kuipers, J. A. M. (2004) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.5450820105 · Cited by 116
A new predictive model for fragmenting and non-fragmenting binary droplet collisions
Munnannur, A., & Reitz, R. D. (2007) · International Journal of Multiphase Flow · doi:10.1016/j.ijmultiphaseflow.2007.03.003 · Cited by 115
Advances in mathematical modeling of fluidized bed gasification
Loha, C., Gu, S., Wilde, J. D., Mahanta, P., & Chatterjee, P. K. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.07.199 · Cited by 114
CFD–DEM simulation of gas–solid reacting flows in fluid catalytic cracking (FCC) process
Wu, C., Cheng, Y., Ding, Y., & Jin, Y. (2009) · Chemical Engineering Science · doi:10.1016/j.ces.2009.06.026 · Cited by 113
Parallel LES-DEM simulation of dense flows in fluidized beds
Wang, S., Luo, K., Yang, S., Hu, C., & Fan, J. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.07.161 · Cited by 112
Particle scale study of heat transfer in packed and fluidized beds of ellipsoidal particles
Gan, J., Zhou, Z., & Yu, A. (2016) · Chemical Engineering Science · doi:10.1016/j.ces.2016.01.041 · Cited by 111
Lu, L., Xu, J., Ge, W., Gao, G., Jiang, Y., Zhao, M., Liu, X., & Li, J. (2016) · Chemical Engineering Science · doi:10.1016/j.ces.2016.08.013 · Cited by 110
CFD-DEM simulation of raceway formation in an ironmaking blast furnace
Miao, Z., Zhou, Z., Yu, A., & Shen, Y. (2016) · Powder Technology · doi:10.1016/j.powtec.2016.11.039 · Cited by 110
Ghassemi, H., & Markadeh, R. S. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.12.007 · Cited by 109
Kinetic theory based computation of PSRI riser: Part I—Estimate of mass transfer coefficient
Chalermsinsuwan, B., Piumsomboon, P., & Gidaspow, D. (2008) · Chemical Engineering Science · doi:10.1016/j.ces.2008.11.010 · Cited by 109
Kinetic analysis and thermodynamics properties of air/steam gasification of agricultural waste
Fernandez, A., Rodriguez-Ortiz, L. A., Asensio, D., Rodríguez, R., & Mazza, G. (2020) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2020.103829 · Cited by 109
Comprehensive investigation and comparison of TFM, DenseDPM and CFD-DEM for dense fluidized beds
Ostermeier, P., DeYoung, S., Vandersickel, A., Gleis, S., & Spliethoff, H. (2018) · Chemical Engineering Science · doi:10.1016/j.ces.2018.11.007 · Cited by 108
Characterization and CFD-DEM modelling of a prismatic spouted bed
Salikov, V., Antonyuk, S. I., Heinrich, S., Sutkar, V. S., Deen, N. G., & Kuipers, J. A. M. (2014) · Powder Technology · doi:10.1016/j.powtec.2014.05.026 · Cited by 107
The formation of satellite droplets by unstable binary drop collisions
Brenn, G., Valkovska, D. S., & Danov, K. D. (2001) · Physics of Fluids · doi:10.1063/1.1384892 · Cited by 107
Zhong, H., Xiong, Q., Yin, L., Zhang, J., Zhu, Y., Liang, S., Niu, B., & Zhang, X. (2020) · Renewable Energy · doi:10.1016/j.renene.2020.01.057 · Cited by 107
Almohammed, N., Alobaid, F., Breuer, M., & Epple, B. (2014) · Powder Technology · doi:10.1016/j.powtec.2014.05.024 · Cited by 106
Self-citationA modified cohesion model for CFD–DEM simulations of fluidization
Gu, Y., Özel, A., & Sundaresan, S. (2015) · Powder Technology · doi:10.1016/j.powtec.2015.09.037 · Cited by 104
Three-dimensional discrete particle model for gas–solid fluidized beds on unstructured mesh
Wu, C. L., Berrouk, A. S., & Nandakumar, K. (2009) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.05.024 · Cited by 103
Modeling the thermochemical degradation of biomass inside a fast pyrolysis fluidized bed reactor
Bruchmüller, J., Wachem, B. G. M. V., Gu, S., Luo, K. H., & Brown, R. C. (2011) · AIChE Journal · doi:10.1002/aic.13705 · Cited by 102
Hong, K., Wang, W., Zhou, Q., Wang, J., & Li, J. (2012) · Chemical Engineering Science · doi:10.1016/j.ces.2012.03.022 · Cited by 101
CFD–DEM modeling of gas–solid flow and catalytic MTO reaction in a fluidized bed reactor
Zhuang, Y.-Q., Chen, X. D., Luo, Z., & Xiao, J. (2013) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2013.08.007 · Cited by 100
Modeling fast biomass pyrolysis in a gas–solid vortex reactor
Ashcraft, R. W., Heynderickx, G. J., & Marin, G. B. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.06.048 · Cited by 100
Multiphase Reacting Flows: Modelling and Simulation
Marchisio, D. L., & Fox, R. O. (2007) · Springer eBooks · doi:10.1007/978-3-211-72464-4 · Cited by 99
Particle and bubble movements around tubes immersed in fluidized beds – a numerical study
Rong, D., Mikami, T., & Horio, M. (1999) · Chemical Engineering Science · doi:10.1016/s0009-2509(99)00090-1 · Cited by 99
Agglomeration Processes: Phenomena, Technologies, Equipment
Pietsch, W. (2001) · Wiley eBooks · doi:10.1002/9783527619801 · Cited by 99
The dynamics of milk droplet–droplet collisions
Finotello, G., Kooiman, R. F., Padding, J. T., Buist, K. A., Jongsma, A., Innings, F., & Kuipers, J. A. M. (2017) · Experiments in Fluids · doi:10.1007/s00348-017-2471-2 · Cited by 98
Fully resolved simulation of a gas-fluidized bed: A critical test of DEM models
Kriebitzsch, S., van der Hoef, M. A., & Kuipers, J. A. M. (2012) · Chemical Engineering Science · doi:10.1016/j.ces.2012.12.038 · Cited by 97
Numerical study of bubble break-up in bubbly flows using a deterministic Euler–Lagrange framework
Lau, Y. M., Bai, W., Deen, N. G., & Kuipers, J. A. M. (2014) · Chemical Engineering Science · doi:10.1016/j.ces.2013.12.034 · Cited by 97
Zhou, Q., & Wang, J. (2014) · Chemical Engineering Science · doi:10.1016/j.ces.2014.10.025 · Cited by 96
Prediction of agglomerate sizes in bubbling fluidized beds of group C powders
Iwadate, Y., & Horio, M. (1998) · Powder Technology · doi:10.1016/s0032-5910(98)00143-0 · Cited by 96
Effect of particle shape and size on effective thermal conductivity of packed beds
Gan, J.-Q., Zhou, Z.-Y., & Yu, A. (2017) · Powder Technology · doi:10.1016/j.powtec.2017.01.024 · Cited by 95
Numerical simulation of metallic solid bridging particles in a fluidized bed at high temperature
Kuwagi, K., Mikami, T., & Horio, M. (2000) · Powder Technology · doi:10.1016/s0032-5910(99)00224-7 · Cited by 94
Modeling of droplet collision-induced breakup process
Ko, G. H., & Ryou, H. S. (2005) · International Journal of Multiphase Flow · doi:10.1016/j.ijmultiphaseflow.2005.02.004 · Cited by 94
Particle‐resolved direct numerical simulation of gas–solid dynamics in experimental fluidized beds
Luo, K., Tan, J., Wang, Z., & Fan, J. (2016) · AIChE Journal · doi:10.1002/aic.15186 · Cited by 93
Experimental studies of particle flow dynamics in a two-dimensional spouted bed
Liu, G.-Q., Li, S., Zhao, X., & Yao, Q. (2007) · Chemical Engineering Science · doi:10.1016/j.ces.2007.11.013 · Cited by 92
Effects of gas and droplet characteristics on drop-drop collision outcome regimes
Krishnan, K. G., & Loth, E. (2015) · International Journal of Multiphase Flow · doi:10.1016/j.ijmultiphaseflow.2015.08.003 · Cited by 91
Liu, H., Elkamel, A., Lohi, A., & Biglari, M. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie4024148 · Cited by 91
Modelling droplet collision outcomes for different substances and viscosities
Sommerfeld, M., & Kuschel, M. (2016) · Experiments in Fluids · doi:10.1007/s00348-016-2249-y · Cited by 91
Yield Optimization and Scaling of Fluidized Beds for Tar Production from Biomass
Lathouwers, D., & Bellan, J. (2001) · Energy & Fuels · doi:10.1021/ef010053h · Cited by 90
On random walk models for simulation of particle-laden turbulent flows
Mofakham, A. A., & Ahmadi, G. (2019) · International Journal of Multiphase Flow · doi:10.1016/j.ijmultiphaseflow.2019.103157 · Cited by 88
Herzog, N., Schreiber, M., Egbers, C., & Krautz, H. J. (2011) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2011.12.002 · Cited by 87
Coupling DAEM and CFD for simulating biomass fast pyrolysis in fluidized beds
Xiong, Q., Zhang, J., Xu, F., Wiggins, G. M., & Daw, C. S. (2015) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2015.11.015 · Cited by 87
Numerical simulation of chemical looping combustion process with CaSO4 oxygen carrier
Deng, Z., Xiao, R., Jin, B., & Song, Q. (2009) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2008.11.004 · Cited by 86
Kinetics and Mechanisms of the Two Opposing Reactions of the Equilibrium CO + H2O = CO2 + H21
Graven, W. M., & Long, F. J. (1954) · Journal of the American Chemical Society · doi:10.1021/ja01639a002 · Cited by 86
Ku, X., Jin, H., & Lin, J. (2017) · Chemical Engineering Science · doi:10.1016/j.ces.2017.04.050 · Cited by 86
Computational fluid dynamic simulations of chemical looping fuel reactors utilizing gaseous fuels
Mahalatkar, K., Kuhlman, J. M., Huckaby, E. D., & O'Brien, T. (2010) · Chemical Engineering Science · doi:10.1016/j.ces.2010.11.003 · Cited by 85
Papadikis, K., Gu, S., & Bridgwater, A. V. (2009) · Fuel Processing Technology · doi:10.1016/j.fuproc.2009.08.016 · Cited by 85
Chen, M., Kontomaris, K., & McLaughlin, J. B. (1999) · International Journal of Multiphase Flow · doi:10.1016/s0301-9322(98)00007-x · Cited by 84
Numerical and experimental analysis of municipal solid wastes gasification process
Couto, N. D., Silva, V. B. R. E., Monteiro, E., Teixeira, S., Chacartegui, R., Bouziane, K., Brito, P., & Rouboa, A. I. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.12.036 · Cited by 84
An extended DEM–CFD model for char combustion in a bubbling fluidized bed combustor of inert sand
Geng, Y., & Che, D. (2010) · Chemical Engineering Science · doi:10.1016/j.ces.2010.10.011 · Cited by 84
Assessment on steam gasification of municipal solid waste against biomass substrates
Couto, N. D., Silva, V. B. R. E., & Rouboa, A. I. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.06.077 · Cited by 84
Lu, L., Gopalan, B., & Benyahia, S. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b01862 · Cited by 84
Nonspherical particles in a pseudo‐2D fluidized bed: Experimental study
Mahajan, V. V., Padding, J. T., Nijssen, T. M. J., Buist, K. A., & Kuipers, J. A. M. (2018) · AIChE Journal · doi:10.1002/aic.16078 · Cited by 84
Xiong, Q., Xu, F., Ramirez, E., Pannala, S., & Daw, C. S. (2015) · Fuel · doi:10.1016/j.fuel.2015.09.074 · Cited by 83
CFD–DEM modeling of gas fluidization of fine ellipsoidal particles
Gan, J., Zhou, Z., & Yu, A. (2015) · AIChE Journal · doi:10.1002/aic.15050 · Cited by 83
Zhou, L. H., Zhang, L., Bai, L., et al. (2017) · RSC Advances · doi:10.1039/c6ra28615a · Cited by 82
Modeling effects of interphase transport coefficients on biomass pyrolysis in fluidized beds
Xiong, Q., & Kong, S.-C. (2014) · Powder Technology · doi:10.1016/j.powtec.2014.04.062 · Cited by 81
Solids mixing in the riser of a circulating fluidized bed
de Velden, M. V., Baeyens, J., & Smolders, K. (2007) · Chemical Engineering Science · doi:10.1016/j.ces.2006.12.069 · Cited by 81
Rotating fluidized beds in a static geometry: Experimental proof of concept
Wilde, J. D., & de Broqueville, A. (2007) · AIChE Journal · doi:10.1002/aic.11139 · Cited by 79
Chen, X., Luo, Z., Yan, W., Lu, Y., & Ng, I. (2011) · AIChE Journal · doi:10.1002/aic.12548 · Cited by 79
Qi, T., Lei, T., Yan, B., et al. (2019) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2019.01.146 · Cited by 79
Ranganathan, P., & Gu, S. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2016.02.042 · Cited by 78
Zhong, H., Xiong, Q., Zhu, Y., Liang, S., Zhang, J., Niu, B., & Zhang, X. (2019) · Renewable Energy · doi:10.1016/j.renene.2019.04.006 · Cited by 78
El‐Emam, M. A., Shi, W., & Zhou, L. H. (2019) · Advanced Powder Technology · doi:10.1016/j.apt.2019.08.015 · Cited by 78
CFD Modeling of Gas–Solid Cyclone Separators at Ambient and Elevated Temperatures
Nakhaei, M., Lu, B., Tian, Y., Wang, W., Dam‐Johansen, K., & Wu, H. (2020) · Processes · doi:10.3390/pr8020228 · Cited by 78
Hou, Q., Zhou, Z., & Yu, A. (2015) · Powder Technology · doi:10.1016/j.powtec.2015.03.028 · Cited by 77
Monitoring and control of coating and granulation processes in fluidized beds – A review
da Silva, C. A. M., Butzge, J. J., Nitz, M., & Taranto, O. P. (2013) · Advanced Powder Technology · doi:10.1016/j.apt.2013.04.008 · Cited by 77
Simulation of an aggregate dryer using coupled CFD and DEM methods
Hobbs, A. M. (2009) · International journal of computational fluid dynamics · doi:10.1080/10618560802680971 · Cited by 77
Energy Efficiency Indicators for Public Electricity Production from Fossil Fuels
International Energy Agency (2009) · OECD eBooks · doi:10.1787/9789264061996-en · Cited by 77
Yan, W., Luo, Z., Lu, Y., & Chen, X. D. (2011) · AIChE Journal · doi:10.1002/aic.12705 · Cited by 76
DEM/CFD modeling of the fuel conversion in a pellet stove
Wiese, J., Wissing, F., Höhner, D., Wirtz, S., Scherer, V., Ley, U., & Behr, H. M. (2016) · Fuel Processing Technology · doi:10.1016/j.fuproc.2016.06.005 · Cited by 76
Kinetic Model of Steam Gasification of Biomass in a Bubbling Fluidized Bed Reactor
Hejazi, B., Grace, J. R., Bi, X. T., & Mahecha‐Botero, A. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.6b03161 · Cited by 76
Application of XDEM as a novel approach to predict drying of a packed bed
Mahmoudi, A. H., Hoffmann, F., & Peters, B. J. (2013) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2013.07.016 · Cited by 75
Force balance modelling for agglomerating fluidization of cohesive particles
Zhou, T., & Li, H. (2000) · Powder Technology · doi:10.1016/s0032-5910(00)00241-2 · Cited by 74
Lv, X., Li, H., & Zhu, Q. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.09.067 · Cited by 74
Krause, B., Liedmann, B., Wiese, J., et al. (2017) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2017.03.017 · Cited by 74
Modeling and Performance Analysis of Biomass Fast Pyrolysis in a Solar-Thermal Reactor
Bashir, M. D., Yu, X., Hassan, M., & makkawi, Y. T. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b02806 · Cited by 74
Zhang, Y., Ran, Z., Jin, B., Zhang, Y., Zhou, C., & Sher, F. (2019) · International Journal of Chemical Reactor Engineering · doi:10.1515/ijcre-2019-0064 · Cited by 74
Modeling of binary droplet collisions for application to inter-impingement sprays
Kim, S., Lee, D., & Lee, C. S. (2009) · International Journal of Multiphase Flow · doi:10.1016/j.ijmultiphaseflow.2009.02.010 · Cited by 73
Modelling the breakup of solid aggregates in turbulent flows
Bäbler, M. U., Morbidelli, M., & Bałdyga, J. (2008) · Journal of Fluid Mechanics · doi:10.1017/s002211200800298x · Cited by 73
BIOTC: An open-source CFD code for simulating biomass fast pyrolysis
Xiong, Q., Aramideh, S., Passalacqua, A., & Kong, S. (2014) · Computer Physics Communications · doi:10.1016/j.cpc.2014.02.012 · Cited by 72
Assessment of the miscanthus gasification in a semi-industrial gasifier using a CFD model
Monteiro, E., Ismail, T. M., Ramos, A., El-Salam, M. A., Brito, P., & Rouboa, A. I. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.05.128 · Cited by 72
Lu, H., Shuyan, W., Zhao, Y., Liu, Y., Gidaspow, D., & Ding, J. (2005) · Chemical Engineering Science · doi:10.1016/j.ces.2005.01.010 · Cited by 70
Comparison of non-cohesive resolved and coarse grain DEM models for gas flow through particle beds
Hilton, J. E., & Cleary, P. W. (2014) · Applied Mathematical Modelling · doi:10.1016/j.apm.2014.02.013 · Cited by 70
Monteiro, E., Ismail, T. M., Ramos, A., El-Salam, M. A., Brito, P., & Rouboa, A. I. (2017) · Energy · doi:10.1016/j.energy.2017.10.100 · Cited by 69
The influence of binary drag laws on simulations of species segregation in gas-fluidized beds
Leboreiro, J., Joseph, G. G., Hrenya, C. M., et al. (2007) · Powder Technology · doi:10.1016/j.powtec.2007.08.015 · Cited by 68
Multi-fluid reactive modeling of fluidized bed pyrolysis process
Sharma, A., Wang, S., Pareek, V. K., Yang, H. S., & Zhang, D. (2014) · Chemical Engineering Science · doi:10.1016/j.ces.2014.11.019 · Cited by 68
Chaotic behavior of gas‐solids flow in the riser of a laboratory‐scale circulating fluidized bed
Marzocchella, A., Zijerveld, R. C., Schouten, J. C., & Bleek, C. M. V. D. (1997) · AIChE Journal · doi:10.1002/aic.690430609 · Cited by 68
Modeling agglomeration processes in fluid‐bed granulation
Cryer, S. A. (1999) · AIChE Journal · doi:10.1002/aic.690451005 · Cited by 68
Effect of Shear on the Strength of Polymer-Induced Flocs
Yeung, A., Gibbs, A., & Pelton, R. H. (1997) · Journal of Colloid and Interface Science · doi:10.1006/jcis.1997.5140 · Cited by 67
Ismail, T. M., Ramos, A., Monteiro, E., El-Salam, M. A., & Rouboa, A. I. (2019) · Renewable Energy · doi:10.1016/j.renene.2019.10.029 · Cited by 67
Diesel–diesel and diesel–ethanol drop collisions
Chen, R.-H. (2006) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2006.05.025 · Cited by 66
Onel, O., Niziolek, A. M., Hasan, M. M. F., & Floudas, C. A. (2014) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2014.03.008 · Cited by 66
Karimipour, S., & Pugsley, T. S. (2011) · Powder Technology · doi:10.1016/j.powtec.2011.09.026 · Cited by 66
Computational Study of the Effects of Material Properties on Heat Transfer in Gas Fluidization
Hou, Q., Zhou, Z., & Yu, A. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie3015999 · Cited by 66
Fast algorithms for the simulation of polygonal particles
Schinner, A. (1999) · Granular Matter · doi:10.1007/s100350050032 · Cited by 65
Boateng, A. A., & Mtui, P. L. (2011) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2011.09.034 · Cited by 65
EMMS-based Eulerian simulation on the hydrodynamics of a bubbling fluidized bed with FCC particles
Wang, J., & Liu, Y. (2009) · Powder Technology · doi:10.1016/j.powtec.2009.09.022 · Cited by 65
Zhao, L., & Lu, Y. (2017) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2017.07.022 · Cited by 65
Modeling of the filtered drag force in gas–solid flows via a deep learning approach
Zhang, Y., Jiang, M., Chen, X. D., Yu, Y., & Zhou, Q. (2020) · Chemical Engineering Science · doi:10.1016/j.ces.2020.115835 · Cited by 65
Banerjee, S., & Agarwal, R. K. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.10.013 · Cited by 64
Effect of drag models on CFD–DEM predictions of bubbling fluidized beds with Geldart D particles
Agrawal, V., Shinde, Y. H., Shah, M. T., et al. (2018) · Advanced Powder Technology · doi:10.1016/j.apt.2018.07.014 · Cited by 64
A computational fluid dynamics design of a carbon dioxide sorption circulating fluidized bed
Chalermsinsuwan, B., Piumsomboon, P., & Gidaspow, D. (2010) · AIChE Journal · doi:10.1002/aic.12213 · Cited by 63
Exact calculation of the overlap volume of spheres and mesh elements
Strobl, S., Formella, A., & Pöschel, T. (2016) · Journal of Computational Physics · doi:10.1016/j.jcp.2016.02.003 · Cited by 63
Fluid dynamics model on fluidized bed gasifier using agro-industrial biomass as fuel
Ismail, T. M., El-Salam, M. A., Monteiro, E., & Rouboa, A. I. (2017) · Waste Management · doi:10.1016/j.wasman.2017.06.018 · Cited by 63
Simulation of the agglomeration in a spray using Lagrangian particle tracking
Guo, B., Fletcher, D. F., & Langrish, T. A. G. (2003) · Applied Mathematical Modelling · doi:10.1016/s0307-904x(03)00133-1 · Cited by 62
Almohammed, N., & Breuer, M. (2016) · Powder Technology · doi:10.1016/j.powtec.2015.12.034 · Cited by 62
Self-citationMunicipal solid waste gasification in semi-industrial conditions using air-CO2 mixtures
Couto, N. D., Silva, V. B. R. E., & Rouboa, A. I. (2016) · Energy · doi:10.1016/j.energy.2016.03.088 · Cited by 62
The chemical CO2 capture by carbonation-decarbonation cycles
Liu, J., Baeyens, J., Deng, Y., Tan, T., & Zhang, H. (2020) · Journal of Environmental Management · doi:10.1016/j.jenvman.2019.110054 · Cited by 62
Neau, H., Pigou, M., Fede, P., et al. (2020) · Powder Technology · doi:10.1016/j.powtec.2020.03.010 · Cited by 62
Multiscale Eulerian CFD of Chemical Processes: A Review
Ngo, S. I., & Lim, Y. (2020) · ChemEngineering · doi:10.3390/chemengineering4020023 · Cited by 62
Models of agglomerate growth in fluidized bed reactors: Critical review, status and applications
Khadilkar, A. B., Rozelle, P. L., & Pisupati, S. V. (2014) · Powder Technology · doi:10.1016/j.powtec.2014.04.063 · Cited by 61
Tabib, M., Johansen, S. T., & Amini, S. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie302028s · Cited by 61
Development of data-driven filtered drag model for industrial-scale fluidized beds
Jiang, Y., Chen, X. D., Kolehmainen, J., Kevrekidis, I. G., Özel, A., & Sundaresan, S. (2020) · Chemical Engineering Science · doi:10.1016/j.ces.2020.116235 · Cited by 61
Investigation of droplet collisions for solutions with different solids content
Kuschel, M., & Sommerfeld, M. (2013) · Experiments in Fluids · doi:10.1007/s00348-012-1440-z · Cited by 60
Experimental and simulation study of heat transfer in fluidized beds with heat production
Li, Z., Janssen, T. C. E., Buist, K. A., Deen, N. G., Annaland, M. V. S., & Kuipers, J. A. M. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.02.055 · Cited by 60
CFD simulation of combustible solid waste pyrolysis in a fluidized bed reactor
Ding, K., Xiong, Q., Zhong, Z., Zhong, D., & Zhang, Y. (2019) · Powder Technology · doi:10.1016/j.powtec.2019.12.011 · Cited by 60
Jašo, S., Arellano‐García, H., & Wozny, G. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.03.077 · Cited by 59
Park, H. C., & Choi, H. S. (2019) · Renewable Energy · doi:10.1016/j.renene.2019.05.072 · Cited by 59
CFD modeling and experimental validation of biomass fast pyrolysis in a conical spouted bed reactor
Hooshdaran, B., Haghshenasfard, M., Hosseini, S. H., Esfahany, M. N., López, G., & Olazar, M. (2020) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2020.105011 · Cited by 59
Discrete-particle simulations of cohesive granular flow using a square-well potential
Weber, M. W., Hoffman, D. K., & Hrenya, C. M. (2004) · Granular Matter · doi:10.1007/s10035-004-0179-5 · Cited by 57
Modelling spray coating using a combined CFD–DEM and spherical harmonic formulation
Hilton, J. E., Ying, D., & Cleary, P. W. (2013) · Chemical Engineering Science · doi:10.1016/j.ces.2013.05.051 · Cited by 57
A CFD-DEM-IBM method for Cartesian grid simulation of gas-solid flow in complex geometries
Zhao, P., Xu, J., Ge, W., & Wang, J. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124343 · Cited by 56
Che, Y., Tian, Z., Liu, Z., Zhang, R., Gao, Y., Zou, E., Wang, S., & Liu, B. (2015) · Powder Technology · doi:10.1016/j.powtec.2015.07.049 · Cited by 55
Liu, S., & Xiao, W. (2014) · Chemical Engineering Science · doi:10.1016/j.ces.2014.02.021 · Cited by 55
Oschmann, T., Schiemann, M., & Kruggel‐Emden, H. (2015) · Powder Technology · doi:10.1016/j.powtec.2015.12.008 · Cited by 55
Hwang, I. S., Jeong, H. J., & Hwang, J. (2019) · Powder Technology · doi:10.1016/j.powtec.2019.08.008 · Cited by 55
Fluidization of nano and sub-micron powders using mechanical vibration
Kaliyaperumal, S., Barghi, S., Briens, L. A., et al. (2011) · Particuology · doi:10.1016/j.partic.2011.03.003 · Cited by 54
Mellin, P., Zhang, Q., Kantarelis, E., & Yang, W. (2013) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.04.054 · Cited by 54
Carlo, A. D., Bocci, E., Zuccari, F., & Dell’Era, A. (2010) · Industrial & Engineering Chemistry Research · doi:10.1021/ie900748t · Cited by 54
Assessment of devolatilization schemes in predicting product yields of biomass fast pyrolysis
Xiong, Q., Aramideh, S., & Kong, S. (2014) · Environmental Progress & Sustainable Energy · doi:10.1002/ep.11922 · Cited by 53
An experimental and numerical study on the Miscanthus gasification by using a pilot scale gasifier
Couto, N. D., Silva, V. B. R. E., Monteiro, E., Rouboa, A. I., & Brito, P. (2017) · Renewable Energy · doi:10.1016/j.renene.2017.03.028 · Cited by 53
Zhou, T., Yang, S., Wei, Y., Hu, J., & Wang, H. (2019) · Renewable Energy · doi:10.1016/j.renene.2019.10.059 · Cited by 53
Zhu, X., Dong, P., Tu, Q., et al. (2020) · Powder Technology · doi:10.1016/j.powtec.2020.02.047 · Cited by 53
Kollar, L. E., Farzaneh, M., & Karev, A. R. (2004) · International Journal of Multiphase Flow · doi:10.1016/j.ijmultiphaseflow.2004.08.007 · Cited by 52
The collision efficiency in a shear flow
Balakin, B. V., Hoffmann, A. C., & Kosinski, P. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2011.09.042 · Cited by 52
Near Zero CO2 Emissions in Coal Firing with Oxy‐Fuel Circulating Fluidized Bed Boiler
Myöhänen, K., Hyppänen, T., Pikkarainen, T., Eriksson, T., & Hotta, A. (2009) · Chemical Engineering & Technology · doi:10.1002/ceat.200800566 · Cited by 52
Liu, Y., & Hinrichsen, O. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie500774s · Cited by 51
Tamrakar, A., & Ramachnadran, R. (2019) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2019.01.023 · Cited by 51
Kuipers, J. A. M., Tammes, H., Prins, W., et al. (1992) · Powder Technology · doi:10.1016/0032-5910(92)88008-6 · Cited by 50
Flow-regime transitions in fluidized beds of non-spherical particles
Kruggel‐Emden, H., & Vollmari, K. (2016) · Particuology · doi:10.1016/j.partic.2016.01.004 · Cited by 50
Solar gasification of biomass in a dual fluidized bed
Suárez-Almeida, M., Gómez‐Barea, A., Ghoniem, A. F., & Pfeifer, C. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126665 · Cited by 50
Breault, R. W., & Huckaby, E. D. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.06.008 · Cited by 48
Liu, B., Papadikis, K., Gu, S., Fidalgo, B., Longhurst, P., Li, Z., & Kolios, A. (2017) · Fuel Processing Technology · doi:10.1016/j.fuproc.2017.04.012 · Cited by 48
Flue Gas Desulphurization in Circulating Fluidized Beds
Deng, Y., Ansart, R., Baeyens, J., & Zhang, H. (2019) · Energies · doi:10.3390/en12203908 · Cited by 48
Qiu, G., Ye, J., & Wang, H. (2015) · Chemical Engineering Science · doi:10.1016/j.ces.2015.05.036 · Cited by 47
Three-dimensional modeling of olive cake combustion in CFB
Zhong, W., Xie, J., Shao, Y., Liu, X., & Jin, B. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.10.086 · Cited by 47
Yao, Y. D., Su, J., & Luo, Z. (2014) · Powder Technology · doi:10.1016/j.powtec.2014.11.037 · Cited by 47
Shi, X., Wu, Y., Lan, X., et al. (2015) · Powder Technology · doi:10.1016/j.powtec.2015.06.049 · Cited by 47
Cited by
A review of recent development for the CFD-DEM investigations of non-spherical particles
Ma, H., Zhou, L., Liu, Z., Chen, M., Xia, X., & Zhao, Y. (2022) · Powder Technology · doi:10.1016/j.powtec.2022.117972 · Cited by 286
Metadata
- Authors
- Alobaid, F., Almohammed, N., Massoudi Farid, M., May, J., Rößger, P., Richter, A., & Epple, B.
- Venue
- Progress in Energy and Combustion Science
- Publisher
- Elsevier BV
- Published
- 2022-07
- Volume
- 91
- Pages
- 100930
- ISSN
- 0360-1285 (ISSN-L)
- OpenAlex
- W4200111462
- Cited by
- 266
- References
- 517
- FWCI
- 20.91
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.